Search NASA⌕ Search

SEARCH · Search NASA

Results for “data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Structure and kinematics of the broad-line regions in active galaxies from IUE variability data

IUE archival data are used here to investigate the structure nad kinematics of the broad-line regions (BLRs) in nine AGN. It is found that the centroid of the line-continuum cross-correlation functions (CCFs) can be determined with reasonable reliability. The errors in BLR size estimates from CCFs for irregularly sampled light curves are fairly well understood. BLRs are found to have small luminosity-weighted radii, and lines of high ionization tend to be emitted closer to the central source than lines of low ionization, especially for low-luminosity objects. The motion of the gas is gravity-dominated with both pure inflow and pure outflow of high-velocity gas being excluded at a high confidence level for certain geometries.

Koratkar, Anuradha P.↗

Damage detection in elastic structures using vibratory residual forces and weighted sensitivity

A methodology is presented for detecting structural damage in elastic structures by nondestructive means. Measured modal test data along with a correlated analytical structural model are used to locate potentially damaged regions using residual modal force vectors and to conduct a weighted sensitivity analysis to assess the extent of mass and/or stiffness variations, where damage is characterized as a stiffness reduction. The current approach is unique among other approaches in that it accounts for (1) variations in system mass, system stiffness, and mass center (locations), (2) perturbations of both the natural frequencies and modal vectors, and (3) statistical confidence factors for the structural parameters and potential experimental instrumentation error. Moreover, this procedure can be used with either full or reduced models. A wide variety of numerical examples are presented that show that the current method provides a precise indication of both the location and the extent of structural damage.

Ricles, J. M.↗

Effect of initial conditions on secondary vortex structure in mixing layers

An experimental research project aimed at obtaining quantitative data on the behavior of the secondary vortex structure in a turbulent mixing layer at moderate Reynolds numbers (Re(sub delta) = 2.9 x 10(exp 4)) is discussed. This project was terminated before all the contemplated measurements could be made, and data were obtained only on the spatially stationary part of the secondary structure. Nonetheless, these data reveal some interesting facets of mixing layer behavior which are discussed.

Bell, J. H.↗

Simplifying Analysis of Hierarchical HDF5 and NetCDF4 Files with Xarray-Datatree

NASA’s Earth Observing System Data and Information System (EOSDIS) contains thousands of Earth science datasets from satellites, models, and field campaigns. EOSDIS data are stored in formats that are well supported by the Earth Science community. These formats include the Hierarchical Data Format (HDF), with derivative flavors such as HDF-5 and the Network Common Data Format (NetCDF-4). The HDF specification allows for a directory-like hierarchy within a single file, known as "groups". Observational data and associated metadata within a single file can be distributed amongst multiple internal groups, which can also be nested to multiple levels. Working with datasets that have a group hierarchical structure can be difficult because of the nested structure of groups. Widely used packages, such as xarray, have data models that do not accommodate the hierarchical structure within HDF files, requiring users to traverse the file and open different HDF groups as separate, unrelated objects. Xarray-datatree is a Python package developed to solve the difficulty of traversing HDFs with a hierarchical group structure by creating a tree-like hierarchical data structure in xarray. The tree-like structure allows each group to be accessed once a DataTree object is instantiated. The migration of xarray-datatree into the xarray core library will reduce barriers to accessing Earth science data by eliminating the need to understand and traverse the specific hierarchy of a grouped HDF file.

Eni Awowale↗

Remote, PCM-controlled, multi-channel radio frequency FM telemetry system for cryogenic wind tunnel application

A telemetry system used in the NASA-Langley cryogenic transonic wind tunnel to obtain rotational strain and temperature data is described. The system consists of four FM transmitters allowing for a remotely controlled PCM combination. A rotating four-contact mercury slip-ring is used as an interface between the fixed and rotating mechnical structures. Over 60 channels of data on the main fan disk and blade structures have been obtained. These data are studied to verify computer predictions and mechanical life. A series of block diagrams are included.

