Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Low Impedance Cathode/Electrolyte Interfaces for High Energy Density Solid-State Batteries

All-solid-state batteries (ASSBs) using a ceramic fast Li-ion conductor as a solid-state electrolyte (SSE) have been proposed as a promising strategy to significantly increase the energy density of lithium batteries. Due to their high ion conductivity and excellent stability, Li-stuffed garnets exhibit the most promising physical and chemical properties for SSEs. However, the typical microstructure, thick (>100 μm) bulk electrolyte and simple planar electrode/electrolyte interfaces, combined with poor electrode wetting of the garnet result in excessively high area specific resistances (ASRs) that severely limit achievable current density and cell energy density. In this project, the team is building on their demonstrated expertise with garnet electrolytes and ASSBs to accomplish the following: (1) engineer interfaces to overcome high NMC/LLZ interfacial impedance and interfacial degradation; (2) develop processing and fabrication techniques to achieve high loading NMC/LLZ composite cathodes with low resistance and high cyclability; and (3) integrate the NMC/LLZ cathodes into all-solid-state Li-metal/LLZ cells to achieve high-energy-density batteries.

25 ENERGY STORAGE↗

Research rocket test RR-1 (Black Brant VC) and RR-2 (Aerobee 170A): Investigations of the stability of bubbles in plain and fiber-reinforced metal and solidified in a near-zero-g environment

The results of the first two of a series of research rocket flights are presented. The objectives of these flights were (1) to learn about the capabilities of these rockets, (2) to learn how to interface the payloads and rockets, and (3) to process some of the composite casting demonstration capsules intended originally for Apollo 15. The capsules contained experiments for investigating the stability of gas bubbles in plain and fiber-reinforced metal melted and solidified in a near-zero-g (0.0119g) environment. The characteristics of the two research rockets, an Aerobee 170A and a Black Brant VC, used to obtain the periods of near-zero-g and the temperature control unit used for processing the contents of the two experiment capsules are discussed.

Yates, I. C.↗

Impact of MgO thickness on the perpendicular magnetic anisotropy of Mo/Co2FeAl/MgO/Mo multilayers with improved annealing stability

Highlights: • Robust PMA is demonstrated for thermally stable Mo/Co{sub 2}FeAl(CFA)/MgO/Mo multilayer. • Thickness of CFA and MgO over-layer plays a main role in achieving the strong PMA. • Significant PMA energy of K{sub eff} ≈ 1.67 × 10{sup 6} erg/cm{sup 3} is achieved for film annealed at 400 °C. • Co and/or Fe – 3d{sub Z}{sup 2} and O-2P{sub Z} orbital hybridization at interface is the origin for PMA. - Abstract: In this study, an interfacial perpendicular magnetic anisotropy (PMA) is achieved in Mo/Co{sub 2}FeAl (CFA)/MgO/Mo multilayer with good thermal stability up to 400 °C by tuning the annealing temperature and film thickness of CFA and MgO. For an optimized CFA film thickness (1.0 nm) and annealing temperature (400 °C), the CFA/MgO interface plays a main role in achieving the strong PMA property when the MgO film thickness was tuned from 0.5 nm to 2.0 nm. The effective perpendicular magnetic anisotropy energy density (K{sub eff}) is approximately 1.67 × 10{sup 6} erg/cc when t{sub MgO} = 2 nm. Surface morphology and surface roughness changes in the films are investigated by atomic force microscopy (AFM). An enhancement in surface smoothness is observed for the annealed films. X-ray photoelectron spectroscopy (XPS) reveals that the strong PMA in Mo/CFA/MgO is originated from the adequate oxidation of Co and Fe at CFA/MgO interface.

36 MATERIALS SCIENCE↗

Laterally configured resistive switching device based on transition-metal nano-gap electrode on Gd oxide

We have developed a fabrication process for a laterally configured resistive switching device based on a Gd oxide. A nano-gap electrode connected by a Gd oxide with the ideal interfaces has been created by adapting the electro-migration method in a metal/GdO{sub x} bilayer system. Bipolar set and reset operations have been clearly observed in the Pt/GdO{sub x} system similarly in the vertical device based on GdO{sub x}. Interestingly, we were able to observe a clear bipolar switching also in a ferromagnetic CoFeB nano-gap electrode with better stability compared to the Pt/GdO{sub x} device. The superior performance of the CoFeB/GdO{sub x} device implies the importance of the spin on the resistive switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of Reagent Emplacement Techniques for Phosphate-based Treatment of the Uranium Contamination Source in the 300 Area White Paper

