Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gas atomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Property enchancement of polyimide films by way of the incorporation of lanthanide metal ions

Lanthanide metal ions were incorporated into the polyimide derived from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 1,3-bis(aminophenoxy) benzene (APB) in an attempt to produce molecular level metal-polymer composites. The lanthanide series of metal ions (including aluminum, scandium, and yttrium) provide discrete and stable metal ions in the 3+ oxidation state. Throughout the series there is a uniform variation in ionic size ranging from 50 pm for aluminum to a maximum of 103.4 pm for cerium and gradually decreasing again to 84.8 pm for lutetium. The high charge-to-size ratio for these ions as well as the ability to obtain large coordination numbers makes them excellent candidates for interacting with the polymer substructure. The distinct lack of solubility of simple lanthanide salts such as the acetates and halides has made it difficult to obtain metal ions distributed in the polymer framework as discrete ions or metal complexes rather than microcomposites of metal clusters. (Lanthanum nitrates are quite soluble, but the presence of the strongly oxidizing nitrate ion leads to serious degradation of the polymer upon thermal curing. This work was successful at extending the range of soluble metals salts by using chelating agents derived from the beta-diketones dipivaloylmethane, dibenzoylmethane, trifluoroacetylacetone, and hexafluoroacetylacetone. Metal acetates which are insoluble in dimethylacetamide dissolve readily in the presence of the diketones. Addition of the polyimide yields a homogeneous resin which is then cast into a clear film. Upon curing clear films were obtained with the dibenzoylmethane and trifluoroacetylacetone ligands. The dipavaloylmethane precipitates the metal during the film casting process, and hexafluoroacetylacetone gives cured films which are deformed and brittle. These clear films are being evaluated for the effect of the metal ions on the coefficient of thermal expansion, resistance to atomic oxygen, and on selective gas permeability. Much more commonly than above, polyimide films are prepared by casting the film as the poly(amic acid) precursor which is then converted to the imidized form during the thermal cure cycle. Very limited success was achieved in the past in adding lanthanide metal ions to the amide precursors because of gellation and lack of solubility. With the use of the diketone ligands cited above, the solubility and gellation problems were overcome. However, the films after curing were clear but unacceptably brittle. Attempts to overcome this cure embrittlement problem are in progress.

Thompson, David W.↗

Fluoropolymer Films Deposited by RF Plasma Sputtering of Polytetrafluoroethylene Using Inert Gases

The FT-IR (Fourier Transform Infrared), UV (Ultraviolet) and XPS (X Ray Photoelectron Spectroscopy) spectra of fluoropolymer films (SPTFE) deposited by rf (radio frequency) plasma sputtering of polytetrafluoroethylene (PTFE), using Ne, Kr and Xe as sputtering gases, were obtained and compared with prior spectra for SPTFE formed using He and Ar. The F/C (fluorine / carbon) ratios for SPTFE films (1.44-1.55), obtained at a rf power of 10 W, were essentially the same for all five rare gases, there being no trend of decreasing fluorine content in the SPTFE product with increasing atomic weight of the sputtering gas - contrary to the momentum transfer notion advanced by M. E. Ryan, et al. Increasing rf power from 10 to 50 W resulted in successively lower F/C ratios for SPTFE (e.g., from 1.55 to 1.21 in the case of Xe plasma-sputtered PTFE), accompanied by sputtering of the glass reactor and deposition of fragments of sodium aluminum silicate occurring at 40 W and above. In order to achieve a "Teflon-like" SPTFE structure (i.e., products with as high a F/C ratio as possible) in a given plasma reactor, an optimum rf power must be found, which in the present case was approximately 10 W.

Golub, Morton A.↗

Mercury's Na Exosphere from MESSENGER Data

MESSENGER entered orbit about Mercury on March 18, 2011. Since then, the Ultraviolet and Visible Spectrometer (UWS) channel of MESSENGER's Mercury Atmospheric and Surface Composition Spectrometer (MASCS) has been observing Mercury's exosphere nearly continuously. Daily measurements of Na brightness were fitted with non-uniform exospheric models. With Monte Carlo sampling we traced the trajectories of a representative number of test particles, generally one million per run per source process, until photoionization, escape from the gravitational well, or permanent sticking at the surface removed the atom from the simulation. Atoms were assumed to partially thermally accommodate on each encounter with the surface with accommodation coefficient 0.25. Runs for different assumed source processes are run separately, scaled and co-added. Once these model results were saved onto a 3D grid, we ran lines of sight from the MESSENGER spacecraft :0 infinity using the SPICE kernels and we computed brightness integrals. Note that only particles that contribute to the measurement can be constrained with our method. Atoms and molecules produced on the nightside must escape the shadow in order to scatter light if the excitation process is resonant-light scattering, as assumed here. The aggregate distribution of Na atoms fits a 1200 K gas, with a PSD distribution, along with a hotter component. Our models constrain the hot component, assumed to be impact vaporization, to be emitted with a 2500 K Maxwellian. Most orbits show a dawnside enhancement in the hot component broadly spread over the leading hemisphere. However, on some dates there is no dawn/dusk asymmetry. The portion of the hot/cold source appears to be highly variable.

