Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Effect of oxidation and annealing on tunnel barrier structure and composition in IrMn/CoFe/TiO{sub x}/CoFe magnetic tunnel junctions

The effects of oxidation time and annealing conditions on sputter-deposited magnetic tunnel junctions with a TiO{sub x} barrier have been investigated. High resolution electron microscopy showed that longer oxidation times led to a significant increase in barrier layer width and to the formation of large volumes of oxides of Co and Fe. Annealing promoted extensive diffusion of Mn to the barrier region and the oxidation of Mn to MnO{sub x} concurrent with the reduction in oxides of Co and Fe. Annealing also increased the peak oxygen content of the barrier region and resulted in a distinct asymmetry in the barrier oxide structure.

36 MATERIALS SCIENCE↗

Alkali Metal Induced Two Dimensional Electron Systems at Cleaved Surfaces of InAs

The authors have performed low-temperature in-plane magnetotransport measurements on two-dimensional electron systems induced by deposition of Cs or Na at in situ cleaved surfaces of p-type InAs. The coverage dependence of the surface electron density N{sub s} strongly supports a simple model based on a surface donor level lying above the conduction band minimum. The maximum Fermi level positions obtained from the saturation values of N{sub s} are compared to those of previous photoelectron spectroscopy measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Finite element model-simulation-based characterization of a magnetostrictive gyrosensor

This paper analyzes a prototype microgyrosensor that employs the magnetostrictive alloy Galfenol for transduction of Coriolis-induced forces into an electrical output for quantifying a given angular velocity. The magnetic induction distribution in the Galfenol sensor patch depends on its bending shape and magnetoelastic properties and is investigated using a finite element model. Fluctuations in magnetic induction caused by a sinusoidal rotation of the sensor produce an amplitude modulated voltage in a surrounding coil which is simulated and measured.

36 MATERIALS SCIENCE↗

Vacancy defect and carrier distributions in the high mobility electron gas formed at ion-irradiated SrTiO{sub 3} surfaces

Using a combination of advanced characterization tools (positron annihilation spectroscopy, conductive-tip atomic force microscopy, and high-field magnetotransport), we have studied the extension, origin and properties of the high mobility electron gas (HMEG) generated by etching the SrTiO{sub 3} surfaces with Ar{sup +} ions. Contrary to previous assumptions, we show that this HMEG is not confined to nanometric thickness but extends to a few micrometer from the surface. We discuss this unanticipated large spatial extension in terms of the striking large diffusion of oxygen vacancy-related defects.

36 MATERIALS SCIENCE↗

Boron diffusion in magnetic tunnel junctions with MgO (001) barriers and CoFeB electrodes

Boron diffusion out of the CoFeB layers in model systems with thick CoFeB and MgO layers grown by radiofrequency sputtering or electron-beam evaporation and in MgO-based magnetic tunnel junctions (MTJs) is probed after annealing by x-ray photoemission spectroscopy (XPS) and electron energy loss spectroscopy. Successive interfaces are exposed by ion milling the stacks, layer by layer, in the XPS system. Despite the presence of thick CoFeB and a high annealing temperature of 400 deg. C, we found no boron in the MgO or at the MgO/CoFe interfaces. Similar results are also obtained in the MTJs.

36 MATERIALS SCIENCE↗

Magnetic Behaviour of Fe Substituted Bilayered Manganite La{sub 1.2}Sr{sub 1.5}Ca{sub 0.3}Mn{sub 2}O{sub 7}

For studying the effect of low level substitution of Fe (at Mn site) on magnetic behaviour in the bilayered system La{sub 1.2}Sr{sub 1.5}Ca{sub 0.3}Mn{sub 2}O{sub 7}, dc magnetization measurements have been made on La{sub 1.2}Sr{sub 1.5}Ca{sub 0.3}Mn{sub 1.99}Fe{sub 0.01}O{sub 7}. Cooling from 300 K downwards, the system shows transition to ferromagnetic (FM) ordering in ab plane (at {approx}250 K), to antiferromagnetic state (at {approx}195 K) and to 3D FM order (at {approx}70 K). Magnetization--temperature measurements in zero field cooling and field cooling modes, made under different external magnetic fields, and the observed long time evolution of magnetization with time, are suggestive of FM disorder and high magnetic anisotropy. Substitution of Fe weakens ferromagnetism.

