Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Equilibrium drives of the low and high field side n = 2 plasma response and impact on global confinement

The nature of the multi-modal n=2 plasma response and its impact on global confinement is studied as a function of the axisymmetric equilibrium pressure, edge safety factor, collisionality, and L-versus H-mode conditions. Varying the relative phase (ΔΦ UL ) between upper and lower in-vessel coils demonstrates that different n=2 poloidal spectra preferentially excite different plasma responses. These different plasma response modes are preferentially detected on the tokamak high-field side (HFS) or low-field side (LFS) midplanes, have different radial extents, couple differently to the resonant surfaces, and have variable impacts on edge stability and global confinement. In all equilibrium conditions studied, the observed confinement degradation shares the same ΔΦ UL dependence as the coupling to the resonant surfaces given by both ideal (IPEC) and resistive (MARS-F) MHD computation. Varying the edge safety factor shifts the equilibrium field-line pitch and thus the ΔΦ UL dependence of both the global confinement and the n=2 magnetic response. As edge safety factor is varied, modeling finds that the HFS response (but not the LFS response), the resonant surface coupling, and the edge displacements near the X-point all share the same ΔΦ UL dependence. The LFS response magnitude is strongly sensitive to the core pressure and is insensitive to the collisionality and edge safety factor. This indicates that the LFS measurements are primarily sensitive to a pressure-driven kink-ballooning mode that couples to the core plasma. MHD modeling accurately reproduces these (and indeed all) LFS experimental trends and supports this interpretation. In contrast to the LFS, the HFS magnetic response and correlated global confinement impact is unchanged with plasma pressure, but is strongly reduced in high collisionality conditions in both H- and L-mode. This experimentally suggests the bootstrap current drives the HFS response through the kink-peeling mode drive, though surprisingly weak or no dependence on the bootstrap current is seen in modeling. Instead, modeling is revealed to be very sensitive to the details of the edge current profile and equilibrium truncation. Furthermore, holding truncation fixed, most HFS experimental trends are not captured, thus demonstrating a stark contrast between the robustness of the HFS experimental results and the sensitivity of its computation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synchronous and asynchronous optimized Schwarz methods for one-way subdivision of bounded domains

Convergence of both synchronous and asynchronous optimized Schwarz algorithms for the shifted Laplacian operator on a bounded rectangular domain, in a one-way subdivision of the computational domain, with overlap, is shown. Convergence results are obtained under very mild conditions on the size of the subdomains and on the amount of overlap. A couple of results are also given, relating the convergence rate of the asynchronous method to changes in the size of the domain. Numerical experiments illustrate the theoretical results.

97 MATHEMATICS AND COMPUTING↗

Complicated Magnetic Phases and Presence of Exchange Bias in Off-Stoichiometric Mn{sub 50}Ni{sub 25 + x}In{sub 25−x} Heusler Alloys

The martensitic transformation (MT), magnetic phases, and exchange bias (EB) effect in Mn{sub 50}Ni{sub 25 + x}In{sub 25−x} (x = 14.5∼18) Heusler alloys have been investigated. The MT and magnetic state can be tuned significantly by modifying the Ni/In ratio, while the Curie temperature (T{sub C}) remains almost unchanged. With increase of the Ni/In ratio, the ferromagnetic components in the studied samples decrease continuously, while the antiferromagnetic components increase and it therefore enhances the exchange interaction as well. All of the samples exhibit negative horizontally shifted loops after field-cooled procedure. In addition, the samples with the compositional range of 15 ≤ x ≤ 16 also present the EB effect in zero field-cooled condition. To evaluate the causes of this scenario, EB field and coercive field as a function of temperature and cooling field have been investigated. The experimental results imply that the spin reconfiguration of superspin glass (SSG) clusters and the competition between antiferromagnetic and ferromagnetic interactions can account for the behavior of EB effect.

36 MATERIALS SCIENCE↗

Influence of Molybdenum on Rapid Solidification Microstructure and Microsegregation in Primary Ferrite Solidified Stainless Steel

Due to the widespread use and familiarity of austenitic stainless steels in many industries these alloys are often the first materials used when adapting new processing techniques. The rapid cooling and solidification rates that occur during fusion based additive manufacturing processes like powder bed fusion cause a fundamental shift in the solidification behavior of the material. While the effects that Cr and Ni have on the microstructure have been fairly well documented across a range of solidification conditions, the impact of alloying elements like Mo are not as well understood at rapid solidification rates. For this study, four custom stainless steel alloy feedstocks were made with targeted modification of the Cr and Mo concentrations to maintain a constant Cr/Ni eq ratio of ~1.7. Two-piston splat quenching was used to produce rapidly solidified samples and the solidification mode, phase, and cell size were investigated. Solidification rates were estimated to be between 0.4 and 1.5m/s. A comparison of the microsegregation and partitioning behavior of Cr, Ni and Mo in ferrite solidified material was also performed for the different alloy compositions. Variations of the Mo concentration between each feedstock showed no measurable influence on the solidification/cooling rates, solidification morphology, or the partitioning of Mo. Furthermore, higher concentrations of Mo were found to significantly increase the amount of ferrite phase in the microstructure by suppressing the ferrite to austenite massive transformation.