Killen, Rosemary M.↗

High Fidelity Simulations of Air-Cooled Reactor Cavity Cooling System

Nuclear energy is increasingly acknowledged as pivotal in the global shift towards cleaner energy solutions. Advanced nuclear technologies, including High Temperature Gas-cooled Reactors (HTGRs), stand out as appealing options among Generation IV reactors due to their high temperature heat output and potential for cogeneration. HTGR designs incorporate passive safety systems, such as the Reactor Cavity Cooling System (RCCS), which utilize natural principles to manage heat dissipation from the reactor pressure vessel (RPV) during accidents or routine shutdowns. Regulatory bodies require thorough validation of safety systems like the RCCS to ensure they meet specified standards. Consequently, there is a pressing need within the industry for advanced simulation tools capable of assessing these systems’ performance accurately. There is a knowladge gap in the literature concerning high-fidelity data for the RCCS, which motivates the focus of this study. This research focuses on a specific RCCS designed for the Modular High-Temperature Gas Reactor developed by General Atomics (GA- MHTGR). Experimental studies on a scaled version of the air-cooled RCCS of GA-MHTGR were conducted by the University of Wisconsin-Madison. This work contributes to a broader initiative aimed at establishing a numerical benchmark based on the UW-Madison experiments. As first step we performed high fidelity simulations of the experimental facility setup, to analyze flow physics in such systems and validate NekRS and the MOOSE heat transfer and radiation modules.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modeling of Prismatic High Temperature Reactors in Pronghorn

Pronghorn is a MOOSE based thermal-hydraulics code developed at Idaho National Laboratory (INL) for advanced nuclear reactor analysis. It has been previously applied to model pebble-bed high temperature reactors (HTRs), liquid-metal cooled reactors, and molten salt reactors, among others. This work leverages the coarse-mesh modeling capabilities in Pronghorn to model the Oregon State University (OSU)'s High Temperature Test Facility (HTTF). The HTTF is a 1:4 height scaled-down facility of General Atomics' Modular High Temperature Gas-cooled Reactor (MHTGR). The facility is primarily built to generate data for code and model validation, and does not precisely replicate MHTGR conditions. Nevertheless, it encompasses the main physics associated with MHTGR transients.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

RAVEN Template for Dynamic Representativity Analysis of the High Temperature Test Facility

These slides present a walkthrough of the template that has been developed for using RAVEN to perform representativity analysis using models of the High Temperature Test Facility and the General Atomics Modular High Temperature Gas-cooled Reactor. The presentation provides participants in the HTTF benchmark with a walkthrough on how to use RAVEN for their sensitivity analysis and how to read results from the MHTGR-350 to perform representativity

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Sintering Mechanism of Pt/Al 2 O 3 in Complex Emission Gases Elucidated via In Situ Environmental STEM

Emission control catalysts are crucial for protecting human health by preventing the release of harmful gases and unburnt fuel into the atmosphere. These catalysts often face deactivation through sintering processes in high-temperature, chemically reactive environments containing multiple gas species. Here, we use in situ environmental scanning transmission electron microscopy to monitor the sintering behavior and transient morphologies of Pt/Al 2 O 3 in various relevant gas environments through controlled experiments. Our results reveal the particle migration and atomic ripening behavior of Pt/Al 2 O 3 at the atomic scale in the presence of water vapor and oxygen, which differs from behaviors observed in single gas environments. We identify an atomic ripening mechanism involving the dissociation and migration of Pt adatom chains from Pt nanoparticles, observed only in combinational gases. Finally, these findings provide valuable insights into catalyst degradation behavior in complex gas environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature atomic layer deposition of highly photoactive hematite using iron(iii) chloride and water

Nanostructured hematite (α-Fe2O3) has been widely studied for use in a variety of thin film applications including solar energy conversion, water oxidation, catalysis, lithium-ion batteries, and gas sensing. Among established deposition methods, atomic layer deposition (ALD) is a leading technique for controlled synthesis of a wide range of nanostructured materials. In this work, ALD of Fe2O3 is demonstrated using FeCl3 and H2O precursors at growth temperatures between 200 and 350 °C. Self-limiting growth of Fe2O3 is demonstrated with a growth rate of ~0.6 Å per cycle. As-deposited, films are nanocrystalline with low chlorine impurities and a mixture of α- and γ-Fe2O3. Post-deposition annealing in O2 leads to phase-pure α-Fe2O3 with increased out-of-plane grain size. Photoelectrochemical measurements under simulated solar illumination reveal high photoactivity toward water oxidation in both as-deposited and post-annealed films. Planar films deposited at low temperature (235 °C) exhibit remarkably high photocurrent densities ~0.71 mA cm-2 at 1.53 V vs. the reversible hydrogen electrode (RHE) without further processing. Films annealed in air at 500 °C show current densities of up to 0.84 mA cm-2 (1.53 V vs. RHE).

