Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Directing Charge Carriers and Ferroelectric Domains at Lateral Interfaces in van der Waals Heterostructures

Emergent phenomena in traditional ferroelectrics are frequently observed at heterointerfaces. Accessing such functionalities in van der Waals ferroelectrics requires the formation of layered heterostructures, either vertically stacked (similar to oxide ferroelectrics) or laterally stitched (without equivalent in 3D-crystals). Here, we investigate lateral heterostructures of the ferroelectric van der Waals semiconductors SnSe and SnS. A two-step process produces ultrathin crystals comprising an SnSe core laterally joined to an SnS edge-band, as confirmed by Raman spectroscopy, transmission electron microscopy (TEM) imaging, and electron diffraction. TEM shows a moiré pattern across the SnSe core due to coverage by an ultrathin SnS layer. The ability of the lateral interface (IF) to direct excited carriers, probed by cathodoluminescence, shows electron transfer over 560 nm diffusion length from the SnS edge-band. Large, thin flakes supporting ferroelectricity allow investigating domains and domain wall interactions in uniform crystals and lateral heterostructures. Polarized optical microscopy of sub-20 nm flakes consistently shows ⟨110⟩ oriented stripe domains with mirror-twin domain walls. Heterostructures adopt two domain configurations, with domains either constrained to the SnSe core or propagating across the entire SnSe–SnS flakes. Furthermore, the combined results demonstrate multifunctional van der Waals heterostructures with high-quality IFs presenting extraordinary opportunities for manipulating carrier flows and ferroelectric domain patterns.

2D ferroelectrics↗

Positron Annihilation Studies In Polymer Nano-Composites

Positron annihilation spectroscopy coupled with a variable mono-energy positron beam has been applied to study nanoscale polymeric nanocomposites. New information about multilayer depth profiles and structures, interfacial free-volume and open space properties have been obtained in polystyrene/carbon nano fiber composites. The S parameter in Doppler Broadening Energy Spectra combined slow positron beam is used to quantitatively represent the free volume, open spaces, and interactions in the interface between polystyrene matrix and carbon nanofibers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The interfacial amorphous double layer and the homogeneous nucleation in reflow of a Sn-Zn solder on Cu substrate

To illustrate the interfacial reaction mechanism, the Sn-Zn[Sn-8.5Zn-0.5Ag-0.01Al-0.1Ga (wt%)] solder was reflowed on Cu substrate at 250 deg. C for 15 s followed by immediate quench in liquid nitrogen. The frozen interfacial microstructure was investigated with high resolution transmission electron microscope. An amorphous double layer was formed at the interface which consists of a 5 nm pure Cu region and a Cu-Zn diffusion region. Nanocrystalline intermetallic compound (IMC) Cu{sub 5}Zn{sub 8} were observed in the Cu-Zn diffusion region. These nanocrystalline IMCs are suggested to form via a homogeneous nucleation process.

36 MATERIALS SCIENCE↗

Demonstrating 1 nm-oxide-equivalent-thickness HfO{sub 2}/InSb structure with unpinning Fermi level and low gate leakage current density

In this work, the band alignment, interface, and electrical characteristics of HfO{sub 2}/InSb metal-oxide-semiconductor structure have been investigated. By using x-ray photoelectron spectroscopy analysis, the conduction band offset of 1.78 ± 0.1 eV and valence band offset of 3.35 ± 0.1 eV have been extracted. The transmission electron microscopy analysis has shown that HfO{sub 2} layer would be a good diffusion barrier for InSb. As a result, 1 nm equivalent-oxide-thickness in the 4 nm HfO{sub 2}/InSb structure has been demonstrated with unpinning Fermi level and low leakage current of 10{sup −4} A/cm{sup −2}. The D{sub it} value of smaller than 10{sup 12} eV{sup −1}cm{sup −2} has been obtained using conduction method.

36 MATERIALS SCIENCE↗

Insulating-layer formation of metallic LaNiO{sub 3} on Nb-doped SrTiO{sub 3} substrate

We investigated the electronic structures of strongly correlated metallic LaNiO{sub 3} (LNO) and semiconducting Nb-doped SrTiO{sub 3} (Nb:STO) heterostructures by varying the LNO film thickness using in situ photoemission spectroscopy. We found that, contrary to other interfaces with SrTiO{sub 3} and LaAlO{sub 3}, insulating LNO layers are formed between metallic LNO layers and Nb:STO. Such behavior seems to be related with an electron transfer from Nb:STO to LNO due to Schottky-barrier formation at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal-nanotube composites as radiation resistant materials

