Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTEREST GROUPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Bis-, tris-, and tetrakis-N-(2-nitroxyethyl) derivatives of 1,1’-[methylenebis(oxy)]bis(triaz-1-ene 2-oxides)

Synthesis of new potential NO donors in living organisms, 1,1’-[methylenebis(oxy)]bis(triaz- 1-ene 2-oxides) bearing from two to four 2-nitroxyethyl groups at the nitrogen atoms was accomplished. The developed synthetic approaches involves either nucleophilic substitution of the bromine atoms of the corresponding N-2-bromoethyl derivatives of 1,1’-[methylenebis(oxy)]-bis(triaz-1-ene 2-oxides) or nitration of its 2-hydroxyethyl analogs. Some of the synthesized compounds are of interest as promising energetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Multi-hydrophilic functional network enables porous membranes excellent anti-fouling performance for highly efficient water remediation

Membrane technology is believed as a cost-effective approach for solving the water issues, where as it suffers from serious membrane fouling. Surface grafting and surface coating have been proved to be effective in abating the membrane fouling; however, these processes always need additional procedures and compromise the initial permeance of the membranes. Herein, we developed a kind of highly permeable polyacrylonitrile (PAN) membranes with excellent anti-fouling performance through one-step phase inversion of the PAN casting solution containing water-soluble active additives. During the process, the water-soluble active additives could segregate towards the membrane surface and pore walls; thereby finely tailoring the pore structures of the PAN-based membranes. Moreover, the active additives could react with each other to form crosslinked networks containing multi-hydrophilic functional groups including CH2-O-CH2, -OH or-Si-OH. Consequently, the PAN-based membranes exhibited surprising superhydrophilicity with water contact angle below 10. even after soaking in water for one week and the anti-fouling permeance of the membranes increased significantly with permeance recovery rate above 93%. Interestingly, the modified membranes also demonstrated both high permeances and high separation efficiency, thereby showing strong promise in water environmental remediation including wastewater treatment and oil/water emulsion separation.

Anti-fouling↗
DOE OSTI2023

Achieving High Permittivity Paraelectric Behavior in Mesogen-Free Sulfonylated Chiral Polyethers with Smectic C Liquid Crystalline Self-Assembly

Ferroelectric liquid crystalline polymers (LCPs) with a high spontaneous polarization (P s ) are of great interest for the fabrication of advanced electronic devices. However, conventional ferroelectric LCPs typically exhibit low spontaneous polarization, only around 1 mC/m 2 . To increase the orientational polarization for ferroelectric LCPs, in this work, we designed mesogen-free comb-shaped LCPs based on isotactic polyepichlorohydrin, which contained highly dipolar sulfonyl groups (dipole moment of 4.5 Debye) in the side chains. The goal was to increase dipole density and induce ferroelectric switching. In this new series of mesogen-free LCPs, the sulfonyl groups were first moved away from the main chain to mitigate strong dipole–dipole interactions. Second, methyl-branched alkyl side chains were implemented to decrease the crystallizability and induce the Smectic C (SmC) self-assembly. Intriguingly, these SmC samples, for the first time, exhibited typical paraelectric behavior (i.e., slim S-shaped single hysteresis loops) with a high dielectric constant in the range of 20–30. Finally, learning from the knowledge obtained from this study, we will be able to design new mesogen-free LCPs with tailor-made dipole–dipole interactions and realize ferroelectricity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible redox chemistry in azobenzene-based organic molecules for high-capacity and long-life nonaqueous redox flow batteries

Redox flow batteries (RFBs), often categorized as aqueous and nonaqueous systems, represent a type of large-scale energy storage technology for renewable energy resources. Redox-active organic molecules have recently drawn extensive interests in RFBs as promising active materials due to their elemental abundance, structural diversity and high tunability of properties, but employing organic molecules in nonaqueous systems is far limited in terms of useable capacity and cycling stability. Here we introduce a class of azobenzene-based organic compounds with the azo group as redox-active center in the p-conjugated structure as new active materials to realize high-performance nonaqueous RFBs with long cycling life and high capacity. By screening suitable organic solvents with high solubility and conductivity, the azobenzene organic molecule was capable to achieve a stable long cycling with a low capacity decay of 0.014% per cycle and 0.16% per day over 1000 cycles. And the stable cycling of electrolytes under a high concentration of 1 M was also realized, delivering a high reversible capacity of ~46 Ah L -1 . The unique lithium-coupled redox chemistry accompanied with a voltage increase was observed and revealed by experimental characterization and theoretical simulation. With the reversible two-electron redox activity of azo group in p-conjugated structures, azobenzene as an azo-aromatic molecule represents a class of promising redox-active organics for potential grid-scale energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2019

