Search NASA⌕ Search

SEARCH · Search NASA

Results for “level set methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Search for acoustic signals from ultrahigh energy neutrinos in 1500 km{sup 3} of sea water

An underwater acoustic sensor array spanning {approx}1500 km{sup 3} is used to search for cosmic-ray neutrinos of ultrahigh energies ( E{sub {nu}>}10{sup 18} eV). Approximately 328 million triggers accumulated over an integrated 130 days of data taking are analyzed. The sensitivity of the experiment is determined from a Monte Carlo simulation of the array using recorded noise conditions and expected waveforms. Two events are found to have properties compatible with showers in the energy range 10{sup 24} eV<E{sub sh}<5x10{sup 24} eV and 10{sup 22} eV<E{sub sh}<5x10{sup 22} eV. Since the understanding of impulsive backgrounds is limited, a flux upper limit is set providing the most sensitive limit on ultrahigh energy neutrinos using the acoustic technique.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the origin of nonlinear elasticity in disparate rocks

Dynamic acousto-elastic (DAE) studies are performed on a set of 6 rock samples (four sandstones, one soapstone, and one granite). From these studies, at 20 strain levels 10 -7 < ϵ < 10 -5 , four measures characterizing the nonlinear elastic response of each sample are found. Additionally, each sample is tested with nonlinear resonant ultrasonic spectroscopy (NRUS) and a fth measure of nonlinear elastic response is found. The ve measures of the nonlinear elastic response of the samples (approximately 3 x 6 x 20 x 5 numbers as each measurement is repeated 3 times) are subjected to careful analysis using model independent statistical methods, principal component analysis and fuzzy clustering. This analysis reveals di erences among the samples and di erences among the nonlinear measures. Four of the nonlinear measures are sensing much the same physical mechanism in the samples. The fth is seeing something di erent. This is the case for all samples. Although the same physical mechanisms (two) are operating in all samples there are distinctive features in the way the physical mechanisms present themselves from sample to sample. This suggests classi cation of the samples into two groups. The numbers in this study and the classi cation of the measures/samples constitute an empirical characterization of rock nonlinear elastic properties that can serve as a valuable testing ground for physically based theories that relate rock nonlinear elastic properties to microscopic elastic features.

36 MATERIALS SCIENCE↗

Identifying dark matter interactions in monojet searches

We study the discrimination of quark-initiated jets from gluon-initiated jets in monojet searches for dark matter using the technique of averaged jet energy profiles. We demonstrate our results in the context of effective field theories of dark matter interactions with quarks and gluons, but our methods apply more generally to a wide class of models. Different effective theories of dark matter and the standard model backgrounds each have a characteristic quark/gluon fraction for the leading jet. When used in conjunction with the traditional cut-and-count monojet search, the jet energy profile can be used to set stronger bounds on contact interactions of dark matter. In the event of a discovery of a monojet excess at the 14 TeV LHC, contact interactions between dark matter with quarks or with gluons can be differentiated at the 95% confidence level. For a given rate at the LHC, signal predictions at direct detection experiments for different dark matter interactions can span five orders of magnitude. Lastly, the ability to identify these interactions allows us to make a tighter connection between LHC searches and direct detection experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sequential Bond Dissociation Energies of Th + (CO) x , x = 3–6: Guided Ion Beam Collision-Induced Dissociation and Quantum Computational Studies

Collision-induced dissociation (CID) of [Th,xC,xO] + , x = 3–6, with Xe is performed using a guided ion beam tandem mass spectrometer (GIBMS). Products are formed exclusively by the loss of CO ligands. Analyses of the kinetic energy-dependent CID product cross sections yield bond dissociation energies (BDEs) of (CO) x–1 Th + –CO at 0 K as 1.09 ± 0.05, 0.82 ± 0.07, 0.63 ± 0.05, and 0.70 ± 0.05 eV, respectively. Different structures of [Th,xC,xO] + were explored using various electronic structure methods, and BDEs for CO ligand loss from precursor [Th,xC,xO] + complexes were computed. Both experimental and theoretical results corroborate that the structures of [Th,xC,xO] + , x = 3–6, formed experimentally are homoleptic thorium cation carbonyl complexes, Th + (CO) x . The nonmonotonic trend in experimental BDEs is reproduced theoretically, although ambiguities in the spin states of the x = 4–6 complexes (doublet or quartet) remain. BDEs calculated at the coupled cluster with single, double, and perturbative triple excitations (CCSD(T))/cc-pVXZ//B3LYP/cc-PVXZ (X = T and Q) level and a complete basis set (CBS) extrapolation agree reasonably well with the experimental values for all complexes. Thorium oxide ketenylidene carbonyl cations, OTh + CCO(CO) y , y = 1–4, were calculated to be the most stable structures of [Th,xC,xO] + , x = 3–6, respectively; however, these are not observed in our experiment. Potential energy profiles (PEPs) having either quartet or doublet spin calculated at the B3LYP/cc-pVQZ level suggest that the failure to observe OTh + CCO(CO) y , y = 1–4, is the result of a barrier corresponding to the C–C bond formation, making the formation of OTh + CCO(CO) y inaccessible kinetically under the present experimental conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of Spin-Unrestricted Density Functional Theory for Redox Properties of Rubredoxin Redox Site Analogues

