Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

W-ZrC composites prepared by reactive melt infiltration of Zr 2 Cu alloy into binder jet 3D printed WC preforms

W-ZrC composites were successfully prepared by reactive melt infiltration (RMI) of stoichiometric and excess amounts of Zr 2 Cu into sintered and un-sintered WC preforms made from binder jet 3D printing. The focus of this work was to study the conversion of reactant powders and liquid infiltrant with varying preform density and infiltrant amount by controlling the processing time to reach high conversion yield while understanding the phase composition, microstructure, and hardness. To investigate the effect of time, the reactive melt infiltration was conducted at 1400 °C for 2, 4 and 8 h in a furnace with 96% Ar - 4% H2 gas atmosphere. The increase in reaction time from 2 to 8 h increased the W and W 2 C phase contents and decreased the ZrC phase content when using sintered WC preforms. Samples prepared from un-sintered WC preforms exhibited improved reactive melt infiltration compared to sintered samples, and there was no detectable W 2 C phase and nearly full consumption of WC. Similar to sintered WC samples, the content of W and ZrC phases increased with the increase in time from 2 to 8 h. The interfaces and phases at reaction interfaces were investigated using electron diffraction analysis and S/TEM-EDS to understand material stability; the phases were identified and consistent with XRD analysis. Additionally, there was no Cu present at the interfaces. Increasing the amount of infiltrant led to better reactive melt infiltration. In general, the hardness increased with reaction time and the highest Vickers hardness was found in the W-ZrC sample formed from sintered WC reacted with excess Zr 2 Cu. Finally, this research addresses the critical comparison of sintering and RMI time and shows that by using un-sintered samples for 8 h we are able to achieve W-ZrC composites with fewer undesired phases.

36 MATERIALS SCIENCE↗

Directly obtained τ-phase MnAl, a high performance magnetic material for permanent magnets

The metastable tetragonal τ-phase has been directly obtained from casting Mn{sub 0.54}Al{sub 0.46} and (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} using the drop synthesis method. The as-casted samples were ball milled to decrease the particle size and relaxed at 500 °C for 1 h. The phase composition, crystallographic parameters, magnetic properties and microstructure were systematically studied. The results reveal that the τ-phase could be directly obtained from drop synthesis. The highest M{sub s} of 117 emu/g was achieved in the (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} where the τ-phase was stabilized by doping with carbon. Carbon doping increased the c/a ratio of the τ-phase as it occupies specific interstitial positions (½, ½, 0) in the structure. Furthermore, ball milling increases the coercivity (H{sub c}) at the expense of a decrease in magnetic saturation (M{sub s}). The increase in coercivity is explained by a decrease of grain size in conjunction with domain wall pinning due to defects introduced during the ball milling process. - Graphical abstract: The tetragonal τ-phase has been directly obtained from casting Mn{sub 0.54}Al{sub 0.46} and (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} using the drop synthesis method. The phase composition, crystallographic parameters, magnetic properties and microstructure were systematically studied. The highest M{sub s} of 117 emu/g was achieved for (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} ball milling increases the coercivity (H{sub c}) at the expense of a decrease in magnetic saturation (M{sub s}). - Highlights: • The ferromagnetic τ-phase has been directly obtained from casting. • The highest M{sub s} of 117 emu/g was achieved for (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2}. • Ball milling increases the coercivity but decreases the magnetic saturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entropy-driven melting point depression in fcc HEAs

High Entropy Alloys (HEAs) are an increasingly dominant alloy design paradigm. The premise of entropic stabilization of single-phase alloys has motivated much of the research on HEAs. Chemical complexity may indeed help stabilize single alloy phases relative to other lower-entropy competing solid phases. Paradoxically, this complexity may de-stabilize these alloys against the liquid phase, potentially limiting the application space of HEAs at elevated temperatures. In this work, we carry out a comprehensive investigation of the phase stability in the fcc CoCrFeMnNiV-Al HEA space using a state of the art CALPHAD database. By using modern visualization techniques and statistical analysis we examine the trade-off between chemical complexity and stability against the liquid state and identify a potentially difficult to overcome barrier for development of high temperature alloys, at least within the conventional fcc HEA space. Here, limited experimental data seem to be consistent with this analysis.

36 MATERIALS SCIENCE↗

Automated design and optimization of flexible booster autopilots via linear programming. Volume 2: User's manual

COEBRA, the Computerized Optimization of Elastic Booster Autopilots, is an autopilot design program. The bulk of the design criteria is presented in the form of minimum allowed gain/phase stability margins. COEBRA has two optimization phases: (1) a phase to maximize stability margins; and (2) a phase to optimize structural bending moment load relief capability in the presence of minimum requirements on gain/phase stability margins.

