Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Similarities and distinctions of defect production by fast electron and proton irradiation: Moderately doped silicon and silicon carbide of n-type

Effects of irradiation with 0.9 MeV electrons as well as 8 and 15 MeV protons on moderately doped n-Si grown by the floating zone (FZ) technique and n-SiC (4H) grown by chemical vapor deposition are studied in a comparative way. It has been established that the dominant radiation-produced defects with involvement of V group impurities differ dramatically in electron- and proton-irradiated n-Si (FZ), in spite of the opinion on their similarity widespread in literature. This dissimilarity in defect structures is attributed to a marked difference in distributions of primary radiation defects for the both kinds of irradiation. In contrast, DLTS spectra taken on electron- and proton-irradiated n-SiC (4H) appear to be similar. However, there are very much pronounced differences in the formation rates of radiation-produced defects. Despite a larger production rate of Frenkel pairs in SiC as compared to that in Si, the removal rates of charge carriers in n-SiC (4H) were found to be considerably smaller than those in n-Si (FZ) for the both electron and proton irradiation. Comparison between defect production rates in the both materials under electron and proton irradiation is drawn.

36 MATERIALS SCIENCE↗

Calculation of the Schottky barrier and current–voltage characteristics of metal–alloy structures based on silicon carbide

A simple but nonlinear model of the defect density at a metal–semiconductor interface, when a Schottky barrier is formed by surface defects states localized at the interface, is developed. It is shown that taking the nonlinear dependence of the Fermi level on the defect density into account leads to a Schottky barrier increase by 15–25%. The calculated barrier heights are used to analyze the current–voltage characteristics of n-M/p-(SiC){sub 1–x}(AlN){sub x} structures. The results of calculations are compared to experimental data.

36 MATERIALS SCIENCE↗

Effect of Chemical Treatment of a Silicon Surface on the Quality and Structure of Silicon-Carbide Epitaxial Films Synthesized by Atom Substitution

The fundamentals of a new technique for the cleaning and passivation of (111), (110), and (100) silicon wafer surfaces by hydride groups, which ensure a high surface purity and smoothness at the nanoscale upon long-term storage of the wafers at room temperature in air, are discussed. A new composition of the passivation solution for the long-term antioxidation protection of silicon surfaces is developed. The proposed solution is suitable for the long-term storage and repeated passivation of silicon wafers. The composition of the passivation solution and the conditions of passivation of the silicon wafers in it are described. Silicon wafers treated using the proposed technique can be used for growing epitaxial semiconductor films and different nanostructures. It is shown that only silicon surfaces prepared in this way allow SiC epitaxial films on silicon to be grown by atom substitution. The experimental dependences of the SiC and GaN film structures grown on silicon on the silicon-surface etching conditions are presented. The developed technique for silicon cleaning and passivation can both be used under laboratory conditions and easily adapted for the industrial production of silicon wafers with an oxidation-resistant surface coating.

36 MATERIALS SCIENCE↗

Microscopic Description of the Mechanism of Transition between the 2H and 4H Polytypes of Silicon Carbide

Abstract—: The mechanism of displacement of one close-packed SiC layer from one minimum position to another on the example of SiC polytype transition 2H → 4H has been studied by ab initio methods. It has been shown that the intermediate state with monoclinic symmetry Cm greatly facilitates this displacement breaking it into two stages. Initially, the Si atom chiefly moves, only then—mainly the C atom. In this case, the Si–C bond is significantly tilted in comparison with the initial position, which allows the reducing of the compression of the SiC bonds in the (11 2-bar 0) plane. Two transition states of this process, which also possess the Cm symmetry, have been computed. It has been found that the height of the activation barrier of the process of moving the close-packed layer of SiC from one position to another is equal to 1.8 eV. The energy profile of this movement has been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of boron carbide near the boron K edge evaluated by soft-x-ray reflectometry from a Ru/B4C multilayer