Systematic studies of the accuracy of density functional theory (DFT) methods, especially the recently developed hybrid generalized gradient approximation (GGA) functionals, for structural and energetic properties of iron-sulfur redox sites are essential before these methods can be used to answer important biological questions about these systems. Here, the geometries, electronic structures, and reduction potentials of redox site analogs of the iron-sulfur protein rubredoxin are investigated using DFT (B3LYP, B97gga1 and BHandH), the Moller-Plesset perturbation theory series (MP2, MP3, MP4SDQ), and coupled cluster (CCSD, CCSD(T)) methods. For the geometries of [Fe(SCH3)4]2-/1- and [Fe(SCH3)3]1-/0, the DFT optimizations give reasonable values and the inclusion of a core electron basis substantially reduces the errors in the calculated geometries. However, for the vertical detachment energy (VDE) and adiabatic detachment energy (ADE) of [Fe(SCH3)4]1- and [Fe(SCH3)3]1-, the B3LYP functional gives the most accurately computed ADE and VDE using DFT, which are comparable with those at the CCSD level of theory. When diffuse functions are added to the sulfur basis set, they have little effect on the geometry optimization but significantly improve the calculated VDE and ADE, which is important for the anionic reduced sites. When multiple polarization functions are added to the sulfur basis set, they lead to a slightly better description of the geometry by giving more angular flexibility but underestimate ADE and VDE, most likely due to overestimating the stabilizing energy of the oxidized sites. Overall, the B3LYP calculations with the more flexible full-core basis sets give a reasonable description both of the geometry and of the ADE and VDE. Thus, improving the basis sets seems to be an efficient and convenient way to obtain reliable reduction potentials of the high-spin iron-sulfur redox sites.

59 BASIC BIOLOGICAL SCIENCES↗

Model validation for inferred hot-spot conditions in National Ignition Facility experiments

Progress toward ignition requires accurately diagnosing current conditions and assessing proximity metrics for implosion experiments on the National Ignition Facility. Hot-spot conditions are not directly measured, but rather inferred, often using simple 0- and 1D models [P. Patel et al., Phys. Plasmas 27, 050901 (2020)]. In this work, we present a detailed accuracy validation exercise using a set of ~20,000 2D simulations encompassing a variety of performance and degradation levels. We find good agreement between the model-inferred pressure and the simulated burn-weighted pressure at peak neutron production and also present results on the precision of inferred quantities using a Markov-Chain Monte Carlo algorithm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the impact of resonant magnetic perturbation fields on gross tungsten erosion using DiMES samples in DIII-D

Here, an experiment was conducted in DIII-D to compare gross tungsten (W) erosion on samples exposed to outer strike point (OSP) sweeps in L-mode plasmas for three conditions. These included two phases of resonant magnetic perturbations (RMPs), and a set with no perturbations. Upon RMP application, lobe structures indicative of strike point splitting of the OSP were evident in divertor camera data and on Langmuir probes. Gross W erosion flux, ${{\rm{\Gamma }}}_{{\rm{W}}},$ inferred spectroscopically using the S/XB method applied to the 400.9 nm W-I line, was generally in the range ${{\rm{\Gamma }}}_{{\rm{W}}}/{{\rm{\Gamma }}}_{{\rm{D}}+,\perp }=2\times {10}^{-4}$ referenced to incident deuterium ion flux ${{\rm{\Gamma }}}_{{\rm{D}}+,\perp },$ and was increased in the RMP cases by no more than 30% of the level observed in unperturbed discharges. A large reduction in gross erosion (50%) was observed in the private flux region at the W sample for one specific toroidal phase of the RMP field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combining diagnostics, modeling, and control systems for automated alignment of the TES beamline