Diamond, John K.↗

Data dependent systems methodology for lumped mass modeling of structures

Limitations of the frequency domain methods in analyzing structura1 vibrations has created an awareness of the comparative merits of the time domain methods. Although time domain methods would be ideal for modeling large precisions space systems, the popular methods based on fitting theoretical response to actual data by least squares are too sensitive to noise and require too much data to be suitable for orbiting space crafts. This paper briefly reviews the theory and illustrative applications of a time domain methodology called Data Dependent Systems (DDS) that eliminates these limitations. Simulation results are presented to demonstrate a better than 4-place accuracy in the identifications of all system parameters, both modal (frequencies, damping ratios, and mode shapes) and physical (mass, stiffness, and damping matrices).

Pandit, Sudhakar M.↗

Lunar velocity structure and compositional and thermal inferences

Seismic data from Apollo Passive Seismic Network stations are analyzed to determine the velocity structure in the lunar crust and mantle. Since the publication of earlier results additional data has become available from the S-IVB impacts of the Apollo 16 and 17 missions and the LM ascent stage impact of the Apollo 17 mission. Data from these artificial impacts now cover a distance range of 9 to 1700 km. Travel times, amplitudes, and theoretical seismograms are used to derive a velocity structure for the outer 150 km of the moon. Preliminary results are given from the analysis of the complete set of seismograms.

Toksoz, M. N.↗

Three-Dimensional High-Order Spectral Finite Volume Method for Unstructured Grids

Many areas require a very high-order accurate numerical solution of conservation laws for complex shapes. This paper deals with the extension to three dimensions of the Spectral Finite Volume (SV) method for unstructured grids, which was developed to solve such problems. We first summarize the limitations of traditional methods such as finite-difference, and finite-volume for both structured and unstructured grids. We then describe the basic formulation of the spectral finite volume method. What distinguishes the SV method from conventional high-order finite-volume methods for unstructured triangular or tetrahedral grids is the data reconstruction. Instead of using a large stencil of neighboring cells to perform a high-order reconstruction, the stencil is constructed by partitioning each grid cell, called a spectral volume (SV), into 'structured' sub-cells, called control volumes (CVs). One can show that if all the SV cells are partitioned into polygonal or polyhedral CV sub-cells in a geometrically similar manner, the reconstructions for all the SVs become universal, irrespective of their shapes, sizes, orientations, or locations. It follows that the reconstruction is reduced to a weighted sum of unknowns involving just a few simple adds and multiplies, and those weights are universal and can be pre-determined once for all. The method is thus very efficient, accurate, and yet geometrically flexible. The most critical part of the SV method is the partitioning of the SV into CVs. In this paper we present the partitioning of a tetrahedral SV into polyhedral CVs with one free parameter for polynomial reconstructions up to degree of precision five. (Note that the order of accuracy of the method is one order higher than the reconstruction degree of precision.) The free parameter will be determined by minimizing the Lebesgue constant of the reconstruction matrix or similar criteria to obtain optimized partitions. The details of an efficient, parallelizable code to solve three-dimensional problems for any order of accuracy are then presented. Important aspects of the data structure are discussed. Comparisons with the Discontinuous Galerkin (DG) method are made. Numerical examples for wave propagation problems are presented.

Liu, Yen↗

Vertical structure and size distributions of Martian aerosols from solar occultation measurements

Phobos 2 spectrometer measurements of solar occultations close to the evening terminator have furnished data on the vertical structure of the Martian aerosols near the northern spring equinox. Since the thermal structure derived from saturated IR profiles of water vapor does not allow the reaching of the CO2 frost point at cloud altitudes, said clouds' particles may be formed by H2O ice. Dust was also monitored at two wavelengths; it is assumed that the dust particles are levitated by eddy mixing. A parallel is drawn between these thin clouds and the polar mesospheric clouds observed on earth.

