Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Simulated Space Vacuum Ultraviolet (VUV) Exposure Testing for Polymer Films

Vacuum ultraviolet (VUV) radiation of wavelengths between 115 and 200 nm produced by the sun in the space environment can cause degradation to polymer films producing changes in optical, mechanical, and chemical properties. These effects are particularly important for thin polymer films being considered for ultra-lightweight space structures, because, for most polymers, VUV radiation is absorbed in a thin surface layer. NASA Glenn Research Center has developed facilities and methods for long-term ground testing of polymer films to evaluate space environmental VUV radiation effects. VUV exposure can also be used as part of sequential simulated space environmental exposures to determine combined damaging effects. This paper will describe the effects of VUV on polymer films and the necessity for ground testing. Testing practices used at Glenn Research Center for VUV exposure testing will be described including characterization of the VUV radiation source used, calibration procedures traceable to the National Institute of Standards and Technology (NIST), and testing techniques for VUV exposure of polymer surfaces.

Dever, Joyce A.↗

A near term space demonstration program for large structures

For applications involving an employment of ultralarge structures in space, it would be necessary to have some form of space fabrication and assembly in connection with launch vehicle payload and volume limitations. The findings of a recently completed NASA sponsored study related to an orbital construction demonstration are reported. It is shown how a relatively small construction facility which is assembled in three shuttle flights can substantially advance space construction know-how and provide the nation with a permanent shuttle tended facility that can further advance large structures technologies and provide a construction capability for deployment of large structural systems envisioned for the late 1980s. The large structures applications identified are related to communications, navigation, earth observation, energy systems, radio astronomy, illumination, space colonization, and space construction.

Nathan, C. A.↗

Crystal structure and magnetic properties of titanium-based CuTi{sub 2−x}M{sub x}S{sub 4} and CuCr{sub 2−x}Ti{sub x}Se{sub 4} chalcospinels

CuTi{sub 2−x}M{sub x}S{sub 4} (M=Fe, Mn, Co; x=0.3, 0.5) and CuCr{sub 2−x}Ti{sub x}Se{sub 4} (x=0.3, 0.5, 0.7) chalcospinels were synthesized by conventional solid-state reactions. Their crystal structures were determined by single-crystal X-ray diffraction. All of the phases crystallized in cubic spinel-type structures (space group, Fd3{sup ¯}m). For all of the chalcospinel compounds, the edge-length distortion parameter (ELD) indicated that the most distorted polyhedron was Q[(Ti,M){sub 3}Cu], which displayed an ∼8% distortion from an ideal tetrahedron structure (Q=S or Se). The Mn-based thiospinel CuMn{sub 0.3}Ti{sub 1.7}S{sub 4} is paramagnetic, whereas the Fe-based thiospinels (CuTi{sub 2−x}Fe{sub x}S{sub 4}; x=0.3 and 0.7) are strongly antiferromagnetic due to their spin-glass states. The magnetic susceptibility measurements indicated ferromagnetic behavior for the selenospinels (CuCr{sub 2−x}Ti{sub x}Se{sub 4}; x=0.3, 0.5 and 0.7). - Graphical abstract: View along [1 0 0] of CuCr{sub 2−x}Ti{sub x}Se{sub 4} crystal structure showing tetrahedral and octahedral units. To the right, experimental X-ray powder diffraction pattern of CuCr{sub 1.7}Ti{sub 0.3}Se{sub 4} (top) in compared (in a like-mirror representation) to a simulated X-ray pattern from single-crystal data (bottom). - Highlights: • Chalcogenides belong to the family of compounds spinel-type. • Resolved single crystals of the solid solutions have space group Fd-3m. • The distortion of the tetrahedral and octahedral volume were calculated. • These solid solutions shows a ferromagnetic or spin-glass behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanosized helical magnetic domains in strongly frustrated Fe 3 PO 4 O 3

