SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hand tool forms right angles in electronic component leads so they fit the spaced holes of a printed circuit board. This tool firmly holds the leads at points near the component ends to prevent damage and provide accuracy.
At .the beginning of the S-IC booster contract, it was evident that certain manufacturing techniques would have to be developed before the proposed design could be put into full production. Much of the development activity that has been accomplished was initiated because the size of booster components was greater than the capacities of available equipment. This paper describes some of the more significant methods that have evolved from this development activity, and which demonstrate how the capability to manufacture S-IC components such as bulkhead gore segments, tank skins, Y-rings, and lox tunnels, has been acquired. The fabrication methods used to transform 2219 aluminum alloy plate into the large, sculptured, and contoured parts that make up the structural surfaces of the booster include hydraulic bulge forming, age forming, and adaptations of conventional skin milling and chemical milling processes. The importance of fixturing and the machining sequence related to fabrication of the Y-ring are pointed out. The shear-spinning process that is used to produce a seamless, one-piece lox tunnel 40 feet long from a cylindrical blank only 62 inches long is described. The presentation is concluded with a synopsis of the current design changes that are being implemented to improve strength-to-weight ratios. A brief statement of possible future activity is included.
Infrared nondestructive testing for electronic component failures - conformal coating material testing to standardize infrared emissivity of electronic components
Digital computer program performs stress analysis and burst speed calculations on rotating axisymmetric turbomachinery components. The computer printout contains the displacement of each nodal point, the stress at the center of each element, the average tangential stress within the component, and the burst speed.
Warpage and creep in stainless steel valve components are decreased by a procedure in which components are machined to a semifinish and then cold soaked in a bath of cryogenic liquid. After the treatment they are returned to ambient temperature and machine finished to the final drawing dimensions.
Coating for electronic components used in space applications has bacteriostatic qualities capable of hindering bacterial reproduction, both vegetative and sporulative viable microorganisms. It exhibits high electrical resistivity, a low outgassing rate, and is capable of restraining electronic components when subjected to mechanical vibrations.
Electronic component development for space technology, discussing memory transistor, transducers, molecular electronics, power components and integration
Reliable computation in computing systems designed from unreliable components, considering two models for component malfunctions
Solar X ray detector aboard OGO 5 satellite observing two components in energetic solar X ray bursts, attributing impulsive component to bremsstrahlung
Development of computer programs for component analysis and design aids used in production of microstrip components is discussed. System includes designs for couplers, filters, circulators, transformers, power splitters, diode switches, and attenuators.
Simplified equations are presented for estimating the length and weight of major powerplant components of VTOL aircraft. The equations were developed from correlations of lift and cruise engine data. Components involved include fan, fan duct, compressor, combustor, turbine, structure, and accessories. Comparisons of actual and calculated total engine weights are included for several representative engines.
A time-independent, linear, plane and axially-symmetric stability analysis was performed on a self-gravitating, plane-parallel, isothermal layer of nonmagnetic, nonrotating gas. The gas layer was immersed in a plane-stratified field isothermal layer of stars which supply a self-consistent gravitational field. Only the gaseous component was perturbed. Expressions were derived for the perturbed gas potential and perturbed gas density that satisfied both the Poisson and hydrostatic equilibrium equations. The equation governing the size of the perturbations in the mid-plane was found to be analogous to the one-dimensional time-independent Schrodinger equation for a particle bound by a potential well, and with similar boundary conditions. The radius of the neutral state was computed numerically and compared with the Jeans' and Ledoux radius. The inclusion of a rigid stellar component increased the Ledoux radius, though only slightly. Isodensity contours of the neutrual or marginally unstable state were constructed.
The distribution of gas satisfying hydrostatic and Poisson conditions with distance above the galactic plane is derived and compared with Schmidt's observations of the gas density, rho sub g (z). Equipartition magnetic and cosmic ray (Pc-r) components are assumed. The gas density is calculated for two limiting cases: (1) the total mass density at the galactic plane is equal to the sum of the observed gas and star densities in the solar neighborhood, and (2) Oort's data on the z component of the galactic gravitational acceleration are used. The rms z turbulent gas velocity dispersion is found. An expression is derived for the half-thickness of the equilibrium disk of galactic gas. Using the Innanen galactic mass model, the half-thickness is computed as a function of distance from the galactic center over the range 4kpc or = R or = 14kpc and compared to the observations of McGee and Milton. The observed increase in half-thickness at distances beyond the solar distance is reproduced theoretically. A galactic mass model is derived, using the observed layer half-width and constant value for Q.
Flammability testing of components in the design of Apollo spacecraft is discussed. The purpose of component flammability testing was to determine the flammability characteristics of a variety of different sizes, shapes, and configurations of nonmetallic materials of similar or different types that make up a functional assembly, subsystem, or system in a spacecraft. The test criteria and requirements for the nonmetallic materials are presented.
A study was conducted of techniques having the capability of determining the performance and reliability of components for spacecraft liquid propulsion applications for long term missions. The study utilized two major approaches; improvement in the existing technology, and the evolution of new technology. The criteria established and methods evolved are applicable to valve components. Primary emphasis was placed on the propellants oxygen difluoride and diborane combination. The investigation included analysis, fabrication, and tests of experimental equipment to provide data and performance criteria.
A self-consistent, two-dimensional, two-component diffusion model is presented to describe the diurnal component of thermosphere dynamics. In the regions where oxygen and helium are the minor constituents, diffusion is shown to increase the amplitudes of these constituents and to advance the times of their diurnal maxima by several hours with respect to the gas temperature and the major species. Both effects are in basic agreement with satellite observations. The diffusion process is relatively insignificant for temperature, total mass density, and wind fields. The magnitude of the temperature-density phase delay is discussed with respect to its dependence on the electron density distribution.
A container has been developed for handling, testing, burning-in, and storing discrete microelectronic components without removal from the protective package. The package was designed to accommodate the leadless inverted device and other carrier-mounted active devices and chip-type discrete resistors and capacitors. Before the indicated development, components were handled and tested in various ways, some of which resulted in damage or contamination. The basic design of the container utilizes precision machined printed circuit boards and chemically milled (photoetched) contact springs. Included in this design for protection is an O-ring-sealed cover. Methods of fabrication and limitations of the current hardware are presented. Current applications of and possible extensions to the technology are discussed.
The oxidation by ZnO holes of vehicle components in thermal control coatings has been examined to develop experimental methods to study such reactions and to identify what components to avoid because of their instability when in the presence of u.v.-produced holes. Two methods were used that show consistent results. An electrochemical technique with a single crystal ZnO anode was used for quantitative comparisons, and electron spin resonance was used to study more practical powder/vehicle systems. Alcohols and dioxane were shown to be readily oxidized by ZnO holes, whereas acetonitrile, neopentane, and ethyl acetate were oxidation resistant. Some resistance to the photooxidation was provided by recombination centers.