Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Elaborating the phases and mechanical properties of multiphase alloy: Experimental two-dimensional mapping combined with theoretical calculations

Highlights: • Mechanical modulus and hardness distribution mapping is obtained for the first time by NanoBlitz 3D. • Phases mapping and exact element ratio are characterized for the nano multielement carbides by EPMA. • Carbides types are confirmed by acid etching and XRD refinement. • Young's modulus of multiple carbides is verified by DFT calculations and Voigt-Reuss-Hill model. - Abstract: The relationship between types of phases, microstructure and mechanical properties is always a critical challenge for the research and application of multiphase alloys. We report for the first time that NanoBlitz 3D method implemented in iNano is used to investigate the distribution of micro mechanical modulus and hardness for the entire complex multiphase alloy Fe-6.0W-5.0Mo-4.0Cr-2.0V-0.83C by constructing the two-dimensional mapping. In order to build the correlation between the microstructure and properties, the carbides in this tempering state steel are confirmed to be Fe{sub 3}(W, Mo){sub 3}C, Cr{sub 15.58}Fe{sub 7.42}C{sub 6} and V{sub 8}C{sub 7} by acid etching and XRD refinement. The phases mapping is obtained by electron probe micro-analysis. Exact element ratio is characterized for the nano-scale multielement carbides precipitates. The Young's modulus and hardness of the precipitated carbides are up to 330 GPa and 22 GPa, respectively. The distribution range of Young's modulus and hardness is during 150 to 250 GPa and 2.5 to 7.0 GPa for the matrix phases, respectively. The experimental Young's modulus and hardness results are verified by first-principles calculations combined with Voigt-Reuss-Hill approximation. In fact, this work provides a successful demonstration to three-dimensionally characterize the micro mechanical properties for all the ceramics and alloys.

36 MATERIALS SCIENCE↗

Laser‐Powder Melt Pool Solidification Dynamics and Microstructural Engineering of Ti‐5553 Microlattices

The fine geometric and topological control afforded by additive manufacturing technologies has enabled the manufacture of architected materials across length scales, and enabling tunable mechanical performance as a function of local and global design. Progress has been made to tune the mechanical response of architected materials through geometry, but understanding how the geometry and processing conditions will inform the microstructure remains a challenge due to the rapid solidification in laser powder bed fusion. This study uses in situ X-ray imaging and electron backscatter diffraction microscopy to demonstrate that the melt pool size, microstructure morphology, and elastic strain distribution is influenced by a combination of lattice geometry and laser processing conditions. These results indicate that within larger melt pools the local thermal gradients are sufficient to enable a columnar-to-equiaxed transition across the melt pool. Furthermore, the solidification mechanisms producing these microstructures are examined across the first 5 ms of melting and solidification, described via in situ high-speed X-ray imaging and mirrored via multiphysics simulation.

additive manufacturing↗

Simulations of irradiated-enhanced segregation and phase separation in Fe–Cu–Mn alloys

For reactor pressure vessel steels, the addition of Cu, Mn, and Ni has a positive effect on mechanical, corrosion and radiation resistance properties. However, experiments show that radiation-enhanced segregation and/or phase separation is one of important material property degradation processes. In this work, we developed a model integrating rate theory and phase-field approaches to investigate the effect of irradiation on solute segregation and phase separation. The rate theory is used to describe the accumulation and clustering of radiation defects while the phase-field approach describes the effect of radiation defects on phase stability and microstructure evolution. The Fe-Cu-Mn ternary alloy is taken as a model system. The free energies used in the phase-field model are from CALPHAD. Spatial dependent radiation damage from atomistic simulations is introduced into the simulation cell for a given radiation dose rate. The radiation effect on segregation and phase separation is taken into account through the defect concentration dependence of solute mobility. With the model the effect of temperatures and radiation rates on Cu and Mn segregation and Cu-rich phase nucleation are systematically investigated. The segregation and nucleation mechanisms are analyzed. The simulations demonstrated that the nucleus of Cu precipitates has a core-shell composition profile, i.e., Cu rich at center and Mn rich at the interface, in good agreement with the theoretical calculation as well as experimental observations.

