Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Microstructure, texture and mechanical properties of AA 1060 aluminum alloy processed by cryogenic accumulative roll bonding

Highlights: • The Al sheets were accumulative roll bonded to five cycles at cryogenic temperature. • The microstructure, texture and mechanical properties of ARB sheets were investigated. • The texture evolution at surface layer was quantified by mathematical formulae. • The strength of the β fiber at center layer was affected by the initial texture and the strain. - Abstract: AA 1060 aluminum alloy sheet was processed to five accumulative roll bonding (ARB) cycles at cryogenic temperature. The microstructure, texture and mechanical properties of the ARB processed sheets were investigated. The results show that the surface layer of the ARB processed sheets exhibits a significant r-cube shear texture. Initial cube orientation at the surface layer was gradually rotated to the r-cube orientation during the ARB process, leading to the increase in the strength of the r-cube shear texture with ARB cycles. The texture evolution at the surface layer was quantified in terms of a simple relation between the texture volume fractions and accumulated true strain. The strength of the β fiber rolling texture and the distribution of orientation intensities along the β fiber at the center layer were strongly affected by the initial texture. As the ARB cycles increased, the initial texture was changed from the cube texture to the r-cube texture, leading to a continuous increase in the strength of the β fiber rolling texture dominated by the C orientation. The yield and ultimate tensile strength of the ARB processed sheets increased markedly after the first ARB cycle and then increased slowly with increasing ARB cycles, while the elongation decreased accordingly.

36 MATERIALS SCIENCE↗

Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment

Highlights: • Study of usefulness of stored strain energy distribution map of the material for variable temperature range. • Advantage of using stored strain energy distribution map • Variation observed in stored energy between isothermal annealing treatment and interrupted annealing treatment. - Abstract: This research work is an attempt to understand the effect of stored strain energy heterogeneity over macro-scale, induced during interrupted annealing treatment, on the micro structural evolution in a heavily cold rolled AISI 304L austenitic stainless steel. The cold rolled AISI 304L stainless steel (SS) samples were subjected to different annealing treatments. The microstructures obtained after each annealing treatment were characterized using optical and electron microscopy techniques. Further, an attempt was made to estimate the stored strain energy by a novel approach of micro hardness measurement both over small scale (area 3600 μm{sup 2}) and large scale (area ~0.25 mm{sup 2}). The stored strain energy was determined using hardness values. Using these data, spatial stored strain energy distribution contour maps were created. They were, in turn, used to characterize the local softening behavior both at micro and macro-scale levels after each interrupted annealing treatment. The results showed that, interrupted annealing treatment induces increased stored strain energy heterogeneity after each annealing interruptions. Also, it was possible to determine recrystallization kinetics of the material using stored strain energy map, which helps in designing annealing cycles for achieving ultrafine grained microstructure.

36 MATERIALS SCIENCE↗

Microstructure evolution and a new mechanism of B2 phase on room temperature mechanical properties of Ti-47Al-2Cr-2Nb alloy prepared by hot isostatic pressing

Highlights: • The microstructure evolution of Ti-47Al-2Cr-2Nb alolly was investigated in detail. • The foramtion of B{sub 2} phase can be adjusted in Ti-47Al-2Cr-2Nb alloy. • A new mechanism of B{sub 2} phase on room temperature mechanical properties of Ti-47Al-2Cr-2Nb alloy was proposed. - Abstract: The formation of B{sub 2} phase was adjusted via various hot isostatic pressing processes in Ti-47Al-2Cr-2Nb alloy. The microstructure evolution and a new mechanism of B{sub 2} phase on room temperature mechanical properties was investigated by BSE, EBSD and TEM in detail. The result shows that the formation of B{sub 2} phase leads to Cr element content decrease in γ matrix phase, which results in lattice parameter increase, namely the c/a ratio of γ matrix phase. Finally, at room temperature the mechanical properties of Ti-47Al-2Cr-2Nb alloy deteriorates.