Surface Erosion of Plasma-Facing Materials Using an Electrothermal Plasma Source and Ion Beam Micro-Trenches

Erosion characteristics of tungsten-alternative plasma-facing materials (PFMs) were tested under high heat flux conditions in the electrothermal plasma source facility at Oak Ridge National Laboratory. The PFMs of interest are high-purity β-3C chemical vapor deposition silicon carbide (SiC) and the MAX phases Ti 3 SiC 2 and Ti 2 AlC [MAX = chemical formula M n+1 AX n , where M is an early transition metal (such as Ti or Ta), A is an A-group element (such as Si or Al), and X is carbon or nitrogen]. Additionally, an erosion analysis method was developed using a combination of focused ion beam microscopy and scanning electron microscopy, carving micro-trench geometries into polished sample surfaces. Samples of SiC, Ti 3 SiC 2 , and Ti 2 AlC were exposed to the electrothermal plasma source alongside tungsten and monocrystalline silicon. Samples were exposed to a Lexan polycarbonate (C 16 H 14 O 3 ) electrothermal plasma stream in a He environment, at a specified impact angle, with infrared camera diagnostics. Edge localized mode–relevant heat fluxes of 0.9 to 1 GW/m 2 over 1-ms discharges were generated on the target surfaces. Tungsten samples exhibited pronounced melt-layer formation and deformation, with measured molten pits 2 to 10 μm in diameter and melt-layer depths of up to 7 μm deep. Surface erosion rates for Ti 3 SiC 2 and Ti 2 AlC ranged from 80 to 775 μm/s and 85 to 470 μm/s, respectively. Both MAX phases exhibited extreme surface fracture and material ejection, with damage depths past 4 μm for Ti 2 AlC and 11 μm for Ti 3 SiC 2 . Lastly, SiC displayed the best performance, in one case surviving 15 consecutive electrothermal plasma exposures with an average erosion rate of about 29 μm/s and no surface fracturing. SiC erosion rates ranged from 23 to 128 μm/s.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Toward a classification of PT-symmetric quantum systems: From dissipative dynamics to topology and wormholes

Studies of many-body non-Hermitian parity-time (PT)-symmetric quantum systems are attracting a lot of interest due to their relevance in research areas ranging from quantum optics and continuously monitored dynamics to Euclidean wormholes in quantum gravity and dissipative quantum chaos. While a symmetry classification of non-Hermitian systems leads to 38 universality classes, we show that, under certain conditions, PT-symmetric systems are grouped into 24 universality classes. We identify 14 of them in a coupled two-site Sachdev-Ye-Kitaev (SYK) model and confirm the classification by spectral analysis using exact diagonalization techniques. Intriguingly, in 4 of these 14 universality classes, AIII ν , BDI ν † , BDI + + ν , and CI − − ν , we identify a basis in which the SYK Hamiltonian has a block structure in which some blocks are rectangular, with ν ∈ N the difference between the number of rows and columns. We show analytically that this feature leads to the existence of ν robust purely eigenvalues, whose level statistics follow the predictions of Hermitian random matrix theory for classes A, AI, BDI, and CI, respectively. We have recently found that this ν is a topological invariant, so these classes are topological. By contrast, nontopological real eigenvalues display a crossover between Hermitian and non-Hermitian level statistics. Similarly to the case of Lindbladian dynamics, the reduction of universality classes leads to unexpected results, such as the absence of Kramers degeneracy in a given sector of the theory. Another novel feature of the classification scheme is that different sectors of the PT-symmetric Hamiltonian may have different symmetries. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2015

TU-CD-207-03: Time Evolution of Texture Parameters of Subtracted Images Obtained by Contrast-Enhanced Digital Mammography (CEDM)