Soft-x-ray Bragg reflection from two Ru/B4C multilayers with 10 and 63 periods was used for independent determination of both real and imaginary parts of the refractive index n = 1 -{delta} + i{beta} close to the boron K edge ({approx}188 eV). Prior to soft x-ray measurements, the structural parameters of the multilayers were determined by x-ray reflectometry using hard x rays. For the 63-period sample, the optical properties based on the predictions made for elemental boron major deviations were found close to the K edge of boron for the 10-period sample explained by chemical bonding of boron to B4C and various boron oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extreme Environment Silicon Carbide Hybrid Temperature & Pressure Optical Sensors

This final report contains the main results from a 3-year program to further investigate the merits of SiC-based hybrid sensor designs for extreme environment measurements in gas turbines. The study is divided in three parts. Part 1 studies the material properties of SiC such as temporal response, refractive index change with temperature, and material thermal response reversibility. Sensor data from a combustion rig-test using this SiC sensor technology is analyzed and a robust distributed sensor network design is proposed. Part 2 of the study focuses on introducing redundancy in the sensor signal processing to provide improved temperature measurement robustness. In this regard, two distinct measurement methods emerge. A first method uses laser wavelength sensitivity of the SiC refractive index behavior and a second method that engages the Black-Body (BB) radiation of the SiC package. Part 3 of the program investigates a new way to measure pressure via a distance measurement technique that applies to hot objects including corrosive fluids.

36 MATERIALS SCIENCE↗

ANALYTICAL NEUTRONIC STUDIES CORRELATING FAST NEUTRON FLUENCE TO MATERIAL DAMAGE IN CARBON, SILICON, AND SILICON CARBIDE

This study evaluates how fast neutron fluence >0.1 MeV correlates to material damage (i.e., the total fluence spectrum folded with the respective material’s displacements-per- atom [dpa] damage response function) for the specific material fluence spectra encountered in Next Generation Nuclear Plant (NGNP) service and the irradiation tests conducted in material test reactors (MTRs) for the fuel materials addressed in the white paper. It also reports how the evaluated correlations of >0.1 MeV fluence to material damage vary between the different spectral conditions encountered in material service versus testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Silicon Carbide Derived Carbons: Experiments and Modeling

The main results of the computational modeling was: 1. Development of a new genealogical algorithm to generate vacancy clusters in diamond starting from monovacancies combined with energy criteria based on TBDFT energetics. The method revealed that for smaller vacancy clusters the energetically optimal shapes are compact but for larger sizes they tend to show graphitized regions. In fact smaller clusters of the size as small as 12 already show signatures of this graphitization. The modeling gives firm basis for the slit-pore modeling of porous carbon materials and explains some of their properties. 2. We discovered small vacancy clusters and their physical characteristics that can be used to spectroscopically identify them. 3. We found low barrier pathways for vacancy migration in diamond-like materials by obtaining for the first time optimized reaction pathways.

36 MATERIALS SCIENCE↗

Neutron Measurements from Boron Carbide Addition to a Plutonium Waste Form

The Department of Energy (DOE) has identified the Dilute and Dispose approach as the preferred method for the disposition of surplus plutonium materials. Dilute and Dispose requires surplus plutonium to be converted to an oxide product and then dry blended with a multi-component adulterant mixture to reduce the Safeguards and Security attractiveness level of the materials. The resulting product will be discarded in a geologic repository at the Waste Isolation Pilot Plant (WIPP).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Benchmark Analysis for the Optical Dilatometry Method Using Silicon Carbide Temperature Monitors