Persistent uranium contamination of groundwater under the 300 Area of the Hanford Site has been observed. The source of the uranium contamination resides in uranium deposits on sediments at the groundwater interface, and the contamination is mobilized when periodically wetted by fluctuations of Columbia River levels. Treatability work is ongoing to develop and apply phosphate-containing reagents to promote the formation of stable and insoluble uranium phosphate minerals (i.e., autunite) and other phosphate precipitates (di-calcium phosphate, apatite) to stabilize the uranium source. Technologies for applying phosphate-containing reagents by vertical percolation and lateral injection into sediments of the periodically wetted groundwater interface are being investigated. This report is a preliminary evaluation of technologies for lateral injection.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chemical interaction of B{sub 4}C, B, and C with Mo/Si layered structures

To enhance the thermal stability, B{sub 4}C diffusion barrier layers are often added to Mo/Si multilayer structures for extreme ultraviolet optics. Knowledge about the chemical interaction between B{sub 4}C and Mo or Si, however is largely lacking. Therefore, the chemical processes during annealing up to 600 deg. C of a Mo/B{sub 4}C/Si layered structure have been investigated in situ with hard x-ray photoelectron spectroscopy and ex situ with depth profiling x-ray photoelectron spectroscopy. Mo/B/Si and Mo/C/Si structures have also been analyzed as reference systems. The chemical processes in these systems have been identified, with two stages being distinguished. In the first stage, B and C diffuse and react predominantly with Mo. MoSi{sub x} forms in the second stage. If the diffusion barrier consists of C or B{sub 4}C, a compound forms that is stable up to the maximum probed temperature and annealing time. We suggest that the diffusion barrier function of B{sub 4}C interlayers as reported in literature can be caused by the stability of the formed compound, rather than by the stability of B{sub 4}C itself.

36 MATERIALS SCIENCE↗

A Lyapunov Function Based Remedial Action Screening Tool Using Real-Time Data

This report summarizes the outcome of a research project that comprised the development of a Lyapunov function based remedial action screening tool using real-time data (L-RAS). The L-RAS is an advanced computational tool that is intended to assist system operators in making real-time redispatch decisions to preserve power grid stability. The tool relies on screening contingencies using a homotopy method based on Lyapunov functions to avoid, to the extent possible, the use of time domain simulations. This enables transient stability evaluation at real-time speed without the use of massively parallel computational resources. The project combined the following components. 1. Development of a methodology for contingency screening using a homotopy method based on Lyapunov functions and real-time data. 2. Development of a methodology for recommending remedial actions based on the screening results. 3. Development of a visualization and operator interaction interface. 4. Testing of screening tool, validation of control actions, and demonstration of project outcomes on a representative real system simulated on a Real-Time Digital Simulator (RTDS) cluster. The project was led by Michigan State University (MSU), where the theoretical models including homotopy-based screening, trajectory correction using real-time data, and remedial action were developed and implemented in the form of research-grade software. Los Alamos National Laboratory (LANL) contributed to the development of energy margin sensitivity dynamics, which constituted a part of the remedial action portfolio. Florida State University (FSU) and Southern California Edison (SCE) developed a model of the SCE system that was implemented on FSU's RTDS cluster to simulate real-time data that was streamed over the internet to MSU where the L-RAS tool was executed and remedial actions were communicated back to FSU to execute stabilizing controls on the simulated system. LCG Consulting developed the visualization and operator interaction interface, based on specifications provided by MSU. The project was performed from October 2012 to December 2016, at the end of which the L-RAS tool, as described above, was completed and demonstrated. The project resulted in the following innovations and contributions: (a) the L-RAS software prototype, tested on a simulated system, vetted by utility personnel, and potentially ready for wider testing and commercialization; (b) an RTDS-based test bed that can be used for future research in the field; (c) a suite of breakthrough theoretical contributions to the field of power system stability and control; and (d) a new tool for visualization of power system stability margins. While detailed descriptions of the development and implementation of the various project components have been provided in the quarterly reports, this final report provides an overview of the complete project, and is demonstrated using public domain test systems commonly used in the literature. The SCE system, and demonstrations thereon, are not included in this report due to Critical Energy Infrastructure Information (CEII) restrictions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Hot-Casting-Assisted Liquid Additive Engineering for Efficient and Stable Perovskite Solar Cells