36 MATERIALS SCIENCE↗

Effect of compositional changes on microstructure in additively manufactured aluminum alloy 2139

Highlights: • Volatile elements preferentially vaporize during additive manufacturing. • Vapor losses affect precipitate habit plane in aluminum alloy 2139. • Above 0.2 wt% Mg the precipitate forms on the preferred {111} habit plane. • Higher strength is associated with precipitates on the {111} habit planes. - Abstract: A matrix of nine experiments was conducted on aluminum alloy 2139 samples made by an electron beam directed energy deposition additive manufacturing process to characterize the effect of magnesium vaporization loss on microstructure and properties. The nine-sample matrix included three different magnesium levels deposited onto material at three different temperatures. The goal was to quantify the variability in the deposited material as a function of allowable magnesium content and the local temperature of the substrate or previous layer. The results show that temperature variations in the substrate up to 100 K have no significant effect on the amount of magnesium loss; however, relatively large variations in Mg content, up to a ±0.25 wt%, can significantly affect the microstructure and mechanical properties. This is due to a change in how the precipitate phase forms, which influences the mechanism by which the alloy is strengthened.

36 MATERIALS SCIENCE↗

On the microstructure characterization of the AA2098-T351 alloy welded by FSW

Highlights: • The microstructural characterization of the AA2098-T351 Al-Cu-Li alloy welded by FSW was carried out. • There was strong correlation between the results of the various techniques. • DSC was an effective technique for characterization of GP zones complementing the microstructural characterization by TEM. - Abstract: The complex structure of the AA2098-T351 alloy welded by friction stir welding (FSW) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and microhardness measurements. Thermal modelling process of the FSW process was carried out by soldering thermocouples at distances of 6, 9 and 12 mm from the weld centerline, and thermocouple measurements were used as input data into the model. Finite element software COMSOL v5.2 was used for data analysis. The prevailing phases in the base metal (BM) are T1 (Al{sub 2}CuLi) θ′ (Al{sub 2}Cu), δ′/β′(Al{sub 3}(Li,Zr)) and Ω (Al{sub 2}Cu). In the heat affected zone (HAZ), either in the retreating or advancing sides, θ′ phase was not identified. In the thermomechanical affected zone (TMAZ), T1, δ′/β′, GP zones phase were detected in the retreating side, whereas T1 and Guinier-Preston (GP) zones were not observed in the advancing side. This result supports the asymmetric behavior observed in the microhardness profile of the weld. In the stir zone (SZ), GP zones, T1, δ′/β′ (Al{sub 3}(Li,Zr)) and Ω were identified.

36 MATERIALS SCIENCE↗

Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys

Highlights: • Rapid solidification caused formation of nanoscaled Si particle chains. • Sr or Ce induced the columnar transition zone only at extremely high cooling rate. • Enhancement of hardness is attributed to fine dispersion of eutectic Si, grain refinement and the supersaturation of Si. • Sr or Ce caused further enhancement of hardness, attributing to Si modification. - Abstract: A series of Al7Si based alloys with trace addition of Sr, Ce or P were prepared using melt-spinning at two different high cooling rates, and the microstructure as well as the hardness of the ribbons was comprehensively studied. The results show that Sr or Ce induces the formation of columnar transition zone and modifies the morphology of eutectic Si phase from dispersed particle chains to fine fibers only at extremely high cooling rate. However, P has little effect on the microstructure of either α-Al or eutectic Si. Compared with conventional casting, the Al7Si ribbons exhibit extremely high hardness due to the fine dispersion of eutectic Si, the grain refinement and the supersaturation of Si. The hardness is further enhanced by Sr or Ce addition at extremely high cooling rate, especially for columnar and equiaxed zones, attributing to the modification effect on Si phase.