Li, Boyan↗

Applications of Transient Grating Spectroscopy to Radiation Materials Science

Radiation damage is an inherently multi-scale phenomenon, with much of the key material evolution occurring at the mesoscale. Current techniques for the direct interrogation of material property changes due to irradiation either function with very small volumes, such as in-situ TEM, cannot cover the full range of defect populations produced, such as in positron annihilation spectroscopy, or requires destruction of the test material, such as in standard or micromechanical testing. In addition, the ultimate quantities of interest to radiation materials scientists are the changes in key material properties with irradiation. These include stiffness, ductility, and thermal conductivity for structural materials, and optical properties such as index of refraction or changes in transmittance spectra for optically active materials. The latter of these are often correlated directly to stress- or thermally-induced changes, themselves a function of the specific defect populations responsible for their change. The rapid study of such a mesoscale phenomenon requires an inherently mesoscale technique, where multiple quantities of interest can be accurately measured in very short times. Determining the sensitivity of any technique with known certainly is of critical importance to qualifying a new technique to measure in-situ material property changes during irradiation. In this paper, we present the new applicability of an existing technique, known as transient grating (TG) spectroscopy, to rapidly and accurately study key problems in radiation materials science. Results quantifying the absolute sensitivity of the technique are presented, alongside molecular dynamics (MD) simulations of the TG spectroscopy process to gauge direct agreement between theory, simulation, and experiment. An example problem of interest is demonstrated as an illustration of what is possible, showing elastic and thermal changes in irradiated silicon carbide (SiC) films. Finally, future work to quantify the effects of experimentally-simulated radiation defects is proposed, in support of building a database to use TG spectroscopy to deconvolve irradiated material property changes in-situ in terms of the defect populations responsible for their evolution. The application of the TG spectroscopy technique to in-situ radiation materials science has the potential to answer long-standing questions in the field, relating to ion beam rastering, the onset of void swelling, and direct measurement of radiation-created point defect concentrations. Before it can do so, the technique must carefully be analyzed and tuned to increase its sensitivity, the certainty of its results, and the ability to predict radiation-induced changes by simulations must be developed. Making such measurements in-situ with the aid of predictive MD simulations has the potential to elucidate mechanisms of radiation damage accumulation, as well as more rapidly qualify radiation-resistant alloys for service in nuclear systems. Work is underway to build this database of experimentally-simulated radiation-produced defects, which will be combined and compared with actual irradiated materials for eventual in-situ deconvolution of the TG signal into the defect populations responsible for irradiation-induced microstructural change. (authors)

36 MATERIALS SCIENCE↗

Electrochemical Corrosion and In vitro Biocompatibility Performance of AZ31Mg/Al{sub 2}O{sub 3} Nanocomposite in Simulated Body Fluid

In this present investigation, AZ31 alloy nanocomposite was prepared with the inclusion of Al{sub 2}O{sub 3} nanoparticles using innovative disintegrated melt deposition (DMD) process followed by hot extrusion to improve the corrosion resistance and in vitro biocompatibility in simulated body fluid (SBF). This investigation systematically inspected the degradation performances of AZ31 alloy with Al{sub 2}O{sub 3} nanoparticles through hydrogen evolution, weight loss and electrochemical methods in SBF. Further, the surface microstructure with the in vitro mineralization of the alloys in SBF was characterized by XRD, XPS, and SEM/EDS analysis. It was seen that the addition of Al{sub 2}O{sub 3} nanoparticles significantly decreased the weight loss of AZ31 alloy substrates after 336 h of exposure in SBF. The corrosion resistance of the monolithic and nanocomposite samples was evaluated using potentiodynamic polarization tests, electrochemical impedance spectroscopy measurements in short- and long-term periods. Accordingly, the electrochemical analysis in SBF showed that the corrosion resistance performance of the AZ31 alloy enhanced considerably due to the incorporation of Al{sub 2}O{sub 3} nanoparticles as reinforcement. Moreover, the rapid formation of bone-like apatite layer on the surface of the nanocomposite substrate demonstrated a good bioactivity of the nanocomposite samples in SBF.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel

Controlled austenite decomposition in a cold-rolled steel was carried out in a hot-dip process simulator with different inter-critical annealing process parameters to produce dual-phase steel consisting of martensite phase fraction above 50%. The evolving microstructure was characterized by using scanning electron microscope and electron backscattered diffraction techniques. Macro- and micro-texture was characterized by using x-ray diffraction and electron backscattered diffraction techniques, respectively. Uniaxial tensile deformation showed a very good combination of ultra-high strength above 900 MPa with uniform elongation of above 7%. An anomalous increase in ductility was observed for steel with high martensite volume fraction of 62.2% compared to that of lower fraction of 52.3%, indicating the influence of size and spatial distribution arrangement of ferrite and martensite phases. The enhancement in the ductility with high strength was attributed to the improved plastic deformability of hard fine martensite phase along with fine ferrite surrounding it. The nature of micro- and macro-texture was also found to affect strain partitioning compatibility between ferrite and martensite in this study.

