Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observer Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Near-Sun Observations of an F-Corona Decrease and K-Corona Fine Structures

Remote observations of the solar photospheric light scattered by electrons (K-corona) and dust (F-corona/Zodiacal light) have been made from the ground during eclipses and from space at 1 AU and as close as 0.3 AU. Previous observations of dust scattering have not confirmed the existence of a theoretically-predicted dust free zone near the Sun. The transient nature of the corona has been well characterized for large events, but questions still remain (e.g. initiation, production of solar energetic particles) and for small events even the structure is uncertain. Here we report on imaging the solar corona, from the Parker Solar Probe spacecraft, during the first two perihelion passes (0.16-0.25 AU), each of ten days duration. The view from these distances is qualitatively similar to the historical view, but there are some significant differences in the details. We have uncovered at short elongations a decrease in the intensity of the F-coronal intensity, which is suggestive of the long-sought dust free zone. Also we have resolved the plasma structure of very small eruptions, which are being frequently ejected from the Sun. They take two forms - the commonly observed magnetic flux ropes or the predicted, but not yet observed, magnetic islands arising from the tearing mode instability in the current sheet. Our observations of the coronal streamer evolution confirm the large-scale topology of the solar corona, but they also reveal that, as recently predicted, streamers are composed of yet smaller sub-streamers channeling continual density fluctuations at all visible scales.

Astronomy and astrophysics↗

Magnetic Control of Soft Chiral Phonons in PbTe

We report PbTe crystals have a soft transverse optical phonon mode in the terahertz frequency range, which is known to efficiently decay into heat-carrying acoustic phonons, resulting in anomalously low thermal conductivity. Here, we studied this phonon via polarization-dependent terahertz spectroscopy. We observed softening of this mode with decreasing temperature, indicative of incipient ferroelectricity, which we explain through a model including strong anharmonicity with a quartic displacement term. In magnetic fields up to 25 T, the phonon mode splits into two modes with opposite handedness, exhibiting circular dichroism. Their frequencies display Zeeman splitting together with an overall diamagnetic shift with increasing magnetic field. Using a group-theoretical approach, we demonstrate that these observations are the result of magnetic field-induced morphic changes in the crystal symmetries through the Lorentz force exerted on the lattice ions. Thus, our Letter reveals a novel process of controlling phonon properties in a soft ionic lattice by a strong magnetic field.

36 MATERIALS SCIENCE↗

System Study: Residual Heat Removal 1998-2014

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and post-trip shutdown-cooling) at 104 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2014 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10 year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing trends were identified in the RHR results. A highly statistically significant decreasing trend was observed for the RHR injection mode start-only unreliability. Statistically significant decreasing trends were observed for RHR shutdown cooling mode start-only unreliability and RHR shutdown cooling model 24-hour unreliability.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluation of Cloud-resolving and Limited Area Model Intercomparison Simulations using TWP-ICE Observations. Part 1: Deep Convective Updraft Properties

Ten 3D cloud-resolving model (CRM) simulations and four 3D limited area model (LAM) simulations of an intense mesoscale convective system observed on January 23-24, 2006 during the Tropical Warm Pool – International Cloud Experiment (TWP-ICE) are compared with each other and with observed radar reflectivity fields and dual-Doppler retrievals of vertical wind speeds in an attempt to explain published results showing a high bias in simulated convective radar reflectivity aloft. This high bias results from ice water content being large, which is a product of large, strong convective updrafts, although hydrometeor size distribution assumptions modulate the size of this bias. Snow reflectivity can exceed 40 dBZ in a two-moment scheme when a constant bulk density of 100 kg m-3 is used. Making snow mass more realistically proportional to area rather than volume should somewhat alleviate this problem. Graupel, unlike snow, produces high biased reflectivity in all simulations. This is associated with large amounts of liquid water above the freezing level in updraft cores. Peak vertical velocities in deep convective updrafts are greater than dual-Doppler retrieved values, especially in the upper troposphere. Freezing of large rainwater contents lofted above the freezing level in simulated updraft cores greatly contributes to these excessive upper tropospheric vertical velocities. Strong simulated updraft cores are nearly undiluted, with some showing supercell characteristics. Decreasing horizontal grid spacing from 900 meters to 100 meters weakens strong updrafts, but not enough to match observational retrievals. Therefore, overly intense simulated updrafts may partly be a product of interactions between convective dynamics, parameterized microphysics, and large-scale environmental biases that promote different convective modes and strengths than observed.