X-ray beamlines are essential components of all synchrotron light sources. Practical operations involve frequent variation in beamline component positions and orientation, particularly when photon beam parameters shift due to experimental needs, or due to variations in the incoming photon beam. The alignment process can be time consuming and takes away from valuable beam time for experimental data collection. We describe progress in the automation of certain alignment tasks on the tender-energy X-ray spectroscopy (TES) beamline at the National Synchrotron Light Source II (NSLS-II). The beamline is controlled using the BlueSky software in which high level experimental plans guide the beamline components during an experiment. Numerous software packages exist for beamline modeling, and they may be tied to the beamline control system using a package we are continuing to develop called Sirepo-Bluesky. The photon beam distribution may be measured with fluorescent screens, and a relation between beam and machine state can be found by varying the mirror and aperture settings over a multi-dimensional range. We describe the results of such parameter varying measurements and how we are combining Sirepo-Bluesky with machine learning methods and reduced models to automate mirror alignment on the TES beamline.

36 MATERIALS SCIENCE↗

Enhancing Photosynthesis Simulation Performance in ESMs with Machine Learning-Assisted Solvers

When simulating vegetation dynamics, photosynthesis accounts for a large fraction of the computational cost in most Earth System Models (ESMs). This is largely since photosynthesis is represented as a system of nonlinear equations, and the solution requires the use of an initial guess followed by many iterations of the numerical solver to obtain a solution. We use machine learning (ML) to replicate the response surface of the model’s numerical solver to improve the choice of initial guess, therefore requiring fewer iterations to obtain a final solution. We implemented this test on the leaf-level calculations as well as at the canopy scale, and for both we observed fewer iterations of the photosynthesis solver when a ML-based initial guess was implemented. The model tested here is the Energy Exascale Earth System Model - Land Model (ELM). The ML-based algorithms used here are trained on simulations from the model itself and used only to improve the initial guess for the solver; therefore, the model maintains its own set of physics to obtain the final solution. This work shows novel ways to utilize ML-based methods to improve the performance of numerical solvers in ESMs.

Massoud, Elias [ORNL] (ORCID:0000000217725361)↗

Verification of Adaptive Protection in Hardware in the Loop for Coordination with Solar Variability

As inverter-based resources continue to be installed at all levels of the electric grid, the fixed protection schemes used at the distribution level will continue to be stressed until they no longer ensure the protection of the grid. Adaptive protection has been proposed as a solution with the ability to update the protection schemes in near real-time to ensure reliability and increase the resilience of the grid. However, weather variability poses a significant challenge to the ability of these methods to keep the selectivity and reliability of these schemes coordinated. If the ramp rates, due to solar variability, of the inverter-based resources change faster than the adaptive protection can issue new settings, the protection system could be uncoordinated, with the wrong device responding to a system fault. The proposed adaptive protection method ensures that due to solar variability, communication, and protection calculation latency, it can issu e coordinated protection settings promptly, in one minute or less. The hardware-in-the-loop results show the protection settings being issued and maintaining system coordination in under a minute.

Summers, Adam↗

Vibrational Spectroscopy for the Determination of Ionizable Group Content in Ionomer Materials

An approach based on vibrational spectral measurements is described for determining the ionizable group content of ion conducting polymer membrane materials. Aimed at supporting the assessment of membrane stability and wear characteristics, performance is evaluated for attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy, confocal Raman microscopy, and ATR FT-IR microscopy using perfluorinated ionomer membrane standards. One set of ionomer standards contained a sulfonic acid ionizable group and the other a sulfonyl imide group. The average number of backbone tetrafluoroethylene (TFE) units separating the ionizable-group containing side chains was in the range of 7.2–2.1 (sulfonic acid set) and 10.5–4.6 (sulfonyl imide set). A poly(tetrafluoroethylene) (PTFE) sample was included as a blank, representing the limit of zero ionizable group (and maximum TFE) content. Calibration relationships were derived from area-normalized vibrational spectra. For all three methods, calibration models applied to independent spectral measurements of samples predicted the ratio of backbone TFE groups to ionizable groups in the repeat unit ( m) with a standard error of ≤ ±0.3. The confocal Raman and ATR FT-IR microscopy techniques achieved ideal blank responses and the lowest prediction errors, down to m ± 0.1 at the 90% confidence level. With its relative simplicity, low sample size requirements, and potential for quantitative micron-scale spatial mapping of the ionizable group content within a membrane, the approach has application to advancing materials development, including exploratory synthesis, durability and wear assessment, and in situ studies of membrane process.

