Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Injection of a Self-Consistent Beam at the Spallation Neutron Source

We plan to demonstrate the injection of a self-consistent beam into the Spallation Neutron Source (SNS). Self-consistent beams are defined to be ellipsoidal distributions with uniform density and to retain these properties under all linear transformations. Self-consistent distributions may generate very little halo if realized in practice. Some may also be manipulated to generate flat beams. Self-consistent distributions involve very special relationships between the phase space coordinates, making them difficult to realize experimentally. One self-consistent distribution, the 2D rotating distribution, can be painted into the SNS ring, with slight modification of the lattice. However, it is unknown how robust self-consistent distributions will be under real world transport in the presence of nonlinearities and other collective effects. This paper studies these issues and the mitigation of unwanted effects by applying realistic detailed computational models to the simulation of the injection of rotating beams into SNS. The result is a feasible prescription for the injection of a rotating self-consistent distribution into the SNS ring.

Holmes, Jeffrey↗

Temperature Dependence of the Structural Parameters in the Transformation of Aragonite to Calcite, as Determined from In Situ Synchrotron Powder X-ray-Diffratction Data

The temperature dependency of the crystal structure and the polymorphic transition of CaCO{sub 3} from aragonite to calcite were studied using Rietveld structure refinement and high-temperature in situ synchrotron powder X-ray-diffraction data at ambient pressure, P. The orthorhombic metastable aragonite at room P, space group Pmcn, transforms to trigonal calcite, space group R{bar 3}c, at about T{sub c} = 468 C. This transformation occurs rapidly; it starts at about 420 C and is completed by 500 C, an 80 C interval that took about 10 minutes using a heating rate of 8 C/min. Structurally, from aragonite to calcite, the distribution of the Ca atom changes from approximately hexagonal to cubic close-packing. A 5.76% discontinuous increase in volume accompanies the reconstructive first-order transition. Besides the change in coordination of the Ca atom from nine to six from aragonite to calcite, the CO{sub 3} groups change by a 30{sup o} rotation across the transition.

58 GEOSCIENCES↗

Transonic potential flow and coordinate generation for bodies in a wind tunnel

An accurate method has been developed for computation of transonic potential flow about a 2-D lifting airfoil or an axisymmetric body in a wind tunnel. The computational mesh is nearly orthogonal everywhere and is generated by a sequence of Schwarz-Christoffel transformations and shearings to obtain an '0' grid near the body. A conservative finite-volume scheme for the full-potential equation and exact boundary conditions is used together with 'retarded' density to solve efficiently transonic flow with embedded shocks and large regions of supersonic flow. Supersonic free-stream flows are also solved with captured bow shocks and embedded subsonic regions.

Doria, M. L.↗

2‐Aminobenzenethiol‐Functionalized Silver‐Decorated Nanoporous Silicon Photoelectrodes for Selective CO 2 Reduction

Abstract A molecularly thin layer of 2‐aminobenzenethiol (2‐ABT) was adsorbed onto nanoporous p‐type silicon (b‐Si) photocathodes decorated with Ag nanoparticles (Ag NPs). The addition of 2‐ABT alters the balance of the CO 2 reduction and hydrogen evolution reactions, resulting in more selective and efficient reduction of CO 2 to CO. The 2‐ABT adsorbate layer was characterized by Fourier transform infrared (FTIR) spectroscopy and modeled by density functional theory calculations. Ex situ X‐ray photoelectron spectroscopy (XPS) of the 2‐ABT modified electrodes suggests that surface Ag atoms are in the +1 oxidation state and coordinated to 2‐ABT via Ag−S bonds. Under visible light illumination, the onset potential for CO 2 reduction was −50 mV vs. RHE, an anodic shift of about 150 mV relative to a sample without 2‐ABT. The adsorption of 2‐ABT lowers the overpotentials for both CO 2 reduction and hydrogen evolution. A comparison of electrodes functionalized with different aromatic thiols and amines suggests that the primary role of the thiol group in 2‐ABT is to anchor the NH 2 group near the Ag surface, where it serves to bind CO 2 and also to assist in proton transfer.