36 MATERIALS SCIENCE↗

Evaluation of Mn and Sn-Modified Pd-Ce-Based Catalysts for Low-Temperature Diesel Exhaust Oxidation

Pd-impregnated Ce-based catalysts were tested for carbon monoxide (CO) and hydrocarbon (HC) oxidation under challenging low-temperature diesel combustion conditions. The results indicate that the light-off temperatures for CO over Pd/CeO 2 , Pd/MnO x -CeO 2 (Pd/MC), and Pd/SnO 2 -MnO x -CeO 2 (Pd/SMC) catalysts shift to higher temperatures in the presence of simulated diesel exhaust gas. The lowest T 50 for CO is observed over Pd/MC at 173 °C, whereas Pd/CeO 2 is shown to oxidize most of the HCs at temperatures below 400 °C. In all catalysts, the oxidation of HCs starts right after the onset of CO oxidation, revealing that the competitive adsorption of CO, NO, and alkenes controls the catalytic activity. Further evaluation of the catalytic activity in the presence of only CO and C 3 H 6 reveals the immediate inhibiting effect of C 3 H 6 at catalyst temperatures below 150 °C. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments performed over Pd/CeO 2 , Pd/MC, and Pd/SMC show that C 3 H 6 inhibits the formation of carbonyl species on Pd n+ sites, which limits the catalytic activity for CO. Lastly, such inhibition is observed on all supports, implying that the activity is independent of oxygen storage capacity (OSC) or lattice oxygen reducibility of the supports in the presence of C 3 H 6 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterisation of radiation damage in W and W-based alloys from 2MeV self-ion near-bulk implantations

The displacement damage induced in bulk W and W-5 wt.% Re and W-5 wt.% Ta alloys by 2 MeV W + irradiation to doses 3.3×10 17 - 2.5×10 19 W + /m 2 at temperatures ranging from 300 to750°C has been characterized by transmission electron microscopy. An automated sizing and counting approach based on Image J has been proposed and performed for all irradiation data. In all cases the damage comprised dislocation loops, mostly of interstitial type, with Burgers vectors b = ½<111> (> 60%) and b = <100>. The diameters of loops did not exceed 20 nm, with the majority being ≤ 6 nm. The loop number density varied between 10 22 and 10 23 loops/m 3 . With increasing irradiation temperature, the loop size distributions shifted towards larger sizes, and there was a substantial decrease in loop number densities. The damage microstructure was less sensitive to dose than to temperature. Under the same irradiation conditions, loop number densities in the alloys were higher than in pure W but loops were smaller. In grains with normals close to z = <001>, loop strings developed in W at temperatures ≥ 500°C and doses ≥ 1.2 dpa, but such strings were not observed in the W-Re or W-Ta alloys. However, in other grain orientations complex structures appeared in all materials and dense dislocation networks formed at higher doses.

36 MATERIALS SCIENCE↗

Hydration of C{sub 3}S thin films

Thin films of C{sub 3}S of a few tens of nanometers were produced by electron beam evaporation. After verification that the chemical composition of the bulk material remained unchanged, the samples were hydrated with water vapor in a reaction chamber under saturated pressure and temperature conditions, and were kept isolated from atmospheric exposure throughout the whole duration of the experiment. Analyses by X-ray photoelectron spectroscopy at different stages of hydration evidence a shift of the Si peaks to higher energies and a subsequent decrease of the Ca-Si binding energy distance, indicating silicate polymerization expected upon formation of C-S-H. The measured molar Ca/Si ratio evolves from that of a jennite-like material, of about 1.55, at the beginning of the experiment (attributed to pre-hydration of the thin films), to a tobermorite-like ratio of 0.85 after 3 h of hydration.

36 MATERIALS SCIENCE↗

Fast Pyrolysis of Opuntia ficus-indica (Prickly Pear) and Grindelia squarrosa (Gumweed)

