Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Influence of structural defects on charge density waves in 1T-TaS2

Abstract The influence of intrinsic defects of 1T-TaS 2 on charge density waves (CDWs) is studied using scanning tunneling microscopy and spectroscopy (STM, STS), angle-resolved photoelectron spectroscopy (ARPES), and density functional theory (DFT). We identify several types of structural defects and find that most have a local character limited to a single CDW site, with a single exception which effectively behaves as a dopant, leading to band-bending and affecting multiple neighboring sites. While only one type of defect can be observed by STM topographic imaging, all defects are easily resolved in STS mapping. Our results indicate modulation of the Mott band gap commensurate with the CDW and breaking of the three-fold symmetry of electronic states. DFT calculations (with included Coulomb interactions) are used to investigate the electronic structure, focusing on both sulfur vacancy and oxygen-sulfur substitution. The sulfur vacancy system, characterized with a metallic behavior, is identified as the origin of one of the experimentally observed defects. Additionally, the effect of oxidation of 1T-TaS 2 depends on the substitution site, leading to the heterogeneity of electronic properties.

Chemistry↗

Design of Pd-Pb Catalysts for Glycerol and Ethylene Glycol Electrooxidation in Alkaline Medium

Unsupported Pd x Pb 1-x electrocatalysts were synthesized by a modified sacrificial support method (SSM) and thoroughly characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Their electrochemical activity was evaluated for the electrooxidation reactions of ethylene glycol (EGOR) and glycerol (GOR) in alkaline electrolytes, reaching an onset of - 510 mV vs. the normal hydrogen electrode (NHE) for the EGOR and the GOR vs. - 430 mV vs. NHE for the EGOR and the GOR on the Pd-black. Additional mechanistic insights were provided by DFT calculations, showing that the presence of Pb resulted in a stronger binding of the OH ads , therefore explaining the enhanced kinetics for the electrooxidation of C 2 (ethylene glycol) and C 3 (glycerol) alcohol in this environment.

Chemistry↗

Laser Desorption Ionization Quadrupole Ion Trap Time-of-Flight Mass Spectrometry of Au{sub m}Fe{sub n}{sup +/–} Clusters Generated from Gold-Iron Nanoparticles and their Giant Nanoflowers. Electrochemical and/or Plasma Assisted Synthesis

Gold nanoparticles (NP) with average diameter ~100 nm synthesized from tetrachloroauric acid solution using stainless steel as a reducing agent were found to contain iron. Applying simultaneously high frequency (HF) plasma discharge in solution during the electrochemical reduction, giant gold-iron nanoflowers with average size ~1000–5000 nm were formed. Scanning electron microscopy (SEM) shows the morphology of the nanopowders produced as polygonal yet nearly spherical, whereas iron content in both products determined by energy dispersive X-ray analysis (EDX) was found to be at ~2.5 at. %. Laser desorption ionization (LDI) of both nanomaterials and mass spectrometric analysis show the formation of Au{sub m}Fe{sub n}{sup +/–} (m = 1–35; n = 1–3) clusters. Structure of few selected clusters in neutral or monocharged forms were computed by density functional theory (DFT) calculations and it was found that typical distances of an iron nucleus from adjacent gold nuclei lie in the interval 2.5 to 2.7 Å. Synthetized Au-Fe nanoparticles were found stable for at least 2 mo at room temperature (even in aqueous solution) without any stabilizing agent. Produced Au-Fe nanoparticles in combination with standard MALDI matrices enhance ionization of peptides and might find use in nanomedicine. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation and Characterization of Zr{sup 4+} Stabilized by Neutral Tridentate Ligands in the Gas Phase