The improvement of radiation resistance in nanocomposite materials is investigated by means of classical reactive molecular dynamics simulations. In particular, we study the influence of carbon nanotubes (CNTs) in an Ni matrix on the trapping and possible outgassing of He. When CNTs are defect-free, He atoms diffuse alongside CNT walls and, although there is He accumulation at the metal-CNT interface, no He trespassing of the CNT wall is observed, which is consistent with the lack of permeability of a perfect graphene sheet. However, when vacancies are introduced to mimic radiation-induced defects, He atoms penetrate CNTs, which play the role of nano-chimneys, allowing He atoms to escape the damaged zone and reduce bubble formation in the matrix. Consequently, composites made of CNTs inside metals are likely to display improved radiation resistance, particularly when radiation damage is related to swelling and He-induced embrittlement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rate constants in spatially inhomogeneous systems

Here, we introduce a theory and accompanying importance sampling method for computing rate constants in spatially inhomogeneous systems. Using the relationship between rate constants and path space partition functions, we illustrate that the relative change in the rate of a rare event through space is isomorphic to the calculation of a free energy difference, albeit in a trajectory ensemble. Like equilibrium free energies, relative rate constants can be estimated by importance sampling. An extension to transition path sampling is proposed that combines biased path ensembles and weighted histogram analysis to accomplish this estimate. We demonstrate that rate constants can also be decomposed into different contributions, including relative changes in stability, barrier height, and flux. This decomposition provides a means of interpretation and insight into rare processes in complex environments. We confirm these ideas with a simple model of diffusion with spatially varying diffusivity and illustrate their utility in a model of ion pair dissociation near an electrochemical interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-Equilibrium Doping of Poly-Si:Ga/SiOx Passivating Contacts Solar Cells

In this contribution, we show that Ga-hyperdoped poly-Si/SiOx contacts are realized by pulsed laser annealing and post-hydrogenation. The motivation behind this work is to improve the inferior performance of boron-doped poly- Si/SiOx contacts when compared to the phosphorus-doped contacts. Here we used Ga as a novel p-type dopant to replace B, as B is known to accumulate at the interface between the oxide and the crystalline silicon and cause recombination. Due to a high diffusivity of Ga in oxide and a much higher segregation coefficient (Si:SiOx), Ga is shown to be immune to the oxide pileup phenomenon. However, Ga has a low solid solubility limit in Si (5x10^19 cm-3), which is not enough to form a low resistivity contact. To overcome this problem, we explored pulsed laser annealing via excimer laser by varying the laser energy densities and pulses. The passivation and electrical properties are studied systematically using photoluminescence (PL), secondary ion mass spectrometry (SIMS), and Van der Pauw-Hall measurements. We show an active Ga doping concentration above 1x10^20 cm^-3, which is above the solid solubility limit of Ga in Si. Good passivation quality is demonstrated with the highest implied Voc (iVoc) of 721 mV on single side polished samples. Furthermore, a low diode contact resistivity of ~22 m..omega.. cm^2 is obtained using Ti/Ag contacts, with minimal metal-to-semiconductor contact resistivity of 0.9 m..omega.. cm^2.

non-equilibrium doping↗

Microscopic approach to the kinetics of pattern formation of charged molecules on surfaces

A microscopic formalism based on computing many-particle densities is applied to the analysis of the diffusion-controlled kinetics of pattern formation in oppositely charged molecules on surfaces or adsorbed at interfaces with competing long-range Coulomb and short-range Lennard-Jones interactions. Particular attention is paid to the proper molecular treatment of energetic interactions driving pattern formation in inhomogeneous systems. The reverse Monte Carlo method is used to visualize the spatial molecular distribution based on the calculated radial distribution functions (joint correlation functions). We show the formation of charge domains for certain combinations of temperature and dynamical interaction parameters. The charge segregation evolves into quasicrystalline clusters of charges, due to the competing long- and short-range interactions. The clusters initially co-exist with a gas phase of charges that eventually add to the clusters, generating ”fingers” or line of charges of the same sign, very different than the nanopatterns expected by molecular dynamics in systems with competing interactions in two dimensions, such as strain or dipolar versus van der Waals interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular Dynamics Modeling of Heat Transport in Metals and Semiconductors

Interfacial thermal transport is of great importance in a number of practical applications where interfacial resistance between layers is frequently a major bottleneck to effective heat dissipation. For example, efficient heat transfer at silicon/aluminum and silicon/copper interfaces is very critical in power electronics packages used in hybrid electric vehicle applications. It is therefore important to understand the factors that govern and impact thermal transport at semiconductor/metal interfaces. Hence, in this study, we use classical molecular dynamics modeling to understand and study thermal transport in silicon and aluminum, and some preliminary modeling to study thermal transport at the interface between silicon and aluminum. A good match is shown between our modeling results for thermal conductivity in silicon and aluminum and the experimental data. The modeling results from this study also match well with relevant numerical studies in the literature for thermal conductivity. In addition, preliminary modeling results indicate that the interfacial thermal conductance for a perfect silicon/aluminum interface is of the same order as experimental data in the literature as well as diffuse mismatch model results accounting for realistic phonon dispersion curves.

