Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Quantifying electron transport in aggregated colloidal suspensions in the strong flow regime

Electron transport in complex fluids, biology, and soft matter is a valuable characteristic in processes ranging from redox reactions to electrochemical energy storage. These processes often employ conductor–insulator composites in which electron transport properties are fundamentally linked to the microstructure and dynamics of the conductive phase. While microstructure and dynamics are well recognized as key determinants of the electrical properties, a unified description of their effect has yet to be determined, especially under flowing conditions. In this work, the conductivity and shear viscosity are measured for conductive colloidal suspensions to build a unified description by exploiting both recent quantification of the effect of flow-induced dynamics on electron transport and well-established relationships between electrical properties, microstructure, and flow. These model suspensions consist of conductive carbon black (CB) particles dispersed in fluids of varying viscosities and dielectric constants. In a stable, well-characterized shear rate regime where all suspensions undergo self-similar agglomerate breakup, competing relationships between conductivity and shear rate were observed. To account for the role of variable agglomerate size, equivalent microstructural states were identified using a dimensionless fluid Mason number, Mn f , which allowed for isolation of the role of dynamics on the flow-induced electron transport rate. At equivalent microstructural states, shear-enhanced particle–particle collisions are found to dominate the electron transport rate. This work rationalizes seemingly contradictory experimental observations in literature concerning the shear-dependent electrical properties of CB suspensions and can be extended to other flowing composite systems.

Science & Technology - Other Topics↗

Observation of crystallization and characterizations on thiourea cadmium iodide: A semi-organic optical material

Graphical abstract: - Highlights: • Thiourea cadmium iodide (TCI) was grown by slow evaporation solution technique. • Morphology and growth rate of the grown compound are determined with the help of inverted microscope. • Optical band gap has been determined. • Microstructure analysis has been reported. • Electrical study has been reported and discussed. - Abstract: In this work, the single crystals of thiourea cadmium iodide were grown by slow evaporation solution technique in two different ratios 2:1 and 1:1. During the formation of their single crystals the morphological features and its live growth process were recorded with the help of inverted microscope. Structural studies of the grown crystals have been carried out by powder X-ray diffraction to confirm the crystal system and vibrational modes by Raman spectroscopy. The optical energy band gaps were investigated through UV–vis spectroscopy study. The surface morphology of the grown single crystals was analyzed by using Scanning Electron Microscope and thermal analysis was carried out by using thermogravimetric analysis. The electrical properties were also studied as a function of frequency and the obtained results are discussed.

36 MATERIALS SCIENCE↗

Transfer of microstructure pattern of CNTs onto flexible substrate using hot press technique for sensing applications

Graphical abstract: - Highlights: • Successfully transfer of microstructure patterned CNTs on PET substrate. • Demonstrate as resistor-based NH{sub 3} gas sensor in the sub-ppm range. • Excellent photodetector having instantaneous response and recovery characteristics. • An effective technique to grow and produce flexible electronic device. - Abstract: In this work, we report the successful and efficient transfer process of two- dimensional (2-D) vertically aligned carbon nanotubes (CNTs) onto polyethylene terephthalate (PET) substrate by hot pressing method with an aim to develop flexible sensor devices. Carbon nanotubes are synthesized by cold wall thermal chemical vapor deposition using patterned SiO{sub 2} substrate under low pressure. The height of the pattern of CNTs is controlled by reaction time. The entire growth and transfer process is carried out within 30 min. Strong adhesion between the nanotube and polyethylene terephthalate substrate was observed in the post-transferred case. Raman spectroscopy and scanning electron microscope (SEM) studies are used to analyze the microstructure of carbon nanotube film before and after hot pressing. This technique shows great potential for the fabrication of flexible sensing devices. We report for the first time, the application of patterned microstructure developed by this technique in the development of gas sensor and optoelectronic device. Surface resistive mode is used for detection of ammonia (NH{sub 3}) gas in the sub-ppm range. An impressive photoconducting response is also observed in the visible wavelength. The reproducibility of the sample was checked and the results indicate the possibility of use of carbon nanotube as gas sensor, photodetector, CCDs etc.