36 MATERIALS SCIENCE↗

Colossal Electroresistive Properties Of CSD Grown Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} Films For Nonvolatile Memory Applications

Colossal electroresistance effects upon application of electric field in perovskite oxide Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}(PCMO) thin films, which is a promising candidate for resistance random access memory (RRAM) device have been investigated. Nanocrystalline PCMO films were grown on SiO{sub 2} substrates by chemical solution deposition and crystallized at 700 deg. C under different gas atmospheres. Four terminal current voltage characteristics of Ag/PCMO/Ag planar geometry exhibited a sharp transition from a low resistance state (LRS) to a high resistance state (HRS) with a resistance switching ratio of as high as 1100% at room temperature. Nonvolatility and high retention was confirmed by electric pulse induced resistive switching measurements. The resistance switching ratios were found to depend on the annealing conditions, suggesting an interaction between the nonlattice oxygen and oxygen vacancies and/or the cationic vacancy.

36 MATERIALS SCIENCE↗

Acceleration of ordering transformation of a new Fe{sub 2}(Mn,Cr)Si Heusler-alloy film by very high frequency plasma irradiation process during radio frequency sputter deposition

A new Heusler alloy, Fe{sub 2}(Mn,Cr)Si, that is likely to have high spin polarization (P) and high damping constant ({alpha}) was proposed to obtain high magneto-resistance ratio and low spin torque noise in a magnetic read head with a current-perpendicular-to-plane (CPP) giant magneto-resistance (GMR) multilayer. A very high frequency (VHF) plasma irradiation process during radio frequency (RF) sputter deposition was investigated to form the highly ordered structure of the Heusler alloy film with low thermal treatment temperature. The main results are as follows: (1) P and magnetic moment of Fe{sub 2}(Mn{sub 0.5}Cr{sub 0.5})Si with an L2{sub 1} structure were estimated at 0.99 and 2.49 {mu}{sub B}/f.u., respectively, and {alpha} was also estimated to be larger compared with the case of Co{sub 2}MnSi, according to density of states (DOS) calculations. (2) The ordering (at least B2 structure) temperature of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film decreased from 500 to 300 deg. C by using the VHF plasma irradiation process with optimized condition. (3) The surface roughness of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film also reduced from 1.7 to 0.5 nm by using the VHF plasma irradiation process. It is found that the Fe{sub 2}(Mn,Cr)Si Heusler alloy and the VHF plasma irradiation process with optimized condition seems to be applicable for fabrication of high-performance magnetic read head with CPP-GMR device.

36 MATERIALS SCIENCE↗

Pr{sub 0.67}Ba{sub 0.33}MnO{sub 3} in Bulk and Thin Film Ceramic

Bulk polycrystalline of Pr{sub 0.67}Ba{sub 0.33}MnO{sub 3}(PBMO) ceramic prepared via solid-state reaction and converted into thin films on corning glass, fused silica and MgO (100) by pulsed laser deposition (PLD) technique. As compared to bulk PBMO, the unit cell in thin film PBMO experienced positive misfit due to lattice strain induced by substrate used resulting MnO{sub 6} to deform (change in Mn-O-Mn bond angle and Mn-O bond length). Bulk PBMO had large grains ({approx}1.5{mu}m) as compared to thin film which are nano-sized (<100 nm). Two metal-insulator transition temperatures, T{sub P}(156 K and 190 K) were observed in bulk due to core-shell effect as proposed by Zhang et al.. In summary, variation of electrical behaviour was observed between bulk and thin film samples which believed to be due to the difference of ordering in core (body) and grain surface.