clould-resolving↗

Edge localized mode rotation and the nonlinear dynamics of filaments

Edge Localized Modes (ELMs) rotating precursors were reported few milliseconds before an ELM crash in several tokamak experiments. Also, the reversal of the filaments rotation at the ELM crash is commonly observed. In this article, we present a mathematical model that reproduces the rotation of the ELM precursors as well as the reversal of the filaments rotation at the ELM crash. Linear ballooning theory is used to establish a formula estimating the rotation velocity of ELM precursors. The linear study together with nonlinear magnetohydrodynamic simulations give an explanation to the rotations observed experimentally. Unstable ballooning modes, localized at the pedestal, grow and rotate in the electron diamagnetic direction in the laboratory reference frame. Approaching the ELM crash, this rotation decreases corresponding to the moment when the magnetic reconnection occurs. During the highly nonlinear ELM crash, the ELM filaments are cut from the main plasma due to the strong sheared mean flow that is nonlinearly generated via the Maxwell stress tensor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Core impurity transport in Alcator C-Mod L-, I- and H-mode plasmas

Core impurity transport has been reviewed for a variety of confinement regimes in Alcator C-Mod plasmas from x-ray emission following injection of medium and high Z materials. In ohmic L-mode discharges, impurity transport is anomalous (D eff $\gg$ D nc ) and changes very little across the LOC/SOC boundary. In ion cyclotron range of frequencies (ICRF) heated L-mode plasmas, the core impurity confinement time decreases with increasing ICRF input power (and subsequent increasing electron temperature) and increases with plasma current. Nearly identical impurity confinement characteristics are observed in I-mode plasmas. In enhanced D α H-mode discharges the core impurity confinement times are much longer. There is a strong connection between core impurity confinement time and the edge density gradient across all confinement regimes studied here. Deduced central impurity density profiles in stationary plasmas are generally flat, in spite of large amplitude sawtooth oscillations, and there is little instance of impurity convection inside of r/a = 0.3 when averaged over sawteeth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron beam injection experiments - The beam-plasma discharge at low pressures and magnetic field strengths

The paper describes electron beam injection experiments which clarify observational results obtained in rocket flights. A column of enhanced density plasma, exceeding the density expected from ionization by primary beam electrons, was observed in a large vacuum system at low magnetic fields (1 to 1.5 G) and low ambient pressures (10 to the minus 6 to 10 to the minus 5 torr). The peak luminosity of the discharge was about 10 times that of the beam alone, and the radius increased by a factor of three. In the absence of the discharge, RF emission is observed at 1.1 to 1.2 times the cyclotron frequency, and a strong band of RF noise with upper frequency cutoff at about the cyclotron frequency is observed in the discharge mode, along with higher frequency noise at or near the plasma frequency. The onset of the plasma discharge is critically dependent on beam current. The described results agree with observations obtained at much higher densities and magnetic fields in fusion research studies.

Bernstein, W.↗

Numerical and experimental investigation of the bending response of thin-walled composite cylinders

A numerical and experimental investigation of the bending behavior of six eight-ply graphite-epoxy circular cylinders is presented. Bending is induced by applying a known end-rotation to each end of the cylinders, analogous to a beam in bending. The cylinders have a nominal radius of 6 inches, a length-to-radius ratio of 2 and 5, and a radius-to-thickness ratio of approximately 160. A (+/- 45/0/90)S quasi-isotropic layup and two orthotropic layups, (+/- 45/0 sub 2)S and (+/- 45/90 sub 2)S, are studied. A geometrically nonlinear special-purpose analysis, based on Donnell's nonlinear shell equations, is developed to study the prebuckling responses and gain insight into the effects of non-ideal boundary conditions and initial geometric imperfections. A geometrically nonlinear finite element analysis is utilized to compare with the prebuckling solutions of the special-purpose analysis and to study the buckling and post buckling responses of both geometrically perfect and imperfect cylinders. The imperfect cylinder geometries are represented by an analytical approximation of the measured shape imperfections. Extensive experimental data are obtained from quasi-static tests of the cylinders using a test fixture specifically designed for the present investigation. A description of the test fixture is included. The experimental data are compared to predictions for both perfect and imperfect cylinder geometries. Prebuckling results are presented in the form of displacement and strain profiles. Buckling end-rotations, moments, and strains are reported, and predicted mode shapes are presented. Observed and predicted moment vs. end-rotation relations, deflection patterns, and strain profiles are illustrated for the post buckling responses. It is found that a geometrically nonlinear boundary layer behavior characterizes the prebuckling responses. The boundary layer behavior is sensitive to laminate orthotropy, cylinder geometry, initial geometric imperfections, applied end-rotation, and non-ideal boundary conditions. Buckling end-rotations, strains, and moments are influenced by laminate orthotropy and initial geometric imperfections. Measured buckling results correlate well with predictions for the geometrically imperfect specimens. The postbuckling analyses predict equilibrium paths with a number of scallop-shaped branches that correspond to unique deflection patterns. The observed postbuckling deflection patterns and measured strain profiles show striking similarities to the predictions in some cases. Ultimate failure of the cylinders is attributed to an interlaminar shear failure mode along the nodal lines of the postbuckling deflection patterns.

