Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

LPV Modeling and Control for Active Flutter Suppression of a Smart Airfoil

In this paper, a novel technique of linear parameter varying (LPV) modeling and control of a smart airfoil for active flutter suppression is proposed, where the smart airfoil has a groove along its chord and contains a moving mass that is used to control the airfoil pitching and plunging motions. The new LPV modeling technique is proposed that uses mass position as a scheduling parameter to describe the physical constraint of the moving mass, in addition the hard constraint at the boundaries is realized by proper selection of the parameter varying function. Therefore, the position of the moving mass and the free stream airspeed are considered the scheduling parameters in the study. A state-feedback based LPV gain-scheduling controller with guaranteed H infinity performance is presented by utilizing the dynamics of the moving mass as scheduling parameter at a given airspeed. The numerical simulations demonstrate the effectiveness of the proposed LPV control architecture by significantly improving the performance while reducing the control effort.

Smart Airfoil↗

Estimation of Cometary Rotation Parameters Based on Camera Images

The purpose of the Rosetta mission is the in situ analysis of a cometary nucleus using both remote sensing equipment and scientific instruments delivered to the comet surface by a lander and transmitting measurement data to the comet-orbiting probe. Following a tour of planets including one Mars swing-by and three Earth swing-bys, the Rosetta probe is scheduled to rendezvous with comet 67P/Churyumov-Gerasimenko in May 2014. The mission poses various flight dynamics challenges, both in terms of parameter estimation and maneuver planning. Along with spacecraft parameters, the comet's position, velocity, attitude, angular velocity, inertia tensor and gravitatonal field need to be estimated. The measurements on which the estimation process is based are ground-based measurements (range and Doppler) yielding information on the heliocentric spacecraft state and images taken by an on-board camera yielding informaton on the comet state relative to the spacecraft. The image-based navigation depends on te identification of cometary landmarks (whose body coordinates also need to be estimated in the process). The paper will describe the estimation process involved, focusing on the phase when, after orbit insertion, the task arises to estimate the cometary rotational motion from camera images on which individual landmarks begin to become identifiable.

Spindler, Karlheinz↗

On the applicability of the standard approaches for evaluating a neoclassical radial electric field in a tokamak edge region

The use of the standard approaches for evaluating a neoclassical radial electric field E r , i.e., the Ampere (or gyro-Poisson) equation, requires accurate calculation of the difference between the gyroaveraged electron and ion particle fluxes (or densities). In the core of a tokamak, the nontrivial difference appears only in high-order corrections to a local Maxwellian distribution due to the intrinsic ambipolarity of particle transport. The evaluation of such high-order corrections may be inconsistent with the accuracy of the standard long wavelength gyrokinetic equation (GKE), thus imposing limitations on the applicability of the standard approaches. However, in the edge of a tokamak, charge-exchange collisions with neutrals and prompt ion orbit losses can drive non-intrinsically ambipolar particle fluxes for which a nontrivial (E r -dependent) difference between the electron and ion fluxes appears already in a low order and can be accurately predicted by the long wavelength GKE. As a result, the parameter regimes where the radial electric field dynamics in the tokamak edge region is dominated by the non-intrinsically ambipolar processes, thus allowing for the use of the standard approaches, are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Induced polarization restricts the conformational distribution of a light-harvesting molecular triad in the ground state

