Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulated Probes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Spectral and polarization based imaging in deep-ultraviolet excited photoelectron microscopy

Using photoelectron emission microscopy, nanoscale spectral imaging of atomically thin MoS2 buried between Al2O3 and SiO2 is achieved by monitoring the wavelength and polarization dependence of the photoelectron signal excited by deep-ultraviolet light. Although photons induce the photoemission, images can exhibit resolutions below the photon wavelength as electrons sense the response. To validate this concept, the dependence of photoemission yield on the wavelength and polarization of the exciting light was first measured and then compared to simulations of the optical response quantified with classical optical theory. A close correlation between experiment and theory indicates that photoemission probes the optical interaction of UV-light with the material stack directly. The utility of this probe is then demonstrated when both the spectral and polarization dependence of photoemission observe spatial variation consistent with grains and defects in buried MoS2. Taken together, these new modalities of photoelectron microscopy allow mapping of optical property variation at length scales unobtainable with conventional light-based microscopy.

Beechem, Thomas E. (ORCID:0000000275360719)↗
DOE OSTI2022

Resonant double-core excitations with ultrafast, intense X-ray pulses

Intense few-to-sub-femtosecond soft X-ray pulses can produce neutral, two-site excited double-core-hole states by promoting two core electrons to the same unoccupied molecular orbital. We theoretically investigate double nitrogen K-edge excitations of nitrous oxide (N$_2$O) with multiconfigurational electronic structure calculations. We show that the second core-excitation energy is reduced with respect to its ground state value. A site-selective double core-excitation mechanism using intense few-femtosecond x-rays is investigated using time-dependent Schrodinger equation (TDSE) simulations. The subsequent two-step Auger-Meitner and two-electrons-one-electron decay spectra of the double core-excited states are analysed using a Mulliken population analysis of the multiconfirational wavefunctions. The change in the electron emission lineshape between the absorption of 1 or 2 photons in the resonant core-excitation is predicted by combining this approach with the TDSE simulations. Furthermore, we examine the possibility of resolving the double core-excited states with X-ray pump-probe techniques by calculating the chemical shifts of the core-electron binding energy of the core-excited states and decay products.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

DIRECT DETECTION OF COMPLEX ORGANIC PRODUCTS IN ULTRAVIOLET (Lyα) AND ELECTRON-IRRADIATED ASTROPHYSICAL AND COMETARY ICE ANALOGS USING TWO-STEP LASER ABLATION AND IONIZATION MASS SPECTROMETRY

As discovery of complex molecules and ions in our solar system and the interstellar medium has proliferated, several groups have turned to laboratory experiments in an effort to simulate and understand these chemical processes. So far only infrared (IR) and ultraviolet (UV) spectroscopy has been able to directly probe these reactions in ices in their native, low-temperature states. Here we report for the first time results using a complementary technique that harnesses two-step two-color laser ablation and ionization to measure mass spectra of energetically processed astrophysical and cometary ice analogs directly without warming the ices—a method for hands-off in situ ice analysis. Electron bombardment and UV irradiation of H{sub 2}O, CH{sub 3}OH, and NH{sub 3} ices at 5 K and 70 K led to complex irradiation products, including HCO, CH{sub 3}CO, formamide, acetamide, methyl formate, and HCN. Many of these species, whose assignment was also strengthened by isotope labeling studies and correlate with IR-based spectroscopic studies of similar irradiated ices, are important ingredients for the building blocks of life. Some of them have been detected previously via astronomical observations in the interstellar medium and in cometary comae. Other species such as CH{sub 3}CO (acetyl) are yet to be detected in astrophysical ices or interstellar medium. Our studies suggest that electron and UV photon processing of astrophysical ice analogs leads to extensive chemistry even in the coldest reaches of space, and lend support to the theory of comet-impact-induced delivery of complex organics to the inner solar system.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