Opuntia ficus-indica (prickly pear) and Grindelia squarrosa (gumweed) are two exceptionally drought tolerant plant species capable of growing in arid and semiarid environments. Additionally, they have unique cell wall structures. Prickly pear contains pectin and high levels of ash (16.1%) that is predominantly Ca and K. Gumweed has high levels of extractives that contain grindelic acid and monoterpenoids. The objective of this paper was to evaluate how these unique cell wall components alter the pyrolysis performance of prickly pear and gumweed. Using a tandem micropyrolyzer with GC-MS/FID/TCD, a detailed account of the product slate is given for products generated between 450 and 650 degrees C. Pyrolysis of prickly pear showed that the high levels of ash increase the amount of organics volatilized and shifted product pools, making it possible to generate up to 7.3% carbonyls vs 3.8% for Pinus taeda (loblolly pine) and 10.5% hydrocarbons vs 1.8% for pine depending on reaction conditions. Pyrolysis of gumweed showed that the extractives were volatilized at low temperatures and led to 17.7% grindelic acid and monoterpenoids derivatives in the condensed vapor phase. In conclusion, at high temperatures, the extractives and other biomass components are converted to aromatics and C 5 -C 10 hydrocarbons, giving a total yield of 16.6%, and also generate large amounts of C 2 -C 4 hydrocarbons, 11.3%.

09 BIOMASS FUELS↗

Flow-Assisted Selective Mineral Extraction from Seawater

The sustainable production of critical materials from natural sources requires a paradigm shift away from currently used resource-intensive processes. In this paper, we report a single-step, laminar co-flow method (LCM) that leverages non-equilibrium conditions to selectively extract pure Mg(OH) 2 from natural seawater. Conventional seawater-based Mg extraction involves adding individual or a combination of precipitants to obtain Mg(OH) 2 , but the co-existence of Ca 2+ unavoidably results in CaCO 3 impurities requiring additional purification steps. Here we show that the non-equilibrium conditions in LCM achieved using a microfluidics device and by simply co-injecting a NaOH solution with seawater can result in improved selectivity for Mg(OH) 2 unlike in conventional bulk mixing method. The resulting precipitates are characterized for composition and the process yield and purity are optimized through systematic variations of the reaction time and the concentration of NaOH. This is the first demonstration of LCM for selective separation, and as a one-step process that does not rely on novel sorbents, membranes, or external stimuli, it is easy to scale-up. LCM has the potential to be broadly relevant to selective separations from complex feed streams and diverse chemistries—enabling more sustainable materials extraction and processing.

54 ENVIRONMENTAL SCIENCES↗

The Diurnal Dynamics of Gross Primary Productivity Using Observations From the Advanced Baseline Imager on the Geostationary Operational Environmental Satellite‐R Series at an Oak Savanna Ecosystem

Gross primary productivity (GPP) is the largest flux in the global carbon cycle and satellite-based GPP estimates have long been used to study the trends and interannual variability of GPP. With recent updates to geostationary satellites, we can now explore the diurnal variability of GPP at a comparable spatial resolution to polar-orbiting satellites and at temporal frequencies comparable to eddy covariance (EC) tower sites. We used observations from the Advanced Baseline Imager on the Geostationary Operational Environmental Satellite-R series (GOES-R) to test the ability of subdaily satellite data to capture the shifts in the diurnal course of GPP at an oak savanna EC site in California, USA that is subject to seasonal soil moisture declines. We compared three methods to estimate GPP: (a) a light-use efficiency model, (b) a linear relationship between the product of near-infrared reflectance of vegetation and photosynthetically active radiation (LIN-NIR v P) and EC tower GPP, and (c) a light response curve (LRC-NIR v P) between NIR v P and EC GPP. The LRC-NIR v P achieved the lowest mean absolute error for winter (2 µmol CO 2 m –2 s –1 ), spring (2.51 µmol CO 2 m –2 s –1 ), summer (1.43 µmol CO 2 m –2 s –1 ), and fall (1.35 µmol CO 2 m –2 s –1 ). The ecosystem experienced the largest shift in daily peak GPP in relation to the peak of incoming solar radiation toward the morning hours during the dry summers. The LRC-NIRvP and the light-use efficiency model were in agreement with these patterns of a shift in peak daily GPP toward the morning hours during summer. Our results can help develop diurnal estimates of GPP from geostationary satellites that are sensitive to fluctuating environmental conditions during the day.

54 ENVIRONMENTAL SCIENCES↗

Reactive CO 2 capture via controlled amine speciation in non-aqueous electrolytes

Current efforts to integrate CO 2 capture and electrochemical conversion (reactive capture) are often performed under aqueous conditions, resulting in undesired hydrogen evolution and reliance on precious metal catalysts and pure CO 2 streams. Here, in this study, we explore reactive capture in aprotic media. By shifting the amine–CO 2 adduct speciation to carbamic acid (instead of carbamate) in dimethyl sulfoxide, we increased CO 2 uptake threefold compared with an aqueous medium, suppressing hydrogen evolution and supporting a 78% Faradaic efficiency towards CO over an earth-abundant zinc catalyst. Under simulated high-oxygen-content flue gas (17% CO 2 , 17% O 2 , 66% N 2 ), we also obtained up to 43% CO Faradaic efficiency over multiple capture–conversion cycles. Our findings showcase the confluence of reactant speciation, electrolyte composition and electrocatalyst design in enabling selective and active electrochemical transformations.

