Search NASA⌕ Search

SEARCH · Search NASA

Results for “High order method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Enhanced high harmonic generation and the phase effect in double-sided relativistic laser-foil interaction

High harmonic generation (HHG) from relativistic laser-foil interaction is investigated analytically and through particle-in-cell simulations. Previous work has shown that when two counter-propagating circularly polarized (CP) laser pulses interact with a thin foil, electrons can be well confined spatially to form a high density layer. The layer electrons oscillate in certain transversal direction and radiate intense high order harmonics. It is demonstrated here that there is a critical foil thickness, only below which can high harmonics be generated efficiently. Furthermore, to enhance the intensity in higher order region, the third linearly polarized (LP) short-wavelength laser pulse with much lower intensity is introduced. Analysis and simulations both show that the enhancement is determined by the relative phase {delta}{phi} between the driving CP laser pulses and LP pulse. The enhancement at high order is quite considerable and very sensitive to the relative phase {delta}{phi}, thus offering not only a way to efficiently produce HHG but also a new method to measure the phase of intense high-frequency laser pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Higher Order Time Integration Schemes for the Unsteady Navier-Stokes Equations on Unstructured Meshes

The efficiency gains obtained using higher-order implicit Runge-Kutta schemes as compared with the second-order accurate backward difference schemes for the unsteady Navier-Stokes equations are investigated. Three different algorithms for solving the nonlinear system of equations arising at each timestep are presented. The first algorithm (NMG) is a pseudo-time-stepping scheme which employs a non-linear full approximation storage (FAS) agglomeration multigrid method to accelerate convergence. The other two algorithms are based on Inexact Newton's methods. The linear system arising at each Newton step is solved using iterative/Krylov techniques and left preconditioning is used to accelerate convergence of the linear solvers. One of the methods (LMG) uses Richardson's iterative scheme for solving the linear system at each Newton step while the other (PGMRES) uses the Generalized Minimal Residual method. Results demonstrating the relative superiority of these Newton's methods based schemes are presented. Efficiency gains as high as 10 are obtained by combining the higher-order time integration schemes with the more efficient nonlinear solvers.

Jothiprasad, Giridhar↗

Active learning of polarizable nanoparticle phase diagrams for the guided design of triggerable self-assembling superlattices

Polarizable nanoparticles are of interest in materials science because of their rich and complex phase behavior that can be used to engineer nanostructured materials with long-range crystalline order. To understand and rationally navigate the design space of polarizable nanoparticles for self-assembling highly ordered superlattices, we developed a coarse-grained computational model to describe the nanoparticle-nanoparticle interactions in implicit solvent and employ the computationally efficient image method to model many-body polarization interactions. We conducted high-throughput virtual screening over a five-dimensional particle design space spanned by temperature, particle size, particle charge, particle dielectric, and solvent dielectric using enhanced sampling molecular dynamics calculations within an active learning framework to efficiently map out the regions of thermodynamic stability of the self-assembled aggregates. We validate our predictions in comparisons against small angle x-ray scattering measurements of gold nanoparticles surface functionalized with metal chalcogenide ligands. Lastly, we use our validated phase maps to computationally design switchable nanostructured materials capable of triggered assembly and disassembly as a function of temperature and solvent dielectric with potential applications as sensors, smart windows, optoelectronic devices, and in medical diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles electronic structure in second-moment calculation of mode frequencies: Failure of quasiharmonic approximation in silicon

Using first-principles electronic structure calculations (local density approximation), we present second-moment calculations of the temperature dependence of the vibrational normal mode frequencies in Si up to 1500 K . The method is based on simple ensemble averages of displacements and forces and is easy to implement. These efficient calculations incorporate all interactions nonperturbatively, implicitly including all high order force constants, in contrast to typical perturbative approaches. Also in this work, we propose and apply to our classical calculations an estimated quantum correction that could be used for classical approaches other than the moments method. We compare our results to available experiments, including recent inelastic neutron scattering data and conclude that the second-moment gives the frequency shift to within a factor of 2 in contrast to quasiharmonic approaches that fail by an order of magnitude to predict the anharmonic shift. Noting the relative simplicity and speed of the calculations, we conclude that the second-moment approximation reasonably accounts for anharmonicity in a system that has been very closely studied experimentally and may reliably be applied in an exploratory way to more complex systems. Finally, we suggest that further improvement on the results could be obtained by incorporating the fourth moment, which can be implemented with little additional cost.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The p-version of the finite element method in incremental elasto-plastic analysis