36 MATERIALS SCIENCE↗

Exploring the eddy current excitation invariance to infer about defect characteristics

This paper explores the excitation probe excitation field invariance when the eddy current method is applied to detect, localize and characterize material defects in conductive nonmagnetic media. The cases relative to rotational symmetry in circular solenoidal probes and translation symmetry in constant field probes are presented. The experimental data shows that this theoretical treatment is useful to preview the behavior of these probes.

42 ENGINEERING↗

Isotropic Hall effect and ''freeze-in'' of carriers in the InGaAs self-assembled quantum wires

Using molecular beam epitaxy, we prepared an anisotropic media consisting of InGaAs quantum wires epitaxially grown on GaAs (311)A. Anisotropy is observed in the lateral conductivity and photoluminescence polarization. However, an isotropic Hall effect is observed in the same samples. We show that the Hall effect in this anisotropic heterostructure remains isotropic regardless of the change of the doping in GaAs barriers and regardless of the InGaAs coverage, whereas the conductivity anisotropy experiences a strong change under these actions. In addition, we observed an anomalous increase in carrier density, ''freeze-in,'' at low temperatures. In order to explain this, we generalized the theory of Look [D. C. Look, Phys. Rev B 42, 3578 (1990)] by considering the low field magneto-transport in anisotropic media. This theory confirms that the Hall constant remains isotropic in anisotropic semiconductor heterostructures, agreeing with our experiment and explains the anomalous behavior of carriers as a result of multi-band conductivity.

36 MATERIALS SCIENCE↗

Magnetometry and transport data complement polarized neutron reflectometry in magnetic depth profiling

Exchange coupled magnetic hard layer/soft layer thin films show a variety of complex magnetization reversal mechanisms depending on the hierarchy of interaction strengths within and between the films. Magnetization reversal can include uniform rotation, soft layer biasing, as well as exchange spring behavior. We investigate the magnetization reversal of a CoPt/Permalloy/Ta/Permalloy heterostructure. Here, Stoner-Wohlfarth-type uniform magnetization rotation of the virtually free Permalloy layer and exchange spring behavior of the strongly pinned Permalloy layer are found in the same sample. We investigate the complex magnetization reversal by polarized neutron reflectometry, magnetometry, and magneto-transport. The synergy of combining these experimental methods together with theoretical modeling is key to obtain the complete quantitative depth resolved information of the magnetization reversal processes for a multilayer of mesoscopic thickness.

36 MATERIALS SCIENCE↗

Weak localization/antilocalization in a nearly symmetric In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well

We report weak antilocalization (WAL) measurements in a nearly symmetric In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well. In this system, an enhancement of the spin-orbit scattering time, equivalently the weakening of the WAL effect, is expected at carrier densities N{sub s} where equal magnitudes between the Rashba and Dresselhaus parameters ({alpha} = {+-}{beta}) are realized. Our magnetotransport measurements indeed exhibited a weakening of the WAL effect as a function of N{sub s}, though the weakening took place at only one carrier density. Our interpretation is that the value of {beta} is so small that the two carrier densities corresponding to {alpha} = {beta} and {alpha} = -{beta} are very close to each other. It turned out that the deduced values for the bulk Dresselhaus parameter {gamma} in In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum wells is considerably smaller than the k{center_dot}p value of 27 eVA{sup 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Magneto-transport Characterization of Double-doped InGaAs/InAlAs Heterostructures with High Indium Compositions

We investigated double-doped InGaAs/InAlAs heterostructures with high indium compositions. The heterostructures were grown by molecular beam epitaxy on GaAs(001) with metamorphic step-graded buffer layers. The magneto-transport characterization was performed by using Hall-bar devices. We observed non-monotonic magneto-resistance oscillations, which indicate a single two-dimensional electron gas (2DEG) with multiple-subband occupation or a 2DEG bilayer. We also observed weak-antilocalization in all samples, which is an evidence of spin-orbit coupling.