36 MATERIALS SCIENCE↗

Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes

This study explored the dynamic-mechanical behavior of a novel low-density (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloy (RHEA) across strain rates ranging from 1.0×10 3 to 3.5×10 3 s –1 . A significant increase in the yield and ultimate compressive strengths with rising strain rates up to 3.0×10 3 s –1 was observed and attributed to enhanced dislocation activities and stress-induced microstructural transformations. The formation of the B2 phase and Zr 5 Al 3 precipitates was found to be crucial in bolstering the alloy strength at high strain rates. Beyond strain rates of 3.0×10 3 s –1 , a decrease in strength occurred due to thermal softening and strain localization. Microstructural analyses at 3.5×10 3 s –1 revealed grain refinement, the development of micro shear bands, and dislocation tangles, which were indicative of dynamic recrystallization. Besides, the findings also revealed that the post-dynamic compression heat treatment further enhanced the hardness and microstructural stability of the alloy. These results highlight the potential of the (TiNbZr) 89 (AlTa) 11 RHEA for applications requiring materials with high strength-to-weight ratios, particularly in dynamically loaded environments. It is expected that the results of this study will further advance our fundamental understanding of the behavior of RHEAs under extreme conditions, thereby opening new avenues for material innovation.

36 MATERIALS SCIENCE↗

Microstructural evolution of P92 ferritic/martensitic steel under argon ion irradiation

Microstructural evolution of P92 ferritic/martensitic steel irradiated by Ar{sup +} ion beams at doses from 0.6 to 230 displacements per atom (dpa) at room temperature was investigated with conventional transmission electron microscope technique. Selected-area electron diffraction combined with bright-field and dark-field contrast image indicated that carbide/matrix interfaces were more easily damaged. The carbide peripheries became partly amorphous at irradiation dose of 2.3 dpa and were almost complete amorphous at the dose of 11.5 dpa. The small carbides would re-precipitate in matrices at 34.5 dpa. Energy dispersive X-ray analysis revealed that segregation of Cr and W and depletion of Fe in carbides occurred under irradiation. With the irradiation dose increasing, the irradiation induced segregation and depletion became more severe, which would influence mechanical properties of the steel. - Research Highlights: {yields} Carbide/matrix interfaces in P92 ferritic/martensitic steel were easily damaged. {yields} Small carbides re-precipitated in matrices after higher dose irradiation. {yields} Segregation of Cr and W and depletion of Fe in carbides occurred after irradiation.

36 MATERIALS SCIENCE↗

High-Entropy Alloys for Accelerator Beam Window Applications

Development of novel high-entropy alloys (HEAs) is currently underway for potential use as beam windows in future multi-megawatt target systems at Fermilab. HEAs encompass a new class of materials with a vast design space allowing for material properties to be tailored for particular applications and to potentially offer improved resistance to beam-induced radiation damage and thermal shock effects. The alloy systems being studied consist of several compositions of AlCoCrMnTiV with 4 6 component elements. These alloys are all predicted by CALPHAD simulation to have a single-phase BCC crystal structure and low density, with some compositions displaying ordered, nanoscale precipitates. This presentation will briefly discuss alloy design and synthesis before giving a detailed description of the characterization studies of these HEAs in both the pristine state and post-irradiation by low-energy heavy ions to high damage levels. Electron microscopy techniques to quantify elemental homogeneity and composition, determine grain size, shape, and orientation, and quantify lattice parameters, defect structures and precipitate phases are all being used to study alloy microstructures. Mechanical properties of the alloys at the microscale will be reported. The evolution of these properties as a function of radiation damage will also be described. Bulk thermal characteristics of these HEAs have been tested to measure specific heat capacity and coefficient of thermal expansion as a function of temperature. To determine bulk tensile properties a miniature tensile testing apparatus is under development; it s commissioning will be covered briefly. The talk will conclude with our plans for alloy down-selection.

Burleigh, A. [Fermilab]↗

Microstructure characterization and electrical transport of nanocrystalline ZrO{sub 2}–CeO{sub 2} solid solution

Graphical abstract: - Highlights: • Monoclinic ZrO{sub 2} phase has been changed to cubic ZrO{sub 2} phase within a short milling. • Conductivity increases due to change of phase from monoclinic to cubic. • A maximum has been observed in the s–T curve. • A transformation from −ve to +ve ac magnetoconductance has been observed. - Abstract: Nanocrystalline ZrO{sub 2}–CeO{sub 2} (ZC) solid solution is synthesized by high energy ball-milling the powder mixture of monoclinic (m) ZrO{sub 2}–10 mol% CeO{sub 2} in air medium. X-ray powder diffraction (XRD) patterns show that the method IS effective to synthesize cubic (c) ZrO{sub 2} phase within a short milling time. Formation mechanism, structural and microstructural changes of different phases and relative phase abundances have been estimated by Rietveld analysis of XRD patterns. The dc conductivity has been enhanced due to monoclinic to cubic phase transformation. A transformation from small polaron hopping to correlated barrier hoping has been observed from the of temperature dependence frequency exponent study. A crossover from negative to positive ac magnetoconductance has been observed at temperature T = 280 K and 230 K for unmilled (ZC0H) and 8 h (ZC8H) milled samples, respectively.