GMC COLLISIONS AS TRIGGERS OF STAR FORMATION. I. PARAMETER SPACE EXPLORATION WITH 2D SIMULATIONS

We utilize magnetohydrodynamic (MHD) simulations to develop a numerical model for giant molecular cloud (GMC)–GMC collisions between nearly magnetically critical clouds. The goal is to determine if, and under what circumstances, cloud collisions can cause pre-existing magnetically subcritical clumps to become supercritical and undergo gravitational collapse. We first develop and implement new photodissociation region based heating and cooling functions that span the atomic to molecular transition, creating a multiphase ISM and allowing modeling of non-equilibrium temperature structures. Then in 2D and with ideal MHD, we explore a wide parameter space of magnetic field strength, magnetic field geometry, collision velocity, and impact parameter and compare isolated versus colliding clouds. We find factors of ∼2–3 increase in mean clump density from typical collisions, with strong dependence on collision velocity and magnetic field strength, but ultimately limited by flux-freezing in 2D geometries. For geometries enabling flow along magnetic field lines, greater degrees of collapse are seen. We discuss observational diagnostics of cloud collisions, focussing on {sup 13}CO(J = 2–1), {sup 13}CO(J = 3–2), and {sup 12}CO(J = 8–7) integrated intensity maps and spectra, which we synthesize from our simulation outputs. We find that the ratio of J = 8–7 to lower-J emission is a powerful diagnostic probe of GMC collisions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

An analytic hybrid halo + perturbation theory model for small-scale correlators: baryons, halos, and galaxies

In this work, we update Halo Zeldovich Perturbation Theory (HZPT, [1]), an analytic model for the two-point statistics of dark matter, to describe halo and galaxy clustering, and galaxy-matter cross-correlation on nonlinear scales. The model correcting Zeldovich has an analytic Fourier transform, and therefore is valid in both configuration space and Fourier space. The model is accurate at the 2%-level or less for P_mm (k< 1 h/Mpc), P_hm (k< 1 h/Mpc), P_hh (k< 2 h/Mpc), P gm (k< 1 h/Mpc), P gg (k< 1 h/Mpc), ξ mm (r> 1 Mpc/h), ξ hm (r> 2 Mpc/h), ξ hh (r> 2 Mpc/h), ξ gm (r> 1 Mpc/h), ξ gg (r> 2 Mpc/h), for LRG-like mock galaxies. We show that the HZPT model for matter correlators can account for the effects of a wide range of baryonic feedback models and provide two extended dark matter models which are of 1% (3%) accuracy for k < 10 (8) h/Mpc. We explicitly model the non-perturbative features of halo exclusion for the halo-halo and galaxy-galaxy correlators, as well as the presence of satellites for galaxy-matter and galaxy-galaxy correlation functions. We perform density estimation using N-body simulations and a wide range of HOD galaxy mocks to obtain correlations of model parameters with the cosmological parameters Ω m and σ 8 . HZPT can provide a fast, interpretable, and analytic model for combined-probe analyses of redshift surveys using scales well into the non-linear regime.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Multimachine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. Here, in the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

OmniXAS: A universal deep-learning framework for materials x-ray absorption spectra

X-ray absorption spectroscopy (XAS) is a powerful characterization technique for probing the local chemical environment of absorbing atoms. However, analyzing XAS data presents significant challenges, often requiring extensive, computationally intensive simulations, as well as significant domain expertise. These limitations hinder the development of fast, robust XAS analysis pipelines that are essential in high-throughput studies and for autonomous experimentation. Here, we address these challenges with OmniXAS, a framework that contains a suite of transfer learning approaches for XAS prediction, each uniquely contributing to improved accuracy and efficiency, as demonstrated on the K-edge spectra database covering eight 3⁢d transition metals (Ti–Cu). The OmniXAS framework is built upon three distinct strategies. First, we use M3GNet [Nat. Comput. Sci. 2, 718 (2022)] to derive latent representations of the local chemical environment of absorption sites as input for XAS prediction, achieving significant improvements over conventional featurization techniques. Second, we employ a hierarchical transfer learning strategy, training a universal multitask model across elements before fine-tuning for element-specific predictions. Models based on this cascaded approach after elementwise fine-tuning outperform element-specific models by up to 69%. Third, we implement cross-fidelity transfer learning, adapting a universal model to predict spectra generated by simulation of a different fidelity with a much higher computational cost. This approach improves prediction accuracy by up to 11% over models trained on the target fidelity alone. Our approach significantly boosts the throughput of XAS modeling by orders of magnitude as compared to first-principles simulations and is extendable to XAS prediction for a broader range of elements. The proposed transfer learning framework is generalizable to enhance deep-learning models that target other properties in materials research.