36 MATERIALS SCIENCE↗

Determination of the number density of excited and ground Zn atoms during rf magnetron sputtering of ZnO target

A combination of optical absorption spectroscopy (OAS) and optical emission spectroscopy measurements was used to monitor the number density of Zn atoms in excited 4s4p ({sup 3}P{sub 2} and {sup 3}P{sub 0}) metastable states as well as in ground 4s{sup 2} ({sup 1}S{sub 0}) state in a 5 mTorr Ar radio-frequency (RF) magnetron sputtering plasma used for the deposition of ZnO-based thin films. OAS measurements revealed an increase by about one order of magnitude of Zn {sup 3}P{sub 2} and {sup 3}P{sub 0} metastable atoms by varying the self-bias voltage on the ZnO target from −115 to −300 V. Over the whole range of experimental conditions investigated, the triplet-to-singlet metastable density ratio was 5 ± 1, which matches the statistical weight ratio of these states in Boltzmann equilibrium. Construction of a Boltzmann plot using all Zn I emission lines in the 200–500 nm revealed a constant excitation temperature of 0.33 ± 0.04 eV. In combination with measured populations of Zn {sup 3}P{sub 2} and {sup 3}P{sub 0} metastable atoms, this temperature was used to extrapolate the absolute number density of ground state Zn atoms. The results were found to be in excellent agreement with those obtained previously by actinometry on Zn atoms using Ar as the actinometer gas [L. Maaloul and L. Stafford, J. Vac. Sci. Technol., A 31, 061306 (2013)]. This set of data was then correlated to spectroscopic ellipsometry measurements of the deposition rate of Zn atoms on a Si substrate positioned at 12 cm away from the ZnO target. The deposition rate scaled linearly with the number density of Zn atoms. In sharp contrast with previous studies on RF magnetron sputtering of Cu targets, these findings indicate that metastable atoms play a negligible role on the plasma deposition dynamics of Zn-based coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PHOTOCHEMICAL HEATING OF DENSE MOLECULAR GAS

Photochemical heating is analyzed with an emphasis on the heating generated by chemical reactions initiated by the products of photodissociation and photoionization. The immediate products are slowed down by collisions with the ambient gas and then heat the gas. In addition to this direct process, heating is also produced by the subsequent chemical reactions initiated by these products. Some of this chemical heating comes from the kinetic energy of the reaction products and the rest from collisional de-excitation of the product atoms and molecules. In considering dense gas dominated by molecular hydrogen, we find that the chemical heating is sometimes as large, if not much larger than, the direct heating. In very dense gas, the total photochemical heating approaches 10 eV per photodissociation (or photoionization), competitive with other ways of heating molecular gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A search for O{sub 2} in co-depleted molecular cloud cores with Herschel

The general lack of molecular oxygen in molecular clouds is an outstanding problem in astrochemistry. Extensive searches with the Submillimeter Astronomical Satellite, Odin, and Herschel have only produced two detections; upper limits to the O{sub 2} abundance in the remaining sources observed are about 1000 times lower than predicted by chemical models. Previous atomic oxygen observations and inferences from observations of other molecules indicated that high abundances of O atoms might be present in dense cores exhibiting large amounts of CO depletion. Theoretical arguments concerning the oxygen gas–grain interaction in cold dense cores suggested that, if O atoms could survive in the gas after most of the rest of the heavy molecular material has frozen out onto dust, then O{sub 2} could be formed efficiently in the gas. Using Herschel HIFI, we searched a small sample of four depletion cores—L1544, L694-2, L429, and Oph D—for emission in the low excitation O{sub 2} N {sub J} = 3{sub 3}–1{sub 2} line at 487.249 GHz. Molecular oxygen was not detected and we derive upper limits to its abundance in the range of N(O{sub 2})/N(H{sub 2}) ≈ (0.6--1.6) × 10{sup −7}. We discuss the absence of O{sub 2} in the light of recent laboratory and observational studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional radiation-hydrodynamics calculations of the envelopes of young planets embedded in protoplanetary disks