Purpose: To evaluate the time evolution of texture parameters, based on the gray level co-occurrence matrix (GLCM), in subtracted images of 17 patients (10 malignant and 7 benign) subjected to contrast-enhanced digital mammography (CEDM). The goal is to determine the sensitivity of texture to iodine uptake at the lesion, and its correlation (or lack of) with mean-pixel-value (MPV). Methods: Acquisition of clinical images followed a single-energy CEDM protocol using Rh/Rh/48 kV plus external 0.5 cm Al from a Senographe DS unit. Prior to the iodine-based contrast medium (CM) administration a mask image was acquired; four CM images were obtained 1, 2, 3, and 5 minutes after CM injection. Temporal series were obtained by logarithmic subtraction of registered CM minus mask images.Regions of interest (ROI) for the lesion were drawn by a radiologist and the texture was analyzed. GLCM was evaluated at a 3 pixel distance, 0° angle, and 64 gray-levels. Pixels identified as registration errors were excluded from the computation. 17 texture parameters were chosen, classified according to similarity into 7 groups, and analyzed. Results: In all cases the texture parameters within a group have similar dynamic behavior. Two texture groups (associated to cluster and sum mean) show a strong correlation with MPV; their average correlation coefficient (ACC) is r{sup 2}=0.90. Other two groups (contrast, homogeneity) remain constant with time, that is, a low-sensitivity to CM uptake. Three groups (regularity, lacunarity and diagonal moment) are sensitive to CM uptake but less correlated with MPV; their ACC is r{sup 2}=0.78. Conclusion: This analysis has shown that, at least groups associated to regularity, lacunarity and diagonal moment offer dynamical information additional to the mean pixel value due to the presence of CM at the lesion. The next step will be the analysis in terms of the lesion pathology. Authors thank PAPIIT-IN105813 for support. Consejo Nacional de Ciencia Y Tecnologia, PAPIIT-IN105813.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Photoinhibition of comammox reaction in Nitrospira inopinata in a dose- and wavelength-dependent manner

Apparent contribution of complete ammonia-oxidizing organisms (comammox) to the global nitrogen cycle highlights the necessity for understanding niche differentiation of comammox bacteria among other ammonia oxidizers. While the high affinity for ammonia of the comammox species Nitrospira inopinata suggests their niche partitioning is expected to be centered in oligotrophic environments, their absence in nutrient-depleted environments (such as the oceans) suggests that other (abiotic) factors might control their distribution and spatial localization within microbial communities. Many ammonia- and nitrite-oxidizing organisms are sensitive to light; however, the photosensitivity of comammox has not been explored. Since comammox bacteria encode enzymatic machinery homologous to canonical ammonia-and nitrite-oxidizers, we hypothesized that comammox N. inopinata, the only available pure culture of this group of microorganisms, may be inhibited by illumination in a similar manner. We evaluated the impact of light intensity, wavelength, and duration on the degree of photoinhibition for cultures of the comammox species N. inopinata and the soil ammonia-oxidizing archaea Nitrososphaera viennensis. Both species were highly sensitive to light. Interestingly, mimicking diurnal light exposure caused an uncoupling of ammonia and nitrite oxidation in N. inopinata, indicating nitrite oxidation might be more sensitive to light exposure than ammonia oxidation. It is likely that light influences comammox spatial distribution in natural environments such as surface fresh waters according to diurnal cycles, light attenuation coefficients, and the light penetration depths. Our findings therefore provide ecophysiological insights for further studies on comammox both in field and laboratory settings.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Giant Outer Transiting Exoplanet Mass (GOT ‘EM) Survey. I. Confirmation of an Eccentric, Cool Jupiter with an Interior Earth-sized Planet Orbiting Kepler-1514

Despite the severe bias of the transit method of exoplanet discovery toward short orbital periods, a modest sample of transiting exoplanets with orbital periods greater than 100 days is known. Long-term radial velocity (RV) surveys are pivotal to confirming these signals and generating a set of planetary masses and densities for planets receiving moderate to low irradiation from their host stars. Here we conduct RV observations of Kepler-1514 from the Keck I telescope using the High Resolution Echelle Spectrometer. From these data, we measure the mass of the statistically validated giant (1.108 ± 0.023 R {sub J}) exoplanet Kepler-1514 b with a 218-day orbital period as 5.28 ± 0.22 M {sub J}. The bulk density of this cool (∼390 K) giant planet is 4.82{sub −0.25}{sup +0.26}g cm{sup −3}, consistent with a core supported by electron degeneracy pressure. We also infer an orbital eccentricity of 0.401{sub −0.014}{sup +0.013} from the RV and transit observations, which is consistent with planet–planet scattering and disk cavity migration models. The Kepler-1514 system contains an Earth-size, Kepler Object of Interest on a 10.5-day orbit that we statistically validate against false-positive scenarios, including those involving a neighboring star. The combination of the brightness (V = 11.8) of the host star and the long period, low irradiation, and high density of Kepler-1514 b places this system among a rare group of known exoplanetary systems and as one that is amenable to continued study.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1990