High-performance inorganic–organic lead halide perovskite solar cells (PSCs) are often fabricated with a liquid additive such as dimethyl sulfoxide (DMSO), which retards crystallization and reduces roughness and pinholes in the perovskite layers. However, DMSO can be trapped during perovskite film formation and induce voids and undesired reaction byproducts upon later processing steps. Here, it is shown that the amount of residual DMSO can be reduced in as-spin-coated films significantly through use of preheated substrates, or a so-called hot-casting method. Hot casting increases the perovskite film thickness given the same concentration of solutions, which allows for reducing the perovskite solution concentration. By reducing the amount of DMSO in proportion to the concentration of perovskite precursors and using hot casting, it is possible to fabricate perovskite layers with improved perovskite–substrate interfaces by suppressing the formation of byproducts, which increase trap density and accelerate degradation of the perovskite layers. The best-performing PSCs exhibit a power conversion efficiency (PCE) of 23.4% (23.0% stabilized efficiency) under simulated solar illumination. Furthermore, encapsulated devices show considerably reduced post-burn-in decay, retaining 75% and 90% of their initial and post-burn-in efficiencies after 3000 h of operation with maximum power point tracking (MPPT) under high power of ultraviolet (UV)-containing continuous light exposure.

perovskite-substrate interface↗

Light-induced lattice expansion leads to high-efficiency perovskite solar cells

Light-induced structural dynamics plays a vital role in the physical properties, device performance, and stability of hybrid perovskite–based optoelectronic devices. We report that continuous light illumination leads to a uniform lattice expansion in hybrid perovskite thin films, which is critical for obtaining high-efficiency photovoltaic devices. Correlated, in situ structural and device characterizations reveal that light-induced lattice expansion benefits the performances of a mixed-cation pure-halide planar device, boosting the power conversion efficiency from 18.5 to 20.5%. The lattice expansion leads to the relaxation of local lattice strain, which lowers the energetic barriers at the perovskite-contact interfaces, thus improving the open circuit voltage and fill factor. The light-induced lattice expansion did not compromise the stability of these high-efficiency photovoltaic devices under continuous operation at full-spectrum 1-sun (100 milliwatts per square centimeter) illumination for more than 1500 hours.

14 SOLAR ENERGY↗

Dynamics of amphiphilic PEG–PDMS–PEG triblock copolymer assemblies

Here, the size and stability of micelles and vesicles determine the uptake capacity of guest molecules, thereby influencing potential applications in drug/gene delivery, bioreactors, and templates for nanoparticle synthesis. Polyethylene glycol (PEG) and polydimethylsiloxane (PDMS) are commonly used in these applications. We discovered that PEG-PDMS-PEG triblock copolymers can assemble into micelles and vesicles, making them valuable for dynamic studies to derive the bending elasticity, $κ_η$, which governs the stability these objects. We analyzed the structure using cryogenic transmission electron microscopy and small-angle neutron scattering. We investigated the dynamics through dynamic light scattering and neutron spin echo spectroscopy. By varying the number of repeating units in the hydrophilic block, we created micellar (PEG 28 -PDMS 15 -PEG 28 ) and vesicular systems (PEG 14 -PDMS 15 -PEG 14 ). For the vesicle, membrane rigidity was determined from experiments to be $κ_η$ =(16 ± 2) $k_BT$, where $k_BT$ is the thermal energy ($k_B$ Boltzmann’s constant and T is the temperature). According to Zilman and Granek's concept, membrane rigidity reflects height-height fluctuations within the membrane layer. Compared to polymers at the oil-water interface of a microemulsion, the membrane rigidity in polymersomes is over an order of magnitude higher, indicating significantly enhanced stability. This value closely aligns with that of liposomes, suggesting similar stability between polymersomes and liposomes.

Gupta, Sudipta [Louisiana State Univ., Baton Rouge↗

Emergent Ferromagnetism in CaRuO 3 /CaMnO 3 (111)-Oriented Superlattices

The boundary between CaRuO 3 and CaMnO 3 is an ideal test bed for emergent magnetic ground states stabilized through interfacial electron interactions. In this system, nominally antiferromagnetic and paramagnetic materials combine to yield interfacial ferromagnetism in CaMnO 3 due to electron leakage across the interface. In this work, we show that the crystal symmetry at the surface is a critical factor determining the nature of the interfacial interactions. Specifically, by growing CaRuO 3 /CaMnO 3 heterostructures along the (111) instead of the (001) crystallographic axis, we achieve a 3-fold enhancement of the magnetization and involve the CaRuO 3 layers in the ferromagnetism, which now spans both constituent materials. Importantly, the stabilization of a net magnetic moment in CaRuO 3 through strain effects has been long-sought but never consistently achieved, and our observations demonstrate the importance of interface engineering in the development of new functional heterostructures.