Whereas the higher-order versions of the finite elements method (the p- and hp-version) are fairly well established as highly efficient methods for monitoring and controlling the discretization error in linear problems, little has been done to exploit their benefits in elasto-plastic structural analysis. Aspects of incremental elasto-plastic finite element analysis which are particularly amenable to improvements by the p-version is discussed. These theoretical considerations are supported by several numerical experiments. First, an example for which an analytical solution is available is studied. It is demonstrated that the p-version performs very well even in cycles of elasto-plastic loading and unloading, not only as compared to the traditional h-version but also in respect to the exact solution. Finally, an example of considerable practical importance - the analysis of a cold-worked lug - is presented which demonstrates how the modeling tools offered by higher-order finite element techniques can contribute to an improved approximation of practical problems.

Holzer, Stefan M.↗

An enhanced projection and assembly model reduction methodology

An enhanced projection and assembly (P and A) method employing static correction modes to either the retained mode set of the system or the projected mode sets of the components is presented. The effectiveness of the proposed technique was successfully demonstrated on a 13-DOF mass-spring model and a high-order finite element model of the Galileo spacecraft. When applied to the Galileo cruise model, the system-level augmented P and A method significantly alleviates the zero-mismatch problem found in previous studies.

Lee, Allan Y.↗

Low-energy high-brightness electron beam dynamics based on slice beam matrix method

Preserving the phase space quality has been of crucial importance to high-brightness electron beam transport. Any driving source of beam performance limitations in such a transport system must be carefully examined in order to preserve the beam phase space quality. It is found that in the low beam energy, high bunch charge regime, space charge effect on the charged particle beam evolution can be complicated. It may be insufficient to analyze the beam properties through the envelope or lower order moments for the mere bulk of the beam. In this work we will study the space-charge-dominated, low-energy, high-brightness electron beam dynamics based on the slice beam matrix method. The slice beam matrix method, extended from the existing bulk beam analysis, is applicable to an arbitrary longitudinal bunch distribution and can thus take the nonlinear RF curvature into account. The semi-analytical sliced beam space charge model is constructed and assumes an axisymmetric beam in the presence of perfect conducting cylindrical pipe with circular cross section. We present in this paper the theoretical formulation, starting from single-particle dynamics, space charge field calculation, followed by the moment description of a collection of particles, based on beam sigma matrix and longitudinal slice decomposition. We prove the equivalence between the beam matrix method and the envelope formalism in the presence of space charge effect, in both the transverse and longitudinal dimensions. Two examples are then demonstrated, one for a unit cell of superconducting radio-frequency (RF) cavity and the other for a 1.5-cell RF gun system. The semi-analytical results from beam matrix calculation are discussed and compared with particle tracking simulation using ASTRA. In conclusion, we expect that the analysis based on the slice beam matrix method shall serve as an efficient and advanced tool to further investigate the low-energy high-brightness electron beam dynamics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Solutions Are the Problem: Ordered Two-Dimensional Covalent Organic Framework Films by Chemical Vapor Deposition

Covalent organic frameworks (COFs) are a promising class of crystalline polymer networks that are useful due to their high porosity, versatile functionality, and tunable architecture. Conventional solution-based methods of producing COFs are marred by slow reactions that produce powders that are difficult to process into adaptable form factors for functional applications, and there is a need for facile and fast synthesis techniques for making crystalline and ordered covalent organic framework (COF) thin films. In this work, we report a chemical vapor deposition (CVD) approach utilizing co-evaporation of two monomers onto a heated substrate to produce highly crystalline, defect-free COF films and coatings with hydrazone, imine, and ketoenamine COF linkages. Further, this all-in-one synthesis technique produces highly crystalline, 40 nm–1 μm-thick COF films on Si/SiO2 substrates in less than 30 min. Crystallinity and alignment were proven by using a combination of grazing-incidence wide-angle X-ray scattering (GIWAXS) and transmission electron microscopy (TEM), and successful conversion of the monomers to produce the target COF was supported by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and UV–vis measurements. Additionally, we used atomic force microscopy (AFM) to investigate the growth mechanisms of these films, showing the coalescence of triangular crystallites into a smooth film. To show the wide applicability and scope of the CVD process, we also prepared crystalline ordered COF films with imine and ketoenamine linkages. These films show potential as high-quality size exclusion membranes, catalytic platforms, and organic transistors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulation calorimetry in diamond anvil cells. II. Joule-heating design and prototypes