36 MATERIALS SCIENCE↗

Corrosion of oxygen-doped tantalum by lithium

The increase in the penetration of tantalum by liquid lithium with increasing oxygen content of tantalum results from the ability of lithium to extract oxygen from tantalum oxides and/or from regions of high oxygen concentrations, accompanied by the creation of minute channels. At low oxygen concentration, oxides are present primarily at the grain boundaries and the lithium penetration is primarily intergranular. At high oxygen concentration, oxides and/or regions of high oxygen concentration are present both at the grain boundaries and within the grains; lithium penetration is both intergranular and transgranular. For a specific oxygen concentration, the severity of corrosion decreases with increasing temperature because (1) the oxygen solubility increases with temperature, decreasing the number of oxide particles and/or regions of high oxygen concentration, and (2) the diffusivity of oxygen in tantalum increases, allowing more rapid oxygen removal at the tantalum lithium interface.

Stecura, S.↗

Film-cooling effectiveness with developing coolant flow through straight and curved tubular passages

The data were obtained with an apparatus designed to determine the influence of tubular coolant passage curvature on film-cooling performance while simulating the developing flow entrance conditions more representative of cooled turbine blade. Data comparisons were made between straight and curved single tubular passages embedded in the wall and discharging at 30 deg angle in line with the tunnel flow. The results showed an influence of curvature on film-cooling effectiveness that was inversely proportional to the blowing rate. At the lowest blowing rate of 0.18, curvature increased the effectiveness of film cooling by 35 percent; but at a blowing rate of 0.76, the improvement was only 10 percent. In addition, the increase in film-cooling area coverage ranged from 100 percent down to 25 percent over the same blowing rates. A data trend reversal at a blowing rate of 1.5 showed the straight tubular passage's film-cooling effectiveness to be 20 percent greater than that of the curved passage with about 80 percent more area coverage. An analysis of turbulence intensity detain the mixing layer in terms of the position of the mixing interface relative to the wall supported the concept that passage curvature tends to reduce the diffusion of the coolant jet into the main stream at blowing rates below about. Explanations for the film-cooling performance of both test sections were made in terms differences in turbulences structure and in secondary flow patterns within the coolant jets as influenced by flow passage geometry.

Papell, S. S.↗

Joint US/Russia TU-144 Engine Ground Tests

Two engine research experiments were recently completed in Moscow, Russia using an engine from the Tu-144 supersonic transport airplane. This was a joint project between the United States and Russia. Personnel from the NASA Lewis Research Center, General Electric Aircraft Engines, Pratt & Whitney, the Tupolev Design Bureau, and EBP Aircraft LTD worked together as a team to overcome the many technical and cultural challenges. The objective was to obtain large scale inlet data that could be used in the development of a supersonic inlet system for a future High Speed Civil Transport (HSCT). The-first experiment studied the impact of typical inlet structures that have trailing edges in close proximity to the inlet/engine interface plane on the flow characteristics at that plane. The inlet structure simulated the subsonic diffuser of a supersonic inlet using a bifurcated splitter design. The centerbody maximum diameter was designed to permit choking and slightly supercritical operation. The second experiment measured the reflective characteristics of the engine face to incoming perturbations of pressure amplitude. The basic test rig from the first experiment was used with a longer spacer equipped with fast actuated doors. All the objectives set forth at the beginning of the project were met.

Acosta, Waldo A.↗

Spontaneous polarization driven Mg concentration profile reconstruction in MgZnO/ZnO heterostructures

Atomic reconstruction at the interface of MgZnO and ZnO in molecular beam epitaxy grown heterostructures is investigated. Using secondary ion mass spectroscopy, we experimentally find that Mg atomic reconstruction depends on the polarity of the interface; it is not observed in n-type interfaces (MgZnO on Zn-polar ZnO) owing to electron accumulation, while in p-type interfaces (ZnO on Zn-polar MgZnO), Mg drastically redistributes into the ZnO layer. Combined with self-consistent calculation of band profiles and carrier distributions, we reveal that the observed Mg reconstruction is not due to thermal diffusion but consequences in order to avoid hole accumulation. This tendency implies inherent significant asymmetry of energy scales of atomic and electronic reconstructions between n-type and p-type interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural Characteristics, Mechanical Properties, and Corrosion Behavior of Field-Assisted Diffusion Welded Alloy 617

This study investigated the microstructural characteristics, mechanical response, and corrosion resistance of Alloy 617 diffusion welded by electric field-assisted sintering (EFAS). The microstructure exhibited good grain boundary (GB) migration across the interface and flat interface in the samples bonded at different conditions. Graded grain size was observed, with grain coarsening being more significant near sample surface due to EFAS-induced temperature gradient. Tensile testing revealed that the specimens fractured in the matrix away from the interface. The peak strength of 807 MPa was obtained in the samples welded at 1000°C. The materials obtained at 1100°C exhibited reduced tensile strength but improved ductility. Strain maps revealed by digital image correlation showed the flat interfaces were less ductile compared to the matrix. The hardness reduced near sample surfaces due to enlarged grains induced by temperature gradient. The interfaces with GB migration exhibited improved corrosion resistance in molten salt compared to the flat interfaces.