36 MATERIALS SCIENCE↗

Best of both worlds: Enforcing detailed balance in machine learning models of transition rates

The slow microstructural evolution of materials often plays a key role in determining material properties. When the unit steps of the evolution process are slow, direct simulation approaches such as molecular dynamics become prohibitive and Kinetic Monte-Carlo (kMC) algorithms, where the state-to-state evolution of the system is represented in terms of a continuous-time Markov chain, are instead frequently relied upon to efficiently predict long-time evolution. The accuracy of kMC simulations however relies on the complete and accurate knowledge of reaction pathways and corresponding kinetics. This requirement becomes extremely stringent in complex systems such as concentrated alloys where the astronomical number of local atomic configurations makes the a priori tabulation of all possible transitions impractical. Machine learning models of transition kinetics have been used to mitigate this problem by enabling the efficient on-the-fly prediction of kinetic parameters. While conventional KMC methods based on transition state theory naturally yield reversible dynamics that exactly obey the detailed balance criterion, providing strong guarantees on the properties of the stationary distribution, many recently-proposed ML-based approaches to barrier predictions provide no such guarantees. In this study, we derive conditions under which physics-informed ML architectures exactly enforce the detailed balance condition by construction, even when relying on non-extensive descriptions of states in terms of local environments around mobile defects. In conclusion, using the diffusion of a vacancy in a concentrated alloy as an example, we show that such ML architectures also exhibit superior performance in terms of prediction accuracy, demonstrating that the imposition of physical constraints can facilitate the accurate learning of barriers at no increase in computational cost.

36 MATERIALS SCIENCE↗

Indentation investigation of 304L stainless steel friction stir weld simulated crack repair

Simulated cracks were repaired in 304L stainless steel using low temperature friction stir welding. Indentation studies were carried out to understand the effect of microstructural features on the mechanical property variation across the weld and to measure the size of the weld zones with a quantitative technique. Microhardness and nanoindentation hardness profiles were constructed on a transverse section across the weld. The data obtained were correlated by extrapolating the nanoindentation hardness to greater depths which showed that the nanoindentation hardness closely reflects the microhardness values throughout the weld. Finally, grain size in the stir zone (SZ) was found to vary with the tool temperature which, in turn, alters the nanoindentation modulus variability and higher tool temperature resulted in widening of the SZ.

36 MATERIALS SCIENCE↗

Microstructures of ZnO films deposited on (0001) and r-cut α-Al2O3 using metal organic chemical vapor deposition

Zinc oxide films were deposited on (0001) and r-cut α-Al2O3 under identical conditions using metal organic chemical vapor deposition. Microstructures of the ZnO films were studied in detail using conventional and high-resolution transmission electron microscopy (HRTEM), electron diffraction, and HRTEM image simulations. The films deposited on these two substrates show distinctive structural differences. The film grown on r-cut α-Al2O3 shows a high quality single crystal with an orientation relationship of α-Al2O3[-101-1]//ZnO[0001] and α-Al2O3(10-1-2)//ZnO(2-1-10). The interface between the film and the substrate was abrupt and decorated with high density of misfit dislocations. Film grown on α-Al2O3 (0001) shows several orientation domains. Typically, one domain correspond to the classic growth model such that α-Al2O3 (0001)//ZnO(0001) and α-Al2O3 [11-20]//ZnO[10-10]. Another domain corresponds to the growth mode such that α-Al2O3 [11-20]//ZnO[10-10] but the (0001) plane of ZnO is tilted relative to the (0001) plane of α-Al2O3 such that ZnO(0001) is almost parallel to the α-Al2O3 (-1104) plane. This orientation reduces the extent of lattice mismatch as compared with the classic growth mode. The interface between ZnO and α-Al2O3 is abrupt and possesses periodic dislocations.