36 MATERIALS SCIENCE↗

Grain Refinement by Authigenic Inoculation Inherited from the Medium-Range Order Structure of Ni-Cr-W Superalloy

The combination of liquidus casting and thermal control solidification furnace was applied to obtain a fine-grained ingot. A rapid quenching method and x-ray diffraction measurement were used to investigate the effect of authigenic inoculation on grain refinement. The structure factor S(Q) of liquid Ni-Cr-W superalloy at 1400 °C (Liquidus temperature) and bright-field image of the microstructures quenched from 1400 °C have been measured by the high-temperature x-ray diffractometer and the transmission electron microscopy (TEM), respectively. The results show that a pre-peak exists on a S(Q) curve at the liquidus temperature. The clusters of atom in rapidly quenched microstructures obtained by isothermal heat treatment at 1400 °C were studied using TEM. Meanwhile, the effect of isothermal different temperatures on rapidly quenched microstructures was studied. The results also show that there are only the globular, equiaxed grains distributed in the solidification structure. These particles are inherited from the medium-range order structure, which is beneficial for grain refinement. The normalized work-hardening rate-strain curve indicates the work-hardening rate of fine grain is higher than that of conventional grain at the same temperature and the same deformation.

36 MATERIALS SCIENCE↗

Spatially Resolved Polarization Switching near a Planar Defect by Design: Mesoscopic Mechanisms at Tilt Grain Boundary in Bismuth Ferrite

The effect of microstructure on ferroelectric domain nucleation in epitaxial bismuth ferrite was probed at a single atomically-defined defect: an artificially fabricated model bicrystal grain boundary (GB). Switching Spectroscopy Piezoresponse Force Microscopy is used to map the variation of local hysteresis loops at the grain boundary and its immediate vicinity. We found the influence of the GB on nucleation to be relatively weak, resulting in a slight shift of the negative nucleation bias to higher (negative) voltages. The mesoscopic mechanisms of grain boundary effect on local polarization switching are studied in detail using phase field modeling, elucidating the complex mechanisms governed by the interplay between ferroelectric and ferroelastic wall energies, depolarization fields, and interface charge. The combination of phase field modeling and SS-PFM allows quantitative analysis of mesoscopic mechanisms for polarization switching, and hence suggests a route for optimizing materials properties through microstructure optimization.

36 MATERIALS SCIENCE↗

Permanent Mold Casting of JIS-AC4C Aluminum Alloy Using a Low-Temperature Mold

Permanent mold casting using mold temperatures below 200 deg. C was conducted to obtain a high-strength, thin-walled casting. Al-7.36 mass% Si -0.18 Cu- 0.27Mg-0.34Fe alloy JIS-AC4C was cast using a bottom pouring cast plan. The product had a rectangular tube shape (70 mm W x 68 mm D x 180 mm H) with wall thicknesses of 1, 3 and 5 mm. The effect of heat insulation at the melt path was compared when using a sand runner insert and when using a steel runner insert as well as a powder mold release agent. Fine microstructures were observed in the casting. The smaller the thickness, the higher the hardness with smaller secondary dendrite arm spacing (SDAS). However, the hardness and the SDAS were unaffected by the mold temperature. It was proposed that the avoidance of the formation of primary {alpha} dendrite at the melt path generates a higher strength casting with adequate mold filling.

36 MATERIALS SCIENCE↗

Effects of chemical segregation on ductility-anisotropy in high strength Fe-Mn-Al-C lightweight austenitic steels