Gomes, Reginaldo J. [Univ. of Chicago, IL (United ↗

Equilibrium and stability in a heliotron with anisotropic hot particle slowing-down distribution

The equilibrium and linear fluid Magnetohydrodynamic (MHD) stability in an inward-shifted large helical device heliotron configuration are investigated with the 3D ANIMEC and TERPSICHORE codes, respectively. A modified slowing-down distribution function is invoked to study anisotropic pressure conditions. An appropriate choice of coefficients and exponents allows the simulation of neutral beam injection in which the angle of injection is varied from parallel to perpendicular. The fluid stability analysis concentrates on the application of the Johnson-Kulsrud-Weimer energy principle. The growth rates are maximum at <{beta}>{approx}2%, decrease significantly at <{beta}>{approx}4.5%, do not vary significantly with variations of the injection angle and are similar to those predicted with a bi-Maxwellian hot particle distribution function model. Stability is predicted at <{beta}>{approx}2.5% with a sufficiently peaked energetic particle pressure profile. Electrostatic potential forms from the MHD instability necessary for guiding centre orbit following are calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A mixed quantum-classical Liouville study of the population dynamics in a model photo-induced condensed phase electron transfer reaction

We apply two approximate solutions of the quantum-classical Liouville equation (QCLE) in the mapping representation to the simulation of the laser-induced response of a quantum subsystem coupled to a classical environment. These solutions, known as the Poisson Bracket Mapping Equation (PBME) and the Forward-Backward (FB) trajectory solutions, involve simple algorithms in which the dynamics of both the quantum and classical degrees of freedom are described in terms of continuous variables, as opposed to standard surface-hopping solutions in which the classical degrees of freedom hop between potential energy surfaces dictated by the discrete adiabatic state of the quantum subsystem. The validity of these QCLE-based solutions is tested on a non-trivial electron transfer model involving more than two quantum states, a time-dependent Hamiltonian, strong subsystem-bath coupling, and an initial energy shift between the donor and acceptor states that depends on the strength of the subsystem-bath coupling. In particular, we calculate the time-dependent population of the photoexcited donor state in response to an ultrafast, on-resonance pump pulse in a three-state model of an electron transfer complex that is coupled asymmetrically to a bath of harmonic oscillators through the optically dark acceptor state. Within this approach, the three-state electron transfer complex is treated quantum mechanically, while the bath oscillators are treated classically. When compared to the more accurate QCLE-based surface-hopping solution and to the numerically exact quantum results, we find that the PBME solution is not capable of qualitatively capturing the population dynamics, whereas the FB solution is. However, when the subsystem-bath coupling is decreased (which also decreases the initial energy shift between the donor and acceptor states) or the initial shift is removed altogether, both the PBME and FB results agree better with the QCLE-based surface-hopping results. These findings highlight the challenges posed by various conditions such as a time-dependent external field, the strength of the subsystem-bath coupling, and the degree of asymmetry on the accuracy of the PBME and FB algorithms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Note: O-ring stack system for electron gun alignment

We present a reliable method for aligning an electron gun which consists of an electron source and lenses by controlling a stack of rubber O-rings in a vacuum condition. The beam direction angle is precisely tilted along two axes by adjusting the height difference of a stack of O-rings. In addition, the source position is shifted in each of three orthogonal directions. We show that the tilting angle and linear shift along the x and y axes as obtained from ten stacked O-rings are ±2.55° and ±2 mm, respectively. This study can easily be adapted to charged particle gun alignment and adjustments of the flange position in a vacuum, ensuring that its results can be useful with regard to electrical insulation between flanges with slight modifications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiple-scale analysis for resonance reflection by a one-dimensional rectangular barrier in the Gross-Pitaevskii problem

We consider a quantum above-barrier reflection of a Bose-Einstein condensate by a one-dimensional rectangular potential barrier, or by a potential well, for nonlinear Schroedinger equation (Gross-Pitaevskii equation) with a small nonlinearity. The most interesting case is realized in resonances when the reflection coefficient is equal to zero for the linear Schroedinger equation. Then the reflection is determined only by small nonlinear term in the Gross-Pitaevskii equation. A simple analytic expression has been obtained for the reflection coefficient produced only by the nonlinearity. An analytical condition is found when common action of potential barrier and nonlinearity produces a zero reflection coefficient. The reflection coefficient is derived analytically in the vicinity of resonances which are shifted by nonlinearity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical control of Faraday rotation in hot Rb vapor

We demonstrate controlled polarization rotation of an optical field conditional on the presence of a second field. Induced rotations of greater than {pi}/2 rad are seen with a transmission of 95%, corresponding to a ratio of phase shift to absorption of 40{pi}. This combination of large, controlled rotation and low loss is well suited for the manipulation of light pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