The light-harvesting molecular triad consisting of carotenoid polyene (C), diaryl-porphyrin (P) and pyrrole-fullerene (C60) is a donor–acceptor molecule capable of absorbing incident light in the visible range. Its ability to convert solar energy to electrical excitation and charge separation energy suggests a great potential in real-world applications. The ensemble of its conformations under ambient conditions varies widely according to its electronic state. In previous work, we applied a non-polarizable model to study the conformational distribution of the molecular triad in the ground and charge separated states. However, due to the lack of polarization, which imparts subtle changes in the charge distribution on atoms, molecular simulations fail to produce accurate average dipole moments. We developed the first polarizable model for a molecular triad to investigate the structural and dynamic properties of a molecular triad in the ground state in an explicit organic solvent, tetrahydrofuran (THF). We performed first-principles electronic structure calculations of the individual components in the triad as well as THF and then fit the partial atomic charges to the electrostatic potential using the i-RESP methodology. We validated these force field parameters by comparing the thermodynamic and dynamic properties obtained from molecular dynamics simulations with those from experiments. We enhanced the sampling of the triad conformations with replica exchange molecular dynamics simulations. We characterized the effects of induced polarization on the structural stability of the triad by analyzing the free energy landscapes constructed with polarizable force fields. Furthermore, by using principal component analysis, we found that the molecular triad conformations adopted a small range of torsional angles with induced polarization. The triad conformation solvated in polar solvent with a polarizable force field qualitatively agrees with that obtained from nuclear magnetic resonance spectroscopy.

Starovoytov, Oleg N.↗

Long-term measurements in a mixed-grass prairie reveal a change in soil organic carbon recalcitrance and its environmental sensitivity under warming

Soil respiration, the major pathway for ecosystem carbon (C) loss, has the potential to enter a positive feedback loop with the atmospheric CO2 due to climate warming. For reliable projections of climate-carbon feedbacks, accurate quantification of soil respiration and identification of mechanisms that control its variability are essential. Process-based models simulate soil respiration as functions of belowground C input, organic matter quality, and sensitivity to environmental conditions. However, evaluation and calibration of process-based models against the long-term in situ measurements are rare. Here, we evaluate the performance of the Terrestrial ECOsystem (TECO) model in simulating total and heterotrophic soil respiration measured during a 16-year warming experiment in a mixed-grass prairie; calibrate model parameters against these and other measurements collected during the experiment; and explore whether the mechanisms of C dynamics have changed over the years. Calibrating model parameters against observations of individual years substantially improved model performance in comparison to pre-calibration simulations, explaining 79–86% of variability in observed soil respiration. Interannual variation of the calibrated model parameters indicated increasing recalcitrance of soil C and changing environmental sensitivity of microbes. Overall, we found that (1) soil organic C became more recalcitrant in intact soil compared to root-free soil; (2) warming offset the effects of increasing C recalcitrance in intact soil and changed microbial sensitivity to moisture conditions. Furthermore, these findings indicate that soil respiration may decrease in the future due to C quality, but this decrease may be offset by warming-induced changes in C cycling mechanisms and their responses to moisture conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Development of a New Method to Investigate the Dynamic Friction Behavior of Interfaces Using a Kolsky Tension Bar

In order to understand interfacial interaction of a bi-material during an impact loading event, the dynamic friction coefficient is one of the key parameters that must be characterized and quantified. In this study, a new experimental method to determine the dynamic friction coefficient between two metals was developed by using a Kolsky tension bar and a custom-designed friction fixture. Polyvinylidene fluoride (PVDF) force sensors were used to measure the normal force applied to the friction tribo pairs and the friction force was measured with conventional Kolsky tension bar method. To evaluate the technique, the dynamic friction coefficient between 4340 steel and 7075-T6 aluminum was investigated at an impact speed of approximately 8 m/s. Additionally, the dynamic friction coefficient of the tribo pairs with varied surface roughness was also investigated. The data suggest that higher surface roughness leads to higher friction coefficients at the same speed of 8 m/s.

36 MATERIALS SCIENCE↗

A diffusion-kinetic model for pulverized-coal combustion and heat-and-mass transfer in a gas stream

A diffusion-kinetic model for pulverized-coal combustion and heat-and-mass transfer in a gas stream is proposed, and the results of numerical simulation of the burnout dynamics of Kansk-Achinsk coals in the pulverized state at different treatment conditions and different model parameters are presented. The mathematical model describes the dynamics of thermochemical conversion of solid organic fuels with allowance for complex physicochemical phenomena of heat-and-mass exchange between coal particles and the gaseous environment.