36 MATERIALS SCIENCE↗

Tunning of microstructure and thermoelectric properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics by high-magnetic-field sintering

The structural, magnetic, electrical, and thermal transport properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics sintered under high magnetic field were investigated. Crystal grain texturing and densification were achieved through cold-pressing and high-magnetic-field sintering techniques. The c-axis of the layered crystal grain was partly oriented along the c-axis of the pressed samples via a cold-pressing technique, and the degree of orientation was further increased while applying the magnetic field in the sample sintering progress. The easy magnetization axis of Ca{sub 3}Co{sub 4}O{sub 9} polycrystalline ceramics was found to be the c-axis. The room-temperature resistivity along the ab-plane of the sample sintered under 8 T magnetic field was about 30% smaller than that of the sample sintered without magnetic field, and the Seebeck coefficient of the former reached 177.7 {mu}V/K at the room temperature, which is about 50% larger than that of the latter. Consequently, for the sample sintered at 8 T magnetic field, the power factor along the ab-plane was enhanced by about 1.8 times compared to the sample without magnetic field sintering. The obtained result is suggested to originate from the variations of the carrier mobility and spin-orbital degeneracy due to high-magnetic-field sintering in the progress of the sample preparation.

36 MATERIALS SCIENCE↗

Correlation Between Bands Structure and Magneto-Transport Properties in n-type HgTe/CdTe Superlattice with Relatively Thin CdTe Barrier

Theoretical calculations of the electronic properties of n-type HgTe/CdTe superlattices (SLs) in the envelope function formalism have provided a reasonable agreement with the experimental data on the magneto-transport behavior. Numerical results of the band energies E(d{sub 2}), E(k{sub z}) and E(k{sub p}) in the direction of growth and in plane of the SLs predict that the system retains semiconductor characteristics for d{sub 1}/d{sub 2} = 2.69 and d{sub 2}<10 nm. For d{sub 2} = 3.2 nm the calculated effective band gap (E{sub g}({Gamma},4.2 K) = 48 meV) suggests that the material sample is a two-dimensional modulated nanostructure and a potential candidate to be used for the far infrared detection applications.

36 MATERIALS SCIENCE↗

Multi-step ion beam etching of sub-30 nm magnetic tunnel junctions for reducing leakage and MgO barrier damage

We have demonstrated the fabrication of sub 30 nm magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy. The multi-step ion beam etching (IBE) process performed for 18 min between 45 deg. and 30 deg. , at 500 V combined ion supply voltage, resulted in a 55 nm tall MTJ with 28 nm diameter. We used a negative tone electron beam resist as the hard mask, which maintained its lateral dimension during the IBE, allowing almost vertical pillar side profiles. The measurement results showed a tunnel magneto-resistance ratio of 13% at 1 k{Omega} junction resistance. With further optimization in IBE energy and multi-step etching process, it will be possible to fabricate perpendicularly oriented MTJs for future sub 30 nm non-volatile magnetic memory applications.

36 MATERIALS SCIENCE↗

Reduction in anti-ferromagnetic interactions in ion-beam deposited Fe{sub 3}O{sub 4} thin films

Phase pure Fe{sub 3}O{sub 4} thin films of thickness {approx}42 nm have been prepared on the Si(100) substrate by reactive ion beam sputtering in the growth temperature range of 150-250 deg. C. A high degree of phase purity in the 175 deg. C sample has been confirmed by the XRD, Raman shift, and R-T measurements. The polycrystalline films show a sharp Verway transition as supported by temperature dependent resistivity, AC susceptibility, and coercivity behavior. The significant feature of these films is the early saturation of their room temperature magnetization at {approx}400 mT, indicating the presence of low anti-ferromagnetic competitions in sharp contrast to most of the previous reports. The noticeable reduction of anti-phase boundaries and its dependence on growth temperature has been correlated with the energetic ion-beam deposition process, and explained in terms of the of ionic vacancy migration approach of Eerenstein et al.[Phys. Rev. B 68, 014428 (2003)]. The electronic conduction of these films is governed by near-neighbor hopping above 240 K and Shklovskii-Efros variable range hopping below this transition temperature.

36 MATERIALS SCIENCE↗