Fe 3 PO 4 O 3 forms a noncentrosymmetric lattice structure (space group R3m) comprising triangular motifs of Fe 3+ coupled by strong antiferromagnetic interactions ( | Θ CW | > 900 K). Neutron diffraction from polycrystalline samples shows that strong frustration eventually gives way to an ordered helical incommensurate structure below T N =163 K, with the helical axis in the hexagonal ab plane and a modulation length to ~86 Å. The magnetic structure consists of an unusual needlelike correlation volume that extends past 900 Å along the hexagonal c axis but is limited to ~70 Å in the a b plane, despite the three-dimensional nature of the magnetic sublattice topology. The small in-plane correlation length, which persists to at least T = T N /40 , indicates a robust blocking of long-range order of the helical magnetic structure, and therefore stable domain walls, or other defect spin textures, must be abundant in Fe 3 PO 4 O 3 . Temperature-dependent neutron powder diffraction reveals small negative thermal expansion below T N . No change in lattice symmetry is observed on cooling through T N , as revealed by high-resolution synchrotron x-ray diffraction. The previously reported reduced moment of the Fe 3+ ions (S = 5/2), μ ~ 4.2 μ B , is confirmed here through magnetization studies of a magnetically diluted solid solution series of compounds, Fe (3–x) Ga x PO 4 O 3 , and is consistent with the refined magnetic moment from neutron diffraction 4.14(2) μ B . Here, we attribute the reduced moment to a modified spin density distribution arising from ligand charge transfer in this insulating oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annual survey of spaceflight safety systems: 11th supplement. Survey period - July 1980-June 1981

Reports in the field of space flight safety applicable to current and future operational space activities which appeared between July 1980 and June 1981 are surveyed. Subjects in the area of flight rescue and safety during launch, on-orbit, reentry and landing phases include the major activities and findings of the first Shuttle test flight, a slidewire system for emergency egress from the Space Shuttle on the launch pad, and the testing of the Spacelab engineering model. In the area of human capabilities and crew roles, attention is given to reports of repairs to the Salyut 6 space station made by a Soyuz crew, and an assessment of weightlessness effects on space worker health and safety. Safety requirements for STS payloads including pressure vessels, and the Orbiter window system and for spacecraft testing are also presented, along with those for a television system to aid in monitoring astronaut extravehicular activities. For the operation of large space structures, reports include EVA equipment for satellite servicing and the safety aspects of connectors used in construction. Finally, attention is given to safety-related criteria in a study of Shuttle interactions with the proposed Space Operations Center.

Brown, N. E.↗

Molecularly Oriented Polymeric Thin Films for Space Applications

The increased commitment from NASA and private industry to the exploration of outer space and the use of orbital instrumentation to monitor the earth has focused attention on organic polymeric materials for a variety of applications in space. Some polymeric materials have exhibited short-term (3-5 yr) space environmental durability; however, future spacecraft are being designed with lifetimes projected to be 10-30 years. This gives rise to concern that material property change brought about during operation may result in unpredicted spacecraft performance. Because of their inherent toughness and flexibility, low density, thermal stability, radiation resistance and mechanical strength, aromatic polyimides have excellent potential use as advanced materials on large space structures. Also, there exists a need for high temperature (200-300 C) stable, flexible polymeric films that have high optical transparency in the 300-600nm range of the electromagnetic spectrum. Polymers suitable for these space applications were fabricated and characterized. Additionally, these polymers were molecularly oriented to further enhance their dimensional stability, stiffness, elongation and strength. Both unoriented and oriented polymeric thin films were also cryogenically treated to temperatures below -184 C to show their stability in cold environments and determine any changes in material properties.

Fay, Catharine C.↗

Facility and Methods Developed for Simulated Space Vacuum Ultraviolet Exposure Testing of Polymer Films