Effects of antimony substitution on bismuth based superconductors

The effect of Sb substitution and simultaneous substitution of Pb and Sb on the superconducting transition temperatures in the BiSrCaCuO system is investigated. The 2:2:2:3 phase is of particular interest since any small increase in the transition temperature could be of great interest. More that 90 different samples were prepared based on 2:2:2:3 stoichiometry in the BiSrCaCuO system. After this preliminary attempt, four different families of samples were investigated. In the first family of samples, Bi was substituted by Sb to form Bi(1.9)Sb(0.1)Sr2Ca2Cu3O(y). The second group of samples were prepared by simultaneous addition of Pb and Sb with nominal composition Bi(1.8)Pb(0.1)Sb(0.1)Sr2Ca2Cu3O(y). The third and fourth groups were prepared to determine the effect created when the Pb concentration is increased with the nominal compositions being Bi(1.7)Pb(0.1)Sr2Ca2Cu3O(y) and Bi(1.6)Sb(0.1)Sr2Ca2Cu3O(y). The results of these investigations are presented with a discussion.

Barrientos, Alfonso↗
NASA NTRS1994

Aerospace Industries Association (AIA) work practices report for composites

In an effort to gain a better understanding of effective safety and health work practice controls for composite manufacturing operations, the Aerospace Industries Association (AIA) Occupational Safety and Health Committee established a Composites Task Group. The group's task was to provide AIA members with recommendations for minimizing occupational exposure risk and to determine research needs and information gaps. The strategy included a review of toxicological information on composites, a review of member company experience and control methods, and interaction with other professional organizations who share an interest in composite work practices.

Luca, Jackie↗
NASA NTRS2010

The Spatial Distribution and Mineralogical Association of Organics in the Tagish Lake and Bells Carbonaceous Chondrites

Chondritic meteorites represent some of the most primitive Solar System materials available for laboratory analysis. While the presence of simple organic molecules has been well documented in such materials [1], little is known about their spatial distribution and to what extent, if any, they exhibit specific mineralogical associations. This dichotomy arises since organic analysis typically involves solvent extraction as a preliminary step. To address these issues we have used two-step laser mass spectrometry (L 2MS) to map in situ the spatial distribution of aromatic and conjugated organics at the micron scale in freshly exposed surfaces of the Tagish Lake and Bells carbonaceous chondrites. Our specific goals are two-fold; firstly to investigate if and how abundance of organic species varies within the meteorite matrix both as an ensemble, and with respect to functional group (e.g., R-OH vs. RCH3) and between members of the same homologous series (e.g., R-H vs. R-(CH2)H). Secondly, to determine whether observed spatial variations can be related to specific mineralogical and/or physical characteristics of the host matrix. In regard to the latter we are particularly interested in the role that carbonaceous nanoglobules [2] play as reservoirs of organic matter. Such globules, which are believed to have formed by photochemical processing of organic-rich ices in the presolar cold molecular cloud or the outermost reaches of the early protosolar disk, are abundant in both the Bells and Tagish Lake chondrites and are noteworthy for having particularly high enrichments in 2H and 15N [3,4].

Clemett, S. J.↗
DOE OSTI2017

Benchmark Evaluation of Dounreay Prototype Fast Reactor Minor Actinide Depletion Measurements

Historic measurements of actinide samples in the Dounreay Prototype Fast Reactor (PFR) are of interest for modern nuclear data and simulation validation. Samples of various higher-actinide isotopes were irradiated for 492 effective full-power days and radiochemically assayed at Oak Ridge National Laboratory (ORNL) and Japan Atomic Energy Research Institute (JAERI). Limited data were available regarding the PFR irradiation; a six-group neutron spectra was available with some power history data to support a burnup depletion analysis validation study. Under the guidance of the Organisation for Economic Co-Operation and Development Nuclear Energy Agency (OECD NEA), the International Reactor Physics Experiment Evaluation Project (IRPhEP) and Spent Fuel Isotopic Composition (SFCOMPO) Project are collaborating to recover all measurement data pertaining to these measurements, including collaboration with the United Kingdom to obtain pertinent reactor physics design and operational history data. These activities will produce internationally peer-reviewed benchmark data to support validation of minor actinide cross section data and modern neutronic simulation of fast reactors with accompanying fuel cycle activities such as transportation, recycling, storage, and criticality safety.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Statistical Techniques For Real-time Anomaly Detection Using Spark Over Multi-source VMware Performance Data

