Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

A polarity-driven nanometric luminescence asymmetry in AlN/GaN heterostructures

Group III Nitrides nanowires are well suited materials for the design of light emitting devices. The internal electric field created by spontaneaous and piezoelectric polarizations in these materials poses some difficulties, but also possible solutions, towards this goal. Here, we report on the high spatial asymmetry of the cathodoluminescence intensity across a GaN quantum well embedded in an AlN nanowire, when a 60 keV, 1 nm wide electron beam is scanned over this heterostructure. This asymmetry is remarkable between positions at different sides of the quantum well. We interpret this asymmetry as originating from the different drift directions of carriers due to the internal electric field. This interpretation is corroborated by the direct determination of the polarity with convergent beam electron diffraction. A precise knowledge of hole mobility and diffusion coefficients would allow an estimate of the electric field in the AlN segment of the nanowire.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An ab initio model for the modulation of galactic cosmic-ray electrons

The modulation of galactic cosmic-ray electrons is studied using an ab initio three-dimensional steady state cosmic-ray modulation code in which the effects of turbulence on both the diffusion and drift of these cosmic-rays are treated as self-consistently as possible. A significant refinement is that a recent two-component turbulence transport model is used. This model yields results in reasonable agreement with observations of turbulence quantities throughout the heliosphere. The sensitivity of computed galactic electron intensities to choices of various turbulence parameters pertaining to the dissipation range of the slab turbulence spectrum, and to the choice of model of dynamical turbulence, is demonstrated using diffusion coefficients derived from the quasi-linear and extended nonlinear guiding center theories. Computed electron intensities and latitude gradients are also compared with spacecraft observations.

79 ASTRONOMY AND ASTROPHYSICS↗

ReaxFF molecular dynamics simulations on the structure and dynamics of electrolyte water systems at ambient temperature

Here, ReaxFF molecular dynamics simulations have been performed to study the effect of cations Li + , Na+ and K + and anion Cl - on the structural and dynamical properties of water, using the force field recently developed by Fedkin and co-workers. The structural relationship of ion and water has been analyzed from the radial distribution function and angular distribution. Comparisons of ReaxFF angle variation of ions and water within the first solvation shell were made and found to be in good agreement with literature. The disruption of hydrogen bond network of water by ions is elucidated by ion-water residence times, water-water hydrogen bond dynamics and reorientational dynamics. ReaxFF diffusion coefficient and residence times of electrolyte water system were compared with ab initio and non-reactive potentials to analyze the difference in dynamics. We gained insight into the ion interaction with water and how it can accelerate or decelerate water dynamics. ReaxFF outlines the formation and dissolution of metal hydroxides and metal chlorides over the course of simulation to explain the diffusion dynamics of water in salt solutions, allowing us to elucidate the impact of concentration on the self-diffusivity of water and ions in solutions, and to reveal that this effect always decreases the mobility and is not at all ion-specific. The obtained findings have opened new opportunities to extend the ReaxFF methodology towards systems involving electrolytes.

42 ENGINEERING↗

Tritium diffusion in V4Cr-4Ti alloy

Characteristics of the tritium diffusion coefficient DT in V-4Cr-4Ti alloy, including a bending in the Arrhenius plot of DT, are examined. Based on a trap model, the possible trap sources and their binding energies for tritium in the alloy are evaluated using the experimental data of DT in pure V, which are measured with a tritium tracer method, and the literature data of protium diffusion in V-Ti and V-Cr alloys. The result of the evaluation suggests the presence of two trap sources in the alloy. The first would be attributed to a trap at each substitutional alloying atom which is likely to be Ti. The binding energy E{sub B} of 0.08 eV gives the best fit to the observed value of DT above 300 K The bending in the Arrhenius plot below 300 K is caused by a second trap site with a higher E and a lower concentration than those of each alloying atom. The trap is probably formed by the alloying atoms presence to neighboring Ti atoms. The contribution of Cr atom to the trap effect seems to be rather small in this alloy. (authors)

36 MATERIALS SCIENCE↗

Water-lubricated intercalation in V2O5·nH2O for high-capacity and high-rate aqueous rechargeable zinc batteries