Vacuum ultraviolet (VUV) radiation of wavelengths between 115 and 200 nm produced by the Sun in the space environment can degrade polymer films, producing changes in their optical, mechanical, and chemical properties. These effects are particularly important for thin polymer films being considered for ultralightweight space structures, because, for most polymers, VUV radiation is absorbed in a thin surface layer. The NASA Glenn Research Center has developed facilities and methods for long-term ground testing of polymer films to evaluate space environmental VUV radiation effects. VUV exposure can also be used as part of combined or sequential simulated space environmental exposures to determine combined damaging effects with other aspects of the space environment, which include solar ultraviolet radiation, solar flare x-rays, electron and proton radiation, atomic oxygen (for low-Earth-orbit missions), and temperature effects. Because the wavelength sensitivity of VUV damage is not well known for most materials, Glenn's VUV facility uses a broad-spectrum deuterium lamp with a magnesium fluoride window that provides output between 115 and 200 nm. Deuterium lamps of this type were characterized by the National Institute of Standards and Technology and through measurements at Glenn. Spectral irradiance measurements show that from approximately 115 to 160 nm, deuterium lamp irradiance can be many times that of air mass zero solar irradiance, and as wavelength increases above approximately 160 nm, deuterium lamp irradiance decreases in comparison to the Sun. The facility is a cryopumped vacuum chamber that achieves a system pressure of approximately 5310(exp -6) torr. It contains four individual VUV-exposure compartments in vacuum, separated by water-cooled copper walls to minimize VUV radiation and any sample contamination cross interactions between compartments. Each VUV-exposure compartment contains a VUV deuterium lamp, a motor-controlled sample stage coupled with a moveable cesium iodide VUV phototube, and two thermocouples for temperature measurement. The vacuum chamber and exterior equipment is shown. Each VUV lamp is located at the top of the chamber with its projection-tube pushed through an O-ring compression fitting. The lamp assemblies are located on ports that can be isolated from the rest of the vacuum chamber, permitting maintenance or replacement of the lamps without breaking vacuum in the main chamber where the samples are located. A view of two of the four interior VUV-exposure compartments, including the moveable sample stages and detector holders is also shown. Glenn is using this facility to support testing of Next Generation Space Telescope sunshield materials that is being led by the NASA Goddard Space Flight Center and to develop an understanding of the wavelength, intensity, and temperature dependence of VUV-induced polymer degradation.

Dever, Joyce A.↗

Vibration of a Singly-curved Thin Shell Reflector with a Unidirectional Tension Field

Increased science requirements for space-based instruments over the past few decades have lead to the increased popularity of deployable space structures constructed from thin, lightweight films. Such structures offer both low mass and the ability to be stowed inside conventional launch vehicles. The analysis in this work pertains to large, singly-curved lightweight deployable reflectors commonly used in radar antennas and space telescopes. These types of systems, which can vary a great deal in size, often have frequency requirement that must be met. This work discusses two missions that utilize this type of aperture technology, and then develops a Rayleigh-Ritz model that predicts the natural frequencies and mode shapes for a (nearly) flat and singly-curved reflector with unidirectional in-plane loading. The results are compared with NASTRAN analyses.

singly-curved shell↗

A Deterministic Computational Procedure for Space Environment Electron Transport

A deterministic computational procedure for describing the transport of electrons in condensed media is formulated to simulate the effects and exposures from spectral distributions typical of electrons trapped in planetary magnetic fields. The primary purpose for developing the procedure is to provide a means of rapidly performing numerous repetitive transport calculations essential for electron radiation exposure assessments for complex space structures. The present code utilizes well-established theoretical representations to describe the relevant interactions and transport processes. A combined mean free path and average trajectory approach is used in the transport formalism. For typical space environment spectra, several favorable comparisons with Monte Carlo calculations are made which have indicated that accuracy is not compromised at the expense of the computational speed.

Nealy, John E.↗

Viscoelastic Characterization of Polymers for Deployable Composite Booms

Deployable space structures have been built from thin-walled fiber-reinforced polymer composite materials due to their high specific strength, high specific stiffness, and bistability. However, the inherent viscoelastic behavior of the resin matrix can cause dimensional instability when parts are stored under strain. The extended time of stowage between assembly and deployment in space can result in performance degradation and in the worst case, mission failure. In this study, the viscoelastic properties of candidate commercial polymers for deployable boom structures of solar sails were evaluated. Stress relaxation master curves of the candidate polymers were used to predict the relaxation that would occur in 1 year at room temperature under relatively low strains of ~0.1%. A bismaleimide (BMI) showed less stress relaxation (about 20%) than the baseline Novolac epoxy (about 50%). Carbon fiber composites fabricated with the BMI resin showed a 44% improvement in relaxation compared to the baseline epoxy composite. Other difunctional and tetrafunctional epoxies, thermoplastic, and thermosetting polyimides were also evaluated.