01 COAL, LIGNITE, AND PEAT↗

Space shuttle flying qualities and criteria assessment

Work accomplished under a series of study tasks for the Flying Qualities and Flight Control Systems Design Criteria Experiment (OFQ) of the Shuttle Orbiter Experiments Program (OEX) is summarized. The tasks involved review of applicability of existing flying quality and flight control system specification and criteria for the Shuttle; identification of potentially crucial flying quality deficiencies; dynamic modeling of the Shuttle Orbiter pilot/vehicle system in the terminal flight phases; devising a nonintrusive experimental program for extraction and identification of vehicle dynamics, pilot control strategy, and approach and landing performance metrics, and preparation of an OEX approach to produce a data archive and optimize use of the data to develop flying qualities for future space shuttle craft in general. Analytic modeling of the Orbiter's unconventional closed-loop dynamics in landing, modeling pilot control strategies, verification of vehicle dynamics and pilot control strategy from flight data, review of various existent or proposed aircraft flying quality parameters and criteria in comparison with the unique dynamic characteristics and control aspects of the Shuttle in landing; and finally a summary of conclusions and recommendations for developing flying quality criteria and design guides for future Shuttle craft.

Myers, T. T.↗

Global mesoscale variability from the Geosat Exact Repeat Mission - Correlation with ocean depth

A simple derivative filter technique for extracting mesoscale variability from satellite altimeter data having large-amplitude, long-wavelength errors, with no data adjustments necessary, is presented. The method is applied to the first year of Geosat Exact Repeat Mission data. The main advantage over previous filter methods is that the derivative filter is only two points long, so that it produces no edge effects. Short profiles can thus be included in the analysis. The derivative filter also transforms a dynamic height profile into a dynamic slope profile. The dynamic slope of the sea surface is a parameter that can be measured independently. Moreover, if the ocean current is in geostrophic balance, then the dynamic gradient of the sea surface is proportional to the current velocity.

Sandwell, David T.↗

Insights Into the Hydrology of the Congo Peatlands Through Land Surface Modeling and Data Assimilation

The 16.8 million ha of peatlands in the Cuvette Centrale wetland complex in the Congo Basin is one of the largest peatland regions on Earth but still highly understudied. Understanding the hydrological functioning of these peatlands and the effects of external disturbances thereon remains a major challenge. Recent research suggested fundamental hydrological differences between the Congo peatlands and the well-studied Southeast Asian peatlands. The Congo peatlands have a doming gradient that is up to ten times smaller, and they are influenced by river hydrology to some extent. In this study, we explore the Congo peatland hydrology through land surface modeling and data assimilation. We build upon our recently developed tropical PEATCLSM module (Apers et al., 2022) that was parameterized based on data from Southeast Asian peatlands due to the lack of field data from other tropical peatland regions. In a first step, we derive Congo-specific peat hydraulic and discharge function parameters from a scalar parametrization of water level dynamics in the Congo peatlands, using observed water level data at two locations. These Congo-specific parameters differ considerably from the original literature-based parameters from Southeast Asian peatlands. In a second step, we apply our original and Congo-specific parameters in an assimilation scheme for L-band brightness temperature (Tb) data from the Soil Moisture and Ocean Salinity (SMOS) mission. The data assimilation results are used in two ways. First, the effect of these parameters on the simulated peatland hydrology and the observation-minus-forecast Tb residuals is evaluated. It is hypothesized that the new parameters reduce the previously reported modeling errors over the Congo peatlands and reduce the residuals in Tb as well. Second, we analyze the data assimilation diagnostics to learn about other model improvement possibilities. In preliminary results, we found long periods of temporally autocorrelated total water storage increments (difference of pre- and post-update) that coincided with anomalies in river stages measured upstream of the peatlands. Since PEATLCSM neglects possible river influence, this concurrence suggests that the typically used grid-based approach of land surface models should be combined with a river routing scheme over the Congo peatlands.