Kan, Miao↗

Ligand-Functionalized Polymer Membranes for Selective Ion Separations

Selective ion separations are central to technologies spanning water purification, resource recovery, and clean energy. Conventional polymer membranes, which rely on steric hindrance or Donnan exclusion, struggle to discriminate between chemically similar ions in high-ionic-strength environments. Ligand-functionalized membranes offer a transformative strategy by embedding molecular recognition directly into polymer matrices, enabling selective complexation and transport. Here, this Viewpoint highlights the structure–function relationships underlying ligand-mediated ion separation, emphasizing the interplay of dehydration penalties, ligand coordination, and nanoscale confinement. We discuss design principles, denticity, donor identity, rigidity, and spatial organization, alongside the permeability–selectivity trade-off, multicomponent effects, and stability challenges. Finally, we outline emerging strategies, from bioinspired ligands to computationally guided design, that chart a path toward next-generation membranes for precise and energy-efficient ion separations.

ions↗

Fault Contribution of Grid-Following and Grid-Forming Inverters Considering Generic Inverter Controls and Ride-through Requirements

Gradual transformation of the synchronous generator (SG)-dominated power systems to inverter-based resource (IBR)-dominated power systems is bringing new challenges regarding power system protection. Increasing IBR’s penetration will reduce the reliability of protection coordination, originally developed for SG-dominated power systems, potentially leading to less accurate calculation or even mis-operation. Thus, new protection schemes compatible with IBR-dominated power systems should be established. Prior to establishing the protection schemes, research on the fault contribution of generic IBR models should be conducted considering interconnection requirements. This paper conducts fault current contribution analysis of generic grid-following (GFL) and grid-forming (GFM) inverters considering interconnection requirements using an electromagnetic transient (EMT) simulation tool. To do this, EMT-based generic GFL models have been developed with the ride-through requirements from IEEE-1547 standards. In addition, the major functions of the generic models are explained. Then, the fault current analysis was conducted using GFL and GFM inverters in a single-inverter-infinite-bus system and a modified IEEE 34-node system considering different grid, fault, inverter control parameters.

Kim, Jinho [BATTELLE (PACIFIC NW LAB)]↗

ExaWorks: Workflows for Exascale

Exascale computers will offer transformative capabilities to combine data-driven and learning-based approaches with traditional simulation applications to accelerate scientific discovery and insight. These software combinations and integrations, however, are difficult to achieve due to challenges of coordination and deployment of heterogeneous software components on diverse and massive platforms. We present the ExaWorks project, which can address many of these challenges: ExaWorks is leading a co-design process to create a workflow Software Development Toolkit (SDK) consisting of a wide range of workflow management tools that can be composed and interoperate through common interfaces. We describe the initial set of tools and interfaces supported by the SDK, efforts to make them easier to apply to complex science challenges, and examples of their application to exemplar cases. Furthermore, we discuss how our project is working with the workflows community, large computing facilities as well as HPC platform vendors to sustainably address the requirements of workflows at the exascale.

97 MATHEMATICS AND COMPUTING↗

A Drosophila Model for EGFR-Ras and PI3K-Dependent Human Glioma

Gliomas, the most common malignant tumors of the nervous system, frequently harbor mutations that activate the epidermal growth factor receptor (EGFR) and phosphatidylinositol-3 kinase (PI3K) signaling pathways. To investigate the genetic basis of this disease, we developed a glioma model in Drosophila. We found that constitutive coactivation of EGFRRas and PI3K pathways in Drosophila glia and glial precursors gives rise to neoplastic, invasive glial cells that create transplantable tumor-like growths, mimicking human glioma. Our model represents a robust organotypic and cell-type specific Drosophila cancer model in which malignant cells are created by mutations in signature genes and pathways thought to be driving forces in a homologous human cancer. Genetic analyses demonstrated that EGFR and PI3K initiate malignant neoplastic transformation via a combinatorial genetic network composed primarily of other pathways commonly mutated or activated in human glioma, including the Tor, Myc, G1 Cyclins-Cdks, and Rb-E2F pathways. This network acts synergistically to coordinately stimulate cell cycle entry and progression, protein translation, and inappropriate cellular growth and migration. In particular, we found that the fly orthologs of CyclinE, Cdc25, and Myc are key rate-limiting genes required for glial neoplasia. Moreover, orthologs of Sin1, Rictor, and Cdk4 are genes required only for abnormal neoplastic glial proliferation but not for glial development. These and other genes within this network may represent important therapeutic targets in human glioma.