36 MATERIALS SCIENCE↗
DOE OSTI2016

The redshifted hydrogen balmer and metastable He I absorption line system in mini-felobal quasar SDSS J112526.12+002901.3: a parsec-scale accretion inflow?

The accretion of the interstellar medium onto central super-massive black holes is widely accepted as the source of the gigantic energy released by the active galactic nuclei. However, few pieces of observational evidence have been confirmed directly demonstrating the existence of the inflows. The absorption line system in the spectra of quasar SDSS J112526.12+002901.3 presents an interesting example in which the rarely detected hydrogen Balmer and metastable He i absorption lines are found redshifted to the quasar's rest frame along with the low-ionization metal absorption lines Mg ii, Fe ii, etc. The repeated SDSS spectroscopic observations suggest a transverse velocity smaller than the radial velocity. The motion of the absorbing medium is thus dominated by infall. The He i* lines present a powerful probe to the strength of ionizing flux, while the Balmer lines imply a dense environment. With the help of photoionization simulations, we find that the absorbing medium is exposed to the radiation with ionization parameter U ≈ 10{sup −1.8}, and the density is n(H)≈10{sup 9} cm{sup −3}. Thus the absorbing medium is located ∼4 pc away from the central engine. According to the similarity in the distance and physical conditions between the absorbing medium and the torus, we strongly propose the absorption line system as a candidate for the accretion inflow, which originates in the inner surface of the torus.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1999

Langley 8-Ft. HTT Test 139 Gas Analyses

This report presents results of gas analyses of Mach 7 Tunnel Calibration Test 139 conducted in the Langley 8-Ft. HTT from May through June of 1998. These tests in support of hypersonic airbreathing propulsion provided a current calibration at the primary test condition for the National Aero-Space Plane Concept Demonstration Engine and a new calibration for the two test conditions that will be used for engine testing in support of the Hyper-X program. Samples taken from three probes on the Flow Survey Apparatus were analyzed using mass spectrometers. Although this wind tunnel doesn't produce a true simulation of flight conditions, test results show that a uniform oxygen concentration of 21 percent was achieved.

Sprinkle, Danny R.↗
NASA NTRS1998

Carbon Nanotube Based Nano-Electro-Mechanical Systems (NEMS)

Carbon nanotubes (CNT) enable nanoelectromechanical systems (NEMS) because of their inherent nanostructure, intrinsic electric conductivity and mechanical resilience. The collaborative work between Stanford (experiment) and NASA Ames (theory and simulation) has made progress in two types of CNT based NEMS for nanoelectronics and sensor applications. The CNT tipped scanning probe microscopy (SPM) is a NEMS in which CNT tips are used for nanoscale probing, imaging and manipulating. It showed great improvement in probing surfaces and biological systems over conventional tips. We have recently applied it to write (lithography) and read (image) uniform SiO2 lines on large Si surface area at speed up to 0.5 mm per s. Preliminary work using approximately 10 nm multiwall nanotube tips produced approximately 10 nm structures and showed that the CNT tips didn't wear down when crashed as conventional tips often do. This presents a solution to the long standing tip-wear problem in SPM nanolithography. We have also explored potential of CNT tips in imaging DNA in water. Preliminary experiment using 10 nm CNT tips reached 5 nm resolution. The 1 nm nanolithography and 1 nm DNA imaging can be expected by using approximately 1 nm CNT tips. In contrast to CNT tipped SPM, we also fabricated CNT devices on silicon wafer in which CNTs connect patterned metallic lines on SiO2/Si by a simple chemical vapor deposition process. Using conventional lithography for silicon wafer, we have been able to obtain CNT based transistors and sensors. Investigations of the CNT NEMS as physical, biological and chemical sensors are in progress and will be discussed.