Chassefiere, E.↗

Solar corona photography, part B

Photographic observations of the solar corona by the Apollo 16 command module pilot while in lunar orbit are reported. These were designed to provide data on outer coronal forms and intensities to elongation angles of 25 deg. The results of Apollo 15 solar corona photography verified the procedures and provided the first photographs of identifiable coronal streamers curving at elongation angles of some 10 deg. By using the Apollo 15 data, exposure settings were optimized for Apollo 16, and the results show a significant improvement in photometric quality over the large range of brightness to be photographed. Ground observations of the inner solar corona (to approximately 2 solar radii from Sun center) indicate a general lack of coronal structure, and results of data reduction thus far show no streamer structure at large elongation angles.

Macqueen, R. M.↗

Do the Arching HI Filaments Show in Local Reddening Data?

Probable dust counterparts of arching structures are investigated in two cases: (1) the Eridanus expanding shell; and (2) the extended Sco-Cen feature. Color excess data may be used to derive distance and dimension estimates of these structures. Color excesses from two areas SA 121 and SA 144 situated on the position of the 3.2 to 6.3 km/s velocity-slice are applied. Some stratification of the color excesses is noticed for both areas but extreme patchiness typifies particularly the dust in the SA 144 region.

Knude, J.↗

Structural similitude and design of scaled down laminated models

The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.

Simitses, G. J.↗

Discrete shaped strain sensors for intelligent structures

Design of discrete, highly distributed sensor systems for intelligent structures has been studied. Data obtained indicate that discrete strain-averaging sensors satisfy the functional requirements for distributed sensing of intelligent structures. Bartlett and Gauss-Hanning sensors, in particular, provide good wavenumber characteristics while meeting the functional requirements. They are characterized by good rolloff rates and positive Fourier transforms for all wavenumbers. For the numerical integration schemes, Simpson's rule is considered to be very simple to implement and consistently provides accurate results for five sensors or more. It is shown that a sensor system that satisfies the functional requirements can be applied to a structure that supports mode shapes with purely sinusoidal curvature.

Andersson, Mark S.↗

Recent Updates to the CFD General Notation System (CGNS)

The CFD General Notation System (CGNS) - a general, portable, and extensible standard for the storage and retrieval of computational fluid dynamics (CFD) analysis data has been in existence for more than a decade (Version 1.0 was released in May 1998). Both structured and unstructured CFD data are covered by the standard, and CGNS can be easily extended to cover any sort of data imaginable, while retaining backward compatibility with existing CGNS data files and software. Although originally designed for CFD, it is readily extendable to any field of computational analysis. In early 2011, CGNS Version 3.1 was released, which added significant capabilities. This paper describes these recent enhancements and highlights the continued usefulness of the CGNS methodology.

Rumsey, Christopher L.↗

IRAF in the nineties

The Interactive Data Reduction and Analysis Facility (IRAF) data reduction and analysis system has been around since 1981. Today it is a mature system with hundreds of applications, and is supported on all the major platforms. Many institutions, projects, and individuals around the US and around the world have developed software for IRAF. Some of these packages are comparable in size to the IRAF core system itself. IRAF is both a data analysis system, and a programming environment. As a data analysis system it can be easily installed by a user at a remote site and immediately used to view and process data. As a programming environment IRAF contains a wealth of high and low level facilities for developing new applications for interactive and automated processing of astronomical or other data. As important as the applications programs and user interfaces are to the scientist using IRAF, the heart of the IRAF system is the programming environment. The programming environment determines to a large extent the types of applications which can be built within IRAF, what they will look like, and how they will interact with one another and with the user. While applications can be easily added to or removed from a software system, the programming environment must remain fairly stable, with carefully planned evolution and growth, over the lifetime of a system. The IRAF programming environment is the framework on which the rest of the IRAF system is built. The IRAF programming environment as it exists in 1992, and the work currently underway to enhance the environment are discussed. The structure of the programming environment as a class hierarchy is discussed, with emphasis on the work being done on the image data structures, graphics and image display interfaces, and user interfaces. The new technologies which we feel IRAF must deal with successfully over the coming years are discussed. Finally, a preview of what IRAF might look like to the user by the end of the decade is presented.