Fuchs, J. P.↗

Flying Beyond Flutter with the X-56A Aircraft

The National Aeronautics and Space Administration X-56A Multi-Utility Technology Testbed was successfully flown beyond flutter using active feedback control methods. This report discusses the flight-test methods used during envelope expansion and presents the data collected. The frequency and damping of rigid-body flight dynamic modes and the first two structural modes were estimated from the flight data. The flutter mechanism (body freedom flutter) was found to match predictions with coupling occurring between the short period and the first symmetric wing bending mode. Flights up to the instability threshold and beyond were conducted using active feedback control. Several tests were conducted in flight where the control system was disabled momentarily to observe the unstable flutter mode and then reengaged; thus, demonstrating active suppression.

Jacob Schaefer↗

Minimizing analyte electrolysis in electrospray ionization mass spectrometry using a redox buffer coated emitter electrode

An emitter electrode with an electroactive poly(pyrrole) (PPy) polymer film coating was constructed for use in electrospray ionization mass spectrometry (ESI-MS). The PPy film acted as a surface-attached redox buffer limiting the interfacial potential of the emitter electrode. While extensive oxidation of selected analytes (reserpine and amodiaquine) was observed in positive ion mode ESI using a bare metal (gold) emitter electrode, the oxidation was suppressed for these same analytes when using the PPy-coated electrode. A semi-quantitative relationship between the rate of oxidation observed and the interfacial potential of the emitter electrode was shown. The redox buffer capacity, and therefore the lifetime of the redox buffering effect, correlated with the oxidation potential of the analyte and with the magnitude of the film charge capacity. Online reduction of the PPy polymer layer using negative ion mode ESI between analyte injections was shown to successfully restore the redox buffering capacity of the polymer film to its initial state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electromagnetic beam modes driven by anisotropic electron streams

A theory is presented which provides an explanation for recent laboratory observations of a 'new electromagnetic' mode in a non-Maxwellian high-beta plasma' and suggests a likely relevance of these modes to space plasmas. Unstable parallel-propagating waves, which can be beam modes or whistlers, depending mainly on the degree of velocity anisotropy in a weak electron beam, are found. In the beam-mode limit relevant to the experiment, this is a kinetic Weibel instability, enhanced by a parallel magnetic field. The frequency of the mode can be above or below the electron cyclotron frequency.

Goldman, Martin V.↗

The theoretical study on intermittency and propagation of geodesic acoustic mode in L-mode discharge near tokamak edge

Abstract Through a systematically developed theory, we demonstrate that the motion of Instanton identified in Zhang et al (2017 Phys. Plasmas 24 122304) is highly correlated to the intermittent excitation and propagation of geodesic acoustic mode (GAM) that is observed in tokamaks. While many numerical simulations have observed the phenomena, it is the first theory that reveals the physical mechanism behind GAM intermittent excitation and propagation. The preceding work is based on the micro-turbulence associated with toroidal ion temperature gradient mode, and slab-based phenomenological model of zonal flow. When full toroidal effect is introduced into the system, two branches of zonal flow emerge: the torus-modified low frequency zonal flow (TLFZF), and GAM, necessitating a unified exploration of GAM and TLFZF. Indeed, we observe that the transition from the Caviton to Instanton is triggered by a rapid zero-crossing of radial group velocity of drift wave and is found to be strongly correlated with the GAM onset. Many features peculiar to intermittent GAMs, observed in real machines, are thus identified in the numerical experiment. The results will be displayed in figures and in a movie; first for single central rational surface, and then with coupled multiple central rational surfaces. The periodic bursting first shown disappears as being replaced by irregular one, more similar to the intermittent characteristics observed in GAM experiments.

Physics↗

Flux-driven algebraic damping of m = 1 diocotron mode

Recent experiments with pure electron plasmas in a Malmberg–Penning trap have observed the algebraic damping of m = 1 diocotron modes. Transport due to small field asymmetries produces a low density halo of electrons moving radially outward from the plasma core, and the mode damping begins when the halo reaches the resonant radius r = R{sub w} at the wall of the trap. The damping rate is proportional to the flux of halo particles through the resonant layer. The damping is related to, but distinct from, spatial Landau damping, in which a linear wave-particle resonance produces exponential damping. This paper explains with analytic theory the new algebraic damping due to particle transport by both mobility and diffusion. As electrons are swept around the “cat's eye” orbits of the resonant wave-particle interaction, they form a dipole (m = 1) density distribution. From this distribution, the electric field component perpendicular to the core displacement produces E × B-drift of the core back to the axis, that is, damps the m = 1 mode. The parallel component produces drift in the azimuthal direction, that is, causes a shift in the mode frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving BC Mixing State and CCN Activity Representation With Machine Learning in the Community Atmosphere Model Version 6 (CAM6)