Here, Part I shows that quantitative measurements of heat capacity are theoretically possible inside diamond anvil cells via high-frequency Joule heating (100 kHz–10 MHz), opening up the possibility of new methods to detect and characterize transformations at high-pressure such as the glass transitions, melting, magnetic orderings, and the onset of superconductivity. Here, we test the possibility outlined in Part I, using prototypes and detailed numerical models. First, a coupled electrical-thermal numerical model shows that specific heat of metals inside diamond cells can be measured directly using ~1 MHz frequency, with <10% accuracy. Second, we test physical models of high-pressure experiments, i.e., diamond-cell mock-ups. Metal foils of 2–6 μm-thickness are clamped between glass insulation inside diamond anvil cells. Fitting data from 10 Hz to ~30 kHz, we infer the specific heat capacities of Fe, Pt, and Ni with ±20%–30% accuracy. The electrical test equipment generates -80 dBc spurious harmonics, which overwhelm the thermally induced harmonics at higher frequencies, disallowing the high precision expected from numerical models. An alternative Joule-heating calorimetry experiment, on the other hand, does allow absolute measurements with < 10% accuracy, despite the -80 dBc spurious harmonics: the measurement of thermal effusivity, $ \sqrt{ρck}$ (ρ, c , and k being density, specific heat, and thermal conductivity), of the insulation surrounding a thin-film heater. Using a ~50 nm-thick Pt heater surrounded by glass and 10 Hz–300 kHz frequency, we measure thermal effusivity with ±6% accuracy inside the sample chamber of a diamond anvil cell.

42 ENGINEERING↗

Note: Efficient generation of optical sidebands at GHz with a high-power tapered amplifier

Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8–2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Collisional Cross-Sections with T-Wave Ion Mobility Spectrometry without Experimental Calibration

A method for relating traveling-wave ion mobility spectrometry (TWIMS) drift times with collisional cross-sections using computational simulations is presented. This method is developed using SIMION modeling of the TWIMS potential wave and equations that describe the velocity of ions in gases induced by electric fields. The accuracy of this method is assessed by comparing the collisional cross-sections of 70 different reference ions obtained using this method with those obtained from static drift tube ion mobility measurements. The cross-sections obtained here with low wave velocities are very similar to those obtained using static drift (average difference = 0.3%) for ions formed from both denaturing and buffered aqueous solutions. In contrast, the cross-sections obtained with high wave velocities are significantly greater, especially for ions formed from buffered aqueous solutions. These higher cross-sections at high wave velocities may result from high-order factors not accounted for in the model presented here or from the protein ions unfolding during TWIMS. Results from this study demonstrate that collisional cross-sections can be obtained from single TWIMS drift time measurements, but that low wave velocities and gentle instrument conditions should be used in order to minimize any uncertainties resulting from high-order effects not accounted for in the present model and from any protein unfolding that might occur. Thus, the method presented here eliminates the need to calibrate TWIMS drift times with collisional cross-sections measured using other ion mobility devices. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analytic Nonlinear Methods for Beam Optics

In recent years there have been major advances in the computation and use of high-order maps for the design, optimization and operation of beamlines. We will describe five practical examples for both linear and circular colliders. From least to most complex these examples will be: use of similarity transformations (FFTB design, SLC diagnosis); statistical maps (SSC smear and tune-shift); aberrations (SLC upgrade); resonance basis and nPB tracking (PEP-II design); and kick factorization (possibly LHC).