Ductile Fe-Mn-Al-C lightweight steels offer great potential as high specific strength materials for weight critical applications. In the present work, very high yield (~1 GPa) and ultimate tensile strength levels (~1.5 GPa) were obtained along the rolling and transverse directions of Fe-30Mn-8.5Al-0.9Si-0.9C-0.5Mo (wt.%), with high tensile elongation to failure of ~35%. This excellent mechanical behavior was attributed to the nanoscale, ordered κ-carbide precipitates formed during aging after rolling. However, tensile ductility was not isotropic through all directions of the rolled plate. In particular, the ductility was consistently lower than 5% true strain along the normal direction. Upon detailed microstructural investigations, micro-scale lamellar chemical micro-segregation bands were detected, which caused the observed anisotropic embrittlement along certain plate directions. These bands resulted in low failure strains along the normal direction since it is oriented perpendicular to these chemical segregation bands, resulting in a failure type reminiscent of delamination-induced cleavage fracture. Chemical segregation causes an inhomogeneous κ-carbide precipitate distribution upon aging, producing more pronounced mechanical anisotropy after peak-aging as compared to the solution heat treated samples. Surprisingly, deformation twinning was observed after tensile deformation of solution-heat treated specimens via electron-backscatter diffraction experiments, which is anomalous for a high stacking faulty energy (SFE) material. Further, it was proposed that chemical micro-segregation promotes locally different SFE regions, leading to deformation twinning in this nominally high SFE material. Overall, this work demonstrates the effects of chemical segregation on mechanical properties and microstructural evolution in a high performance, lightweight Fe-Mn-Al-C steel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metallurgical aspects influencing the resistance to steam oxidation and fracture toughness of select advanced replacement alloys for LWR core internals

Life extension of the existing nuclear reactors imposes accumulated damages, such as higher fluences and longer period of corrosion, to structural materials, which would result in significant challenges to the traditional reactor materials such as type 304 and 316 stainless steels. Advanced alloys with superior radiation resistance will increase safety margins, design flexibility, and economics for not only the life extension of the existing fleet but also new builds with advanced reactor designs. The Electric Power Research Institute (EPRI) teamed up with Department of Energy (DOE) to initiate the Advanced Radiation Resistant Materials (ARRM) program, aiming to develop and test degradation resistant alloys from current commercial alloy specifications by 2021 to a new advanced alloy with superior degradation resistance in light water reactor (LWR)-relevant environments by 2024. Corrosion resistance in water environment is one of the fundamental properties required for LWR core internal materials. High-temperature steam oxidation tests are not only an accelerated life testing method to uncover potential failure modes in a short period of time, but also an approach to evaluate materials’ resistance to accidental scenarios. Coupons, prepared from fourteen candidate alloys that were selected under the ARRM program, were exposed to 1 bar full steam with ~10 part-per-billion oxygen content at 600 and 650°C for up to 5,000 h, which were weighed at 500-h intervals. Ni-base superalloys are an important class of alloys for reactor applications. Alloys 690, 725, and X- 750 were three of the selected Ni-base superalloys exposed to the steam tests. This report summarizes the metallurgical aspects, such as alloy thermodynamics and the nature of the oxides and the diffusivities of primary elements, and their effects on oxidation behavior of the three alloys. In addition to monitoring mass change, microstructures of the 5000h-exposed samples of alloys 690, 725, and X-750 were characterized using scanning and transmission electron microscopy and energy dispersive x-ray spectroscopy. Together with thermodynamic calculations, the scale constitution and its exfoliation behavior were discussed. Based on experimental and theoretical values, a new model was proposed to quantitatively estimate the metal thickness loss of the alloys. Alloy X-750 was found to have the best resistance to steam oxidation with the least metal thickness loss (<1 μm), which were slightly superior to alloy 690. Alloy 725 exhibited the worst resistance to steam oxidation with the greatest metal thickness loss, e.g., ~2.5 μm at 650°C, which is nearly three times of the metal thickness losses of alloys 690 and X-750 at 650°C. The greatest metal thickness loss of alloy 725 might be attributable to its high Mo content. Photos of the fracture toughness tested samples of eight alloys are presented, which will be correlated with their fracture toughness results and planned tensile test results to select representative alloy samples for detailed microstructural characterization to reveal their microstructure and properties relationships.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Investigation of the Workability and Response of Ti-6Al-4V Titanium alloys at Lower Elevated Temperature and Higher Strain Rate

Titanium and its alloys have a wide range of applications in various industries such as aerospace, medical, automotive and even commercial products. However, formability of titanium alloys has always been an issue. This study presents the results of an investigation on the workability and response of Ti-6Al-4V deformed at different strain rates and lower elevated temperatures with different initial microstructures. Compression tests of cylindrical specimens were performed at various temperatures (300 deg. C, 400 deg. C, 450 deg. C, 500 deg. C) and at different strain rates (0.001 s{sup -1}, 0.02 s{sup -1} and 0.1 s{sup -1}). The effects of strain rate, temperature and initial microstructure on the workability of the Ti alloy were investigated. Based on these experimental results, workability maps for the respective initial microstructures were developed. Results showed that temperature played an important role in the formability of Ti-6Al-4V titanium alloys unlike strain rate. In addition, feasibility study on Multi-Directional Forging (MDF) was performed and positive results were obtained. It was demonstrated that Ti-6Al-4V titanium alloys can undergo severe plastic deformation at lower elevated temperature (400-500 deg. C) and at a higher strain rate of 0.1 s{sup -1}.