Korzeniewski, Carol↗

Evaluation of a Turbidity Meter for Use at the Defense Waste Processing Facility

Savannah River Remediation’s (SRR’s) Defense Waste Processing Facility (DWPF) Laboratory currently tests for sludge carry-over into the Recycle Collection Tank (RCT) by evaluating the iron concentration in the Slurry Mix Evaporator Condensate Tank (SMECT) and relating this iron concentration to the amount of sludge solids present. A new method was proposed for detecting the amount of sludge in the SMECT that involves the use of an Optek turbidity sensor. Waste Services Laboratory (WSL) personnel conducted testing on two of these units following a test plan developed by Waste Solidification Engineering (WSE). Both Optek units (SN64217 and SN65164) use sensor model AF16-N and signal converter model series C4000. The sensor body of each unit was modified to hold a standard DWPF 12 cc sample vial, also known as a “peanut” vial. The purpose of this testing was to evaluate the use of this model of turbidity sensor, or meter, to provide a measurement of the sludge solids present in the SMECT based upon samples from that tank. During discussions of the results from this study by WSE, WSL, and Savannah River National Laboratory (SRNL) personnel, an upper limit on the acceptable level of solids in SMECT samples was set at 0.14 weight percent (wt%). A “go/no-go” decision criterion was to be developed for the critical turbidity response, which is expressed in concentration units (CUs), for each Optek unit based upon the 0.14 wt% solids value. An acceptable or a “go” decision for the SMECT should reflect the situation that there is an identified risk (e.g. 5%) for a CU response from the Optek unit to be less than the critical CU value when the solids content of the SMECT is actually 0.14 wt% or greater, while a “no-go” determination (i.e., an Optek CU response above the critical CU value, a conservative decision relative to risk) would lead to additional evaluations of the SMECT to better quantify the possible solids content of the tank. Subsequent to the issuance of the initial version of this report but under the scope of the original request for technical assistance, WSE asked for this report to be revised to include the “go/no-go” CU value corresponding to 0.28 wt% solids. It was this request that led to the preparation of Revision 1 of the report. The results for the 0.28 wt% solids value were developed following the same approach as that utilized for the 0.14 wt% solids value. A sludge simulant was used to develop standards for testing both Optek units and to determine the viability of a “go/no-go” CU response for each of the units. Statistical methods were used by SRNL to develop the critical CU value for the “go/no-go” decision for these standards for each Optek unit. Since only one sludge simulant was available for this testing, the sensitivity of these results to other simulants and to actual sludge material is not known. However, limited testing with samples from the actual DWPF process (both SRAT product samples and SMECT samples) demonstrated that the use of the “go/no-go” criteria developed from the sludge simulant testing was conservative for these samples taken from the sludge batch, Sludge Batch 7b, being processed at the time of this testing. While both of the Optek units performed very reliably during this testing, there were statistically significant differences (although small on a practical scale) between the two units. Thus, testing should be conducted on any new unit of this Optek model to qualify it before it is used to support the DWPF operation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adjuvant Chemotherapy With or Without Pelvic Radiotherapy After Simultaneous Surgical Resection of Rectal Cancer With Liver Metastases: Analysis of Prognosis and Patterns of Recurrence