Sebastian Apers↗

Atomistic simulation of CdTe solid-liquid coexistence equilibria

Atomistic simulations of CdTe using a Stillinger-Weber (S-W) interatomic potential were undertaken to model the solid-liquid phase equilibria of this important compound semiconductor. Although this potential has been used by others to study liquid CdTe and vapor-liquid interface, it is based on fitting parameters optimized only for the zincblende solid. It has not been fully explored as a potential for solid-liquid phase equilibria until this work. This research reports an accurate determination of the melting temperature, TM=1305K near P=0, the heat of fusion at melting and as a function of temperature up to 1700K, and on the relative phase densities with a particular emphasis on the melting line. The S-W potential for CdTe predicts a liquid with a density slightly less than that of the solid and, hence, the pressure-temperature melting line has a positive slope. The pair correlation structure of the liquid is determined and favorably compared to neutron scattering data. The liquid-solid interface is discussed using density profiles and a short-range order parameter for models having principal orientations along <100>, <110>, and <111> crystallographic directions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hydrodynamic Analysis and Optimization of Aquantis Marine Turbine: Cooperative Research and Development (Final Report)

The primary aim of this proposal is to improve the accurate prediction of hydrodynamic performance and dynamic load responses of the AQ10 floating axial-flow tidal turbine with a tri-cat mooring configuration. The validation of reduced-order modeling approaches with high-fidelity model will be implemented. Additionally, the frequency response domain, Response Amplitude Floating Wind (RAFT) toolbox plus an optimizer expanded for marine hydrokinetic turbines under the Submarine Hydrokinetic And Riverine Kilo-megawatt. Systems (SHARKS) program will be used for designing and exploring different key design parameters (platform dimension, mooring layout and its parameters) of next marine hydrokinetic (MHK) turbine generation.

16 TIDAL AND WAVE POWER↗

Jammed Limit of Bijel Structure Formation

Over the past decade, methods to control microstructure in heterogeneous mixtures by arresting spinodal decomposition via the addition of colloidal particles have led to an entirely new class of bicontinuous materials known as bijels. We present a new model for the development of these materials that yields to both numerical and analytical evaluation. This model reveals that a single dimensionless parameter that captures both chemical and environmental variables dictates the dynamics and ultimate structure formed in bijels. We also demonstrate that this parameter must fall within a fixed range in order for jamming to occur during spinodal decomposition, as well as show that known experimental trends for the characteristic domain sizes and time scales for formation are recovered by this model.

36 MATERIALS SCIENCE↗

Hybridized Methods for Quantum Simulation in the Interaction Picture

Conventional methods of quantum simulation involve trade-offs that limit their applicability to specific contexts where their use is optimal. In particular, the interaction picture simulation has been found to provide substantial asymptotic advantages for some Hamiltonians, but incurs prohibitive constant factors and is incompatible with methods like qubitization. We provide a framework that allows different simulation methods to be hybridized and thereby improve performance for interaction picture simulations over known algorithms. These approaches show asymptotic improvements over the individual methods that comprise them and further make interaction picture simulation methods practical in the near term. Physical applications of these hybridized methods yield a gate complexity scaling as log 2 &#x2061; &#x039B; in the electric cutoff &#x039B; for the Schwinger Model and independent of the electron density for collective neutrino oscillations, outperforming the scaling for all current algorithms with these parameters. For the general problem of Hamiltonian simulation subject to dynamical constraints, these methods yield a query complexity independent of the penalty parameter &#x03BB; used to impose an energy cost on time-evolution into an unphysical subspace.

97 MATHEMATICS AND COMPUTING↗

Dynamics of O{sup 6+} + H electron capture in Debye plasmas and properties of resulting O{sup 5+}(nl) emission spectra

The electron capture in O{sup 6+}-H collisions is studied by the two-center atomic orbital close-coupling (TC-AOCC) method when the interactions of charged particles are screened and have a Yukawa form. Atomic orbitals and eigenenergies of n {<=} 6 states on O{sup 5+} and n {<=} 2 states on H are calculated as a function of the interaction screening parameter and used in the AOCC dynamics scheme to calculate the electron capture cross sections in the energy range 1-200 keV/u. It is shown that the degree of interaction screening reduces the electron binding energies, the number of open electron capture channels, and the strength of exchange couplings, thus affecting the entire collision dynamics and the magnitude and energy behavior of electron capture cross sections. The state-selective electron capture cross sections in this collision system, as well as the intensities of a number of charge exchange spectral lines, for a number of representative interaction screening strengths are presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic simulations of ignited mode cesium vapor thermionic converters