Co-intercalation is an effective approach to tune the diffusion coefficient with which cations insert into the electrodes for energy storage devices. By applying this concept in aqueous Zn batteries, a prospective system for stationary energy storage, we demonstrate the critical role of structural H2O on Zn2+ intercalation into bilayer V2O5·nH2O. The H2O solvation of Zn2+ largely reduces its effective charge and thus electrostatic interaction with the V2O5 framework, evidently promoting the diffusion of solvated Zn2+. Benefited from the ‘lubricating’ effect, the aqueous Zn battery shows a specific energy of ~ 305 Wh kg-1 (based on cathode), comparable to those of LiCoO2//Graphite batteries. Meanwhile, it can maintain an energy density of 199 Wh kg-1 at a high power density of 24 kW kg-1 with a capacity retention of 88% after 900 cycles, making it a promising candidate for high-performance, low-cost, safe and environmentally friendly energy storage device.

Yan, Mengyu↗

Selenium infiltrated hierarchical hollow carbon spheres display rapid kinetics and extended cycling as lithium metal battery (LMB) cathodes

Lithium metal–selenium (Li–Se) batteries offer high volumetric energy but are limited in their cycling life and fast charge characteristics. Here a facile approach is demonstrated to synthesize hierarchically porous hollow carbon spheres that host Se (Se@HHCS) and allow for state-of-the-art electrochemical performance in a standard carbonate electrolyte (1 M LiPF 6 in 1:1 EC:DEC). The Se@HHCS electrodes display among the most favorable fast charge and cycling behavior reported. For example, they deliver specific capacities of 442 and 357 mA h g -1 after 1500 and 2000 cycles at 5C and 10C, respectively. At 2C, Se@HHCS delivers 558 mA h g -1 after 500 cycles, with cycling coulombic efficiency of 99.9%. Post-mortem microstructural analysis indicates that the structures remain intact during extended cycling. Per GITT analysis, Se@HHCS possesses significantly higher diffusion coefficients in both lithiation and delithiation processes as compared to the baseline. Furthermore, the superior performance of Se@HHCS is directly linked to its macroscopic and nanoscale pore structure: the hollow carbon sphere morphology as well as the remnant open nanoporosity accommodates the 69% volume expansion of the Li to Li 2 Se transformation, with the nanopores also providing a complementary fast ion diffusion path.

25 ENERGY STORAGE↗

Langevin Dynamics of Heavy Quarks in 5D Holographic QCD models

I discuss the holographic approach to the Langevin equation describing the motion of a heavy quark propagating through the deconfined Quark-Gluon Plasma (QGP). The Langevin diffusion coefficients are directly related to the jet quenching parameter, which enters in the reconstruction of RHIC events involving heavy probes. After a brief review of the Langevin equation, I discuss the calculation of the Langevin coefficients in 5-dimensional holographic duals. Finally, I discuss the results for the jet quenching parameter in a phenomenological holographic QCD model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geometrical effects on the electron residence time in semiconductor nano-particles

We have used random walk (RW) numerical simulations to investigate the influence of the geometry on the statistics of the electron residence time τ{sub r} in a trap-limited diffusion process through semiconductor nano-particles. This is an important parameter in coarse-grained modeling of charge carrier transport in nano-structured semiconductor films. The traps have been distributed randomly on the surface (r{sup 2} model) or through the whole particle (r{sup 3} model) with a specified density. The trap energies have been taken from an exponential distribution and the traps release time is assumed to be a stochastic variable. We have carried out (RW) simulations to study the effect of coordination number, the spatial arrangement of the neighbors and the size of nano-particles on the statistics of τ{sub r}. It has been observed that by increasing the coordination number n, the average value of electron residence time, τ{sup ¯}{sub r} rapidly decreases to an asymptotic value. For a fixed coordination number n, the electron's mean residence time does not depend on the neighbors' spatial arrangement. In other words, τ{sup ¯}{sub r} is a porosity-dependence, local parameter which generally varies remarkably from site to site, unless we are dealing with highly ordered structures. We have also examined the effect of nano-particle size d on the statistical behavior of τ{sup ¯}{sub r}. Our simulations indicate that for volume distribution of traps, τ{sup ¯}{sub r} scales as d{sup 2}. For a surface distribution of traps τ{sup ¯}{sub r} increases almost linearly with d. This leads to the prediction of a linear dependence of the diffusion coefficient D on the particle size d in ordered structures or random structures above the critical concentration which is in accordance with experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of water with epoxy.