Han, Jie↗
DOE OSTI2026

DESI DR2 Reference Mocks: Clustering results from UCHUU ELGs and QSOs

High-redshift galaxy clustering provides a powerful probe of the growth of structure, testing models of dark matter, dark energy, and galaxy formation during the epoch when the Universe was rapidly evolving. Emission line galaxies (ELGs) and quasars (QSOs) are used as tracers of dark matter by the Dark Energy Spectroscopic Instrument (DESI) to probe this redshift regime. We present results from ELG and QSO mock catalogs created from the Uchuu N-body simulation and tuned to DESI Data Release 2 (DR2) clustering. Employing a modified subhalo abundance matching (SHAM) technique, we populate Uchuu halos and subhalos with QSOs between 0.8 < z < 2.1. For ELGs, we modify this method to select satellite galaxies with low velocities relative to their associated central halos, and populate a separate set of Uchuu halos and subhalos with ELGs between 0.8 < z < 1.6. In this paper, we reproduce the redshift evolution of number density and clustering statistics across the fitted range of scales. We also measure the large-scale clustering bias of both the data and mock samples. These results improve simulated lightcone construction from cosmological models and enhance our understanding of the galaxy-halo connection.

Vaisakh, R. [Southern Methodist U.] (ORCID:0009000↗
NASA NTRS1992

Analysis of TIMS performance subjected to simulated wind blast

The results of the performance of the Thermal Infrared Multispectral Scanner (TIMS) when it is subjected to various wind conditions in the laboratory are described. Various wind conditions were simulated using a 24 inch fan or combinations of air jet streams blowing toward either or both of the blackbody surfaces. The fan was used to simulate a large volume of air flow at moderate speeds (up to 30 mph). The small diameter air jets were used to probe TIMS system response in reaction to localized wind perturbations. The maximum nozzle speed of the air jet was 60 mph. A range of wind directions and speeds were set up in the laboratory during the test. The majority of the wind tests were conducted under ambient conditions with the room temperature fluctuating no more than 2 C. The temperature of the high speed air jet was determined to be within 1 C of the room temperature. TIMS response was recorded on analog tape. Additional thermistor readouts of the blackbody temperatures and thermocouple readout of the ambient temperature were recorded manually to be compared with the housekeeping data recorded on the tape. Additional tests were conducted under conditions of elevated and cooled room temperatures. The room temperature was varied between 19.5 to 25.5 C in these tests. The calibration parameters needed for quantitative analysis of TIMS data were first plotted on a scanline-by-scanline basis. These parameters are the low and high blackbody temperature readings as recorded by the TIMS and their corresponding digitized count values. Using these values, the system transfer equations were calculated. This equation allows us to compute the flux for any video count by computing the slope and intercept of the straight line that relates the flux to the digital count. The actual video of the target (the lab floor in this case) was then compared with a simulated target. This simulated target was assumed to be a blackbody at emissivity of .95 degrees and the temperature was assumed to be at ambient temperature as recorded by the TIMS for each scanline. Using the slope and the intercept the flux corresponding to this target was converted into digital counts. The counts were observed to have a strong correlation with the actual video as recorded by the TIMS. The attached graphs describe the performance of the TIMS when compressed air is blown at each one of the blackbodies at different speeds. The effect of blowing a fan and changing the room temperature is also being analyzed. Results indicate that the TIMS system responds to variation in wind speed in real time and maintains the capability to produce accurate temperatures on a scan line basis.

Jaggi, S.↗
NASA NTRS2020

NASA ETR Quiet Zone Probe Study

The NASA Langley Research Center’s Experimental Test Range is an indoor anechoic compact range far field test facility used to conduct antenna and electromagnetic radiation measurements. The Experimental Test Range was designed to simulate far field illumination in the facility test volume over a broad band of frequencies by collimating the RF energy from the 26 ft by 26 ft parabolic reflector. The quality of the antenna and radiation measurements are dependent on the uniformity of the far field plane wave generated by the compact range reflector. While this facility is going through several upgrades, this report describes an assessment of the far field plane wave conducted after resurfacing the primary reflector to improve performance and extend the range of frequencies for which this facility can operate. This assessment addresses far field uniformity probe data measured in the test volume across the facility operational frequency bands.