Tody, D.↗

Dynamics and control of large space structures

An attempt is made to gather data useful to investigators in the fields of large space structure dynamics and control modeling, design and testing. Attention is given to structural dynamics and its relationship to such allied engineering fields as flutter analysis, as well as to problems in the prediction of atmospheric density at orbital altitude. The first challenge posed by large space structure control is the design of control systems with natural frequencies above several major structural frequencies. The establishment of a sufficiently accurate structural model, plant excitation, and shape maintenance, are noted to be additional problems.

Nurre, G. S.↗

Maximum Likelihood Estimation with Emphasis on Aircraft Flight Data

Accurate modeling of flexible space structures is an important field that is currently under investigation. Parameter estimation, using methods such as maximum likelihood, is one of the ways that the model can be improved. The maximum likelihood estimator has been used to extract stability and control derivatives from flight data for many years. Most of the literature on aircraft estimation concentrates on new developments and applications, assuming familiarity with basic estimation concepts. Some of these basic concepts are presented. The maximum likelihood estimator and the aircraft equations of motion that the estimator uses are briefly discussed. The basic concepts of minimization and estimation are examined for a simple computed aircraft example. The cost functions that are to be minimized during estimation are defined and discussed. Graphic representations of the cost functions are given to help illustrate the minimization process. Finally, the basic concepts are generalized, and estimation from flight data is discussed. Specific examples of estimation of structural dynamics are included. Some of the major conclusions for the computed example are also developed for the analysis of flight data.

Iliff, K. W.↗

Application of Powder Diffraction Methods to the Analysis of the Atomic Structure of Nanocrystals: The Concept of the Apparent Lattice Parameter (ALP)

The applicability of standard methods of elaboration of powder diffraction data for determination of the structure of nano-size crystallites is analysed. Based on our theoretical calculations of powder diffraction data we show, that the assumption of the infinite crystal lattice for nanocrystals smaller than 20 nm in size is not justified. Application of conventional tools developed for elaboration of powder diffraction data, like the Rietveld method, may lead to erroneous interpretation of the experimental results. An alternate evaluation of diffraction data of nanoparticles, based on the so-called 'apparent lattice parameter' (alp) is introduced. We assume a model of nanocrystal having a grain core with well-defined crystal structure, surrounded by a surface shell with the atomic structure similar to that of the core but being under a strain (compressive or tensile). The two structural components, the core and the shell, form essentially a composite crystal with interfering, inseparable diffraction properties. Because the structure of such a nanocrystal is not uniform, it defies the basic definitions of an unambiguous crystallographic phase. Consequently, a set of lattice parameters used for characterization of simple crystal phases is insufficient for a proper description of the complex structure of nanocrystals. We developed a method of evaluation of powder diffraction data of nanocrystals, which refers to a core-shell model and is based on the 'apparent lattice parameter' methodology. For a given diffraction pattem, the alp values are calculated for every individual Bragg reflection. For nanocrystals the alp values depend on the diffraction vector Q. By modeling different a0tomic structures of nanocrystals and calculating theoretically corresponding diffraction patterns using the Debye functions we showed, that alp-Q plots show characteristic shapes which can be used for evaluation of the atomic structure of the core-shell system. We show, that using a simple model of a nanocrystal with spherical shape and centro-symmetric strain at the surface shell we obtain theoretical alp-Q values which match very well the alp-Q plots determined experimentally for Sic, GaN, and diamond nanopowders. The theoretical models are defined by the lattice parameter of the grain core, thickness of the surface shell, and the magnitude and distribution of the strain field in the surface shell. According to our calculations, the part of the diffraction pattern measured at relatively low diffraction vectors Q (below 10/angstrom) provides information on the surface strain, whle determination of the lattice parameters in the grain core requires measurements at large Q-values (above 15 - 20/angstrom).

Palosz, B.↗