36 MATERIALS SCIENCE↗

Investigation of annealing temperature on microstructure and texture of Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel

Highlights: • Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel was investigated. • Shear bands provided recrystallization nucleation sites. • Annealing temperature can affect microstructure and texture. • r-bar increased to a maximum value (1.69) and then decreased to 1.42. - Abstract: The evolution of microstructure and texture of Fe-19Cr-2Mo-Nb-Ti ferritic stainless steel annealed at different temperatures was investigated using a combination of X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). EBSD investigations confirm that the in-grain shear bands provide more recrystallization nucleation sites to γ-fiber recrystallization grains with high Taylor factor orientations during cold rolling requiring further annealing for a more homogenous equiaxied grain structure. As the annealing temperatures increase, the grains in center layer are oriented towards {110}∥ND, and the recrystallization grains at 1050 °C are dominated by the uniform and equiaxial γ-fiber grains favourable for the improvement of r-values, while the occurrence of {100} <011> texture detrimental to r-values indicates that an exorbitant annealing temperature can reduce the intensity of γ-fiber textures affecting the formability, accordingly, the average plastic strain ratio of ferritic stainless steel increases sharply up to a maximum value (1.69) and then decreases to a certain value (1.42).

36 MATERIALS SCIENCE↗

Effect of trace amounts of added Sc on microstructure and mechanical properties of 2055 aluminum alloy

Highlights: • Effect of trace Sc on microstructure and mechanical properties in 2055 Al-alloy was investigated. • T{sub 1} is the main strengthening phase in Sc free and Sc added 2055 alloy at the aging temperature of 175°C and 200°C. • The refinement of T{sub 1} by Sc addition depends on the aging temperature. • Mechanical properties were deteriorated by Sc at the aging temperature of 175°C and improved at 200°C aging treatment. - Abstract: The effects of Sc additions and isothermal aging on the microstructure and mechanical properties of 2055 aluminum alloy have been investigated. The isothermal aging temperatures investigated were 175 °C and 200 °C. Results show that the aging temperature does not affect the type of precipitates in both Sc-free and Sc-added 2055 Al alloys. While remarkable changes in the size and number density of T{sub 1} (Al{sub 2}CuLi) precipitates have been observed. For samples aged at 175 °C for 8 h, the average length of T{sub 1} precipitates was increased from 39.9 nm to 45.6 nm, the number density decreased from 5.77 × 10{sup 22} m{sup −3} to 3.68 × 10{sup 22} m{sup −3} after Sc addition. On the contrary, when samples were aged at 200 °C for 8 h, the length decreased from 59.89 nm to 43.32 nm and number density increased from 2.13 × 10{sup 22} m{sup −3} to 3.00 × 10{sup 22} m{sup −3} by adding trace Sc. Slight deterioration of tensile strength and yield strength with higher ductility was founded at the aging temperature of 175 °C for 8 h due to the larger size and lower number density of T{sub 1} precipitates along with the formation of a W (AlCuSc) phase during the casting or homogenization processes. When aging temperature increased to 200 °C, tensile strength and yield strength were significantly improved by Sc addition without losing ductility. Highly dense fine T{sub 1} precipitates take responsible for the strength improvement, and to some extent it compensated the strength loss caused by the formation of W phase. A “vacancy-prison” mechanism was adopted to explain the effect of Sc additions on the precipitation of T{sub 1} phase as a function of aging temperature.

36 MATERIALS SCIENCE↗

Microstructure and nanoindentation analysis of Mg-SiC nanocomposite powders synthesized by mechanical milling

