Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONDUCTIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Simulation of two nanoparticle melting to understand the conductivity drop of 3D-printed silver nanowires

The future flexible sensor technology will require low-temperature, fast processing 3D printing techniques that will rely heavily on the quality of nanoparticle (NP) Ink. Electrical conductivity has been found to decrease in majority of the 3D printed electronic wires. Herein we report a fundamental understanding in drop of electrical conductivity in processed silver (Ag) line wire, generally found in Ag-nanoparticle Ink, using large-scale atomistic molecular dynamics (MD) simulations of sintering of five different sizes of Ag NPs. To preserve the high conductivity of pure silver wires, the integrity of the pristine face-centered cubic (FCC) crystalline structure must be retained in the processed line wires. Simulations show that the pristine Ag FCC structures of the nanoparticles are not recovered after melting and resolidification, instead, the resolidified material is paracrystaline. The breakdown of pristine FCC structures might be the cause of the drop in conductivity of processed Ag wires. Simulation results suggest that the intermediate size nanoparticles retain highest percentage of the pristine silver face-centered cubic (FCC) structure after pulse treatments. Our results show that the most promising Ag-Ink should contain smaller to medium size silver NPs that can retain FCC structure after 3D printing of the Ag-Ink.

42 ENGINEERING↗

Influence of anionic vacancies on the ionic conductivity of silicated rare earth apatites

Oxyapatites are very promising materials in terms of ionic conductivity. They can be considered as a potential electrolyte for Solid Oxide Fuel Cells (SOFC). Doped silicated rare earth apatites with formula La{sub 9.33-x}Ca{sub x}(SiO{sub 4}){sub 6}O{sub 2-x/2} (0 {<=} x {<=} 1) have been prepared by solid state reaction at high temperature in order to determine the influence of anionic vacancies on the electrical properties of the material. The incorporation of calcium in the structure has been checked by characterizations of the powders (X-ray diffraction, helium pycnometry). The cell parameters of the hexagonal apatite were refined. Samples were sintered at 1550 deg. C. Electrical properties of each composition have been studied between 280 and 620 deg. C by the complex impedance method. The evolution of the bulk conductivity and of the activation energy with the substituting ratio gives information on the conductivity mechanism in these materials. An improvement of ionic conductivity about one order of magnitude has been observed for low calcium substitution ratios.

36 MATERIALS SCIENCE↗

Synthesis of Ga-doped Ge-based apatites: Effect of dopant and cell symmetry on oxide ion conductivity

Apatite-type rare earth silicates/germanates are attracting significant interest as a new class of oxide ion conductors. For the germanates, La{sub 9.33+x}(GeO{sub 4}){sub 6}O{sub 2+3x/2}, it has been shown that, depending on composition, the cell can be either hexagonal or triclinic, with evidence for reduced low temperature conductivities for the latter, attributed to increased defect trapping in this lower symmetry cell. In this paper the effect of Ga doping on the cell symmetry and conductivity is reported, with the observation of triclinic cells across the series La{sub 10}(GeO{sub 4}){sub 6-x}(GaO{sub 4}){sub x}O{sub 3-x/2}. Through co-doping with Y on the La site, i.e. La{sub 8}Y{sub 2}(GeO{sub 4}){sub 6-x}(GaO{sub 4}){sub x}O{sub 3-x/2}, it is shown that hexagonal cells are obtained, and the dependence of the conductivity on oxygen content/Ga content is discussed. In particular it is shown that the stabilisation of the hexagonal cell through Y doping enhances the low temperature conductivity.

36 MATERIALS SCIENCE↗

Conductive methyl blue-functionalized reduced graphene oxide with excellent stability and solubility in water

Graphical abstract: MB-rGO was synthesized by making use of {pi} stacking and water-solubility of MB to assist the hydrazine mediated reduction of graphene oxide (GO) in aqueous solution. The resulting MB-rGO shows excellent solubility and stability in aqueous solution, and the electrical conductivity of MB-rGO is almost two orders of magnitude larger than that of GO. Highlights: Black-Right-Pointing-Pointer Methyl blue (MB) stacks onto the plane of reduced graphene oxide (rGO) by strong {pi}-{pi} interactions. Black-Right-Pointing-Pointer Sulfo groups of MB prevent rGO from aggregating by electrostatic and steric repulsions. Black-Right-Pointing-Pointer MB-functionalized rGO (MB-rGO) shows excellent solubility and stability in aqueous solution. Black-Right-Pointing-Pointer Electrical conductivity of MB-rGO is almost two orders of magnitude larger than that of GO. -- Abstract: {pi} stacking and water-solubility of methyl blue (MB) are expected to facilitate the hydrazine mediated reduction of graphene oxide (GO) in aqueous environment. Our newly obtained MB-functionalized reduced graphene oxide (MB-rGO) exhibited excellent solubility and stability in water. The results showed that the MB molecules stacked non-covalently onto the basal plane of rGO while the sulfo groups of MB prevented the rGO from aggregation. In addition, the better electrical conductivity of MB-rGO than that of GO was analyzed. This novel conductive MB-rGO should have promising applications in diverse nanotechnological areas, such as electronic and optoelectronic devices, photovoltaics, sensors, and microfabrication.