The chemistries of reactants, plasticizers, solvents and additives in an epoxy paint are discussed. Polyamide additives may play an important role in the absorption of molecular iodine by epoxy paints. It is recommended that the unsaturation of the polyamide additive in the epoxy cure be determined. Experimental studies of water absorption by epoxy resins are discussed. These studies show that absorption can disrupt hydrogen bonds among segments of the polymers and cause swelling of the polymer. The water absorption increases the diffusion coefficient of water within the polymer. Permanent damage to the polymer can result if water causes hydrolysis of ether linkages. Water desorption studies are recommended to ascertain how water absorption affects epoxy paint.

08 HYDROGEN↗

Energetic oxygen and sulfur ions in the Jovian magnetosphere

Observations of 1 to 20 MeV/nuc oxygen, sodium, and sulfur ions in the Jovian magnetosphere are reported. Measurements made by the cosmic ray subsystem on Voyager 1 and 2 were used to calculate abundances and energy spectra in the region from 5 to 20 Jovian radii. The phase space density of the oxygen ions calculated from the spectra has a positive radial gradient between 6 and 17 Jovian radii, indicating an inward diffusive flow. The diffusion coefficient upper limit at 9 Jovian radii is approximately 10 to the -5 power/s. This limit, combined with the analysis of Voyager plasma observations by Siscoe et al.1981, implies an upper limit to the mass loading rate near Io of approximately 10 to the 28th power ions/s. The energetic oxygen lifetime is within an order of magnitude of the strong pitch-angle diffusion lifetime in this region, with the largest total number of particles lost between 7.5 and 12.5 Jovian radii. It is shown that the losses are not due to geometric absorption by Io, absorption by dust grains, or energy loss in the plasma of the inner magnetosphere, and it is therefore postulated that the primary loss mechanism is pitch-angle scattering into the loss cone.

Gehrels, N.↗

The Aladdin experiment. I - Dynamics.

A coordinated rocket experiment was carried out on Nov. 20, 1970 at Eglin AFB, Fla. (30 deg N) to determine atmospheric layering and density distributions of ions and neutrals. The program measured vertical profiles between 70 and 150 km altitude of total neutrals, ions and electrons, individual species, temperature, density, diffusion coefficients, horizontal winds, and turbulent structure. A dynamic computer code model using these parameters was compared with the observed profiles. Wind fields were measured from seven chemical trails, separated up to 60 km horizontally and 600 sec in time. Kinetic temperatures were measured from fluorescence of chemically-released AlO, ranging from 440 to 680 K between 126 and 161 km. Densities derived from diffusion of the AlO ranged from 10 to 5 times 10 to the -12th power per cu cm between 126 and 139 km. A rocket-borne pitot probe showed wavelike density deviations from current standard atmosphere models, amounting to -25% at 80 and 110 km and to +25% at 100 and 125 km. The derived temperature profile from the pitot probe showed a double minimum at 74 and 102 km.

Rosenberg, N. W.↗

The relative diffusion of strong magnetic fields and tenuous gases

General equations are given for treating the diffusion of a magnetic field in a fluid with electrical conductivity and a resistive diffusion coefficient. Consequences of nonnegligible gas motion are investigated by considering the one-dimensional problem where a tenuous isothermal gas with pressure expressed as a function of x-coordinate and time is enmeshed in a magnetic field in the y-direction. Approximate equations are obtained for the case of weak fluctuations in gas or field pressure, and the properties of a nonlinear diffusion equation are illustrated with the example of an initial thin slab of gas confined by a uniform field on either side. The advance of a gas front into a nonvanishing gas density is illustrated by using the progressive wave solution. Application of the results to the evolution of streamers and filaments observed in the solar corona is briefly discussed

Parker, E. N.↗

A Study to Analyze the Permeation of High Density Gases and Propellant Vapors Through Single Layer Teflon or Teflon Structure Materials and Laminations