Ligated tetrapositive metal ions are rare gas-phase species which tend to form complexes with lower charges due to the high 4th ionization energies of metals. We report the observation of tetrapositive Zr(TMPDA){sub 3}{sup 4+} and Zr(TMOGA){sub 3}{sup 4+} complexes in the gas phase by electrospray ionization of Zr(ClO{sub 4}){sub 4}/TMPDA and Zr(ClO{sub 4}){sub 4}/TMOGA mixtures. The Zr{sup 4+} center in both complexes is coordinated by nine atoms from three neutral diamide ligands forming nine-coordinate twisted tricapped trigonal prismatic geometry on the basis of DFT calculations. Collision-induced dissociation of both complexes resulted in the loss of protonated ligands to form tripositive Zr(TMPDA)(TMPDA-H){sup 3+} and Zr(TMOGA)(TMOGA-H){sup 3+} products which retain the IV oxidation state of zirconium at the cost of charge reduction from 4+ to 3+ of the whole complexes. The very high 4th ionization energy of zirconium (34.34 eV) makes tetrapositive zirconium complex the most challenging tetracation to be stabilized against charge reduction in the gas phase to date. .

36 MATERIALS SCIENCE↗

Effect of Basicity and Structure on the Hydration of Protonated Molecules, Proton-Bound Dimer and Cluster Formation: An Ion Mobility-Time of Flight Mass Spectrometry and Theoretical Study

Protonation, hydration, and cluster formation of ammonia, formaldehyde, formic acid, acetone, butanone, 2-ocatanone, 2-nonanone, acetophenone, ethanol, pyridine, and its derivatives were studied by IMS-TOFMS technique equipped with a corona discharge ion source. It was found that tendency of the protonated molecules, MH{sup +}, to participate in hydration or cluster formation depends on the basicity of M. The molecules with higher basicity were hydrated less than those with lower basicity. The mass spectra of the low basic molecules such as formaldehyde exhibited larger clusters of M{sub n}H{sup +}(H{sub 2}O){sub n}, while for compounds with high basicity such as pyridine, only MH{sup +} and MH{sup +}M peaks were observed. The results of DFT calculations show that enthalpies of hydrations and cluster formation decrease as basicities of the molecules increases. Using comparison of mass spectra of formic acid, formaldehyde, and ethanol, effect of structure on the cluster formation was also investigated. Formation of symmetric (MH{sup +}M) and asymmetric proton-bound dimers (MH{sup +}N) was studied by ion mobility and mass spectrometry techniques. Both theoretical and experimental results show that asymmetric dimers are formed more easily between molecules (M and N) with comparable basicity. As the basicity difference between M and N increases, the enthalpy of MH{sup +}N formation decreases. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Co-adsorption of O{sub 2} and C{sub 2}H{sub 4} on a Free Gold Dimer Probed via Infrared Photodissociation Spectroscopy

Infrared multiple photon dissociation (IR-MPD) spectroscopy in conjunction with density functional theory (DFT) calculations has been employed to study the activation of molecular oxygen and ethylene co-adsorbed on a free gold dimer cation Au{sub 2}{sup +}. Both studied complexes, Au{sub 2}O{sub 2}(C{sub 2}H{sub 4}){sup +} and Au{sub 2}O{sub 2}(C{sub 2}H{sub 4}){sub 2}{sup +}, show distinct features of both intact O{sub 2} and ethylene co-adsorbed on the cluster. However, the ethylene C=C double bond is activated, increasing in length by up to 0.07 Å compared with the free molecule, and the red shift of the O–O vibration frequency increases with the number of adsorbed ethylene molecules, indicating a small but increasing activation of the O–O bond. The small O{sub 2} activation and the rather weak interaction between O{sub 2} and C{sub 2}H{sub 4} are also reflected in the calculated electronic structure of the co-adsorption complexes which shows only a small occupation of the empty anti-bonding O{sub 2} 2π{sup *}{sub 2p} orbital as well as the localization of most of the Kohn–Sham orbitals on O{sub 2} and C{sub 2}H{sub 4}, respectively, with only limited mixing between O{sub 2} and C{sub 2}H{sub 4} orbitals. The results are compared with theoretical studies on neutral Au{sub x}O{sub 2}(C{sub 2}H{sub 4}) (x = 3, 5, 7, 9) complexes. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Modeling radiation induced segregation in Iron-Chromium alloys