59 BASIC BIOLOGICAL SCIENCES↗

Viscous compressible flow direct and inverse computation and illustrations

An algorithm for laminar and turbulent viscous compressible two dimensional flows is presented. For the application of precise boundary conditions over an arbitrary body surface, a body-fitted coordinate system is used in the physical plane. A thin-layer approximation of tne Navier-Stokes equations is introduced to keep the viscous terms relatively simple. The flow field computation is performed in the transformed plane. A factorized, implicit scheme is used to facilitate the computation. Sample calculations, for Couette flow, developing pipe flow, an isolated airflow, two dimensional compressor cascade flow, and segmental compressor blade design are presented. To a certain extent, the effective use of the direct solver depends on the user's skill in setting up the gridwork, the time step size and the choice of the artificial viscosity. The design feature of the algorithm, an iterative scheme to correct geometry for a specified surface pressure distribution, works well for subsonic flows. A more elaborate correction scheme is required in treating transonic flows where local shock waves may be involved.

Yang, T. T.↗

Analytic evaluation of two-center molecular integrals

By using the Fourier-transform technique, the explicit expressions for the one-electron - two-center overlap integrals of Slater-type atomic orbitals up to 3d are derived. The final expressions are analytic, simple, and independent of local coordinates. Furthermore, they do not contain the nonclosed-form of exponential integrals which were presented in expressions given in earlier work. It is shown that the two-electron - two-center Coulomb integrals, as well as the hybrid integrals, can simply be expressed in terms of these integrals. The numerical instability arising from the situation in which the exponents of the two orbitals are almost equal is discussed, and a solution for this problem based on a Taylor-series expansion of the integral is suggested.

Tai, H.↗

In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part II: Nonlinear Theory and Extended Aerodynamics

Conical shell theory and a supersonic potential flow aerodynamic theory are used to study the nonlinear pressure buckling and aeroelastic limit cycle behavior of the thermal protection system for NASA's Hypersonic Inflatable Aerodynamic Decelerator. The structural model of the thermal protection system consists of an orthotropic conical shell of the Donnell type, resting on several circumferential elastic supports. Classical Piston Theory is used initially for the aerodynamic pressure, but was found to be insufficient at low supersonic Mach numbers. Transform methods are applied to the convected wave equation for potential flow, and a time-dependent aerodynamic pressure correction factor is obtained. The Lagrangian of the shell system is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the governing differential-algebraic equations of motion. Aeroelastic limit cycle oscillations and buckling deformations are calculated in the time domain using a Runge-Kutta method in MATLAB. Three conical shell geometries were considered in the present analysis: a 3-meter diameter 70 deg. cone, a 3.7-meter 70 deg. cone, and a 6-meter diameter 70 deg. cone. The 6-meter configuration was loaded statically and the results were compared with an experimental load test of a 6-meter HIAD. Though agreement between theoretical and experimental strains was poor, the circumferential wrinkling phenomena observed during the experiments was captured by the theory and axial deformations were qualitatively similar in shape. With Piston Theory aerodynamics, the nonlinear flutter dynamic pressures of the 3-meter configuration were in agreement with the values calculated using linear theory, and the limit cycle amplitudes were generally on the order of the shell thickness. The effect of axial tension was studied for this configuration, and increasing tension was found to decrease the limit cycle amplitudes when the circumferential elastic supports were neglected, but resulted in more complex behavior when the supports were included. The nominal flutter dynamic pressure of the 3.7-meter configuration was significantly lower than that of the 3-meter, and it was found that two sets of natural modes coalesce to flutter modes near the same dynamic pressure. This resulted in a significant drop in the limit cycle frequencies at higher dynamic pressures, where the flutter mode with the lower frequency becomes more critical. Pre-buckling pressure loads and the aerodynamic pressure correction factor were studied for all geometries, and these effects resulted in significantly lower flutter boundaries compared with Piston Theory alone. The maximum dynamic pressure predicted by aerodynamic simulations of a proposed 3.7-meter HIAD vehicle was still lower than any of the calculated flutter dynamic pressures, suggesting that aeroelastic effects for this vehicle are of little concern.

