Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES - ELASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Buckling Analysis of Rectangular Plates With Holes

BUCKO is computer program developed to predict buckling of rectangular compression-loaded orthotropic plate with centrally located cutout. Plate assumed balanced, symmetric laminate of uniform thickness. Cutout shape elliptical, circular, rectangular, or square. Package includes sample data demonstrating essence of program and ease of use. Written in FORTRAN V.

Nemeth, M. P.↗

Qualification Testing of General Electric 50 Ah Nickel-Cadmium Cells with New Separator and New Positive Plate Processing

Forty-two 50 Ah aerospace nickel-cadmium cells were delivered to Goddard Space Flight Center (GSFC) by General Electric (GE) in February, 1985, for the purpose of evaluating and qualifying a new nylon separator material Pellon 2536, and the new GE Positive Plate Nickel Attack Control Passivation process. Testing began in May, 1985, at the Naval Weapons Support Center (NWSC) in Crane, Indiana with standard initial evaluation tests. Life cycling in both Low Earth Orbit (LEO) and Geosynchronous Orbit (GEO) began in July, 1985, with approximately 1200 LEO cycles complete at this writting. Early test results show that cells with positive plate passivation exhibit higher than normal charge voltage characteristics. Other aspects of performance were nominal.

Morrow, G. W.↗

Modes of vibration on sqaure fiberglass epoxy composite thick plate

The frequencies and nodal patterns of a square thick plate of unidirectional fiberglass epoxy composite are measured experimentally. The constituent material is transversely isotropic. The plate is transversely excited at the center of the upper face, its resonant frequencies in the frequency range of 3 kHz to 21.73 kHz are detected and the measured nodal patterns are sketched.

Williams, J. H., Jr.↗

Triangular element for analysis of perforated plates under inplane and transverse loads

A C0-type triangular element formulation in orthogonal curvilinear coordinates has been developed, based on assumptions of transverse inextensibility and constant shear angle through thickness, for analysis of perforated plates subjected to in-plane and transverse loads. The assumed quadratic-displacement potential-energy approach is utilized in obtaining an element stiffness matrix and consistent load vector, which are numerically integrated. Numerical results have been obtained using a straight-sided triangular version, which behaves like a subparametric element, for stretching and bending analyses of perforated plates.

Chaudhuri, R. A.↗

Triangular element for analysis of a stretched plate weakened by a part-through hole

A C0-type triangular element formulation in orthogonal curvilinear coordinates has been developed, based on assumptions of transverse inextensibility and layerwise constant shear angle, for analysis of a stretched homogeneous plate weakened by a part-through hole. The element stiffness matrix and consistent load vector have been derived using an assumed-quadratic-displacement (in the curvilinear coordinate plane) potential-energy approach. Numerical results obtained using the straight-sided triangular element version indicate the presence of transverse shear deformation in a stretched homogeneous plate weakened by a symmetrically located concentric hole.

Chaudhuri, R. A.↗

Buckling of simply supported plate assemblies subject to shear loading

An analysis is presented of the shear buckling load of an arbitrary simply-supported prismatic plate assembly or stiffened panel configuration. The method utilizes stiffness matrices developed by Wittrick (1968). For the restraint of simple support along edges perpendicular to the longitudinal direction, various wavelengths of response are combined using an energy method that involves only a boundary integral. Numerical results for plate and panel configurations show the accuracy and convergence of the method.

Anderson, M. S.↗

The Shane-Wirtanen counts - Plate correction factors and correlation functions

It has recently been argued that the break in the galaxy correlation function observed in the Lick counts of Shane and Wirtanen may be an artifact of plate variations in limiting magnitude. This has stimulated us to generalize our analysis of the effect of errors in the plate depths to include a possible systematic term, and to develop tests for the random and systematic errors. The tests show that neither can have appreciably affected the distinctive feature found in the galaxy two-point correlation function for the Lick sample.

Groth, Edward J.↗

Use of gamma ray radiation to parallel the plates of a Fabry-Perot interferometer

The use of gamma radiation to parallel the plates of a Fabry-Perot etalon is examined. The method for determining the etalon parallelism, and the procedure for irradiating the posts are described. Changes in effective gap for the etalon over the surface are utilized to measure the parallelism of the Fabry-Perot etalon. An example in which this technique is applied to an etalon of fused silica plates, which are 132 mm in diameter and coded with zinc sulfide and cryolite, with Zerodur spaces 2 cm in length. The effect of the irradiation of the posts on the thermal performance of the etalon is investigated.

Skinner, Wilbert R.↗

Contemporary plate motions from Lageos - A decade later

Progress made due to Lageos tracking and the participation of over 20 countries in the acquisition and analysis of precise range measurements is reviewed. Results of both the observed global and regional plate kinematics are presented. Mission accomplishments include the following: (1) laser technology advancements of more than an order of magnitude in single point range precision over the last ten years, (2) station positioning at the few centimeter accuracy level for annual solutions, and (3) the emergence of a global picture of plate kinematics.