Radiation induced segregation in ferritic Fe-Cr alloys is studied by Atomistic Kinetic Monte Carlo simulations that include di usion of chemical species by vacancy and interstitial migration, recombination, and elimination at sinks. The parameters of the di usion model are tted to DFT calculations. Transport coe cients that control the coupling between di usion of defects and chemical species are measured in dilute and concentrated alloys. Radiation induced segregation near grain boundaries is directly simulated with this model. We nd that the di usion of vacancies toward sinks leads to a Cr depletion. Meanwhile, the di usion of self-interstitials causes an enrichment of Cr in the vicinity of sinks. For concentrations lower than 15%Cr, we predict that sinks will be enriched with Cr for temperatures lower than a threshold. When the temperature is above this threshold value, the sinks will be depleted in Cr. These results are compared to previous experimental studies and models. Cases of radiation induced precipitation and radiation accelerated precipitation are considered.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Interaction between Al and atomic layer deposited (ALD) ZrN under high-energy heavy ion irradiation

Uranium-molybdenum (U-Mo) particles dispersed in an aluminum matrix is the most promising candidate fuel to convert high-power research and test reactors in Europe from using high-enriched to using low-enriched fuel. However, chemical interaction between the U-Mo and the Al matrix leads to undesirable fuel behavior. Zirconium nitride (ZrN) is used as a diffusion barrier between the U-Mo fuel particles and the Al matrix. To understand the potential microstructural evolution of ZrN during irradiation, a high-energy heavy ion (84 MeV Xe) irradiation experiment was performed on atomic layer deposited (ALD) nanocrystalline ZrN deposited on an Al plate. A fluence of 1.86 x 10 17 ions/cm 2 , or 90.3 dpa was reached during this experiment. Both analytic transmission electron microscopy (TEM) and synchrotron microbeam X-ray diffraction (ARD) techniques were utilized to investigate the kinetics of radiation-induced grain growth of ZrN at various radiation doses based on the Williamson-Hall analyses. The grain growth kinetics can be described by a power law expression, D n - D$n\atop{0}$ = K phi, with n = 5.1. The Al-ZrN interaction products (Al 3 Zr and AIN) created by radiation-induced ballistic mixing/radiation-enhanced diffusion and their corresponding formation mechanism were determined from electron diffraction and elemental composition analysis. These experimental results were confirmed by first principle thermodynamic density functional theory (DFT) calculations. The results from this ion irradiation study were also compared to in-pile irradiation data from physical vapor deposited (PVD) ZrN samples for a comprehensive evaluation of the interaction between Al and ZrN and its influence on diffusion barrier performance.

36 MATERIALS SCIENCE↗

Helium irradiated cavity formation and defect energetics in Ni-based binary single-phase concentrated solid solution alloys

In this study, binary single-phase concentrated solid solution alloys (SPCSAs), including Ni 80 Co 20 , Ni 80 Fe 20 , Ni 80 Cr 20 , Ni 80 Pd 20 , and Ni 80 Mn 20 (in atomic percentage), were irradiated with 200 keV He + ions at 500 °C. He cavity size and density distribution were systematically investigated using transmission electron microscope. Here we show that alloying elements have a clear impact on He cavity formation. Cavity size is the smallest in Ni 80 Mn 20 but the largest in Ni 80 Co 20 . Alloying elements could also substantially affect cavity density profile. In-depth examination of cavities at peak damage region (~500 nm) and at low damage region (~300 nm) demonstrates that cavity size is depth (damage) dependent. Competition between consumption and production of vacancies and He atoms could lead to varied cavity size. Density functional theory (DFT) calculations were performed to obtain the formation and migration energies of interstitials and vacancies. Combined experimental and simulation results show that smaller energy gap between interstitial and vacancy migration energies may lead to smaller cavity size and narrower size distribution observed in Ni 80 Mn 20 , comparing with Ni 80 Co 20 . Finally, the results of this study call attention to alloying effects of specific element on cavity formation and defect energetics in SPCSAs, and could provide fundamental understanding to predict radiation effects in more complexed SPCSAs, such as high entropy alloys.