36 MATERIALS SCIENCE↗

Role of WO{sub 3} on DC conductivity and some optical properties of TeO{sub 2} based glasses

Graphical abstract: Display Omitted Highlights: ► TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system was prepared using melt quenching method. ► DC conductivity, FESEM, EDS and optical absorption studies were carried out. ► Non bridging oxygens (NBOs) are increases with increase of WO{sub 3} content. ► Increase in NBOs is responsible for the increase in the refractive index of glasses. ► Two charge transport mechanisms are coexist in these glasses. -- Abstract: DC electrical conductivity and optical absorption studies have been employed to understand the influence of WO{sub 3} content on the electrical and optical properties of the TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system. Field emission scanning electron microscope (FESEM), Energy dispersive X-ray spectrometry (EDS) measurements have been used to confirm the glassy nature and the elemental analysis of the glass composition, respectively. DC electrical conductivity of the glasses was studied in the temperature range 423–613 K. From Arrhenius plot, the activation energies (E{sub act}) of all the glasses have been calculated and conduction mechanism has been discussed in terms of structural changes occurred with the addition of WO{sub 3} content. The optical properties such as optical band gap (E{sub opt}), Urbach energy (ΔE), molar refraction (R{sub M}), metallization criterion (M), electronic polarizability of the oxide ion (α{sub O{sup 2}{sup −}}) and refractive index (n) have been determined from optical absorption data and were found to be composition dependent.

36 MATERIALS SCIENCE↗

Electric conductivity analysis and dielectric relaxation behavior of the hybrid polyvanadate (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}]

Highlights: ► Plate-like crystals (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] were synthesized. ► Frequency and temperature dependence of AC conductivity indicate CBH model. ► The temperature dependence of DC conductivity exhibits two conduction mechanisms. - Abstract: Layered hybrid compound (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] has been synthesized via hydrothermal method. Techniques X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and impedance spectroscopy have been used to characterize the hybrid material. Electrical and dielectric properties dependence on both temperature and frequency of the compound have been reported. The direct current conductivity process is thermally activated and it is found to be 12.67 × 10{sup −4} Ω{sup −1} m{sup −1} at 523 K. The spectra follow the Arrhenius law with two activation energy 0.25 eV for T < 455 K and 0.5 eV for T > 455 K.

36 MATERIALS SCIENCE↗

Phase transformation, thermal expansion and electrical conductivity of lanthanum chromite

Graphical abstract: - Highlights: • Orthorhombic and rhombohedral phases co-exist at ≥260 °C and cubic above 1000 °C. • Polymorphic changes with temperature in air and Ar–3%H{sub 2} are observed. • Lattice volume change in Ar–3%H{sub 2} atmosphere corresponds to Cr{sup 4+} → Cr{sup 3+} transition. • Change in valence state of Cr{sup 4+} to Cr{sup 3+} results in lower electrical conductivity. • Experimental evidence is provided for poor densification of LaCrO{sub 3} in air. - Abstract: This paper addresses discrepancies pertaining to structural, thermal and electrical properties of lanthanum chromite. Experimental evidence is provided to support the hypothesis for poor densification in air as well as reduction in electrical conductivity in reducing atmosphere. Sintering condition for the synthesis of LaCrO{sub 3} was optimized to 1450 °C and 10 h. Thermo-analytical (differential scanning calorimetry – DSC) and high temperature X-ray diffraction (HT-XRD) studies show that orthorhombic lanthanum chromite transforms into rhombohedral structure at ∼260 °C and cubic structure above 1000 °C. Co-existence of the structural phases and the variation in each polymorph with temperature in both air and 3%H{sub 2}–Ar atmosphere is reported. Presence and absence of Cr-rich phase at inter-particle neck are observed in oxidizing and reducing atmospheres respectively. The linear thermal expansion co-efficient was calculated to be 10.8 ± 0.2 × 10{sup −6} °C{sup −1} in the temperature range of RT–1400 °C. Electrical conductivity of lanthanum chromite was found to be 0.11 S/cm in air. A decrease in electrical conductivity (0.02 S/cm at 800 °C) of LaCrO{sub 3}, as observed in reducing atmosphere (3%H{sub 2}–Ar), corresponds to lattice volume change as indicated by peak shift in HT-XRD results.