Abstract Representing mixing state of black carbon (BC) is challenging for global climate models (GCMs). The Community Atmosphere Model version 6 (CAM6) with the four‐mode version of the Modal Aerosol Module (MAM4) represents aerosols as fully internal mixtures with uniform composition within each aerosol mode, resulting in high degree of internal mixing of BC with non‐BC species and large mass ratio of coating to BC ( R BC , the mass ratio of non‐BC species to BC in BC‐containing particles). To improve BC mixing state representation, we coupled a machine learning (ML) model of BC mixing state index trained on particle‐resolved simulations to the CAM6 with MAM4 (MAM4‐ML). In MAM4‐ML, we use R BC to partition accumulation mode particles into two new modes, BC‐free particles and BC‐containing particles. We adjust R BC to make the modeled BC mixing state index ( χ mode ) match the one predicted by the ML model ( χ ML ). On a global average, the mass fraction of BC‐containing particles in accumulation mode decreases from 100% (MAM4‐default) to 48% (MAM4‐ML). The globally averaged χ mode decreases from 78% (MAM4‐default) to 63% (MAM4‐ML, 19% reduction) and agrees well with χ ML (66%). The R BC decreases by 52% for accumulation mode and better agrees with observations. The hygroscopicity drops by 9% for BC‐containing particles in accumulation mode, leading to a 20% reduction in the BC activation fraction. The surface BC concentration increases most (6.9%) in the Arctic, and the BC burden increases by 4%, globally. Our study highlights the application of the ML model for improving key aerosol processes in GCMs.

Meteorology & Atmospheric Sciences↗

Superstrong coupling of thin film magnetostatic waves with microwave cavity

We experimentally demonstrated the strong coupling between a microwave cavity and standing magnetostatic magnon modes in a yttrium iron garnet film. Such strong coupling can be observed for various spin wave modes under different magnetic field bias configurations, with a coupling strength inversely proportional to the transverse mode number. A comb-like spectrum can be obtained from these high order modes. The collectively enhanced magnon-microwave photon coupling strength is comparable with the magnon free spectral range and therefore leads to the superstrong coupling regime. Our findings pave the road towards designing a new type of strongly hybridized magnon-photon system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase detection of spin waves in yttrium iron garnet and metal induced nonreciprocity

Herein we report experiments which characterize spin wave propagation in a thin (111) yttrium iron garnet film for arbitrary angles between the in-plane magnetic field and the mode wavevectors. By measuring the magnetic field evolution of the phase of the wave traveling across the film, we deduce the frequency dependence of the wavevector, the dispersion relation, from which the mode velocity follows. Additionally, we observe multiple nodes in the regime of the propagating Damon-Eshbach mode; these arise from avoided crossings associated with the higher, exchange split, standing wave modes along the film normal, the positions of which correlate with the direct absorption measurements of their positions. This information allows a determination of the exchange parameter. Using this technique, we examine the nonreciprocity in spin wave propagation that results from an adjacent metal layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dark radiation from particle decay: cosmological constraints and opportunities

We study particle decay as the origin of dark radiation. After elaborating general properties and useful parametrisations we provide model-independent and easy-to-use constraints from nucleosynthesis, the cosmic microwave background and structure formation. Bounds on branching ratios and mass hierarchies depend in a unique way on the time of decay. We demonstrate their power to exclude well-motivated scenarios taking the example of the lightest ordinary sparticle decaying into the gravitino. We point out signatures and opportunities in cosmological observations and structure formation. For example, if there are two dark decay modes, dark radiation and the observed dark matter with adjustable free-streaming can originate from the same decaying particle, solving small-scale problems of structure formation. Hot dark matter mimicking a neutrino mass scale as deduced from cosmological observations can arise and possibly be distinguished after a discovery. Our results can be used as a guideline for model building.

79 ASTRONOMY AND ASTROPHYSICS↗

Close-up analysis of aircraft ice accretion

Various types of ice formation have been studied by analysis of high magnification video observations. All testing was conducted in the NASA Lewis Icing Research Tunnel (IRT). A faired 8.9 cm (3.5 in.) diameter metal-clad cylinder and a 5.1 (2 in.) aluminum cylinder were observed by close-up and overview video cameras for several wind tunnel conditions. These included close-up grazing angle, close-up side view, as well as overhead and side overview cameras. Still photographs were taken at the end of each spray along with tracings of the subsequent ice shape. While in earlier tests only the stagnation region was observed, the entire area from the stagnation line to the horn region of glaze ice shapes was observed in this test. The modes or horn formation have been identified within the range of conditions observed. In the horn region, Horn Type A ice is formed by 'dry' feather growth into the flow direction and Horn Type B is formed by a 'wet' growth normal to the surface. The feather growth occurs when the freezing fraction is near unity and roughness elements exist to provide an initial growth site.

Hansman, R. John↗