Hauser, F. D.↗

First principle prediction of half-metallic ferromagnetism above room temperature in half-heusler alloys

A first principle study of half-metallicity and ferromagnetism in half-heusler alloys NiMnZ (Z = Si, P, Ge, As, and Sb) is given. The half-metallicity and ferromagnetism are predicted via the calculation of electronic structure, and Curie temperature. The stability of the orthorhombic and tetragonal structures and C1{sub b} at various values of lattice parameters is also studied by means of the pseudo-potential method. All alloys exhibit the half-metallicity and ferromagnetism above room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, characterization and thermochemistry of Cs-, Rb- and Sr-substituted barium aluminium titanate hollandites

Titanate hollandites are of considerable interest for immobilization of radioactive Cs, its daughter product Ba and related radionuclides Rb and Sr. In this work, we synthesized three hollandites, Ba 1.18 Cs 0.21 Al 2.44 Ti 5.53 O 16 , Ba 1.17 Rb 0.19 Al 2.46 Ti 5.53 O 16 and Ba 1.14 Sr 0.10 Al 2.38 Ti 5.59 O 16 , using sol–gel methods. Rietveld analysis of synchrotron XRD data shows that they adopt the tetragonal structure (space group I4/m ), and their cell parameters increase with increasing cation size (Sr 2+ → Rb + → Cs + ). Standard enthalpies of formation of these hollandites were determined from drop solution calorimetric measurements with lead borate as the solvent at 973 K. Their formation enthalpies are similar, consistent with the occurrence of extensive cation substitutions in hollandites. Further energetic analysis with respect to BaTiO 3 and SrTiO 3 perovskites and other oxides reveals decreased thermodynamic stability from Cs- to Rb- to Sr-hollandite. Lastly, this trend is consistent with the phase assemblage observed in Synroc, where Cs + , Rb + and Ba 2+ enter into hollandite, whereas Sr 2+ occurs in perovskite.

36 MATERIALS SCIENCE↗

La-driven morphotropic phase boundary in the Bi(Zn1/2Ti1/2)O3-La(Zn1/2Ti1/2)O3-PbTiO3 solid solution

We explore the Bi(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-La(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-PbTiO$_3$ pseudoternary phase diagram using density functional theory and a solid solution model. We find a region of stability against phase segregation that contains a morphotropic phase boundary. Based on the results we identify a ferroelectrically active composition region that is likely to show strong electro-mechanical response. Furthermore, we find that La replacement for Bi not only lowers the polarization as might be expected, but also shifts the balance from tetragonality towards rhombohedral distortions. This may be of general use in modifying phase diagrams of $A$-site driven perovskite ferroelectric solid solutions to generate new morphotropic phase boundary systems.

Cooper, Valentino R↗

ELECTROCHEMICAL IMPEDANCE ANALYSIS OF beta-TITANIUM ALLOYS AS IMPLANTS IN RINGERS LACTATE SOLUTION

Commercially pure titanium and two beta-titanium alloys, TNZT and TMZF, have been characterized using various electrochemical techniques for their corrosion behavior in Ringers lactate solution. The variation of corrosion potential and solution pH with time has been discussed. Electrochemical Impedance Spectroscopy has been used to fit the results into a circuit model. The stability of the oxides formed on the surface of these alloys has been correlated with impedance phase angles. Cyclic Potentiodynamic Polarization has been used to compute the corrosion parameters for the alloys. TMZF is found to be a better beta-alloy as compared to TNZT.

36 MATERIALS SCIENCE↗

Nonlocal Finite-Depth Circuits for Constructing Symmetry-Protected Topological States and Quantum Cellular Automata

Whether a given target state can be prepared by starting with a simple product state and acting with a finite-depth quantum circuit is a key question in condensed matter physics and quantum information science. It underpins classifications of topological phases, as well as the understanding of topological quantum codes, and has obvious relevance for device implementations. Traditionally, this question assumes that the quantum circuit is made up of unitary gates that are . Inspired by the advent of noisy intermediate-scale quantum devices, we reconsider this question with k - gates, i.e., gates that act on no more than k degrees of freedom but are not restricted to be geometrically local. First, we construct explicit finite-depth circuits of symmetric k -local gates that create symmetry-protected topological (SPT) states from an initial product state. Our construction applies to SPT states protected by global symmetries or subsystem symmetries but not to those with higher-form symmetries, which we conjecture remain nontrivial. Next, we show how to implement arbitrary translationally invariant quantum cellular automata in any dimension using finite-depth circuits of k -local gates. These results imply that the topological classifications of SPT phases and quantum cellular automata both collapse to a single trivial phase in the presence of k -local interactions. We furthermore argue that SPT phases are fragile to k -local symmetric perturbations. We conclude by discussing the implications for other phases, such as fracton phases, and surveying future directions. Our analysis opens a new experimentally motivated conceptual direction examining the stability of phases and the feasibility of state preparation without the assumption of geometric locality. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of Stability Diagram at IOTA at Fermilab