Ticatch, Larry A.↗
DOE OSTI2021

Simulations of the IR and Raman spectra of water confined in amorphous silica slit pores

Water in nano-scale confining environments is a key element in many biological, material, and geological systems. The structure and dynamics of the liquid can be dramatically modified under these conditions. Probing these changes can be challenging, but vibrational spectroscopy has emerged as a powerful tool for investigating their behavior. A critical, evolving component of this approach is a detailed understanding of the connection between spectroscopic features and molecular-level details. In this paper, this issue is addressed by using molecular dynamics simulations to simulate the linear infrared (IR) and Raman spectra for isotopically dilute HOD in D 2 O confined in hydroxylated amorphous silica slit pores. The effect of slit-pore width and hydroxyl density on the silica surface on the vibrational spectra is also investigated. The primary effect of confinement is a blueshift in the frequency of OH groups donating a hydrogen bond to the silica surface. This appears as a slight shift in the total (measurable) spectra but is clearly seen in the distance-based IR and Raman spectra. Analysis indicates that these changes upon confinement are associated with the weaker hydrogen-bond accepting properties of silica oxygens compared to water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

GALACTO-FORENSIC OF LARGE MAGELLANIC CLOUD'S ORBITAL HISTORY AS A PROBE FOR THE DARK MATTER POTENTIAL IN THE OUTSKIRTS OF THE GALAXY

The three-dimensional observed velocities of the Large and Small Magellanic Clouds (LMC and SMC) provide an opportunity to probe the Galactic potential in the outskirt of the Galactic halo. Based on a canonical NFW model of the Galactic potential, Besla et al. reconstructed LMC and SMC's orbits and suggested that they are currently on their first perigalacticon passage about the Galaxy. Motivated by several recent revisions of the Sun's motion around the Galactic center, we re-examine the LMC's orbital history and show that it depends sensitively on the dark matter's mass distribution beyond its present Galactic distance. We utilize results of numerical simulations to consider a range of possible structural and evolutionary models for the Galactic potentials. We find that within the theoretical and observational uncertainties, it is possible for the LMC to have had multiple perigalacticon passages on the Hubble timescale, especially if the Galactic circular velocity at the location of the Sun is greater than {approx}228 km s{sup -1}. Based on these models, a more accurate determination of the LMC's motion may be used to determine the dark matter distribution in the outskirt of the Galactic halo.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

NONLINEAR BEHAVIOR OF BARYON ACOUSTIC OSCILLATIONS IN REDSHIFT SPACE FROM THE ZEL'DOVICH APPROXIMATION

Baryon acoustic oscillations (BAO) are a powerful probe of the expansion history of the universe, which can tell us about the nature of dark energy. In order to accurately characterize the dark energy equation of state using BAO, we must understand the effects of both nonlinearities and redshift space distortions on the location and shape of the acoustic peak. In a previous paper, we introduced a novel approach to second order perturbation theory in configuration space using the Zel'dovich approximation, and presented a simple result for the first nonlinear term of the correlation function. In this paper, we extend this approach to redshift space. We show how to perform the computation and present the analytic result for the first nonlinear term in the correlation function. Finally, we validate our result through comparison with numerical simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2008

Three-Dimensional Signatures of Intermittent Magnetic Reconnection in Global Simulations of Dayside Magnetosphere Dynamics

We performed high resolution global MHD simulations of THEMIS dayside crossings events in May -June 2007. We found that magnetopause surface is not in steady-state even during extended periods of steady solar wind conditions. The so-called tilted reconnection lines become unstable due to formation of pressure bubbles, strong core field flux tubes, vortices, and traveling magnetic field cavities. The topology of FTEs differ from that in two dimension cartoons representing obliquely oriented quasi-2D flux rope. The structure of FTE is changing at spatial scales of 1 -2 Re. Closely located space probes can observe completely different signatures. Branches of bent flux rope can move in opposite directions. THEMIS and Cluster observations are consistent with signatures predicted by simulations.

Kuznetsova, M.M.↗