36 MATERIALS SCIENCE↗

Building a Fault Tolerant MPI Application: A Ring Communication Example

Process failure is projected to become a normal event for many long running and scalable High Performance Computing (HPC) applications. As such many application developers are investigating Algorithm Based Fault Tolerance (ABFT) techniques to improve the efficiency of application recovery beyond what existing checkpoint/restart techniques alone can provide. Unfortunately for these application developers the libraries that their applications depend upon, like Message Passing Interface (MPI), do not have standardized fault tolerance semantics. This paper introduces the reader to a set of run-through stabilization semantics being developed by the MPI Forum's Fault Tolerance Working Group to support ABFT. Using a well-known ring communication program as the running example, this paper illustrates to application developers new to ABFT some of the issues that arise when designing a fault tolerant application. The ring program allows the paper to focus on the communication-level issues rather than the data preservation mechanisms covered by existing literature. This paper highlights a common set of issues that application developers must address in their design including program control management, duplicate message detection, termination detection, and testing. The discussion provides application developers new to ABFT with an introduction to both new interfaces becoming available, and a range of design issues that they will likely need to address regardless of their research domain.

99 GENERAL AND MISCELLANEOUS↗

Research Progress towards Understanding the Unique Interfaces between Concentrated Electrolytes and Electrodes for Energy Storage Applications

The electrolyte is an indispensable component in all electrochemical energy storage and conversion devices with batteries being a prime example. While most research efforts have been pursued on the materials side, the progress for the electrolyte is slow due to the decomposition of salts and solvents at low potentials, not to mention their complicated interactions with the electrode materials. The general properties of bulk electrolytes such as ionic conductivity, viscosity, and stability all affect the cell performance. However, for a specific electrochemical cell in which the cathode, anode, and electrolyte are optimized, it is the interface between the solid electrode and the liquid electrolyte, generally referred to as the solid electrolyte interphase (SEI), that dictates the rate of ion flow in the system. The commonly used electrolyte is within the range of 1–1.2 m based on the prior optimization experience, leaving the high concentration region insufficiently recognized. Recently, electrolytes with increased concentration (>1.0 m ) have received intensive attention due to quite a few interesting discoveries in cells containing concentrated electrolytes. The formation mechanism and the nature of the SEI layers derived from concentrated electrolytes could be fundamentally distinct from those of the traditional SEI and thus enable unusual functions that cannot be realized using regular electrolytes. In this article, we provide an overview on the recent progress of high concentration electrolytes in different battery chemistries. The experimentally observed phenomena and their underlying fundamental mechanisms are discussed. New insights and perspectives are proposed to inspire more revolutionary solutions to address the interfacial challenges.

25 ENERGY STORAGE↗

Magneto-electric coupling in antiferromagnet/ferroelectric Mn{sub 2}Au/BaTiO{sub 3} interface

Within the crucial issue of the electric field control of magnetism, the use of antiferromagnets (AFMs) coupled to ferroelectrics is much less explored than the ferromagnets counterpart, although the first choice might lead to better performances and larger stability with respect to external perturbations (such as magnetic fields). Here, we explore the possibility to control the magnetic anisotropy of a Mn{sub 2}Au layer by reversing the ferroelectric polarization of BaTiO{sub 3} in Mn{sub 2}Au/BaTiO{sub 3} interfaces. By means of a thorough exploration of many possible geometry configurations, we identify the two most stable, corresponding to compressive and tensile strain at the interface. The first appears to be easy-axis, while the second—easy-plane—with a large induced moment on the interface Ti atom. The reversal of ferroelectric polarization changes the anisotropy by approximately 50%, thus paving the way to the control of AFM properties with an electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells

The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.

Tingare, Yogesh S.↗

Composition‐Conditioning Agent for Doped Spiro‐OMeTAD to Realize Highly Efficient and Stable Perovskite Solar Cells

Abstract The doped Spiro‐OMeTAD hole transport layer (HTL) formed using the lithium bis(trifluoromethane) sulfonimide salt and 4‐tert‐butylpyridine with phenethylammonium iodide surface treatment on a perovskite film has continuously dominated the record power conversion efficiencies (PCEs) of perovskite solar cells (pero‐SCs). However, unstable HTL compositions and iodide salts can cause severe device degradation. In this study, an HTL composition‐conditioning agent (CCA), Spiro‐BD‐2OEG, is designed, which contains a Spiro‐OMeTAD‐like backbone, functional pyridine units, and oligo (ethylene glycol) chains. This finely designed CCA presents good miscibility with Spiro‐OMeTAD and its dopants and acts as a conditioning agent through weak bond interactions. As a result, the CCA‐regulated HTL shows a pinhole‐free and smooth morphology with enhanced Spiro‐OMeTAD ordering and improves dopant stability. In addition, the gradient‐distributed CCA in the HTL can narrow the energy level offset with the valence band of the perovskite. The resultant pero‐SCs exhibit an excellent PCE of 24.19% without any interface treatment and weak size dependence. A remarkable PCE of 22.63% is obtained even for a 1.004‐cm 2 device. Importantly, the strategy shows good universality and significantly promotes the long‐term stability of the pero‐SCs based on the classical doped Spiro‐OMeTAD.

Chemistry↗