43 PARTICLE ACCELERATORS↗

Monte Carlo Second- and Third-Order Many-Body Green’s Function Methods with Frequency-Dependent, Nondiagonal Self-Energy

We fully develop the Monte Carlo many-body Green’s function (MC-GF) method with the following enhancements: (1) The truncation order of the perturbation expansion of the Dyson self-energy is raised from the second order (MC-GF2) to the third order (MC-GF3) with the aid of a computerized procedure to enumerate and transform all 84 third-order Goldstone diagrams into Monte Carlo integrable expressions and then into central processing unit (CPU)/graphical processing unit (GPU)-parallel computer codes. (2) An efficient algorithm is proposed that computes all off-diagonal and diagonal elements of the MC-GF2 and MC-GF3 self-energy matrices by common subexpression elimination. (3) The frequency-independent approximation is lifted by introducing a method that computes frequency derivatives of the MC-GF2 and MC-GF3 self-energies up to any arbitrarily high order at nearly no additional computational cost. (4) The imaginary-time integration in the Laplace-transformed expressions of the self-energy is carried out stochastically (instead of using a quadrature in the previous implementations), resulting in a 50- to 200-fold speedup. (5) The efficiency of the redundant-walker convergence acceleration scheme is analyzed numerically, and the guidelines are established to select an optimal number of walkers for maximal efficiency. When such an optimal number is used, the cost per sample is constant of molecular size on either many CPUs or many GPUs. (6) The computational cost to obtain a binding energy within a given statistical uncertainty is observed to increase as (tentatively) O(n 4 ) and O(n 5 ) of molecular size (n is the number of electrons) with and without the diagonal approximation, respectively, as opposed to O(n 5 ) and O(n 6 ) of the corresponding deterministic algorithms. With this method applied to the electron binding energies of C 60 , we show that the third-order corrections to the self-energies are much greater in electron binding energies than in ground-state energies. As a result, they display a sign of oscillatory convergence toward experimental results, not necessarily improving the agreement with increasing perturbation order, justifying MC-GF3 and motivating even higher-order methods.

Algorithms↗

Timing and Multi-Channel: Novel Method for Determining the Neutrino Mass Ordering from Supernovae

One of the few remaining unknowns in the standard three-flavor neutrino oscillation paradigm is the ordering of neutrino masses. In this work we propose a novel method for determining neutrino mass ordering using the time information on early supernova neutrino events. In a core-collapse supernova, neutrinos are produced earlier than antineutrinos and, depending on the mass ordering which affects the adiabatic flavor evolution, may cause earlier observable signals in $\nu_e$ detection channels than in others. Hence, the time differences are sensitive to the mass ordering. We find that using the time information on the detection of the first galactic supernova events at future detectors like DUNE, JUNO and Hyper-Kamiokande, the mass ordering can already be determined at 2$\sigma$ CL, while $\mathcal{O}(10)$ events suffice for the discovery. Our method does not require high-statistics and could be used within the supernova early warning system (SNEWS) which will have access to the time information on early supernova neutrino events recorded in a number of detectors. The method proposed in this paper also implies a crucial interplay between the mass ordering and the triangulation method for locating supernovae.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring 14 Elemental Abundances with R = 1800 LAMOST Spectra

The LAMOST survey has acquired low-resolution spectra (R = 1800) for 5 million stars across the Milky Way, far more than any current stellar survey at a corresponding or higher spectral resolution. It is often assumed that only very few elemental abundances can be measured from such low-resolution spectra, limiting their utility for Galactic archaeology studies. However, Ting et al. used ab initio models to argue that low-resolution spectra should enable precision measurements of many elemental abundances, at least in theory. Here, we verify this claim in practice by measuring the relative abundances of 14 elements from LAMOST spectra with a precision of ≲0.1 dex for objects with S/N{sub LAMOST}≳30 (per pixel). We employ a spectral modeling method in which a data-driven model is combined with priors that the model gradient spectra should resemble ab initio spectral models. This approach assures that the data-driven abundance determinations draw on physically sensible features in the spectrum in their predictions and do not just exploit astrophysical correlations among abundances. Our analysis is constrained to the number of elemental abundances measured in the APOGEE survey, which is the source of the training labels. Obtaining high quality/resolution spectra for a subset of LAMOST stars to measure more elemental abundances as training labels and then applying this method to the full LAMOST catalog will provide a sample with more than 20 elemental abundances, which is an order of magnitude larger than current high-resolution surveys, substantially increasing the sample size for Galactic archaeology.