Highlights: • Mechanical milling as an effective solution to reach a homogeneous distribution of SiC nanoparticles up to 10 vol% in Mg matrix • No deformation twinning in the nanostructured Mg matrix even after the severe plastic deformation and hard SiC nanoparticles up to 10 vol%. • Significant enhancement of nanohardness and reduced elastic modulus in the milled nanocomposite powders - Abstract: Mixtures of magnesium powder and SiC nanoparticles at various volume fractions were mechanically milled to produce nanocrystalline Mg-SiC nanocomposites. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to characterize the microstructure of the milled powders. The microstructural evidences revealed that mechanical milling is a proper method to achieve a uniform distribution of the SiC nanoparticles, even up to 10% in the Mg matrix. Based on the results, higher volume fraction of the SiC nanoparticles raise the value of measured microstrain and reduce the crystallite size of the Mg matrix. The TEM results pointed to the fact that no deformation twinning takes place in the nanostructured Mg matrix even after severe plastic deformation through mechanical milling and the presence of hard SiC nanoparticles up to 10 vol%. The effects of nanoparticle volume fraction on mechanical properties of the milled Mg-SiC nanocomposites were evaluated using nanoindentation tests. The results clearly showed a significant enhancement of nanohardness and reduced elastic modulus in the milled powders compared to that of the reference material namely as-received pure magnesium. It was found that the SiC nanoparticles (even up to 10 vol%), well distributed in the magnesium matrix, remarkably improve the reduced elastic modulus and nanohardness of the nanocomposite powders.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical property and microstructure evolution of nitrogen-modified Ti-6Al-4V alloy with core-shell structure by hot compression

Highlights: • Core-shell structured Ti-6Al-4 V is composed of α shells and α + β cores. • Nitrogen solution and core-shell structure significantly enhances the strength. • Core-shell structural alloy performs inhomogeneous deformation. - Abstract: Core-shell (CS) structured Ti-6Al-4 V (Ti64) alloy with single α shells and duplex α + β cores was fabricated by powder nitriding and spark plasma sintering. The mechanical property and microstructure evolution of CS-Ti64 alloy was investigated by compression at temperatures of 950–1100 °C and strain rates of 0.001–1 s{sup −1}. The nitrogen-induced solid solution strengthening and the nitrogen-stabilized CS structure significantly enhanced the compressive strength. Microstructure evolution of CS-Ti64, involved inhomogeneous deformation of the core and shell, which was quite different from that of the commercial Ti64. Regions adjacent to shells and central locations of cores suffered large strain and therefore preferentially underwent dynamic recrystallization (DRX). The deformation mechanism of the novel CS-Ti64 alloy was discussed in terms of the α shells, α laths and DRX.

36 MATERIALS SCIENCE↗

Three-dimensional microstructural analysis of fragmentation behavior of platelet Al3Ti particles in Al-Al3Ti composite deformed by equal-channel angular pressing

Highlights: • Particle distribution in ECAPed Al-Al{sub 3}Ti composite depends on material flow of matrix. • Fragmentation of Al{sub 3}Ti particles by ECAP occurs along twin boundary in the particles. • Al{sub 3}Ti particles in the composite fragment after twin deformation of the particles. - Abstract: The fragmentation of platelet Al{sub 3}Ti particles in an Al-Al{sub 3}Ti composite by equal-channel angular pressing (ECAP) is investigated using three-dimensional (3D) microstructural evaluation and crystallography. The Al-Al{sub 3}Ti composite comprises coarse platelet Al{sub 3}Ti particles in an α-Al matrix. The ECAP of this composite is performed for up to 4 passes under processing routes A, B{sub c}, and C. Route B{sub c} produces the smallest Al{sub 3}Ti particle fragments in comparison with the fragments produced under routes A and C. This is because that route B{sub c} produces the largest number of shearing directions and shearing planes. Platelet Al{sub 3}Ti particle fragments in the specimen deformed by ECAP under route A are homogeneously distributed along the deformation axis. In contrast, in the specimens deformed by four ECAP passes under routes B{sub c} and C, the Al{sub 3}Ti particle fragments are gathered into several groups. The fragment groups have a length similar to the initial length of the platelet Al{sub 3}Ti particles. These spatial distributions of particle fragments can be explained by material flow of α-Al matrix during ECAP. Moreover, from 3D microstructural evaluation and crystallographic analysis of the Al{sub 3}Ti particle fragments, it is found that the Al{sub 3}Ti particles are preferentially fragmented on the twin boundary plane of {112}{sub Al3Ti}. Therefore, it is concluded that fragmentation of a platelet Al{sub 3}Ti particle by ECAP occurs along the twin boundary plane after twin deformation.