Kang, Jin Ho↗

Maneuvering of large flexible space antennas using optimal discrete-time controllers

The problem of maneuvering large space structures is formulated as a discrete-time, finite-duration optimal regulator problem. Two methods are considered for minimizing the elastic motion during the maneuver. The methods are applied to retargetting maneuver of a large space antenna, and the results are compared with those obtained using bang-bang control. The optimal regulator designed using the model error sensitivity supression method gives the best performance.

Joshi, S. M.↗

The 21st Aerospace Mechanisms Symposium

During the symposium technical topics addressed included deployable structures, electromagnetic devices, tribology, actuators, latching devices, positioning mechanisms, robotic manipulators, and automated mechanisms synthesis. A summary of the 20th Aerospace Mechanisms Symposium panel discussions is included as an appendix. However, panel discussions on robotics for space and large space structures which were held are not presented herein.

Source record↗

Advanced Computational Modeling Approaches for Shock Response Prediction

Motivation: (1) The activation of pyroshock devices such as explosives, separation nuts, pin-pullers, etc. produces high frequency transient structural response, typically from few tens of Hz to several hundreds of kHz. (2) Lack of reliable analytical tools makes the prediction of appropriate design and qualification test levels a challenge. (3) In the past few decades, several attempts have been made to develop methodologies that predict the structural responses to shock environments. (4) Currently, there is no validated approach that is viable to predict shock environments overt the full frequency range (i.e., ~100 Hz to 10 kHz). Scope: (1) Model, analyze, and interpret space structural systems with complex interfaces and discontinuities, subjected to shock loads. (2) Assess the viability of a suite of numerical tools to simulate transient, non-linear solid mechanics and structural dynamics problems, such as shock wave propagation.

Derkevorkian, Armen↗

Metal-rich phosphides RE{sub 5}Ir{sub 19}P{sub 12} with Sc{sub 5}Co{sub 19}P{sub 12} type structure

The iridium-rich phosphides RE{sub 5}Ir{sub 19}P{sub 12} (RE=Sc, Y, La-Nd, Sm-Lu) with Sc{sub 5}Co{sub 19}P{sub 12} type structure, space group P62-bar m were synthesized by solid state reactions of the elements in tantalum crucibles. Well shaped single crystals were obtained in bismuth fluxes. All phosphides were characterized on the basis of X-ray powder data. The structures of RE{sub 5}Ir{sub 19}P{sub 12} with RE=Sc, La, Ce, Dy, Er, Tm, and Yb were refined from single crystal diffractometer data. The complex structure of these phosphides can be described by an intergrowth of simpler ThCr{sub 2}Si{sub 2} and SrPtSb related slabs. Striking structural motifs of the RE{sub 5}Ir{sub 19}P{sub 12} structures are slightly distorted tricapped trigonal prisms of the metal atoms around the phosphorus atoms. The iridium and phosphorus atoms build up three-dimensional [Ir{sub 19}P{sub 12}] polyanionic networks (230-286 pm Ir-P and 282-296 pm Ir-Ir in La{sub 5}Ir{sub 19}P{sub 12}) which leave cavities of coordination numbers 16 and 15 for the rare earth atoms. - Graphical Abstract: The intergrowth structure La{sub 5}Ir{sub 19}P{sub 12}. Highlights: > Metal flux syntheses of intermetallic compounds. > Synthesis and structure of new phosphides RE{sub 5}Ir{sub 19}P{sub 12}. > Crystal chemistry of metal-rich phosphides. > Description of the RE{sub 5}Ir{sub 19}P{sub 12} structure as an intergrowth variant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave Power Beaming Infrastructure for Manned Lightcraft Operations: Part 2