36 MATERIALS SCIENCE↗

Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys

The localized corrosion of Li-containing nm hardening precipitates in the 3rd generation of Al-Cu-Li alloys was investigated based on a quasi in situ approach by sequentially exposing the material to NaCl solution and characterizing the structural, chemical, and electrochemical evolution at atomic scale using electron microscopy, spectroscopy, 3D tomography, electrochemical measurements, and DFT calculations. Localized corrosion of Al 7.5 Cu 4 Li (TB phase) initiated along {001} family of planes through the dealloying of Al and Li due to a low surface work function. Cu was enriched along the Cu (110) // T B (011) // Al (100) orientations on and around corroded T B precipitates. No strong galvanic interactions were observed at the T B and Al matrix interface due to the formation of a Li-C-O rich passivation layer during electrolyte exposure. Similarities and differences between T B and other common Al-Cu-Li precipitates (Al 2 CuLi, Al 6 CuLi 3 , and Al 3 Li) with respect to corrosion are discussed. Overall, the reported corrosion mechanism can assist in the assessment of the localized corrosion susceptibility of precipitation-hardened Al alloys and assist in the design of new alloys.

36 MATERIALS SCIENCE↗

Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics

In this work, the thermodynamic properties of α-Al and other phases (GP zones, θ'', θ' and θ) in the Al-rich part of the Al-Cu system have been obtained by means of the cluster expansion formalism in combination with statistical mechanics. This information was used to build the Al-rich part of the Al-Cu phase-diagram taking into account vibrational entropic contributions for θ', as those of the other phases were negligible. The simulation predictions of the phase boundaries between α-Al and either θ'', θ' or θ phases as a function of temperature are in good agreement with experimental data and extend the phase boundaries to a wider temperature range. The DFT calculations reveal the presence of a number of metastable Guinier-Preston-zone type configurations that may coexist with α-Al and θ'' at low temperatures. They also demonstrate that θ' is the stable phase below 550K but it is replaced by θ above this temperature due to the vibrational entropic contribution to the Gibbs energy of θ'. This work shows how the combination of cluster expansion and statistical mechanics can be used to expand our knowledge of the phase diagram of metallic alloys and to provide Gibbs free energies of different phases that can be used as input in mesoscale simulations of precipitation.

36 MATERIALS SCIENCE↗

Enhanced liquid metal wetting on oxide surfaces via patterned particles

Liquid metals typically do not intrinsically wet oxide surfaces due to chemical dissimilarity, preventing the formation of well-bonded interfaces in many applications. This paper investigates how the wetting and spreading of liquid silver (Ag) droplets on oxide surfaces can be enhanced via patterned nickel (Ni) particles using multiscale modeling. First, a force field (FF) for an Ag/yttria-stabilized-zirconia system was developed by fitting the interfacial binding energy to density-functional theory (DFT) calculations. Then, molecular dynamics (MD) simulations using these FF parameters revealed that the good wetting of Ag on Ni caused Ag droplets to be attracted to the Ni particles, promoting spreading. Thus, the optimal hexagonal Ni pattern was shown to enhance the wetting area by 224% compared to a bare oxide surface. Second, an analytical model predicting the maximum possible enhancement in wetting area as a function of the intrinsic wetting angle, size of the Ag droplet, and size of the Ni particles was derived and validated with MD simulations, to generalize this method to other substrates. Here, both the analytical model and MD results suggested that the ability of Ni patterns to enhance the Ag wetting area becomes more significant as the wettability of substrate becomes worse.

36 MATERIALS SCIENCE↗

Towards stacking fault energy engineering in FCC high entropy alloys

Stacking Fault Energy (SFE) is an intrinsic alloy property that governs much of the plastic deformation mechanisms observed in fcc alloys. While SFE has been recognized for many years as a key intrinsic mechanical property, its inference via experimental observations or prediction using, for example, computationally intensive first-principles methods is challenging. This difficulty precludes the explicit use of SFE as an alloy design parameter. In this work, we combine DFT calculations (with necessary configurational averaging), machine-learning (ML) and physics-based models to predict the SFE in the fcc CoCrFeMnNiV-Al high-entropy alloy space. The best-performing ML model is capable of accurately predicting the SFE of arbitrary compositions within this 7-element system. Finally, this efficient model along with a recently developed model to estimate intrinsic strength of fcc HEAs is used to explore the strength–SFE Pareto front, predicting new-candidate alloys with particularly interesting mechanical behavior.