36 MATERIALS SCIENCE↗

Thermal conductivity studies of novel nanofluids based on metallic silver decorated mesoporous silica nanoparticles

Graphical abstract: - Highlights: • Metallic silver was decorated in mSiO{sub 2} with grafted hemiaminal functional groups. • Synthesized nanoparticles were used for preparation of glycerol based nanofluids. • The effect of temperature, weight fraction of mSiO{sub 2} and concentration of silver nanoparticles on thermal conductivity of nanofluids was investigated. - Abstract: In the present study, the mesoporous structure of silica (mSiO{sub 2}) nanoparticles as well as hemiaminal grafted mSiO{sub 2} decorated by metallic silver (Ag/mSiO{sub 2}) has been used for the preparation of glycerol based nanofluids. Structural and morphological characterization of the synthesized products have been carried out using Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD), UV–vis spectroscopy, inductively coupled plasma (ICP) and N{sub 2} adsorption–desorption isotherms. The thermal conductivity and viscosity of the nanofluids have been measured as a function of temperature for various weight fractions and silver concentrations of mSiO{sub 2} and Ag/mSiO{sub 2} nanoparticles, respectively. The results show that the thermal conductivity of the nanofluids increase up to 9.24% as the weight fraction of mSiO{sub 2} increases up to 4 wt%. Also, increasing the percent of the silver decorated mSiO{sub 2} (Ag/mSiO{sub 2}) up to 2.98% caused an enhancement in the thermal conductivity of the base fluid up to 10.95%. Furthermore, the results show that the nanofluids have Newtonian behavior in the tested temperature range for various concentrations of nanoparticles.

36 MATERIALS SCIENCE↗

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

36 MATERIALS SCIENCE↗

Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy

Highlights: • Al-Mn-Si specimens were underwent severe plastic deformation by CGP and cold-rolling and their combined routes. • Microscopical observations depicted particles' fragmentation and non-preferential distribution under heavy straining. • XRD analysis revealed dislocations annihilation and lattice swelling (d-spacing increase) due to dynamic recrystallization. • Polarization outputs disclosed direct correlation of corrosion behavior with dislocations density. • Four-point probe test proved that electrical conductivity was a function of lattice d-spacing. - Abstract: Al-Mn-Si specimens were underwent SPD by CGP, cold-rolling and their combined paths. Acquired OM and SEM micrographs revealed that random distribution of intermetallic precipitates beside their fragmentation under heavy imposed strains deteriorated particles’ influence on the electrochemical corrosion and inhibited pitting. Analysis of XRD patterns pointed out that post-rolling of CGPed sheets resulted in dynamic annihilation of dislocations and accordingly crystal lattice swelling (d-spacing increase) due to dynamic recrystallization. From polarization results, crystallites’ refinement along with density increment of sub-grain boundaries within structure as a consequence of SPD beside dislocation density enhancement accelerated corrosion. Outputs of four-point probe electrical conductivity examination indicated that apart from the employed processing, lattice compaction and atomic layers approach would limit the electrons’ mobility space and hence reduce the conductivity of material. In this regard, combined effects of CGP and rolling as employed dual-straining route on Al-Mn-Si alloy enhanced the electrical conductivity by d-spacing growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical conductivity of porous binary powder mixtures

Simultaneous data of the quasi-static compaction and electrical conductivity of porous, binary powder mixtures have been collected as a function of bulk density. The powder mixtures consist of a metal conductor, either titanium or iron, an insulator, and pores filled with ambient air. The data show a dependency of the conductivity in terms of relative bulk density and metal volume fraction on conductor type and conductor particle characteristics of size and shape. Finally, finite element models using particle domains generated by discrete element method are used to simulate the bulk conductivity near its threshold while the general effective media equation is used to model the conductivity across the compression regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scattering of phonons by edge dislocation and thermal conductivity of nanocrystalline silicon

For this work, the temperature dependent thermal conductivity of nanocrystalline silicon with the grain size of 500 nm, 144 nm, and 76 nm, was calculated based on the intrinsic phonon properties using a first-principles-based method and recent analytical theory of phonon-dislocation scattering. The results demonstrate, in the nanocrystalline silicon, that the low temperature (T) limit of thermal conductivity is directly proportional to T 2 instead of the conventional Casimir limit of T 3 . Calculated frequency-dependent scattering rates also indicate regimes of dominant scattering mechanisms: frequency-independent boundary scattering dominates in the very low phonon frequency regime of less than 0.6 THz; frequency-dependent boundary scattering dominates in the intermediate phonon frequency regime between 0.6 and 6 THz; and Umklapp scattering dominates in the high phonon frequency regime beyond 6 THz. The thermal conductivity is linear proportional to nanograin size in the region of d < 100nm and it shows independence at d > 1μm. This work proves the importance of dislocation-phonon scattering to thermal conductivity when the size of nanograins is small or at low temperature.