In the past {approx}7 years, microwave gyrotron technology has rapidly evolved to a critical threshold wherein ultra-energetic space launch missions based on beamed energy propulsion (BEP) now appear eminently feasible. Over the next 20 years, hundred megawatt-class microwave power-beaming stations could be prototyped on high deserts and 3- to 4 km mountain peaks before migrating into low Earth orbit, along with their passive microwave relay satellites. Described herein is a 20 GW rechargeable nuclear power satellite and microwave power-beaming infrastructure designed for manned space launch operations in the year 2025. The technological readiness of 2500 GJ superconducting magnetic energy storage 'batteries', 433-m ultralight space structures, 100 MW liquid droplet radiators, 1-6+ MW gyrotron sources, and mega-scale arrays (e.g., 3000 phase-locked units) is addressed. Microwave BEP is 'breakthrough' technology with the very real potential to radically reduce space access costs by factors of 100 to 1000 in the forseeable future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New layered quaternary Zintl pnictide oxides Ba 2 Zn 2 Pn 2 O ( Pn = Sb, Bi): Discovery, crystal structures, band engineering, and transport properties

Three new heteroanionic oxypnictides, Ba 2 Zn 2 Sb 2 O, Ba 2 Zn 2 Bi 2 O, and the solid solution Ba 2 Zn 2 Sb 2−x Bi x O (x ≈ 1.1–1.6), have been synthesized and structurally characterized. They are isostructural with their Mn-bearing analog, adopting the Ba 2 Mn 2 Sb 2 O-type structure (space group P6 3 /mmc, No. 194), and feature a double-layered 2D $^{2}_{∞}$ [Zn 2 Pn 2 O] 2- substructure (Pn = Sb, Bi, Sb/Bi) composed of corner-sharing, distorted tetrahedral ZnPn 3 O units. Electronic structure calculations reveal a systematic progression from semiconducting Ba 2 Zn 2 Sb 2 O to metallic Ba 2 Zn 2 Bi 2 O as Bi content increases. These trends are corroborated by transport property measurements, with Ba 2 Zn 2 Sb 0.9(1) Bi 1.1 O exhibiting relatively low electrical resistivity, high Hall mobilities of ∼160 cm 2 /V·s, and large Seebeck coefficients from 69 to 132 μV K −1 over the 300–600 K temperature range. Comparison with structurally related Zintl pnictides, such as SrIn 2 As 2 and PrZn 3 As 3 phases, situates Ba 2 Zn 2 Pn 2 O (Pn = Sb, Bi) within a broader family of heteroanionic oxypnictide Zintl compounds, highlighting their structural flexibility and amenability to band engineering. Finally, electronic structure and bonding considerations point to tunable semiconducting behavior and underscore the relevance of these materials for thermoelectric and topological applications.

Band engineering↗

Model localization experiments on a ribbed antenna

In this paper, the model localization (ML) phenomenon is investigated experimentally and analytically to determine the influence of its parameters. For this purpose, a full-scale 12-rib loosely-coupled antenna testbed with small imperfections is dynamically tested for various levels of inter-rib coupling stiffness and excitation force. The experimental results are described herein. Using a simplified numerical model of the structure, a sensitivity analysis of the modal behavior is also performed. The numerical and experimental results are shown to agree remarkably well, thereby providing conclusive validation of the ML phenomenon on a testbed having the dynamic characteristics of space structures.

Levine-West, M. B.↗

Generation and comparison of globally isotropic space-filling truss structures

The purposes of this paper are to present a rationale for obtaining space-filling truss structures that behave like a globally isotropic continuum and to use continuum modeling to investigate their relative structural efficiencies (e.g., modulus-to-density, strength-to-density, and part-count-to-volume ratios). The trusses considered herein are generated by replication of a characteristic truss cell uniformly through space. The characteristic cells are categorized by one of a set of possible geometric symmetry groups derived using the techniques of crystallography. The implied elastic symmetry associated with each geometric symmetry group is identified to simplify the task of determining stiffness tailoring rules for guaranteeing global isotropy. Four truss geometries are analyzed to determine stiffness tailoring necessary for isotropy. All geometries exhibit equivalent isotropic Poisson's ratios of 1/4 and equivalent modulus-to-density ratios of 1/6 times the modulus-to-density ratio of the material used in their members. The truss configuration that has the lowest percent difference in member lengths is shown to have the lowest component part-count-to-volume ratios of all geometries considered when compared on a basis of equal stiffness, equal strength, and equal mass.

Lake, Mark S.↗