Nonlinear focusing elements can enhance the stability of particle beams in high-energy colliders by means of Landau Damping, through the tune spread which is introduced. We propose an experiment at Fermilab’s Integrable Optics Test Accelerator (IOTA) to investigate the influence of nonlinear focusing elements on the transverse stability of the beam. In this experiment, we employ an anti-damper, an active transverse feedback system, as a controlled mechanism to induce coherent beam instability. By utilizing the anti-damper, we can examine the impact of the nonlinear focusing element on the beam’s transverse stability. The stability diagram, a tool used to determine the system’s stability, will be measured using a recently demonstrated method at the LHC. This measurement is carried out experimentally by selecting specific threshold gains and measuring them for a range of phases. The stability diagram is represented by gei¿ on the complex plane. The experiment at IOTA adds insight towards the stability diagram measurement method by supplying a reduced machine impedance, to investigate the impedance’s effect on the stability diagram, as well as a larger range of phase measurements.

43 PARTICLE ACCELERATORS↗

Perfection in Nucleation and Growth of Blue-Phase Single Crystals: Small Free-Energy Required to Self-Assemble at Specific Lattice Orientation

Chemically patterned surfaces can be used to selectively stabilize blue phases as macroscopic single crystals with a prescribed lattice orientation. By tailoring the interfacial free energy through the pattern characteristics, it is possible to set, with nanoscale precision, the optimal conditions to induce spontaneously blue-phase crystal nucleation on the patterned substrate where a uniform, defect-free, blue-phase single crystal is finally formed in a matter of seconds. The chemical patterns taken into consideration in this work are made up of alternated stripelike regions of homeotropic and planar anchoring. By varying the stripe pattern dimension, including the period and ratio of the planar/homeotropic anchoring width, it is possible to generate blue-phase I single crystals with (110) lattice orientation and blue-phase II single crystals with either the (100), (110), or (111) lattice orientation. Continuum mean-field calculations of the studied systems serve to explain, in terms of the free energy of the systems, how the pattern dimensions favor certain crystallographic orientations while penalizing the others. We found that a small free-energy difference is sufficient to drive the nucleation and growth of blue phases into a certain lattice orientation. Furthermore, a processing window for obtaining arbitrary large blue-phase single crystals with predesigned lattice orientation, highly aligned reflective peaks, and significantly short forming time is provided here, which is essential for manufacturing and modulating optical devices and photonics.

36 MATERIALS SCIENCE↗

Effects of Nickel Doping on the Multiferroic and Magnetic Phases of MnWO 4

There are various orders in multiferroic materials with a frustrated spiral spin modulation inducing a ferroelectric state are extremely sensitive to small perturbations such as magnetic and electric fields, external pressure, or chemical substitutions. A classical multiferroic, the mineral Hubnerite with chemical formula MnWO 4 , shows three different magnetic phases at low temperature. The intermediate phase between 7.5K < T < 12.7K is multiferroic and ferroelectricity is induced by an inversion symmetry breaking spiral Mn-spin order and strong spin-lattice interactions. Furthermore, the substitution of Ni 2+ (spin 1) for Mn 2+ (spin 5/2) in MnWO 4 and its effects on the magnetic and multiferroic phases are studied. The ferroelectric phase is stabilized for low Ni content (up to 10%). Upon further Ni doping, the polarization in the ferroelectric phase is quickly suppressed while a collinear and commensurate magnetic phase, characteristic of the magnetic structure in NiWO 4 , appears first at higher temperature, gradually extends to lower temperature, and becomes the ground state above 30% doping. Between 10% and 30%, the multiferroic phase coexists with the collinear commensurate phase. In this concentration region, the spin spiral plane is close to the a-b plane which explains the drop of the ferroelectric polarization. Finally, the phase diagram of Mn 1-x Ni x WO 4 is derived by a combination of magnetic susceptibility, specific heat, electric polarization, and neutron scattering measurements.