36 MATERIALS SCIENCE↗

Machine-learning enabled thermodynamic model for the design of new rare-earth compounds

We employ a descriptor based machine-learning approach to assess the effect of chemical alloying on formation-enthalpy of rare-earth intermetallics. Application of machine-learning approaches in rare-earth intermetallic design have been sparse due to limited availability of reliable datasets. In this work, we developed an ‘in-house’ rare-earth database with more than 600 + compounds, each entry was populated with formation enthalpy and related atomic features using high-throughput density-functional theory (DFT). The SISSO (sure independence screening and sparsifying operator) based machine-learning method with meaningful atomic features was used for training and testing the formation enthalpies of rare earth compounds. The complex lattice function coupled with the machine-learning model was used to explore the effect of transition metal alloying on the energy stability of Ce based cubic Laves phases (MgCu 2 type). The SISSO predictions show good agreement with high-fidelity DFT calculations and X-ray powder diffraction measurements. Our study provides quantitative guidance for compositional considerations within a machine-learning model and discovering new metastable materials. The electronic-structure of Ce-Fe-Cu based compound was also analyzed to get an in-depth understanding of the electronic origin of phase stability. The interpretable analytical models in combination with density-functional theory and experiments provide a fast and reliable design guide for discovering technologically useful materials.

36 MATERIALS SCIENCE↗

Characterization of the atomic-level structure of γ-alumina and (111) Pt/γ-alumina interfaces

The atomic-level structure of platinum/γ-alumina interfaces is characterized in a model system of dense γ-alumina embedded with faceted Pt NPs produced by implantation of platinum ions into sapphire followed by thermal annealing in air at 800 °C. Aberration-corrected scanning transmission electron microscopy (STEM) was used to collect atomic-resolution images, which are compared to STEM image simulations of two experimentally-based bulk models of γ-alumina by Smrčok et al. and Zhou and Snyder. A density functional theory (DFT) based model of (111) interfaces with different chemical terminations (O, Al 1 , Al 2 ) of the γ-alumina developed by Oware Sarfo et al. is also compared to experimental STEM data from Pt/γ-alumina interfaces. Further, the Smrčok γ-alumina model provides a better fit than the Zhou structure to the bulk of the γ-alumina. The oxygen-terminated Oware Sarfo model best fits the experimental data and is a very good model close to the interface. However, the fit of the interface model to the experimental data is poorer beyond the third atomic layer in the γ-alumina. This is attributed to compromises required in the design of the model to limit the cell size and computational time for DFT calculations. Understanding the accuracy and limits of the structural models of γ-alumina and Pt/γ-alumina interfaces is important to further the understanding of the structure/property relationships in this system.

36 MATERIALS SCIENCE↗

Selective oxidation and nickel enrichment hinders the repassivation kinetics of multi-principal element alloy surfaces

Robust and sustained corrosion resistance in multi-principal element alloys (MPEA) requires rapid repassivation, i.e. regrowth of the passive layer once it is damaged or destroyed at the surface. In this study, we show that the repassivation of Al 0.1 CrCoFeNi MPEA in 0.6 M NaCl solution is hindered at pH of ~ 2.4 - 6.8 due to the formation of a Ni-enriched subsurface layer as a result of selective oxidation and dissolution of several principal elements, which can be fully restored at pH of ~ 14 from the oxidation of all principal elements. Specifically, surface characterization via X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field (HAADF) imaging in scanning transmission electron microscopy (STEM), and atom probe tomography (APT), are coupled with density functional theory (DFT) calculations to determine surface composition, oxidation state, and electron work function to uncover the structural origin of the pH-dependent repassivation mechanisms. It was found that selective oxidation of Cr, Co, and Fe in the acidic to neutral solutions altered the surface composition to be significantly enriched in Ni as compared to the bulk. Once the original passive film is destroyed locally by either pitting or tribocorrosion, this altered surface composition exhibited a much poorer repassivation capability due to the increased electron work function and reduced surface reactivity at higher Ni concentration. Finally, these understandings could shed light on the future compositional design of non-equiatomic MPEAs towards sustained repassivation and corrosion resistance over a wide pH range.

36 MATERIALS SCIENCE↗