Anomaly detection refers to the identi cation of an irregular or unusual pat- tern which deviates from what is standard, normal, or expected. Such deviated patterns typically correspond to samples of interest and are assigned different labels in different domains, such as outliers, anomalies, exceptions, or malware. Detecting anomalies in fast, voluminous streams of data is a formidable chal- lenge. This paper presents a novel, generic, real-time distributed anomaly detection framework for heterogeneous streaming data where anomalies appear as a group. We have developed a distributed statistical approach to build a model and later use it to detect anomaly. As a case study, we investigate group anomaly de- tection for a VMware-based cloud data center, which maintains a large number of virtual machines (VMs). We have built our framework using Apache Spark to get higher throughput and lower data processing time on streaming data. We have developed a window-based statistical anomaly detection technique to detect anomalies that appear sporadically. We then relaxed this constraint with higher accuracy by implementing a cluster-based technique to detect sporadic and continuous anomalies. We conclude that our cluster-based technique out- performs other statistical techniques with higher accuracy and lower processing time.

Apache Spark↗
DOE OSTI2019

Synthesis and Characterization of a Molecularly Designed High-Performance Organodisulfide as Cathode Material for Lithium Batteries

An innovative organodisulfide compound, 2,3,4,6,8,9,10,12–Octathia biscyclopenta[b,c]–5,11–anthraquinone–1,7–dithione (TPQD), has been successfully designed, synthesized, and characterized as a cathode material for lithium batteries. A benzoquinone is introduced to coordinate with dithiolane through 1,4–dithianes. The molecular structure, electrochemical performances, and the lithiation/delithiation mechanism of the TPQD cathode have been systematically investigated. TPQD can deliver an initial capacity of 251.7 mAh g -1 at a rate of C/10, which corresponds to the transfer of 4.7 electrons per formula. Highly reversible capacities and stable cyclic performances can be achieved at rates from C/10 to 5 C. Very interestingly, TPQD can retain a capacity of 120 mAh g -1 after 200 cycles at the 5 C rate, which is quite impressive for organodisulfide compounds. X–ray absorption spectroscopy measurements and density functional theory calculation results suggest that such a high capacity is contributed by both O redox of the quinone group and the cleavage and recombination of the disulfide bond. Moreover, the extended π–conjugation structure of the material, introduced by benzoquinone and dithiane, is beneficial for improving the high rate capability and cyclic stability. Furthermore this study illustrates an innovative approach in designing new organodisulfide compounds with improved cyclability and rate capability as cathode materials for high performance lithium batteries.

25 ENERGY STORAGE↗
DOE OSTI2015

Great reduction of loss at high electric field in the polyvinylidene fluoride/aromatic polythiourea blend films along with an irreversible phase transition

In this paper, the polarization response of dielectric blend based on the polyvinylidene fluoride (PVDF) and aromatic polythiourea (ArPTU) was investigated. It is found that the conduction loss at high field has been reduced 2–4 times along with an interesting irreversible transition under high electric field. The loss at 700 MV/m can be kept below 20%, which is better than most other polar dielectric polymers. It is proved that the transition is a phase change from glass phase to polar β phase at a critical field. And the highly polar thiourea groups of ArPTU can act as traps for the electrons, reduce conduction loss greatly and prevent dielectric breakdown by stabilizing the electron energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Developing a Process for Collaboration-Based Siting of a Federal Consolidated Interim Storage Facility in the United States: Learning from Communities Living with Legacy Waste