36 MATERIALS SCIENCE↗

Formation of gradient microstructure and mechanical properties of hot-pressed W-20 wt% Cu composites after sliding friction severe deformation

Highlights: • W particles of composites were refined during sliding friction treatment (SFD). • Dislocation, dislocation tangles and boundary clearly exist in deformed W particle. • YS and UTS of SFDed sample are 308.74 MPa and 553.60 MPa owing to the refinement. • Electrical conductivity of SFDed sample decreased from 33 IACS% to 28.5 IACS%. • Fracture mode changing from inter-granular mode to trans-granular. - Abstract: W-based alloys are currently considered promising candidates for high heat flux components in future fusion reactors. In this paper, hot pressed W-20 wt%Cu composites were treated at room temperature using a sliding friction severe deformation (SFD) process, with a moving speed of 0.2 m/s and an applied load of 500 N. Microstructural evolution of composites after the SFD treatment was evaluated and compared with that of the untreated composites. Results showed that there was a gradient structure generated and an obvious refinement in tungsten particles size in the surface layer after the SFD process. The average particle size of tungsten in the SFD treated composites was 2.60 μm, whereas it was 4.5 μm for tungsten in the untreated composites. Fracture surfaces of the composites indicated that the SFD treatment destroyed the W skeleton and changed fracture mode from predominant inter-granular one to trans-granular one due to the decrease in contact area of W-W inter-particles. Yield strength and ultimate tensile strength of composites after the SFD treatment were 308 MPa and 553 MPa, respectively. The treated composites exhibited micro-hardness values with an average reading of about 308 HV. Analysis of the facture microstructures clearly suggested that the tungsten particles in the treated composites are consisted of dislocations and boundaries as well as dislocation tangles. The electrical conductivity of the composites was decreased from 33 IACS% to 28.5 IACS% after the SFD treatment, mainly due to loss or squeezing of copper into the inner surface.

36 MATERIALS SCIENCE↗

Effect of filling materials on the microstructure and properties of hybrid laser welded Al-Mg-Si alloys joints

Highlights: • A serious comparison was made on the hybrid laser welded AA6061-T6 joint with different filling materials. • The microstructure of the welded joint was characterized using EBSD and SEM. • A strength model was successfully built to predict the strength of the hybrid laser welded AA6061-t6 joint. • The study shed new insights on how to select appropriate filling materials when using hybrid laser welding. - Abstract: A serious investigation was conducted to examine the influence of filling materials on the microstructure and properties of hybrid laser welded AA6061-T6 joints. The results of the tensile tests showed that the welded joint with ER4043 filling materials had higher tensile strength than that with ER5356 filling material. Based on the results obtained a strength model was built to predict and explain the enhancement of the yield strength of the hybrid laser welded AA6061-T6 joint with different welding wires. In contrast to the tensile strength, the ER4043 joint showed lower fatigue strength than that of the ER5356 joint due to extensive presence of micropores in fusion zone. Further, the corrosion experiment illustrated that the ER4043 joint had poorer resistance to the corrosive attack under 3.5% NaCl solution. A summary was made on the performance of both welded joints to shed new insights on selecting appropriate filling materials when welding AA6061-T6 by hybrid laser welding method.

36 MATERIALS SCIENCE↗

Microstructure evolution and mechanical properties of Cu/Sn/Ag TLP-bonded joint during thermal aging

