Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Ares I-X First Stage Separation Loads and Dynamics Reconstruction

The Ares I-X flight test provided NASA with the opportunity to test hardware and gather critical data to ensure the success of future Ares I flights. One of the primary test flight objectives was to evaluate the environment during First Stage separation to better understand the conditions that the J-2X second stage engine will experience at ignition [1]. A secondary objective was to evaluate the effectiveness of the stage separation motors. The Ares I-X flight test vehicle was successfully launched on October 29, 2009, achieving most of its primary and secondary test objectives. Ground based video camera recordings of the separation event appeared to show recontact of the First Stage and the Upper Stage Simulator followed by an unconventional tumbling of the Upper Stage Simulator. Closer inspection of the videos and flight test data showed that recontact did not occur. Also, the motion during staging was as predicted through CFD analysis performed during the Ares I-X development. This paper describes the efforts to reconstruct the vehicle dynamics and loads through the staging event by means of a time integrated simulation developed in TREETOPS, a multi-body dynamics software tool developed at NASA [2]. The simulation was built around vehicle mass and geometry properties at the time of staging and thrust profiles for the first stage solid rocket motor as well as for the booster deceleration motors and booster tumble motors. Aerodynamic forces were determined by models created from a combination of wind tunnel testing and CFD. The initial conditions such as position, velocity, and attitude were obtained from the Best Estimated Trajectory (BET), which is compiled from multiple ground based and vehicle mounted instruments. Dynamic loads were calculated by subtracting the inertial forces from the applied forces. The simulation results were compared to the Best Estimated Trajectory, accelerometer flight data, and to ground based video.

Demory, Lee↗

Role of polarization interaction in photoionization of negative ions of alkali metals

Photoionization processes of negative ions of sodium, potassium, and rubidium were investigated. Calculations of the dependence of the photoionization cross section on the photon energy were performed within the Random Phase Approximation with Exchange for outer subshells (RPAE) and within the Generalized Random Phase Approximation with Exchange (GRPAE) for inner subshells. The latter theoretical approach includes both many-electron correlations and core rearrangement due to escape of one of the electrons from the system. The results of calculations for the negative sodium ion were found to be in good agreement with experimental data. Better agreement was achieved by allowing dynamical polarization of the electron core. It manifests itself as a many-electron response to variation of the external electromagnetic field, which results from the excitation of the many-electron system. Detailed study of the main mechanisms determining the cross section dependence profile was carried out. These mechanisms are the inter- and intrachannel correlations acting as a many-electron response to the external field, the electron core rearrangement, and the dynamic polarization. Besides sodium and potassium ions, photoionization of rubidium ion was investigated. A new method accounting for polarization corrections to optical transition amplitudes based on combination of the Dyson equation and RPAE is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An observational study of the ozone dilution effect: Ozone transport in the austral spring stratosphere

In a previous observational analysis, Atkinson et al (1989) ascribed a sudden decrease in Southern Hemisphere midlatitude total ozone during December 1987 to an 'ozone dilution effect' brought about by the breakup of the polar stratospheric vortex at that time. A question alluded to but unanswered by that study was the degree to which the observed total ozone decrease might have been caused by the quasi-horizontal equatorward transport of 'ozone hold' air from within the vortex, and to what degree by the vertical advection from lower levels of air naturally low in ozone, a dynamical adjustment process which must accompany the equatorward outbreak of a discrete high-latitude airmass. In the present study, analyses of Ertel potential vorticity, TOMS total ozone, and SAGE and ozone sonde vertical profile data are employed using a novel technique to examine the 1987 event in greater detail, to answer this question. Recent progress is then reported in refining the technique and extending the investigation to examine the dynamical evolution of the austral spring stratosphere during other recent years, to shed more light on the precise nature, frequency, and severity of such 'ozone dilution' events, and the effect that this process may have on long term ozone behavior in the Southern Hemisphere.