36 MATERIALS SCIENCE↗

TRISO-Coated Fuel Durability Under Extreme Conditions

The PIs propose to examine TRISO-coated particles (SiC and ZrC coatings) in an integrated two-part study. In the first part, experiments will be performed to assess the reaction kinetics of the carbides under CO-CO2 environments at temperatures up to 1800 degree C. Kinetic model will be applied to describe the degradation. Scanning and transmission electron microscopy will be employed to establish the chemical and microstructure evolution under the imposed environmental conditions. The second part of the proposed work focuses on establishing the role of the high temperature, environmental exposure described above on the mechanical behavior of TRISO-coated particles. Electron microscopy and other advanced techniques will be subsequently performed to evaluate failure mechanisms. The work is expected to reveal relationships between corrosion reactions, starting material characteristics (polytype of SiC, impurity concentration, flaw distribution), flaw healing behavior, and crack growth.

36 MATERIALS SCIENCE↗

Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation

The equiatomic CrMnFeCoNi high-entropy alloy (HEA) exhibits outstanding toughness and excellent strength-ductility combination at cryogenic temperatures. However, its strength is relatively low at room temperature. In order to strengthen this HEA, microalloying additions of 0.8 at.% Nb and C were made and its properties and microstructure evaluated. It was found that the microalloying resulted in the formation of carbide precipitates and a reduction of the grain size to ~2.6 μm. As a result, the room-temperature tensile yield strength (732 MPa) of the microalloyed HEA is roughly double that of the base HEA (with a concomitant increase in the ultimate strength) while its ductility is maintained at a relatively high level (elongation to fracture of ~32%). The strengthening is due to precipitation hardening from the nanoscale carbide particles and grain refinement.

36 MATERIALS SCIENCE↗

Microstructure and rolling capability of modified AZ31-Ce-Gd alloys

AZ31-Ce-Gd alloys were studied and the influence of cerium (Ce) and gadolinium (Gd) on the microstructure and rolling capability of AZ31 alloy was investigated. The results indicated that the grains of AZ31 alloy were refined with Ce and Gd addition. Ce and Gd addition resulted in the formation of Al{sub 4}Ce, Al{sub 2}Gd and Mg{sub 3}Gd. After homogenization and rolling, the Al{sub 4}Ce, Al{sub 2}Gd and Mg{sub 3}Gd still existed. The rolling capability of AZ31 alloy was improved obviously with Ce and Gd addition. However, once Gd content increased to a certain value, the rolling capability of the modified alloy declined but still better than that of AZ31 alloy.

36 MATERIALS SCIENCE↗

A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper

The deformation field in machining was controlled to access a range of deformation parameters—strains of 1–15, strain rates of 10–100,000 s –1 and temperatures of up to 0.4 T m —in the severe plastic deformation (SPD) of copper. This range is far wider than has beenaccessed to date in conventional SPD methods, enabling a study of the interactive effects of the parameters on microstructure andstrength properties. Nano-twinning was demonstrated at strain rates as small as 1000 s –1 at 196 °C and at strain rates of ≥10,000 s –1 even when the deformation temperature was well above room temperature. Bi-modal grain structures were produced ina single stage of deformation through in situ partial dynamic recrystallization. Furthermore, the SPD conditions for engineering specific microstructuresby deformation rate control are presented in the form of maps, both in deformation parameter space and in terms of the Zener–Hollomon parameter. 20

36 MATERIALS SCIENCE↗

Volumetric energy density impact on mechanical properties of additively manufactured 718 Ni alloy

The 718 Ni-based superalloy has gained enormous attention in the additive manufacturing community for its great weldability, allowing for complex geometries to be formed, and its superb mechanical strength. Here we explore the influence of a wide range of major build parameters on microstructures and mechanical properties of 718 Ni alloys. Volumetric energy density appears to be one of the major parameters that captures the relationship between energy input and measured mechanical properties and microstructures of the alloys. A threshold energy density was identified below which the properties of the additively manufactured specimen degrade substantially. Finally, the influence of energy density on the quality of the built specimen simulated using Flow3D AM correlates well with the experimental results.

36 MATERIALS SCIENCE↗