We perform global three-dimensional (3D) radiation-hydrodynamics calculations of the envelopes surrounding young planetary cores of 5, 10, and 15 Earth masses, located in a protoplanetary disk at 5 and 10 AU from a solar-mass star. We apply a nested-grid technique to resolve the thermodynamics of the disk at the orbital-radius length scale and that of the envelope at the core-radius length scale. The gas is modeled as a solar mixture of molecular and atomic hydrogen, helium, and their ions. The equation of state accounts for both gas and radiation, and gas energy includes contributions from rotational and vibrational states of molecular hydrogen and from ionization of atomic species. Dust opacities are computed from first principles, applying the full Mie theory. One-dimensional (1D) calculations of planet formation are used to supplement the 3D calculations by providing energy deposition rates in the envelope due to solids accretion. We compare 1D and 3D envelopes and find that masses and gas accretion rates agree within factors of 2, and so do envelope temperatures. The trajectories of passive tracers are used to define the size of 3D envelopes, resulting in radii much smaller than the Hill radius and smaller than the Bondi radius. The moments of inertia and angular momentum of the envelopes are determined and the rotation rates are derived from the rigid-body approximation, resulting in slow bulk rotation. We find that the polar flattening is ≲ 0.05. The dynamics of the accretion flow are examined by tracking the motion of tracers that move into the envelope. The anisotropy of this flow is characterized in terms of both its origin and impact site at the envelope surface. Gas merges with the envelope preferentially at mid- to high latitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental results on atomic oxygen corrosion of silver

The results of an experimental study of the reaction kinetics of silver with atomic oxygen in 10 degree increments over the temperature range of 0 to 70 C is reported. The silver specimens, of the order of 10,000 A in thickness, were prepared by thermal evaporation onto 3 inch diameter polished silicon wafers. There were later sliced into pieces having surface areas of the order of 1/4 to 1/2 square inch. Atomic oxygen was generated by a gas discharge in a commercial plasmod asher operating in the megahertz frequency range. The sample temperature within the chamber was controlled by means of a thermoelectric unit. Exposure of the silver specimens to atomic oxygen was incremental, with oxide film thickness measurements being carried out between exposures by means of an automated ellipsometer. For the early growth phase, the data can be described satisfactorily by a logarithmic growth law: the oxide film thickness increases as the logarithm of the exposure time. Furthermore, the oxidation process is thermally activated, the rate increasing with increasing temperature. However, the empirical activation energy parameter deduced from Arrhenius plots is quite low, being of the order of 0.1 eV.

Fromhold, Albert T.↗

Metal Atomization (Materials Preparation Center)

The following video is a slow motion capture of an atomization event. Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. This material was cast at the Ames Laboratorys Materials Preparation Center http://www.mpc.ameslab.gov

36 MATERIALS SCIENCE↗

Analytical approach to relaxation dynamics of condensed Bose gases

Research Highlights: > Time evolution of perturbations from equilibrium in a condensed Bose gas is studied. > Just below the critical temperature the perturbations vanish algebraically. > Anisotropic perturbations are unstable. > At very low temperature perturbations decay exponentially. - Abstract: The temporal evolution of a perturbation of the equilibrium distribution of a condensed Bose gas is investigated using the kinetic equation which describes collision between condensate and noncondensate atoms. The dynamics is studied in the low momentum limit where an analytical treatment is feasible. Explicit results are given for the behavior at large times in different temperature regimes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the formation of copper nanoparticles in nanocluster aggregation source

The influence of pressure and type of inert gas (Ar and Kr) on the morphology and size distribution of nanoparticles produced in a nanocluster source is studied experimentally. The experimental data are used to validate the model of cluster formation from a supersaturated atomic vapor in an inert buffer gas, which has been developed in our previous paper. The model predictions are in accordance with the experimental findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hot interstellar gas in the Galactic disk and halo

The diagnostic methods used to study the hot interstellar medium (ISM) are discussed. Observational results for hot gas in the Galactic disk and halo are presented with attention given to absorption line and diffuse X-ray emission studies. It is noted that UV measurements of O I and other highly ionized atoms are a good probe of gas with temperatures near 1-300,000 K. An overview is given of the theory of the hot ISM as it might apply to disk and halo gas. A combination of the galactic fountain and the photoionized halo models may describe hot gas in the Galactic halo.

Savage, Blair D.↗

Atomic and molecular effects on spherically convergent ion flow. I. Single atomic species

A formalism for analyzing the effect of ion-neutral gas interactions on the flow of ions between nearly transparent electrodes in spherical geometry has been developed for atomic ions in a weakly ionized plasma, so that the important atomic effects are charge exchange and ion impact ionization. The formalism is applied to spherical, gridded, inertial-electrostatic confinement (IEC) devices. The formalism yields detailed information about the energy spectra of the ions and fast neutral atoms, and the resulting fusion rate for {sup 3}He ions in a background {sup 3}He gas. The results are illustrated with an example calculation for the Wisconsin IEC device operating on {sup 3}He.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