79 ASTRONOMY AND ASTROPHYSICS↗

DYNAMIC SPECTRAL MAPPING OF INTERSTELLAR PLASMA LENSES

Compact radio sources sometimes exhibit intervals of large, rapid changes in their flux density, due to lensing by interstellar plasma crossing the line of sight. A novel survey program has made it possible to discover these “Extreme Scattering Events” (ESEs) in real time, resulting in a high-quality dynamic spectrum of an ESE observed in PKS 1939–315. Here we present a method for determining the column-density profile of a plasma lens, given only the dynamic radio spectrum of the lensed source, under the assumption that the lens is either axisymmetric or totally anisotropic. Our technique relies on the known, strong frequency dependence of the plasma refractive index in order to determine how points in the dynamic spectrum map to positions on the lens. We apply our method to high-frequency (4.2–10.8 GHz) data from the Australia Telescope Compact Array of the PKS 1939–315 ESE. The derived electron column-density profiles are very similar for the two geometries we consider, and both yield a good visual match to the data. However, the fit residuals are substantially above the noise level, and deficiencies are evident when we compare the predictions of our model to lower-frequency (1.6–3.1 GHz) data on the same ESE, thus motivating future development of more sophisticated inversion techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Spurious Behavior of Shock-Capturing Methods: Problems Containing Stiff Source Terms and Discontinuities

The goal of this paper is to relate numerical dissipations that are inherited in high order shock-capturing schemes with the onset of wrong propagation speed of discontinuities. For pointwise evaluation of the source term, previous studies indicated that the phenomenon of wrong propagation speed of discontinuities is connected with the smearing of the discontinuity caused by the discretization of the advection term. The smearing introduces a nonequilibrium state into the calculation. Thus as soon as a nonequilibrium value is introduced in this manner, the source term turns on and immediately restores equilibrium, while at the same time shifting the discontinuity to a cell boundary. The present study is to show that the degree of wrong propagation speed of discontinuities is highly dependent on the accuracy of the numerical method. The manner in which the smearing of discontinuities is contained by the numerical method and the overall amount of numerical dissipation being employed play major roles. Moreover, employing finite time steps and grid spacings that are below the standard Courant-Friedrich-Levy (CFL) limit on shockcapturing methods for compressible Euler and Navier-Stokes equations containing stiff reacting source terms and discontinuities reveals surprising counter-intuitive results. Unlike non-reacting flows, for stiff reactions with discontinuities, employing a time step and grid spacing that are below the CFL limit (based on the homogeneous part or non-reacting part of the governing equations) does not guarantee a correct solution of the chosen governing equations. Instead, depending on the numerical method, time step and grid spacing, the numerical simulation may lead to (a) the correct solution (within the truncation error of the scheme), (b) a divergent solution, (c) a wrong propagation speed of discontinuities solution or (d) other spurious solutions that are solutions of the discretized counterparts but are not solutions of the governing equations. The present investigation for three very different stiff system cases confirms some of the findings of Lafon & Yee (1996) and LeVeque & Yee (1990) for a model scalar PDE. The findings might shed some light on the reported difficulties in numerical combustion and problems with stiff nonlinear (homogeneous) source terms and discontinuities in general.

Yee, Helen M. C.↗

DNS of Flow in a Low-Pressure Turbine Cascade Using a Discontinuous-Galerkin Spectral-Element Method

A new computational capability under development for accurate and efficient high-fidelity direct numerical simulation (DNS) and large eddy simulation (LES) of turbomachinery is described. This capability is based on an entropy-stable Discontinuous-Galerkin spectral-element approach that extends to arbitrarily high orders of spatial and temporal accuracy and is implemented in a computationally efficient manner on a modern high performance computer architecture. A validation study using this method to perform DNS of flow in a low-pressure turbine airfoil cascade are presented. Preliminary results indicate that the method captures the main features of the flow. Discrepancies between the predicted results and the experiments are likely due to the effects of freestream turbulence not being included in the simulation and will be addressed in the final paper.

Low-Pressure Turbine Cascade↗