Christodoulidis, D. C.↗

Wave propagation in a plate after impact by a projectile

The wave propagation in a circular plate after impact by a cylindrical projectile is studied. In the vicinity of impact, the pressure is computed numerically. An intense pressure pulse is generated that peaks 0.2 microns after impact, then drops sharply to a plateau. The response of the plate is determined adopting a modal solution of Mindlin's equations. Velocity and acceleration histories display both propagating and dispersive features.

El-Raheb, M.↗

Dynamic response of laminated composite plates using a three-dimensional hybrid-stress finite-element formulation

A method of analysis of dynamic response of laminated composite plates is presented. The analysis is carried by using a hybrid-stress finite element numerical technique. By using this approach, the response of simply supported laminated plates subjected to sinusoidal loading are investigated. For the solution of the finite element equations of motion of free vibrations and dynamic response problems, two effective methods of solution, the space iteration method and the Newmark direct integration method are used. These two methods are discussed here.

Liou, W. J.↗

Stress-intensity factors for small surface and corner cracks in plates

Three-dimensional finite-element and finite-alternating methods were used to obtain the stress-intensity factors for small surface and corner cracked plates subjected to remote tension and bending loads. The crack-depth-to-crack-length ratios (a/c) ranged from 0.2 to 1 and the crack-depth-to-plate-thickness ratios (a/t) ranged from 0.05 to 0.2. The performance of the finite-element alternating method was studied on these crack configurations. A study of the computational effort involved in the finite-element alternating method showed that several crack configurations could be analyzed with a single rectangular mesh idealization, whereas the conventional finite-element method requires a different mesh for each configuration. The stress-intensity factors obtained with the finite-element-alternating method agreed well (within 5 percent) with those calculated from the finite-element method with singularity elements.

Raju, I. S.↗

Intraplate deformation, stress in the lithosphere and the driving mechanism for plate motions

During this period work was carried out on three fronts relevant to the understanding of intraplate deformation, stress in the lithosphere, and the driving mechanisms for plate motions: (1) observational constraints, using GPS geodesy on the deformation in the region of the boundry between the Pacific and North American plates in central and southern California; (2) numerical modeling of the effects of temperature dependent lithospheric viscosity on the stress and strain history of extensional regimes; and (3) improvement of estimates of mantle viscosity variation, the long-wave-length density variations in the mantle, and the topography of the core-mantel boundary from modeling of geoid anomalies, nutation, and changes in length of day. These projects are described in more detail, followed by a discussion of meetings attended and a list of abstracts and papers submitted and/or published.

Hager, Bradford H.↗

A dual plate thermoplastic recording device for holographic interferometry

The development of a dual plate holographic interferometer using thermoplastic recording devices is described. The operational characteristics of the thermoplastic devices are investigated and optimized for fringe contrast and signal-to-noise ratio. The dual plate device was demonstrated in a transonic wind tunnel at NASA Ames Research Center. The interferograms derived from the thermoplastic device are compared with those derived from conventional photographic emulsions. The fringe contrast achieved with the optimized thermoplastic device is equivalent to the contrast achieved with conventional techniques.

Umstatter, Holly L.↗

Plates and their motions

Work on plate motions published in 1983-1986 and in early 1987 is reviewed. Models for these motions, including global ones for driving forces and local ones for subduction history and back-arc spreading, are addressed. The problem of reference frames, both hotspot and paleomagnetic, is discussed. The assessment of errors in plate motion studies is reviewed.

Jurdy, Donna M.↗

A finite element large deflection random response analysis of beams and plates subjected to acoustic loading

A finite element formulation is presented for the analysis of beams and rectangular plates undergoing large deflections subjected to Gaussian white noise excitations. Single-mode response is assumed in the present formulation. Root-mean-square (RMS) maximum deflections for simply supported and clamped beams and plates at various sound spectrum levels are obtained and compared with solutions using the Fokker-Planck-Kolmogorov equation and the equivalent linearization methods. RMS maximum stains and equivalent linear frequencies are compared with the equivalent linearization results for assessment of the accuracy of the finite element method.

Mei, Chuh↗

Evidence for divergent plate-boundary characteristics and crustal spreading on Venus

Detailed examination of the topography and morphology of western Aphrodite Terra reveals numerous features that are similar to terrestrial divergent plate-boundary characteristics. Individual domains between fracture-zone-like discontinuities contain a variety of bilaterally symmetrical topographic elements that suggest that topographic features have been created at rise crests, rifted and separated, and moved laterally to their present symmetrical positions. The topographic and morphologic similarities, together with strikingly similar mirror-image map patterns on both sides of the rise axis, suggest that western Aphrodite Terra shares the characteristics of oceanic divergent plate boundaries, and is the site of crustal spreading on Venus. Topographic profiles are consistent with spreading rates of the order of several centimeters per year.

Head, James W., III↗

Error analysis of finite element solutions for postbuckled plates

An error analysis of results from finite-element solutions of problems in shell structures is further developed, incorporating the results of an additional numerical analysis by which oscillatory behavior is eliminated. The theory is extended to plates with initial geometric imperfections, and this novel analysis is programmed as a postprocessor for a general-purpose finite-element code. Numerical results are given for the case of a stiffened panel in compression and a plate loaded in shear by a 'picture-frame' test fixture.

Sistla, Rajaram↗