Highlights: • The thermal reliability of the Cu/Sn/Ag TLP-bonded joint was investigated through high-temperature storage. • A diffusion reaction occurred at the interface between Cu{sub 3}Sn and Ag{sub 3}Sn during thermal aging. • The mechanism of the Cu{sub 3}Sn/Ag{sub 3}Sn interfacial reaction was investigated from thermodynamics and kinetics. - Abstract: Low-temperature transient liquid phase (TLP) bonding is a promising joining technology for high-temperature electronic devices packaging. However, the effect of thermal aging on the joint microstructure and performance has been rarely studied so far. In this paper, the relationship between microstructural evolution and mechanical property was developed for the Cu/Sn/Ag TLP-bonded joint during 350 °C aging. Experimental results show that an interfacial reaction occurs between the intermetallic compounds (IMCs) of Cu{sub 3}Sn and Ag{sub 3}Sn, which induces that a great amount of Cu{sub 3}Sn particles or wedges embed into the Ag-Sn phase layer. The reaction process is controlled by a volume diffusion of Cu elements from the Cu substrate, and capable of promoting the transformation from Ag{sub 3}Sn into Ag(Sn) solid solution. Cu{sub 41}Sn{sub 11} phase can be formed at the expense of Cu{sub 3}Sn and Cu, of which transformation process is completely achieved after aging for 480 h, and the Cu(Sn) solid solution intimately contacts with the opposite Ag(Sn) solid solution in many areas after aging for 960 h. The joint mechanical property initially declines due to the formation of Cu{sub 41}Sn{sub 11} phase and Cu-Sn IMCs grain coarsening, and then increases because of the complete depletion of Cu{sub 3}Sn and substantial precipitation of Cu(Sn) solid solution. After aging for nearly 1000 h, the joint still maintains a high shear strength of >40 MPa, indicating an excellent thermal reliability.

36 MATERIALS SCIENCE↗

Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy

Highlights: • The complex solidification pattern during Laser Powder Bed Fusion of Al10SiMg alloy is explained. • The evolution of α-Al cellular network, grain structure and texture development is characterized. • The grain structure is shown to be columnar throughout the printed sample • The grains’ orientation align with that of the α-Al cells. • The size evolution of α-Al cells and grains within the scan tracks follow opposite patterns. • Utilizing of a 67° hatch angle enhances densification and promotes a more isotropically developed texture across the build. - Abstract: A comprehensive analysis of solidification patterns and microstructural development is presented for an Al10SiMg sample produced by Laser Powder Bed Fusion (LPBF). Utilizing a novel scanning strategy that involves counter-clockwise rotation of the scan vector by 67° upon completion of each layer, a relatively randomized cusp-like pattern of protruding/overlapping scan tracks has been produced along the build direction. We show that such a distribution of scan tracks, as well as enhancing densification during LPBF, reduces the overall crystallographic texture in the sample, as opposed to those normally achieved by commonly-used bidirectional or island-based scanning regimes with 90° rotation. It is shown that, under directional solidification conditions present in LPBF, the grain structure is strictly columnar throughout the sample and that the grains' orientation aligns well with that of the α-Al cells. The size evolution of cells and grains within the melt pools, however, is shown to follow opposite patterns. The cells'/grains' size distribution and texture in the sample are explained via use of analytical models of cellular solidification as well as the overall heat flow direction and local solidification conditions in relation to the LPBF processing conditions. Such a knowledge of the mechanisms upon which microstructural features evolve throughout a complex solidification process is critical for process optimization and control of mechanical properties in LPBF.

36 MATERIALS SCIENCE↗

Comparative study of Sc and Er addition on microstructure, mechanical properties, and electrical conductivity of Al-0.2Zr-based alloy cables

Highlights: • The comprehensive properties of Al-0.2Zr-0.1Sc were better than those of Al-0.2Zr-0.1Er alloy cable. • The microstructures evolved from fibrous grains to equiaxed grains with increasing annealing time. • The Zener drag force increased with increasing ratio of volume fraction (F{sub V}) to average diameter F{sub V}/ d-bar . • The capability to inhibit recrystallization was as follows: Al{sub 3}(Zr, Sc) > Al{sub 3}(Zr, Er) > Al{sub 3}Zr. - Abstract: The effect of the addition of 0.1 wt% Sc and 0.1 wt% Er on the deformation microstructure, Vickers microhardness, and electrical conductivity of Al-0.2 wt% Zr-based alloy cables annealed at 400 °C for different times was investigated. The comprehensive properties of Al-0.2Zr-0.1Sc were better than those of Al-0.2Zr-0.1Er. The optimal conditions for the Al-0.2Zr-01Sc alloy cable were a microhardness of 575 MPa, an electrical conductivity of 34.5 MS/m for an annealing time of 36 h, and those for the Al-0.2Zr-0.1Er alloy cable were a microhardness of 550 MPa, an electrical conductivity of 33.6 MS/m for an annealing time of 8 h. During the annealing process, dispersed Al{sub 3}(Zr,Sc/Er) precipitates were generated, which substantially impeded recrystallization by Zener pining of grain boundaries. Based on the ratio of volume fraction (F{sub V}) to average diameter ( d-bar ) of the precipitates, their capability to inhibit recrystallization was as follows: Al{sub 3}(Zr, Sc) > Al{sub 3}(Zr, Er) > Al{sub 3}Zr. Moreover, the electrical conductivity of Al-0.2Zr-0.1Sc was better than that of Al-0.2Zr-0.1Er, probably because Sc could better inhibit recrystallization than Er, leading to fewer grain boundaries and hence lesser electron scattering.