In June of 2023, the U.S. Department of Energy (DOE), Office of Nuclear Energy (NE) announced the selection of its Collaboration-Based Siting (CBS) Consortia, a group of 12 awardees, including the Consortium for Risk Evaluation with Stakeholder Participation (CRESP) (led by Vanderbilt University) to assist DOE-NE with the development of its process for siting a federal consolidated interim storage facility (FCISF) for spent nuclear fuel (SNF) storage. At this time, DOE NE is not soliciting interested host communities, rather the CBS Consortia are tasked with in-depth engagement, mutual learning, and capacity building to provide DOE NE with feedback on the CBS process. CRESP’s objective is to engage communities in two regions (the Pacific Northwest and the Southeast) with sites currently storing defense- and research-related SNF to foster learning concerning the best and worst practices in community participation in risk-informed decision making. This includes learning from existing structures for public input in radioactive waste management decision making [e.g. citizen advisory boards (CABs)] and other local parties about how to build and sustain trust among the parties. CRESP has been working to engage stakeholders and Tribes surrounding two DOE sites historically differing in receptiveness to engaging with DOE and trusting in DOE to accomplish its missions. CRESP’s approach to date has consisted of (1) engaging voluntarily members and former members of the DOE Office of Environmental Management’s CABs to develop a mutual understanding of their perspectives, values, and experiences related to risk and participatory decision making; (2) engaging members of those communities that would likely be part of any radioactive waste management discussions and who may provide valuable feedback for the development of the CBS process; and in the longer term, (3) engaging communities to foster knowledge sharing on understanding and definitions of risk and how risk is factored into community decision making. Our emphasis is to identify opportunities for improving risk communication frameworks, strategies, and decision making. The selection of a future FCISF site is likely to result in the creation of a structure similar to a CAB composed of members of the local community. We anticipate that these insights can help DOE NE learn from existing participatory risk communication structures in place at sites storing defenseor research-related SNF to understand best practices for fostering enduring and participatory relationships with future CABs. Within this paper, we (1) describe CRESP’s overall approach to assisting DOE NE with maturing the CBS process; (2) present a summary of preliminary phase 1 project results, including the development of a body of knowledge (describing available resources to support community engagement, risk communica tion, and participatory decision making) and community ecosystem information (leveraging demographic, social, economic, and environmental attribute mapping and advanced sentiment analysis of social media data); and (3) based on these results, provide observations for future research opportunities to support the development of CBS processes for radioactive waste management facilities, generally.

collaboration-based siting↗
NASA NTRS2004

Overview of NASA's Earth Science Data Systems

For over the last 15 years, NASA's Earth Science Enterprise (ESE) has devoted a tremendous effort to design and build the Earth Observing System (EOS) Data and Information System (EOSDIS) to acquire, process, archive and distribute the data of the EOS series of satellites and other ESE missions and field programs. The development of EOSDIS began with an early prototype to support NASA data from heritage missions and progressed through a formal development process to today's system that supports the data from multiple missions including Landsat 7, Terra, Aqua, SORCE and ICESat. The system is deployed at multiple Distributed Active Archive Centers (DAACs) and its current holdings are approximately 4.5 petabytes. The current set of unique users requesting EOS data and information products exceeds 2 million. While EOSDIS has been the centerpiece of NASA's Earth Science Data Systems, other initiatives have augmented the services of EOSDIS and have impacted its evolution and the future directions of data systems within the ESE. ESDIS had an active prototyping effort and has continued to be involved in the activities of the Earth Science Technology Office (ESTO). In response to concerns from the science community that EOSDIS was too large and monolithic, the ESE initiated the Earth Science Information Partners (ESP) Federation Experiment that funded a series of projects to develop specialized products and services to support Earth science research and applications. Last year, the enterprise made 41 awards to successful proposals to the Research, Education and Applications Solutions Network (REASON) Cooperative Agreement Notice to continue and extend the ESP activity. The ESE has also sponsored a formulation activity called the Strategy for the Evolution of ESE Data Systems (SEEDS) to develop approaches and decision support processes for the management of the collection of data system and service providers of the enterprise. Throughout the development of its earth science data systems, NASA has had an active collaboration with a number of interagency and international partners. One of the mechanisms that has been extremely helpful in initiating and promoting this collaboration has been NASA's participation in the Committee on Earth Observation Satellites (CEOS) and its Working Group on Information Systems and Services (WGISS). The CEOS members, working together, have implemented an International Directory Network that enables users to locate collections of earth science data held by the international community and an International Catalog System to search and order specific data products. CEOS WGISS has also promoted the international interest in the Open GIS Consortium s specifications that further advance the access and use of geospatial data and the interoperation of GTS components. These are just a few highlights of the benefits that member agencies gain from CEOS participation.

McDonald, Kenneth↗