Atkinson, Roger J.↗

Numerical modeling of pulsed laser-material interaction and of laser plume dynamics

We have developed two-dimensional Arbitrary Lagrangian Eulerian (ALE) code which is used to study the physical processes, the plasma absorption, the crater profile, and the temperature distribution on metallic target and below the surface. The ALE method overcomes problems with Lagrangian moving mesh distortion by mesh smoothing and conservative quantities remapping from Lagrangian mesh to smoothed one. A new second order accurate diffusion solver has been implemented for the thermal conduction and radiation transport on distorted mesh. The results of numerical simulation of pulsed laser ablation are presented. The influences of different processes, such as time evolution of the surface temperature, interspecies interactions (elastic collisions, recombination-dissociation reaction), interaction with an ambient gas are examined. The study presents particular interest for the analysis of experimental results obtained during pulsed laser ablation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long range frequency chirping of Alfvén eigenmodes

In this work, a theoretical framework has been developed for an NBI scenario to model the hard non-linear evolution of global Alfvén eigenmodes (GAEs) where the adiabatic motion of phase-space structures (holes and clumps), associated with frequency chirping, occurs in generalized phase-space of slowing down energetic particles. The radial profile of the GAE is expanded using finite elements, which allows an update of the mode structure as the mode frequency chirps. Constants of motion are introduced to track the dynamics of energetic particles during frequency chirping by implementing proper action-angle variables and canonical transformations which reduce the dynamics essentially to 1D. Consequently, we specify whether the particles are drifting inward/outward as the frequency deviates from the initial MHD eigenfrequency. Using the principle of least action, we have derived the non-linear equation describing the evolution of the radial profile by varying the total Lagrangian of the system with respect to the weights of the finite elements. For the choice of parameters in this work, it is shown that the peak of the radial profile is shifted and also broadens due to frequency chirping. The time rate of frequency change is also calculated using the energy balance and we show that the adiabatic condition remains valid once it is satisfied. This model clearly illustrates the theoretical treatment to study the long-range adiabatic frequency sweeping events observed for Alfvén gap modes in real experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large dynamic range beam diagnostics and beam dynamics studies for high current electron LINACs

As described in the previous reports we have been working on an apodized optical system for transverse beam profile measurements by means of imaging. The key issues of LDR imaging is properly managing diffraction effects within the optical system, which is proposed to accomplish by means of amplitude apodization. Shortly before the time of the last progress report we have finished manufacturing of several apodizing elements. We have completed mechanical design of our first apodized imaging system and have built its prototype on an optical bench. Since testing diagnostic equipment with beam is costly and is not always possible due to limited beam availability, it has been our intention to make as much preliminary testing and characterization on a test bench in the laboratory.

43 PARTICLE ACCELERATORS↗

Dislocation dynamics during the growth of silicon ribbon

The thermal viscoplastic stresses and the dislocation densities in silicon ribbon are computed for an axially changing thermal profile by using an iterative finite difference method. A material constitutive equation (Haasen-Sumino model) which involves an internal variable (mobile dislocation density) is used. The results are interpreted as showing that there is a maximum width of silicon ribbon that can be grown when viscoplasticity and dislocations are considered. This maximum width limitation does not exist if the material behavior is elastic.

Dillon, O. W., Jr.↗

Radial Profiles of the Binary Fraction in Elliptical Galaxies

The radial profile of the binary fraction may vary with environment and is of significant importance for studying the formation mechanisms of binary stars and their dynamical evolution within globular clusters and galaxies. However, existing studies remain limited to the Milky Way and its neighboring galaxies. Leveraging the method proposed by Zhang et al. for estimating the variation in the binary fraction from integrated spectral features, we analyze a sample of 513 elliptical galaxies drawn from the Mapping Nearby Galaxies at Apache Point Observatory survey to measure their radial binary fraction profiles. Our results show that after accounting for the effect induced by radial variations in the stellar population (SP), the median SP-subtracted binary fraction, $r^{\textrm{med}}_{\textrm{b,sub}}$, becomes approximately flat. For nearly all elliptical galaxies in our sample, the variation in the binary fraction relative to the galaxy center at 1R e is less than 5%. No clear correlation is found between the ​​​​​gradient of the binary fraction and the gradients of the SP properties. Moreover, we also compare differences between ultraviolet (UV) upturn and non-UV upturn galaxies. The overall binary fraction profiles and the SP properties of the non-UV upturn galaxies in our sample are comparable to those of the UV upturn galaxies. This similarity may arise from the presence of residual star formation in the non-UV upturn systems.