The main objective of this project was to conduct a benchmark analysis for the optical dilatometry method by using NSUF’s SiC temperature monitors: two (2) SiC temperature monitors provided by NSUF’s BSU-8242 experiment and two (2) SiC temperature monitors provided by NSUF’s GE-Hitachi experiment. Per the BSU-8242 experiment, KGT-3597 and KGT-3591 had a design temperature of 400°C and an exposure of 3 dpa. Per the GE-Hitachi experiment, KGT-3341 and KGT-3336 had a design temperature of 290°C +/- 50°C and an exposure of 0.5–1 dpa. The KGT-3336 SiC monitor was split into two pieces during the decontamination process, making the dilatometry method the only way to analyze both those pieces. The BSU-8242 monitors revealed peak irradiation temperatures under the design temperature, and the GE-Hitachi monitors revealed peak irradiation temperatures within the design temperature range. The optical dilatometry method measured the peak irradiation temperature of BSU-8242 KGT-3597 to be 330°C, while the resistivity method measured the peak irradiation temperature of BSU-8242 KGT-3591 to be 320°C +/- 20°C. The optical dilatometry method measured the peak irradiation temperatures of the pieces of GE-Hitachi KGT-3336 to be 260°C (for the larger piece) and 220°C (for the smaller piece), while the resistivity method measured the peak irradiation temperature of GE-Hitachi KGT-3341 to be 300°C, with an accuracy range of -50°C to +20°C. Both methods of SiC temperature monitor analysis produced very similar peak irradiation temperatures for each pair of SiC passive monitors from the two experiments, BSU-8242 and GE-Hitachi. The results show dilatometry method to be a reliable and less time-intensive process for determining irradiation temperatures from passive SiC thermometry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Silicon Carbide Composite Cladding Qualification

This report examines the process to qualify a new fuel-cladding type focusing on the data requirements and types of irradiation testing necessary to meet the regulatory burden and related guidance applicable to fuel qualification of accident-tolerant fuel. The report considers the use of accelerated fuel qualification techniques and lead-test specimen programs that may shorten the timeline for qualifying fuel for use in a nuclear reactor at the desired burnup. The assessment framework particularly emphasizes the identification of key fuel manufacturing parameters, the specification of a fuel performance envelope to inform testing requirements, the use of evaluation models in the fuel qualification process, and the assessment of the experimental data used to develop and validate the empirical models and empirical safety criteria.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mapping of Defects in Large-Area Silicon Carbide Wafers via Photoluminescence and its Correlation with Synchrotron White Beam X-Ray Topography

Comparative studies of defect microstructure in 4H-SiC wafers have been carried out using photoluminescence (PL) imaging and grazing-incidence Synchrotron White Beam X-ray Topography. Images of low angle grain boundaries on the PL images correlate well with SWBXT observations, and similar correlation can be established for some micropipe images although the latter is complicated by the overall level of distortion and misorientation associated with the low angle grain boundaries and the fact that many of the micropipes are located in or close to the boundaries. This validation indicates that PL imaging may provide a rapid way of imaging such defect structures in large-scale SiC wafers.

43 PARTICLE ACCELERATORS↗

Characterization of 100 mm diameter 4H-silicon carbide crystals with extremely low basal plane dislocation density

Synchrotron White Beam X-ray Topography (SWBXT) studies are presented of basal plane dislocation (BPD) configurations and behavior in a new generation of 100mm diameter, 4H-SiC wafers with extremely low BPD densities (3-4 x 10{sup 2} cm{sup -2}). The conversion of non-screw oriented, glissile BPDs into sessile threading edge dislocations (TEDs) is observed to provide pinning points for the operation of single ended Frank-Read sources. In some regions, once converted TEDs are observed to re-convert back into BPDs in a repetitive process which provides multiple BPD pinning points.

36 MATERIALS SCIENCE↗

Nucleation of c-axis Screw Dislocations at Substrate Surface Damage During 4H-silicon Carbide Homo-epitaxy

Observations of dislocation nucleation occurring at substrate surface scratches during 4H-SiC CVD homoepitaxial growth are reported. Sub-surface residual damage associated with the scratches is observed to act as nucleation sites for basal plane dislocations (BPDs), threading edge dislocations (TEDs) and threading screw dislocations (TSDs) in the epilayer. TEDs and BPDs replicate from the surface intersections of basal plane dislocation half-loops injected into the substrate surface. A model for the nucleation mechanism of TSDs, which nucleate in opposite sign pairs, is presented which involves overgrowth of surface indentations associated with the scratch during step flow growth. Atomic steps which approach these local surface indentations can collapse creating pairs of opposite sign screw dislocations which have Burgers vector magnitude equal to the magnitude of the step disregistry created during the collapse.

36 MATERIALS SCIENCE↗