36 MATERIALS SCIENCE↗

Atomistic insights into the synergistic effects of tensile strain and hydroxyl group on increasing the thermal conductivity of monohydric alcohols as latent heat storage materials

The low thermal conductivity of linear monohydric alcohols significantly limits their performance when used as latent heat storage materials. It was found that imposing certain mechanical strains on nanomaterials with highly ordered structures can lead to appreciable thermal conductivity enhancement. To explore the potential of enhancing the intrinsic thermal conductivity of monohydric alcohols, a simplified ideal crystal model was employed for molecular arrangement in this work. The variation of atomistic heat transfer as a function of tensile strains was exploited by non-equilibrium molecular dynamics simulations. Furthermore, the influence of stretching on the vibration density of states and the corresponding molecular morphology were revealed. The results suggested that the thermal conductivity of monohydric alcohols with such simplified ideal crystalline structures can increase by about 170 % at the strain of 0.1. The distance between neighboring interfaces was found to determine the energy of inter-molecular interactions at the crystal grain boundaries. The hydrogen bonds energy has not reached the critical value when increasing tensile strains from 0 to 0.1. In contrast, the strongest van der Walls interactions for alkanes were obtained at the strain of 0.06 where the interfacial distances of alkanes have achieved their equilibrium distances. In addition, the interfacial heat transfer coefficient of ideal crystal monohydric alcohols at hydroxyl interfaces was found to be threefold than that between methyl interfaces, in consistent with the strength of inter-molecular interactions between functional groups at the interfaces.

36 MATERIALS SCIENCE↗

Giant anisotropic in-plane thermal conduction induced by Anomalous phonons in pentagonal PdSe 2

In two-dimensional materials, different atomic stacking induces anisotropic atomic interactions and phonon dispersions, leading to the anisotropy of in-plane thermal transport. In this work, we report an exceptional case in layered pentagonal PdSe 2 , where the bonding, force constants, and lattice constants are nearly-equal along the in-plane crystallographic axis directions, while the thermal conductivity is surprisingly much greater along b-axis than along a-axis with a ratio up to 1.8. Such strong anisotropy is not only unexpected in in-plane uniform structured materials, but also 2 comparable to the record high in-plane anisotropic thermal conductivity in the nonuniform structured material reported to date (the ratio is ~2.0 in TiS 3 ). By combining the inelastic X-ray scattering measurement and the first-principles calculations, we attribute such high anisotropy to the low-energy phonons along a-axis, particularly their lower group velocities and “avoided-crossing” behavior. The different buckling structures between a- (zigzag-type) and b-axis (flat-type) are mainly responsible for such unique phonon dynamics properties of PdSe 2 . This finding helps to discover materials with high anisotropic in-plane thermal conductivity in uniform structures and reveals new physics of anisotropy of in-plane thermal conduction. Due to the unique features in structure and thermal transport properties, PdSe 2 may serve as a new platform for designing novel devices to route heat flow precisely at the nanoscale.

36 MATERIALS SCIENCE↗

Effect of Sn oxides on the thermal conductivity of polycrystalline SnSe

SnSe is a promising thermoelectric material, with intrinsically low lattice thermal conductivity, κL. Surprisingly, in several reports, polycrystalline samples are found to have a higher thermal conductivity than single crystals. This disparity has been attributed to trace amounts of thermally conductive Sn oxides at the grain boundaries of polycrystalline samples. The same culprit was recently proposed to explain the reduction of κL in purified, oxide-free, SnSe polycrystals. Here, we test this hypothesis by: (i) tuning the type of oxide in SnSe by exploiting thermodynamic stability regions, since Sn-rich or Sn-poor compositions favour the formation of SnO or SnO 2 , respectively; and (ii) varying the quantity of SnO 2 by intentionally oxidizing SnSe powder before consolidation, to obtain samples with quantifiable amounts - up to 15% - of SnO 2 . We find that the κL of SnSe is impervious to changes in the type or the amount of Sn oxide present in the samples. Our results show that a simple “rule of mixtures” cannot be used to estimate the effect of grain boundary oxides on the thermal conductivity of SnSe. These results call for an improved understanding of the intriguing thermal transport mechanisms in SnSe and numerous other systems where a two-phase transport is presumed.