Li, Xiejin [Chinese Academy of Sciences; Universit↗

Effects of plasma microfields on radiative transitions from atomic levels above the ionization threshold

The effects of plasma electric microfields on line-like optical features arising from atomic levels above the ionization threshold are investigated within the framework of the quasi-static and single-frequency dynamic-field theories of spectral-line broadening. The 2p(23)P to 1s2p(3)P and 2s2p(3)P to 1s2s(3)S transitions in helium and helium-like ions are treated as examples. The mixing of the doubly excited levels in the perturbing microfields produces Stark broadening of the emission lines and induces autoionization of the 2p(23)P level, which, unlike the 2s2p(3)P level, is metastable against autoionization in the field-free environment. Determination of the complete Stark-broadening profiles in thermal plasmas is complicated by the need to include the effects of both the (quasi-static) ion and the (dynamic) electron fields. Under nonequilibrium conditions, where electric fields from either electron or ion plasma waves can far exceed nearby particle fields, the calculation and interpretation of the line shapes may be simplified and could provide a diagnostic probe of the wave-field properties.

Davis, J.↗

Heterogeneity and dynamics in villin headpiece crystal structures

New crystal structures of the well studied protein-folding model system villin headpiece in a new space group provide insights into the conformations available in the folded state. The villin headpiece domain (HP67) is the C-terminal F-actin-binding motif that confers F-actin-bundling activity to villin, a component of the actin bundles that support the brush-border microvilli. It has been investigated extensively by both experimental and theoretical measurements. Our laboratory, for example, has determined both its NMR and its crystal structures. This study presents the structures of HP67 and its pH-stabilized mutant (H41Y) in a different crystal form and space group. For both constructs, two molecules are found in each asymmetric unit in the new space group P6{sub 1}. While one of the two structures (Mol A) is structurally similar to our previously determined structure (Mol X), the other (Mol B) has significant deviations, especially in the N-terminal subdomain, where lattice contacts do not appear to contribute to the difference. In addition, the structurally most different crystal structure, Mol B, is actually closer to the averaged NMR structure. Harmonic motions, as suggested by the B-factor profiles, differ between these crystal structures; crystal structures from the same space group share a similar pattern. Thus, heterogeneity and dynamics are observed in different crystal structures of the same protein even for a protein as small as villin headpiece.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vertical motions of the tropical convective cloud spectrum over Darwin, Australia

Three months of profiler observations from Darwin, Australia are separated into seven cloud types (shallow, mid‐level, and deep convective; weak and robust stratiform rain; and transitional and ice‐only anvil) to provide vertical velocity statistics on the full spectrum of tropical convective clouds over the course of a monsoon season. Consistent with past studies, convective updraughts increase in height and magnitude as the convective cloud height increases. Shallow/mid‐level/deep convection has a mean maximum value of 0.3 m s −1 at 3 km/0.6 m s −1 at 5 km/2.5 m s −1 at 8 km. Deep convective extremes approach 18 m s −1 above 8 km while downdraughts in all convective cloud types are maximum below 4 km. Stratiform vertical velocities are weaker and less varied than in active convection, with maximum mean values <0.25 m s −1 . However, stratiform rain regions associated with larger near‐surface reflectivities (and thus rain rates) have stronger mesoscale up‐ and downdraughts than weaker stratiform rain regions. Anvil cloud with little or no rain near the surface also exhibits mesoscale up‐ and downdraughts, but the vertical velocity profile is shifted up in height by at least 2 km. In addition, anvil updraughts were only 20–50% of the magnitudes in the stratiform rain region. Overall, the vertical motion statistics were similar across the pre‐, active and suppressed monsoon periods. The vertical velocity distributions for each cloud type were also generally consistent with the reflectivity distributions (i.e. the strongest updraughts were often linked to the largest reflectivities), allowing for some linkages between the dynamical and microphysical cloud properties. For example, strong updraughts above the 0 °C level in deep convection are associated with strongly sloping reflectivity profiles supporting the importance of cold rain growth processes, and stronger vertical motions are associated with stratiform rain that has a robust bright band.