This report contains the results of a fifteen month analytical and experimental study of the leakage rate of the pressurant gases (N2, He) and the propellant vapors (N2O4,N2H4) through bladder structures consisting of two layers of Teflon separated by a metallic foil diffusion barrier containing microscopic or larger holes. Results were obtained for the steady state leakage rate through circular holes and long rectangular openings in the barrier for arbitrary thicknesses of the two Teflon layers. The effect of hole shape and relative hole position on the leakage rate were studied. The transient problem was analyzed and it was shown that steady state calculations are adequate for estimating the leakage rate. A computer program entitled "Diffusion Analyzer Program" was developed to calculate the leakage rate, both transient and steady state. Finally, the analytical results were compared to experimentally determined values of the leakage rate through a model laminated bladder structure. The results of the analysis are in good agreement with experiment. The experimental effort (Part II of the Bladder Permeation Program) measured the solubility, diffusion coefficient and permeability of helium, nitrogen and nitrogen tetroxide vapor through Teflon TFE and FEP membranes. Data were obtained in the temperature range of 25 to 100 C at pressures ranging from near vacuum to about 20 atmospheres. Results of the experimental effort were compared with the limited data previously reported. As a verification to the applicability of results to actual bladder systems, counter diffusion tests were performed with a laminated sample containing aluminum foil with a selected group of holes.

Johnson, R. L.↗

Atomic force microscopy study of the growth mechanisms of nanostructured sputtered Au film on Si(111): Evolution with film thickness and annealing time

Nanostructured Au films were deposited on Si(111) by room-temperature sputtering. By the atomic force microscopy technique we studied the evolution of the Au film morphology as a function of the film thickness h and annealing time t at 873 K. By the study of the evolution of the mean vertical and horizontal sizes of the islands forming the film and of their fraction of covered area as a function of h from 1.7x10{sup 17} to 1.0x10{sup 18} Au/cm{sup 2} we identified four different growth stages such as: (1) 1.7x10{sup 17{<=}}h{<=}3.0x10{sup 17} Au/cm{sup 2}, nucleation of nanometric three-dimensional (3D) hemispherical Au clusters; (2) 3.0x10{sup 17}<h{<=}5.2x10{sup 17} Au/cm{sup 2}, lateral growth of the Au clusters; (3) 5.2x10{sup 17}<h{<=}7.7x10{sup 17} Au/cm{sup 2}, coalescence of the Au clusters; (4) 7.7x10{sup 17}<h{<=}1.0x10{sup 18} Au/cm{sup 2}, vertical growth of the coalesced Au clusters. The application of the dynamic scaling theory of growing interfaces allowed us to calculate the dynamic scaling exponent z=3.8{+-}0.3, the dynamic growth exponent {beta}=0.38{+-}0.03, the roughness exponent {alpha}=1.4{+-}0.1 and the Avrami exponent m=0.79{+-}0.02. Finally, the study of the evolution of the mean Au clusters size as a function of annealing time at 873 K allowed us to identify the thermal-induced self-organization mechanism in a surface diffusion limited ripening of 3D structures and also the surface diffusion coefficient of Au on Si(111) at 873 K was estimated in (8.2x10{sup -16}){+-}(3x10{sup -17}) m{sup 2}/s.

36 MATERIALS SCIENCE↗

MAGNETIC FIELD LINE RANDOM WALK FOR DISTURBED FLUX SURFACES: TRAPPING EFFECTS AND MULTIPLE ROUTES TO BOHM DIFFUSION

The magnetic field line random walk (FLRW) is important for the transport of energetic particles in many astrophysical situations. While all authors agree on the quasilinear diffusion of field lines for fluctuations that mainly vary parallel to a large-scale field, for the opposite case of fluctuations that mainly vary in the perpendicular directions, there has been an apparent conflict between concepts of Bohm diffusion and percolation/trapping effects. Here computer simulation and non-perturbative analytic techniques are used to re-examine the FLRW in magnetic turbulence with slab and two-dimensional (2D) components, in which 2D flux surfaces are disturbed by the slab fluctuations. Previous non-perturbative theories for D{sub perpendicular}, based on Corrsin's hypothesis, have identified a slab contribution with quasilinear behavior and a 2D contribution due to Bohm diffusion with diffusive decorrelation (DD), combined in a quadratic formula. Here we present analytic theories for other routes to Bohm diffusion, with random ballistic decorrelation (RBD) either due to the 2D component itself (for a weak slab contribution) or the total fluctuation field (for a strong slab contribution), combined in a direct sum with the slab contribution. Computer simulations confirm the applicability of RBD routes for weak or strong slab contributions, while the DD route applies for a moderate slab contribution. For a very low slab contribution, interesting trapping effects are found, including a depressed diffusion coefficient and subdiffusive behavior. Thus quasilinear, Bohm, and trapping behaviors are all found in the same system, together with an overall viewpoint to explain these behaviors.