36 MATERIALS SCIENCE↗

Anisotropic Hot Spot Formation at a Grain Boundary in Shock-Compressed TATB High Explosive Crystal

Secondary high explosives (HEs) exhibit rich microstructure that promotes the formation of hot spots responsible for detonation initiation, but the role of microstructural interfaces remains poorly quantified. To this end, we develop extensions for the generalized crystal-cutting method (GCCM) to prepare molecular dynamics (MD) simulation cells containing grain boundaries (GBs) and other crystal–crystal interfaces with prescribed tilt and twist orientations. Using the GCCM, we perform MD simulations of shock interactions with a GB between the (001) and (100) crystal facets in the secondary HE TATB (1,3,5-triamino-2,4,6-trinitrobenzene). Our MD simulations reveal a strong directional dependence to the formation of a hot spot at the GB interface. In particular, transmission of the shock from the (001) grain to the (100) grain yields a hot spot in the (100) grain at the GB interface, whereas no hot spot is produced when an equivalent shock transits the GB in the opposite direction. We trace the origin of this GB anisotropy to three dominant factors: (1) the intrinsic differences in shock-deformation mechanisms and wave structures for the bulk (100) and (001) grains, which leads to distinct geometries and mechanical impedances upon shock arrival to the GB depending on which grains are donor or acceptor for the transmitted shock; (2) the different time intervals separating the initial shock rise and the formation of steady wave structures in the respective donor–acceptor configurations; and (3) the differences in time scales required to re-establish local thermal equilibrium. Interfacial hot spots form when these factors combine to impede development of a steady two-wave structure and instead induce a localized, pseudosingly shocked region that undergoes a higher rate of work production (resulting in a higher temperature) compared to when the steady two-wave structure develops further from the interface. The extensions to the GCCM approach presented here are anticipated to facilitate a wide range of MD studies that focus on understanding the role of crystal–crystal interfaces in molecular materials.

organic↗

Electronic Structure, Optical Properties, and Pressure Behavior of the CdB{sub 4}O{sub 7} and HgB{sub 4}O{sub 7} Compounds

Ab initio calculations of the structural, electronic, and optical properties of the CdB{sub 4}O{sub 7} and HgB{sub 4}O{sub 7} tetraborate compounds in three structural modifications with the Pbca, Cmcm, and Pmn2{sub 1} symmetry have been performed in the framework of the density functional theory using the VASP package. The calculations of the electronic band structure showed that these compounds in all the investigated modifications are dielectrics with a band gap of 2–4 eV. The calculation of the structural properties of the tetraborates under pressure showed that the phase transition between the Pbca and Pmn2{sub 1} structures in cadmium and mercury tetraborates occurs under pressures of 4.8 and 4.7 GPa, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding materials microstructure and behavior at the mesoscale

Taking the mesoscale to mean length and time scales at which a material’s behavior is too complex to be understood by construction from the atomistic scale, we focus on three-dimensional characterization and modeling of mesoscale responses of polycrystals to thermal and mechanical loading. Both elastic and plastic internal structural responses are now accessible via high-energy x-ray probes. The combination of diffraction experiments and computed tomography, for example, is yielding new insights into how void formation correlates with microstructural features such as grain boundaries and higher-order junctions. The resulting large, combined data sets allow for validation of micromechanical and thermal simulations. As detectors improve in resolution, quantum efficiency, and speed of readout, data rates and data volumes present computational challenges. Spatial resolutions approach one micrometer, while data sets span a cubic millimeter. Examples are given of applications to tensile deformation of copper, grain growth in nickel and titanium, and fatigue cracks in superalloys.

36 MATERIALS SCIENCE↗

Analyzing the effect of pressure on the properties of point defects in $\gamma\mathrm{U–Mo}$ through atomistic simulations

Uranium–molybdenum (U–Mo) alloys in monolithic fuel foil are the primary candidate for the conversion of high-performance research reactors in the USA. Monolithic fuel is utilized in a plate-type design with a zirconium diffusion barrier and aluminum cladding. These fuel types are unique in that they contain no plenum for the release of fission gases, which, in conjunction with the aluminum cladding, can lead to large stress states within the fuel. The nature of how fundamental processes of radiation damage, including the evolution of point defects, under such stresses occur is unknown. In this work, we present molecular dynamics simulations of the formation energy of point defects under applied stress. We report this work will allow for the implementation of stress-dependent microstructural evolution models of nuclear fuels, including those for both fission gas bubble growth and creep, which are critical to ensure the stable and predictable behavior of research reactor fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Report on Aging and Irradiation Theoretical Model Development for Alloy 690 in Grizzly