36 - MATERIALS SCIENCE↗

Identifying Suitable Front Contacts for High‐Efficiency Cd(Se,Te) Solar Cells on Space‐Qualified Cover Glass

Deployment of photovoltaics in space requires devices that combine high-efficiency, low areal mass, and resilience to harsh environments. Historically, high-efficiency multijunction III–V materials have dominated space power systems; however, their high cost and limited manufacturing throughput motivate the exploration of scalable alternatives. While CdTe-based thin-film photovoltaics offer an attractive option, their performance on non-conventional substrates can suffer from front contact instability under higher-temperature processing. Here, the role of front contact chemistry in limiting cell performance is investigated using CdTe-based devices fabricated on 150 μm thick Ceria-doped space-qualified 0214 Corning glass. A matrix of four transparent conducting oxides (TCOs: CTO, AZO, ITO, IZO) combined with two n-type emitters (MZO, IGO) reveals chemical stability at the front interface—rather than absorber composition alone—governs recombination losses, voltage deficits, and device reproducibility. Chemically stable front contact combinations suppress elemental diffusion and interfacial degradation, resulting in significantly improved carrier lifetimes and junction quality. These insights are validated through record-certified Cd(Se,Te) cell efficiencies of 18.4% under AM1.5G and 16.2% under AM0 illumination on ultra-thin glass. Beyond CdTe, this work provides a general framework for the rational selection of TCO/emitter interfaces in superstrate thin-film photovoltaics, including emerging technologies like metal halide perovskites, while enabling high-efficiency, lightweight photovoltaics for space applications.

14 SOLAR ENERGY↗

SA508 low alloy steel to 316L stainless steel dissimilar metal joint made by powder metallurgy hot isostatic pressing

Joining ferritic SA508 low alloy steel (LAS) and austenitic 316 L stainless steel (SS) via powder metallurgy hot isostatic pressing (PM-HIP) was evaluated as an alternative method to welding. This study investigated the mechanical and microstructural evolutions of the bimetallic interface under different joint designs and heat treatments. Here, the direct joining of dissimilar metal alloys by PM-HIP method resulted in two designs: 1) powder SA508 to solid bar 316 L (P508–B316L) and 2) powder 316 L solid bar SA508 (P316L-B508). In both cases, P508–B316L and P316L-demonstrated satisfactory tensile strength, however, high hardness and severe depreciation in toughness were located on the bimetallic interface. The mechanisms responsible for the detrimental mechanical properties were verified. Large oxides were observed in P508–B316L due to the prior powder boundary (PPB) oxides present in SA508 powder. The intense sensitization occurred from the formation of M 23 C 6 carbides, consequently from the slow cooling after PM-HIP in P316L-B508. Post-HIP heat treatments were explored to reduce the distance of carbide formation; however, the heat treatment could not eliminate the carbides. The experimental results were compared to the diffusion couple simulation as a function of carbide formation with distance. The analysis also showed the high hardness at the bimetallic interface was primarily contributed by solid solution strengthening. In conclusion, the direct joining of P316L-B508 and P508–B316L via PM-HIP was deemed to be unfeasible, and a transitional material is necessary to impede the diffusion of carbon.

316L stainless Steel↗

Effect of top gate potential on bias-stress for dual gate amorphous indium-gallium-zinc-oxide thin film transistor

We report the abnormal behavior of the threshold voltage (V{sub TH}) shift under positive bias Temperature stress (PBTS) and negative bias temperature stress (NBTS) at top/bottom gate in dual gate amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors (TFTs). It is found that the PBTS at top gate shows negative transfer shift and NBTS shows positive transfer shift for both top and bottom gate sweep. The shift of bottom/top gate sweep is dominated by top gate bias (V{sub TG}), while bottom gate bias (V{sub BG}) is less effect than V{sub TG}. The X-ray photoelectron spectroscopy (XPS) depth profile provides the evidence of In metal diffusion to the top SiO{sub 2}/a-IGZO and also the existence of large amount of In{sup +} under positive top gate bias around top interfaces, thus negative transfer shift is observed. On the other hand, the formation of OH{sup −} at top interfaces under the stress of negative top gate bias shows negative transfer shift. The domination of V{sub TG} both on bottom/top gate sweep after PBTS/NBTS is obviously occurred due to thin active layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