Goldman, Benjamin D.↗

Composition Reanalyses at NASA’s Global Modeling and Assimilation Office

Scientific Assessments of Ozone Depletion 2018 and 2022 report the recovery of Antarctic ozone, consistent with diminishing concentrations of halogens in the stratosphere. Both the size and the depth of the springtime ozone holes exhibit downward trends, particularly in September. Superimposed on the recovery trend are significant year-to-year fluctuations arising from dynamical variability potentially influenced by climate forcing and volcanic eruptions. Since 2018 the Antarctic stratosphere has experienced a wild parade of austral spring seasons with a sudden stratospheric warming and exceptionally high ozone in 2019 followed by large and long-lasting ozone holes in the following years, prompting questions about the speed and detectability of Antarctic ozone recovery and its potential connections to human-induced climate change. From the Australian New Years’ wildfires of 2020 to volcanic aerosols to the unprecedented injection of water vapor by the Hunga volcanic eruption, recent scientific literature on the subject investigates many factors that may or may not have contributed to this remarkable interannual variability. This presentation summarizes dynamical influences on springtime Antarctic stratospheric ozone in recent years and discusses these results in the context of long-term trends. In particular, this work seeks to isolate dynamical and chemical contributions to the Antarctic springs since 2019 using a consistent methodological framework. Our analysis uses constituent and meteorological fields from the MERRA-2 Stratospheric Composition Reanalysis of Aura MLS (M2-SCREAM) in combination with data from the Atmospheric Chemistry Experiment – Fourier Transform Spectrometer and from ozone sondes. Using the high spatial and temporal resolution of M2-SCREAM, we analyze the daily evolution of southern polar ozone, HCl, N2O, and water vapor in dynamical flow-following coordinates relative to the location, size, and shape of the polar vortex. For vertically integrated stratospheric ozone we emphasize the importance of the wave-influenced geometry of the polar vortex and its vertical alignment. The ultimate purpose of this project is to contribute to the quantification of the speed of the Antarctic ozone recovery and associated uncertainties.

Krzysztof Wargan↗

Structural stability of the Li-ion conductor Li7La3Zr2O12 investigated by high-pressure in-situ X-ray diffraction and Raman spectroscopy

Highlights: • Lithium ion conductor of Garnet-related-type structure Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. • Conversion(M.E.) • High-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} is investigated up to 70 GPa. • High pressure in-situ X-ray diffraction measurements and Raman spectroscopy. • Tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} transforms to high-pressure cubic one under high pressure. - Abstract: The high-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) with a garnet-related structure has been investigated for the first time by high pressure in situ X-ray diffraction measurements and Raman spectroscopy using a diamond anvil cell. It was found that the tetragonal LLZO transforms to the high-pressure cubic phase (HP-c-LLZO) at 71.8 GPa in a N{sub 2} medium and at 25.8 GPa in the absence of pressure mediums. Uniaxial compression in the absence of pressure mediums induced the phase transition at much lower pressures than in the hydrostatic case when N{sub 2} was used as the pressure medium. High pressure in situ Raman spectroscopy suggested that the Li coordination in HP-c-LLZO was different from that reported in cubic LLZO, which had been stabilized by doping Al at ambient pressure and room temperature.