36 MATERIALS SCIENCE↗

Stabilizing homogeneous CaMn6Sn6via oscillatory crystal growth: structural complexity in a kagome metal

CaMn6Sn6 is a member of the large family of Mn-based kagome metals derived by filling voids of the prototypical CoSn structure. We observed Ca-deficiency and structural complexity, with approximately 10% deficiency of calcium relative to the ideal 166 stoichiometry. These features are common in related Ca-based materials. We find that growth conditions stabilize different phases with varying Curie temperatures. Diffraction and magnetization measurements reveal that conventional growth profiles yield inhomogeneity both within and between crystals in a given batch, whereas an oscillatory temperature profile promotes homogeneous crystals that adopt a superstructure beyond the parent hexagonal structure type. We present the physical properties of crystals grown using the oscillatory approach. The crystals are highly conductive, with a c-axis residual resistivity ratio ρ(300 K)/ρ(2 K) exceeding 100 and a positive, linear magnetoresistance at base temperature. Magnetically, the crystals are quite similar to MgMn6Sn6, with easy-plane ferromagnetic behavior and a Curie temperature of TC ≈ 237 K. These results highlight the critical role of growth conditions in stabilizing homogeneous crystals of complex phases such as Ca0.9Mn6Sn6. The oscillatory growth approach provides an effective route for accessing the intrinsic properties of this complex material and may be broadly useful for the growth of related kagome systems.

May, Andrew [ORNL] (ORCID:0000000307778539)↗

Domain wall stability in ferroelectrics with space charges

Significant effect of semiconductor properties on domain configurations in ferroelectrics is demonstrated, especially in the case of doped materials. Phase field simulations are performed for ferroelectrics with space charges due to donors and electronic charge carriers. The free charges introduced thereby can act as a source for charge compensation at domain walls with uncompensated polarization bound charges. Results indicate that the equilibrium position of a domain wall with respect to its rotation in a head-to-head or a tail-to-tail domain configuration depends on the charge defect concentration and the Fermi level position.

36 MATERIALS SCIENCE↗

ATRP Enhances Structural Correlations In Polymerization–Induced Phase Separation**

Synthetic methods to control the structure of materials at sub–micron scales are typically based on the self–assembly of structural building blocks with precise size and morphology. On the other hand, many living systems can generate structure across a broad range of length scales in one step directly from macromolecules, using phase separation. Here, we introduce and control structure at the nano– and microscales through polymerization in the solid state, which has the unusual capability of both triggering and arresting phase separation. In particular, we show that atom transfer radical polymerization (ATRP) enables control of nucleation, growth, and stabilization of phase–separated poly–methylmethacrylate (PMMA) domains in a solid polystyrene (PS) matrix. ATRP yields durable nanostructures with low size dispersity and high degrees of structural correlations. Furthermore, we demonstrate that the length scale of these materials is controlled by the synthesis parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of the colored frequency noise in spin torque oscillators on current and magnetic field

The nano-scale spin torque oscillator (STO) is a compelling device for on-chip, highly tunable microwave frequency signal generation. Currently, one of the most important challenges for the STO is to increase its longer-time frequency stability by decreasing the 1/f frequency noise, but its high level makes even its measurement impossible using the phase noise mode of spectrum analyzers. Here, we present a custom made time-domain measurement system with 150 MHz measurement bandwidth making possible the investigation of the variation of the 1/f as well as the white frequency noise in a STO over a large set of operating points covering 18–25 GHz. The 1/f level is found to be highly dependent on the oscillation amplitude-frequency non-linearity and the vicinity of unexcited oscillation modes. These findings elucidate the need for a quantitative theoretical treatment of the low-frequency, colored frequency noise in STOs. Based on the results, we suggest that the 1/f frequency noise possibly can be decreased by improving the microstructural quality of the metallic thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability and electronic properties of InSb nanowires: A first-principles study

Using first-principles calculations, we investigate the structural stability and electronic properties of InSb nanowires (NWs). The results show that, in contrast to the bulk InSb phase, wurtzite (WZ) NWs are more stable than zinc-blende (ZB) NWs when the NW diameter is smaller than 10 nm. Nonpassivated ZB and WZ NWs are found to be metallic and semiconducting, respectively. After passivation, both ZB and WZ NWs exhibit direct-gap semiconductor character, and the band gap magnitude of the NWs strongly depends on the suppression of surface states by the charge-compensation ability of foreign atoms to surface atoms. Moreover, the carrier mobility of the NW can be strengthened by halogen passivation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