36 MATERIALS SCIENCE↗

Engineering Electrical Conductivity in Stable Zirconium-Based PCN-222 MOFs with Permanent Mesoporosity

Electrically conductive metal–organic frameworks (MOFs) featuring zirconium-based nodes are of great interest for electrochemical and optoelectronic applications due to their exceptional thermal and chemical stability, although the number of such MOFs remains limited. Here in this paper, we demonstrate that electron deficient molecules such as transition metal(IV) bis(dicarbollide) (TM IV (C 2 B 9 H 11 ) 2 ; TM IV CB for short, where TM = Ni, Pd, and Pt) or C 60 , spatially infiltrated in the microporous channels of the zirconium-based porphyrinic MOFs PCN-222 and PCN-222-Zn, generate highly stable and electrically conductive frameworks in which the mesopores remain accessible to other guests. Solid-state density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations indicate incorporation of Ni IV CB and C 60 in the MOF micropores is energetically and structurally feasible. Interestingly, in contrast to the free species, strong donor–acceptor interactions between the MOF and Ni IV CB restrain it to a single conformation. Calculated electronic structures and charge-hopping conduction probabilities illustrate that efficient charge-transfer (CT) from photoexcited linkers to the guest molecules facilitates charge hopping in the framework, making the MOFs electrically conductive. The donor–acceptor conjugates also enhance exciton dissociation at their heterojunctions, fostering the formation of long-lived electron-trapped states with potential utility for photo- and electrochemical devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Conductivity of Hexa-Zirconium(IV) Metal–Organic Frameworks by Encapsulating Heterofullerenes

Electrical conductivity in metal–organic frameworks (MOFs) has a great potential for energy storage applications and electrocatalysis. Zirconium-based MOFs such as NU-901 and NU-1000 have a low electrical conductivity due to the redox innocence of Zr–oxo bonds. Recently, it has been shown that the electrical conductivity of NU-901 can be increased by 11 orders of magnitude by physically encapsulating fullerene (C 60 ) in its diamond pore. This effect is due to the host–guest interaction between the electron-rich 1,3,6,8-tetrakis(p-benzoate)pyrene (TBAPy 4– ) organic linkers of NU-901 (host) and the electron-poor fullerene (guest). Herein, we used density functional theory to study heterofullerene (C 59 X; X = B, Al, Ga, In, Si, Ge, and Sn) encapsulation in NU-901. Furthermore, our study suggests that encapsulated heterofullerenes enhance the electrical conductivity of the NU-901 MOF even further than C 60 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex Relationship between Side-Chain Polarity, Conductivity, and Thermal Stability in Molecularly Doped Conjugated Polymers

Molecularly doped conjugated polymers with polar side chains are an emerging class of conducting materials exhibiting enhanced and thermally stable conductivity. In this work, we study the electronic conductivity (σ) and the corresponding thermal stability of two polythiophene derivatives comprising oligoethylene glycol side chains: one having oxygen attached to the thiophene ring (poly(3-(methoxyethoxyethoxy)thiophene) (P3MEET)) and the other having a methylene spacer between the oxygen and the thiophene ring (poly(3-(methoxyethoxyethoxymethyl)thiophene) (P3MEEMT)). Thin films were vapor-doped with fluorinated derivatives of tetracyanoquinodimethane (FnTCNQ, n = 4, 2, 1) to determine the role of dopant strength (electron affinity) in maximum achievable σ. Specifically, when vapor doping with F 4 TCNQ, P3MEET achieved a substantially higher σ of 37.1 ± 10.1 S/cm compared to a σ of 0.82 ± 0.06 S/cm for P3MEEMT. Structural characterization using a combination of X-ray and optical spectroscopy reveals that the higher degree of conformational order of polymer chains in the amorphous domain upon doping with F 4 TCNQ in P3MEET is a major contributing factor for the higher σ of P3MEET. Additionally, vapor-doped P3MEET exhibited superior thermal stability compared to P3MEEMT, highlighting that the presence of polar side chains alone does not ensure higher thermal stability. Molecular dynamics simulations indicate that the dopant–side-chain nonbond energy is lower in the P3MEET:F 4 TCNQ mixture, suggesting more favorable dopant–side-chain interaction, which is a factor in improving the thermal stability of a polymer/dopant pair. Our results reveal that additional factors such as polymer ionization energy and side-chain–dopant interaction should be taken into account for the design of thermally stable, highly conductive polymers.

36 MATERIALS SCIENCE↗