Purpose: To investigate the outcomes of adjuvant chemotherapy (CT) or chemoradiotherapy (CRT) after simultaneous surgical resection in rectal cancer patients with liver metastases (LM). Materials and Methods: One hundred and eight patients receiving total mesorectal excision for rectal cancer and surgical resection for LM were reviewed. Forty-eight patients received adjuvant CRT, and 60 were administered CT alone. Recurrence patterns and prognosis were analyzed. Disease-free survival (DFS) and overall survival (OS) rates were compared between the CRT and CT groups. The inverse probability of the treatment-weighted (IPTW) method based on the propensity score was used to adjust for selection bias between the two groups. Results: At a median follow-up period of 47.7 months, 77 (71.3%) patients had developed recurrences. The majority of recurrences (68.8%) occurred in distant organs. By contrast, the local recurrence rate was only 4.7%. Median DFS and OS were not significantly different between the CRT and CT groups. After applying the IPTW method, we observed no significant differences in terms of DFS (hazard ratio [HR], 1.347; 95% confidence interval [CI], 0.759-2.392; p = 0.309) and OS (HR, 1.413; CI, 0.752-2.653; p = 0.282). Multivariate analyses showed that unilobar distribution of LM and normal preoperative carcinoembryonic antigen level (<6 mg/mL) were significantly associated with longer DFS and OS. Conclusions: The local recurrence rate after simultaneous resection of rectal cancer with LM was relatively low. DFS and OS rates were not different between the adjuvant CRT and CT groups. Adjuvant CRT may have a limited role in this setting. Further prospective randomized studies are required to evaluate optimal adjuvant treatment in these patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mathematical analysis of the dimensional scaling technique for the Schroedinger equation with power-law potentials

The dimensional scaling (D-scaling) technique is an innovative asymptotic expansion approach to study the multiparticle systems in molecular quantum mechanics. It enables the calculation of ground and excited state energies of quantum systems without having to solve the Schroedinger equation. In this paper, we present a mathematical analysis of the D-scaling technique for the Schroedinger equation with power-law potentials. By casting the D-scaling technique in an appropriate variational setting and studying the corresponding minimization problem, the D-scaling technique is justified rigorously. A new asymptotic dimensional expansion scheme is introduced to compute asymptotic expansions for ground state energies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-body nucleon-nucleon correlations in Glauber models of relativistic heavy-ion collisions

We investigate the influence of the central two-body nucleon-nucleon correlations on several quantities observed in relativistic heavy-ion collisions. It is demonstrated with explicit Monte Carlo simulations that the basic correlation measures observed in relativistic heavy-ion collisions, such as the fluctuations of participant eccentricity, initial size fluctuations, or the fluctuations of the number of sources producing particles, are all sensitive to the inclusion of the two-body correlations. The effect is at the level of about 10-20%. Moreover, the realistic (Gaussian) correlation function gives indistinguishable results from the hard-core repulsion, with the expulsion distance set to 0.9 fm. Thus, we verify that for investigations of the considered correlation measures, it is sufficient to use the Monte Carlo generators accounting for the hard-core repulsion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Method for Implementing Subsurface Solid Derived Concentration Guideline Levels (DCGL) - 12331

The U.S. Nuclear Regulatory Commission (NRC) and other federal agencies currently approve the Multi-Agency Radiation Site Survey and Investigation Manual (MARSSIM) as guidance for licensees who are conducting final radiological status surveys in support of decommissioning. MARSSIM provides a method to demonstrate compliance with the applicable regulation by comparing residual radioactivity in surface soils with derived concentration guideline levels (DCGLs), but specifically discounts its applicability to subsurface soils. Many sites and facilities undergoing decommissioning contain subsurface soils that are potentially impacted by radiological constituents. In the absence of specific guidance designed to address the derivation of subsurface soil DCGLs and compliance demonstration, decommissioning facilities have attempted to apply DCGLs and final status survey techniques designed specifically for surface soils to subsurface soils. The decision to apply surface soil limits and surface soil compliance metrics to subsurface soils typically results in significant over-excavation with associated cost escalation. MACTEC, Inc. has developed the overarching concepts and principles found in recent NRC decommissioning guidance in NUREG 1757 to establish a functional method to derive dose-based subsurface soil DCGLs. The subsurface soil method developed by MACTEC also establishes a rigorous set of criterion-based data evaluation metrics (with analogs to the MARSSIM methodology) that can be used to demonstrate compliance with the developed subsurface soil DCGLs. The method establishes a continuum of volume factors that relate the size and depth of a volume of subsurface soil having elevated concentrations of residual radioactivity with its ability to produce dose. The method integrates the subsurface soil sampling regime with the derivation of the subsurface soil DCGL such that a self-regulating optimization is naturally sought by both the responsible party and regulator. This paper describes the concepts and basis used by MACTEC to develop the dose-based subsurface soil DCGL method. The paper will show how MACTEC's method can be used to demonstrate that higher concentrations of residual radioactivity in subsurface soils (as compared with surface soils) can meet the NRC's dose-based regulations. MACTEC's method has been used successfully to obtain the NRC's radiological release at a site with known radiological impacts to subsurface soils exceeding the surface soil DCGL, saving both time and cost. Having considered the current NRC guidance for consideration of residual radioactivity in subsurface soils during decommissioning, MACTEC has developed a technically based approach to the derivation of and demonstration of compliance with subsurface soil DCGLs for radionuclides. In fact, the process uses the already accepted concepts and metrics approved for surface soils as the foundation for deriving scaling factors used to calculate subsurface soil DCGLs that are at least equally protective of the decommissioning annual dose standard. Each of the elements identified for consideration in the current NRC guidance is addressed in this proposed method. Additionally, there is considerable conservatism built into the assumptions and techniques used to arrive at subsurface soil scaling factors and DCGLs. The degree of conservatism embodied in the approach used is such that risk managers and decision makers approving and using subsurface soil DCGLs derived in accordance with this method can be confident that the future exposures will be well below permissible and safe levels. The technical basis for the method can be applied to a broad variety of sites with residual radioactivity in subsurface soils. Given the costly nature of soil surveys, excavation, and disposal of soils as low-level radioactive waste, MACTEC's method for deriving and demonstrating compliance with subsurface soil DCGLs offers the possibility of significant cost savings over the traditional approach of applying surface soil DCGLs to subsurface soils. Furthermore, while yet untested, MACTEC believes that the concepts and methods embodied in this approach could readily be applied to other types of contamination found in subsurface soils. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessing thermal comfort and participation in residential demand flexibility programs