Schumacher, Courtney↗

On th meridional surface profile of the Gulf Stream at 55 deg W

Nine-month records from nine inverted echo sounders (IESs) are analyzed to describe the mean baroclinic Gulf Stream at 55 deg W. IES acoustic travel times are converted to thermocline depth which is optimally interpolated. Kinematic and dynamic parameters (Gulf Stream meridional position, velocity, and vorticity) are calculated. Primary Gulf Stream variabiltiy is attributed to meandering and and changes in direction. A mean, stream-coordinate (relative to Gulf Stream instantaneous position and direction) meridional profile is derived and compared with results presented by other investigators. The mean velocity is estimated at 0.84 m/s directed 14 deg to the right eastward, and the thermocline (12 c) drops 657 m (north to south), corresponding to a baroclinic rise of the surface of 0.87 m. The effect of Gulf Stream curvature on temporal mean profiles is found to be unimportant and of minimal importance overall. The derived, downstream current profile is well represented by a Gaussian function and is about 190 km wide where it crosses zero. Surface baroclinic transport is estimated to be 8.5 x 10(exp 4) sq m/s, and maximum shear (flanking the maximum) is 1.2 x 10(exp -5). Results compare well with other in situ observational results from the same time period. On the other hand, analyses (by others) of concurrent satellite altimetry (Geosat) suggest a considerable narrower, more intense mean Gulf Stream.

Hallock, Zachariah R.↗

Investigation of countercurrent flow profile and liquid holdup in random packed column with local CFD data

Liquid holdup and mass transfer area are critical parameters used in packed column design and CO 2 capture efficiency prediction. Compared to experimental methods, 3D computational fluid dynamics (CFD) can provide high-resolution data for studying countercurrent flow hydrodynamics in a packed column. In this paper, a framework was established for modeling the liquid–gas countercurrent flow in a random packed column with pall rings. Besides the column-averaged information, the radial pall ring distribution, velocity, and liquid holdup profiles are obtained in the simulations. The radial two-phase velocity and liquid holdup profiles show significant fluctuations caused by the non-uniform pall ring distribution. The entrance effect and wall influence are also observed in the packed column. By using local countercurrent flow information, the packing specific area $a_p$ and liquid velocity $u_L$ range are significantly expanded for liquid holdup hL prediction. This enables us to develop the liquid holdup correlation with one packing size and six CFD runs only. The proposed power law of the liquid holdup correlation $h_L~u_L^{0.44}$ indicates the random packed column falls in a viscous to turbulent transition regime with a Reynolds Number range of [6.7–40.2]. The derived liquid holdup correlation is in good agreement with existing correlations that are developed using the column-averaged experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-reactive facet specific adsorption as a route to remediation of chlorinated organic contaminants

The present work quantifies metal-contaminant interactions between palladium substrates and three salient chlorinated organic contaminants, namely trichloroethylene 1,3,5-trichlorobenzene (TCB), and 3,3′,4,4′-tetrachlorobiphenyl (PCB77). Given that Pd is one of the conventional catalytically active materials known for contaminant removal, maximizing catalytic efficiency through optimal adsorption dynamics reduces the cost of remediation of contaminants that are persistent water pollutants chronically affecting public health. Adsorption efficiency analyses from all-atom molecular dynamics (MD) simulations advance the understanding of reaction mechanisms available from density functional theory (DFT) calculations to an extractable feature scale that can fit the parametric design of supported metal catalytic systems and feed into high throughput catalyst selection. Data on residence time, site-specific adsorption, binding energies, packing geometries, orientation profiles, and the effect of adsorbate size show the anomalous behaviour of organic contaminant adsorption on the undercoordinated {110} surface as compared to the {111} and {100} surfaces. The intermolecular interaction within contaminants from molecular dynamics simulation exhibits refreshing results than ordinary single molecule density functional theory calculation. Since complete adsorption and dechlorination is an essential step for chlorinated organic contaminant remediation pathways, the presented profiles provide essential information for designing efficient remediation systems through facet-controlled palladium nanoparticles.