Cesium vapor thermionic converters are an attractive method of converting high-temperature heat directly to electricity, but theoretical descriptions of the systems have been difficult due to the multi-step ionization of Cs through inelastic electron–neutral collisions. This work presents particle-in-cell simulations of these converters, using a direct simulation Monte Carlo collision model to track 52 excited states of Cs. Here, these simulations show the dominant role of multi-step ionization, which also varies significantly based on both the applied voltage bias and pressure. The electron energy distribution functions are shown to be highly non-Maxwellian in the cases analyzed here. A comparison with previous approaches is presented, and large differences are found in ionization rates due especially to the fact that previous approaches have assumed Maxwellian electron distributions. Finally, an open question regarding the nature of the plasma sheaths in the obstructed regime is discussed. The one-dimensional simulations did not produce stable obstructed regime operation and thereby do not support the double-sheath hypothesis.

30 DIRECT ENERGY CONVERSION↗

Scaling Laws of Exciton Recombination Kinetics in Low Dimensional Halide Perovskite Nanostructures

Carrier recombination is a crucial process governing the optical properties of a semiconductor. Although various theoretical approaches have been utilized to describe carrier behaviors, a quantitative understanding of the impact of defects and interfaces in low dimensional semiconductor systems is still elusive. Here, we develop a model system consisting of chemically tunable, highly luminescent halide perovskite nanocrystals to illustrate the role of carrier diffusion and material dimensionality on the carrier recombination kinetics and luminescence efficiency. Our advanced synthetic methods provide a well-controlled colloidal system consisting of nanocrystals with different aspect ratios, halide compositions, and surface conditions. Using this system, we reveal the scaling laws of photoluminescence quantum yield and radiative lifetime with respect to the aspect ratio of nanocrystals. The scaling laws derived herein are not only a phenomenological observation but proved a powerful tool disentangling the carrier dynamics of microscopic systems in a quantitative and interpretable manner. The investigation of our model system and theoretical formulation bring to light the dimensionality, as a hidden constraint on carrier dynamics, and identify the diffusion length as an important parameter that distinguishes nanoscale and macroscale carrier behaviors. Furthermore, the conceptual distinction in carrier dynamics in different dimensionality regimes informs new design rules for optical devices where complex microstructures are involved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO-ORBITAL OLIGARCHY

We present a systematic examination of the changes in semimajor axis of a protoplanet as it interacts with other protoplanets in the presence of eccentricity dissipation. For parameters relevant to the oligarchic stage of planet formation, dynamical friction keeps the typical eccentricities small and prevents orbit crossing. Interactions at impact parameters greater than several Hill radii cause the protoplanets to repel each other; if the impact parameter is instead much less than the Hill radius, the protoplanets shift slightly in semimajor axis but remain otherwise unperturbed. If the orbits of two or more protoplanets are separated by less than a Hill radius, they are each pushed toward an equilibrium spacing between their neighbors and can exist as a stable co-orbital system. In the shear-dominated oligarchic phase of planet formation, we show that the feeding zones contain several oligarchs instead of only one. Growth of the protoplanets in the oligarchic phase drives the disk to an equilibrium configuration that depends on the mass ratio of protoplanets to planetesimals, {sigma}/{sigma}. Early in the oligarchic phase, when {sigma}/{sigma} is low, the spacing between rows of co-orbital oligarchs are about 5 Hill radii wide, rather than the 10 Hill radii cited in the literature. It is likely that at the end of oligarchy, the average number of co-orbital oligarchs is greater than unity. In the outer solar system, this raises the disk mass required to form the ice giants. In the inner solar system, this lowers the mass of the final oligarchs and requires more giant impacts than previously estimated. This result provides additional evidence that Mars is not an untouched leftover from the oligarchic phase, but must be composed of several oligarchs assembled through giant impacts.

79 ASTRONOMY AND ASTROPHYSICS↗