Residential space-conditioning-based demand flexibility (DF) has become an increasingly sought-after method for demand-side load management to enhance grid reliability and facilitate integration of renewable energy generation. However, predicting the effectiveness and flexibility of residential DF resources is challenging due to the variability in household energy use behaviors. Current estimates show that only 50 % of projected savings from DF resources are actualized due to regulatory, technological, and social barriers. From a household perspective, concerns over thermal comfort during space conditioning-based DF events significantly impact participation decisions. Currently, there is a very limited understanding of how thermal comfort during space-conditioning-based DF events in real-world settings impacts household energy use behaviors and, consequently, the success of DF programs in achieving targeted savings. This paper proposes a method to comprehensively assess the thermal comfort implications of DF strategies and presents results of their impacts on DF event participation decisions and demand savings. Here, the proposed method was applied to a heat pump DF field study in Cordova, Alaska. The study’s key findings are: 1) DF event setpoint offsets that maintain indoor operative temperatures between 18 to 22 °C (65 to 71°F) may be preferred in Cordova, Alaska; 2) Household-level thermal comfort is more sensitive to the duration of the DF event than to the degree of temperature offset from baseline conditions; 3) The delayed impact of changes in indoor operative temperature in response to setpoint offsets, both during and after a DF event, influences occupants’ thermal comfort perceptions and willingness to persistently participate in events. The findings from application of the proposed method can help inform future larger-scale occupant-centric DF programs as it can capture information not readily available through utility and device-level energy use data. Thus, it can supplement these sources and help program administrators develop occupant-centric DF strategies, enabling more accurate predictions of participation rates and savings estimates for space-conditioning-based DF programs.

Demand side management↗

LUXSim: A component-centric approach to low-background simulations

Geant4 has been used throughout the nuclear and high-energy physics community to simulate energy depositions in various detectors and materials. These simulations have mostly been run with a source beam outside the detector. In the case of low-background physics, however, a primary concern is the effect on the detector from radioactivity inherent in the detector parts themselves. From this standpoint, there is no single source or beam, but rather a collection of sources with potentially complicated spatial extent. LUXSim is a simulation framework used by the LUX collaboration that takes a component-centric approach to event generation and recording. A new set of classes allows for multiple radioactive sources to be set within any number of components at run time, with the entire collection of sources handled within a single simulation run. Various levels of information can also be recorded from the individual components, with these record levels also being set at runtime. This flexibility in both source generation and information recording is possible without the need to recompile, reducing the complexity of code management and the proliferation of versions. Within the code itself, casting geometry objects within this new set of classes rather than as the default Geant4 classes automatically extends this flexibility to every individual component. No additional work is required on the part of the developer, reducing development time and increasing confidence in the results. Here, we describe the guiding principles behind LUXSim, detail some of its unique classes and methods, and give examples of usage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