Guo, Hao↗

Effects of the resistivity profile on the formation of a reversed configuration and single helicity states in compressible simulations of the reversed-field pinch

Compressible magnetohydrodynamics simulations of the reversed-field pinch (RFP) are presented. Previous simulations of the RFP, including density and pressure evolution, showed that a stationary state with a reversed toroidal magnetic field could not be obtained, contrary to the results produced with numerical codes neglecting density and pressure dynamics. The simulations described in the present paper show that including density and pressure evolution, a stationary RFP configuration can be obtained if the resistivity has a radial profile steeply increasing close to the wall. Such resistivity profile is more realistic than a uniform resistivity, since the temperature at the wall is lower than in the plasma core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Layered Model for Radiation-Induced Chemical Evolution of Icy Surface Composition and Dynamics on Kuiper Belt and Oort Cloud Bodies

The diversity of albedos and surface colors on observed Kuiper Belt and Inner Oort Cloud objects remains to be explained in terms of competition between primordial intrinsic versus exogenic drivers of surface and near-surface evolution. Earlier models have attempted without success to attribute this diversity to the relations between surface radiolysis from cosmic ray irradiation and gardening by meteoritic impacts. A more flexible approach considers the different depth-dependent radiation profiles produced by low-energy plasma, suprathermal, and maximally penetrating charged particles of the heliospheric and local interstellar radiation environment. Generally red objects of the dynamically cold (low inclination, circular orbit) Classical Kuiper Belt might be accounted for from erosive effects of plasma ions and reddening effects of high energy cosmic ray ions, while suprathermal keV-MeV ions could alternatively produce more color neutral surfaces. The deepest layer of more pristine ice can be brought to the surface from meter to kilometer depths by larger impact events and potentially by cryovolcanic activity. The bright surfaces of some larger objects, e.g. Eris, suggest ongoing resurfacing activity. Cycles of atmospheric formation and surface freezeout can further account for temporal variation as observed on Pluto. The diversity of causative processes must therefore be understood to account for observationally apparent diversities of the object surfaces.

Cooper, John F.↗

Time-dependent experimental identification of inter-ELM microtearing modes in the tokamak edge on DIII-D

In a series of discharges on the DIII-D tokamak, fast vertical plasma jogs are used to induce current perturbations in the steep gradient region of the H-mode edge. These current perturbations directly influence the edge q profile, decoupling the resonant location and instability drive of pedestal-localized microtearing modes (MTMs.) By exploiting this effect, we develop and apply a new experimental technique to track the dynamical frequency evolution of MTMs in the pedestal region, providing a compelling validation of the MTM model. The frequency of potential MTMs is calculated as the Doppler-shifted electron diamagnetic frequency at rational q=m/n surfaces, showing remarkable agreement with chirped frequency behavior of n=3, 4 and 5 modes detected with fast magnetics. Data is collected throughout multiple ELM cycles in order to build robust statistics describing the time-dependent frequency evolution of MTMs, which can be explained by examining the recovery of pedestal gradients after an ELM event. MTMs have a dominant transport contribution in the electron thermal channel, so the presented results indicate that reduced models of pedestal transport must be electromagnetic in nature and constructed with accurate calculations of MTM stability; inclusion of this physics is essential for accurate predictions of the electron temperature pedestal profile. Supporting measurements of mode saturation, propagation direction and transport fingerprints are made to support the dynamic frequency determination, unambiguously and experimentally identifying MTMs in the pedestal region of DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Profile observations of the Arctic atmospheric boundary layer with the BELUGA tethered balloon during MOSAiC

During the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, the Balloon-bornE moduLar Utility for profilinG the lower Atmosphere (BELUGA) was deployed from an ice floe drifting in the Fram Strait from 29 June to 27 July 2020. The BELUGA observations aimed to characterize the cloudy Arctic atmospheric boundary layer above the sea ice using a modular setup of five instrument packages. The in situ measurements included atmospheric thermodynamic and dynamic state parameters (air temperature, humidity, pressure, and three-dimensional wind), broadband solar and terrestrial irradiance, aerosol particle microphysical properties, and cloud particle images. In total, 66 profile observations were collected during 33 balloon flights from the surface to maximum altitudes of 0.3 to 1.5 km. The profiles feature a high vertical resolution of 0.01 m to 1 m, including measurements below, inside, and above frequently occurring low-level clouds. This publication describes the balloon operations, instruments, and the obtained data set. We invite the scientific community for joint analysis and model application of the freely available data on PANGAEA.

54 ENVIRONMENTAL SCIENCES↗