36 MATERIALS SCIENCE↗

The effect of boron addition on the deformation behavior and microstructure of β-solidify TiAl alloys

Highlights: • Borides could promote the DRX formation to soften TiAl alloys. • Boron addition increases firstly and then stabilizes the deformation activate energy. • The stable region expands with boron increasing in processing maps. • The DRX critical strain increases firstly and then decreases with boron increasing. • DRX softening and strengthening from solid solution and borides influence deformation behavior. - Abstract: The effect of boron addition on the deformation behavior and microstructure of Ti-43Al-6Nb-1Mo -1Cr alloys have been studied in this paper. Boron addition would induce Ti{sub 2}Al(P6{sub 3}/mmc) phase with hexagonal structure formation on the interfaces between TiB and γ phase. TiB would be the obstacles for dislocations slipping and increase the stacking fault energy. Ti{sub 2}Al could also provide the chemical foundation for DRXed γ nucleation and disappear after thermal deformation. Both these two phase could promote DRXed grains nucleation to soften the alloys during thermal deformation. With the strengthen effect of boron solid solution and TiB obstacles, the microstructure evolution, phase transformation and deformation behavior are also discussed and concluded as follow.

36 MATERIALS SCIENCE↗

Microstructure characterization and thermal stability of TC11/Ti2AlNb joints during thermal exposure

Highlights: • Mechanical properties of TC11/Ti{sub 2}AlNb deteriorate due to coarsening of O and α{sub s}. • Thermal stability of α{sub s} phase is lower than that of O phase during exposure. • A relationship was found between the reduction of area and phase thickness. - Abstract: TC11/Ti{sub 2}AlNb welding joints undergoing hot deformation were thermally exposed at the range of 500–700 °C for 100, 200 and 500 h. In present research, typical microstructures of five different zones of the joints were investigated, fusion zone, two interfaces and two base alloys included. The microstructures of fusion zone, Ti{sub 2}AlNb-based alloy and the interface between them were characterized by the coarsening of O phase during thermal exposure, while those of TC11 alloy and the interface between it and fusion zone featured the coarsening of α{sub s} phase. The transformation from B2 to β and O phase was stifled below 600 °C and Ti{sub 2}AlNb-based alloy thus was verified to be stable at this temperature range. α{sub s} phase was stable during exposure at 500 °C. When exposed above 600 °C, α{sub s} phase coarsened by at least 52% with the extension of holding time. Due to the low thermal stability of α{sub s} phase compared with that of O phase, the fracture position of the samples tested at room temperature moved from fusion zone to TC11 alloy when temperature rose. In spite of different thermal exposure conditions, the samples tested at 300 and 500 °C all fractured at TC11 alloy for the severe coarsening of α{sub s} phase. The decrease of interfacial area resulting from the coarsening of O and α{sub s} phases facilitated the dislocation slipping and the strength of joints thus deteriorated. The mechanical properties of TC11/Ti{sub 2}AlNb joints measured at room temperature, 300 and 500 °C were all correlated with the lamellar thickness of O and α{sub s} phases.

36 MATERIALS SCIENCE↗