36 MATERIALS SCIENCE↗

The historical development of mesooptics

This paper reports in detail the history of scientific and methodological research carried out at the Laboratory of Nuclear Problems, JINR, in 1982–1996, with the goal of developing the mesooptical Fourier transform microscope for straight-line tracks of charged particles with a small angle of dip. The international priority and reliability of the results obtained indicate that the mesooptics group at JINR LNP laid the necessary and sufficient theoretical and experimental foundation for further scientific research on mesooptics. It is pointed out that even before the advent of mesooptics the search for fundamentally new techniques for the processing of three-dimensional track information without the traditional algorithm of partitioning the particle track into components was carried at JINR LNP. Investigations based on the use of the integral pattern of the initial image are described in detail. It is shown that only mesooptics has made it possible to completely avoid depth scanning without any loss of information on the z coordinate and the particle track dip angle θ{sub z}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Molecular investigation on the binding of Cd(II) by the binary mixtures of montmorillonite with two bacterial species

Bacteria and phyllosilicate commonly coexist in the natural environment, producing various bacteria–clay complexes that are capable of immobilizing heavy metals, such as cadmium, via adsorption. However, the molecular binding mechanisms of heavy metals on these complex aggregates still remain poorly understood. This study investigated Cd adsorption on Gram-positive B. subtilis, Gram-negative P. putida and their binary mixtures with montmorillonite (Mont) using the Cd K-edge x-ray absorption spectroscopy (XAS) and isothermal titration calorimetry (ITC). We observed a lower adsorptive capacity for P. putida than B. subtilis, whereas P. putida–Mont and B. subtilis–Mont mixtures showed nearly identical Cd adsorption behaviors. EXAFS fits and ITC measurements demonstrated more phosphoryl binding of Cd in P. putida. The decreased coordination of C atoms around Cd and the reduced adsorption enthalpies and entropies for the binary mixtures compared to that for individual bacteria suggested that the bidentate Cd-carboxyl complexes in pure bacteria systems were probably transformed into monodentate complexes that acted as ionic bridging structure between bacteria and motmorillonite. This study clarified the binding mechanism of Cd at the bacteria–phyllosilicate interfaces from a molecular and thermodynamic view, which has an environmental significance for predicting the chemical behavior of trace elements in complex mineral–organic systems.

54 ENVIRONMENTAL SCIENCES↗

Spectroscopic and Electronic Structure Study of ETHE1: Elucidating the Factors Influencing Sulfur Oxidation and Oxygenation in Mononuclear Nonheme Iron Enzymes

ETHE1 is a member of a growing subclass of nonheme Fe enzymes that catalyzes transformations of sulfur-containing substrates without a cofactor. ETHE1 dioxygenates glutathione persulfide (GSSH) to glutathione (GSH) and sulfite in a reaction which is similar to that of cysteine dioxygenase (CDO), but with monodentate (vs bidentate) substrate coordination and a 2-His/1-Asp (vs 3-His) ligand set. In this study, we demonstrate that GSS– binds directly to the iron active site, causing coordination unsaturation to prime the site for O 2 activation. Nitrosyl complexes without and with GSSH were generated and spectroscopically characterized as unreactive analogues for the invoked ferric superoxide intermediate. New spectral features from persulfide binding to the Fe III include the appearance of a low-energy Fe III ligand field transition, an energy shift of a NO– to Fe III CT transition, and two new GSS– to Fe III CT transitions. Time-dependent density functional theory calculations were used to simulate the experimental spectra to determine the persulfide orientation. Correlation of these spectral features with those of monodentate cysteine binding in isopenicillin N synthase (IPNS) shows that the persulfide is a poorer donor but still results in an equivalent frontier molecular orbital for reactivity. The ETHE1 persulfide dioxygenation reaction coordinate was calculated, and while the initial steps are similar to the reaction coordinate of CDO, an additional hydrolysis step is required in ETHE1 to break the S–S bond. Unlike ETHE1 and CDO, which both oxygenate sulfur, IPNS oxidizes sulfur through an initial H atom abstraction. Thus, factors that determine oxygenase vs oxidase reactivity were evaluated. In general, sulfur oxygenation is thermodynamically favored and has a lower barrier for reactivity. Furthermore, in IPNS, second-sphere residues in the active site pocket constrain the substrate, raising the barrier for sulfur oxygenation relative to oxidation via H atom abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