79 ASTRONOMY AND ASTROPHYSICS↗

Where Lower Calcite Abundance Creates More Alteration: Enhanced Rock Matrix Diffusivity Induced by Preferential Dissolution [Where Lower Calcite Abundance Creates More Alteration: Enhanced Rock Matrix Diffusivity Induced by Preferential Carbonate Dissolution]

Fractured rocks are essential for flow, solute transport and energy production in geosystems. Existing studies on mineral reactions in fractured rocks mostly consider single mineral systems where reactions occur at the fracture wall without changing rock matrix properties. This work presents multicomponent reactive transport numerical experiments in a fractured rock from the Brady’s field, a geothermal reservoir at a depth of 1,396 m in the Hot Springs Mountains, Nevada. Initial porosity, permeability, mineral composition (quartz, clay, and calcite), and fracture geometry are based on microscopy characterization and X-ray tomography. The model was calibrated using a CO 2 -saturated water flooding experiment. Three numerical experiments were carried out with the same initial physical properties however different calcite content. Although total dissolved masses are similar among the three cases, abundant calcite (50% (v/v), calcite50) leads to a localized, thick zone of large porosity increase while low calcite content (10% (v/v), calcite10) creates an extended and narrow zone of small porosity increase resulting in surprisingly larger change in effective transport property. After 300 days of dissolution, effective matrix diffusion coefficients increase by 9.9 and 19.6 times in calcite50 and calcite10, respectively, inducing corresponding 2.1 and 3.2 times rise in the slopes of power law tailing, a measure of transport properties. This counterintuitive results suggest that lower abundance of reactive minerals leads to greater alteration in the fractured media. Detailed analysis show that the effective rates of the fast-dissolving calcite are limited by diffusive transport in the altered matrix and the shape of the altered zone. In contrast, the while effective dissolution of slow-dissolving quartz depends on effective diffusion within the entire rock matrix. Calcite dissolution only occurs at the thin altered–unaltered matrix interface of tens of micrometers thickness occupying less than 1% of the total calcite content. In contrast, all quartz are effectively dissolving. Furthermore, this work highlights the importance of mineralogical complexity in determining mineral dissolution and rock matrix property evolution.

58 GEOSCIENCES↗

Modeling of Diffusivity for 2D Vacancy Nanopits and Comparison with 2D Adatom Nanoislands on Metal(100) Surfaces Including Analysis for Ag(100)

Diffusion coefficients, D N , for 2D vacancy nanopits are compared with those for 2D homoepitaxial adatom nanoislands on metal(100) surfaces, focusing on the variation of DN with size, N. Here, N is measured in missing atoms for pits and adatoms for islands. Analysis of D N is based on kinetic Monte Carlo simulations of a tailored stochastic lattice-gas model, where pit and island diffusion are mediated by periphery diffusion, i.e., by edge atom hopping. Precise determination of D N versus N for typical parameters reveals a cyclical variation with an overall decrease in magnitude for increasing moderate O(10 2 ) ≤ N ≤ O(10 3 ). Monotonic decay, D N ~ N -β , is found for N ≥ O(10 2 ) with effective exponents, β = β eff , for both pits and islands, both well below the macroscopic value of βmacro = 3/2. D N values for vacancy pits are significantly lower (higher) than for adatom islands for moderate N in the case of low (high) kink rounding barrier. However, D N values for pits and islands slowly merge, and β eff → 3/2 for sufficiently large N. The latter feature is expected from continuum Langevin formulations appropriate for large sizes. Finally, we compare predictions from our model incorporating appropriate energetic parameters for Ag(100) with different sets of experimental data for diffusivity at 300 K, including assessment of β eff , for experimentally observed sizes N from ~100 to ~1000.

36 MATERIALS SCIENCE↗