This report describes the current efforts to implement a model to predict the engineering scale behavior of irradiated and aged Ni 2 Cr model alloy and Alloy 690 into the Grizzly software. Grizzly is a multiphysics simulation code under development at Idaho National Laboratory to simulate aging mechanisms and their effects on the integrity of critical LWR components. Engineering scale behavior of materials are strongly impacted by the underlying microstructure: the distribution and interaction of dislocations and defects within the individual grains dictates how the material will respond to loading. The evolution of these dislocations and defects determines how the engineering scale material will perform under different loading and environmental conditions. Mesoscale models can function as a bridge to connect microstructure evolution models to engineering models of the ductile-brittle transition temperature (DBTT) curve and fracture. The toughness of a material, which governs the engineering scale fracture behavior, is a function of both elastic deformation and plastic deformation. While the yield stress measurements capture the elastic contribution to a material’s toughness, information about the dislocation movement is required to understand the plastic component of toughness. Crystal plasticity models predict dislocation density evolution and thereby connect microstructure evolution to engineering scale behavior predictions. These models calculate the plastic strain within a metal as a function of dislocations and other crystal defects, including precipitates and interstitial loops, among others, by tracking dislocation movement and the interaction of these dislocations with the crystal defects. Within NiCr alloys, long-range ordered (LRO) precipitates form under aging conditions. These precipitates act as barriers to dislocation motion and are either sheared by dislocations or pin dislocations. Additional defects, such as stacking fault tetrahedra (SFTs) from irradiation damage, also impede dislocation motion in these alloys. A crystal plasticity mode for Ni 2 Cr model alloy and Alloy 690 is being currently implemented in the Grizzly code at INL. This report includes a description of the theoretical models incorporated into the Grizzly crystal plasticity code. These theoretical models include mechanisms for dislocation glade and twinning as well as dislocation-defect interaction relationship for both LRO precipitates and SFTs. We have selected these dislocation models based on the deformation mechanisms observed in experimental micropillar compression tests conducted on the Ni 2 Cr model alloy. The models are then extended to Alloy 690 with ongoing parameter fitting.

36 MATERIALS SCIENCE↗

Contribution of intragranular misorientations to the cold rolling textures of ferritic stainless steels

A combined experimental and simulation study of intragranular misorientation and texture development in ferritic stainless steels is presented herein. Cold rolling was performed on materials having different grain shapes to reveal variations of misorientations and texture with variations in microstructure. The experimental results were compared with predictions of the Visco-Plastic Self-Consistent (VPSC) model and the recently developed Grain-Fragmentation Visco-Plastic Self-Consistent (GF-VPSC) model. It is shown that the GF-VPSC model, incorporating the development of intragranular misorientations, provides a much better prediction of the texture strength compared to the standard VPSC model. The predictions of intragranular misorientation are also in good agreement with experimental measurements. Both experiments and simulations point to the importance of anisotropy of intragranular misorientation distributions in determining texture development and, importantly, texture strength.

36 MATERIALS SCIENCE↗

SOC Microstructural Property Estimator

This pre-trained ML model is a tool that uses basic compositional parameters for porous solid oxide cell (SOC) electrodes - the phase fractions and mean particle/pore diameters – as inputs and uses them to estimate additional electrochemical performance parameters: active (i.e., connected) TPB density, all tortuosity factors, and phase pair specific interfacial areas. The electrode is assumed to be composed of two solid phases and a pore phase. The property calculations are performed using neural network regression models trained on a large bank of synthetic electrode microstructural data that NETL has generated using the program DREAM3D (that bank is also hosted on EDX: https://edx.netl.doe.gov/dataset/soc-synthetic-microstructure-bank). This means the generated parameters are based on training from actual measured properties from 3D microstructures, not estimated from geometric simplifications. This tool was developed and is intended to replace percolation theory calculations in models that use hypothetical electrode properties. An example use case would be running SOC performance simulations across a parametric sweep of electrode designs (e.g., varying phase fractions and particle sizes) and assessing how it impacts the electrochemical performance of the SOC. Within the parameter space of the training data (statistics of that parameter space is provided in the readme file), this model achieves sub-5% mean absolute percent errors, an order of magnitude less error than percolation theory across the same parameter space. However, be aware that this tool was developed with parametric simulations in mind, and users are encouraged to assess accuracy for their own specific use case rather than taking accuracy metrics at face value. More info, including a usage guide, is in the included readme file. This tool should be cited with the DOI number provided.

Electrode Microstructure↗

Nanoscale reshaping of resonant dielectric microstructures by light-driven explosions

Femtosecond-laser-assisted material restructuring employs extreme optical intensities to localize the ablation regions. To overcome the minimum feature size limit set by the wave nature of photons, there is a need for new approaches to tailored material processing at the nanoscale. Here, we report the formation of deeply-subwavelength features in silicon, enabled by localized laser-induced phase explosions in prefabricated silicon resonators. Using short trains of mid-infrared laser pulses, we demonstrate the controllable formation of high aspect ratio (>10:1) nanotrenches as narrow as ~ $λ / 80$. The trench geometry is shown to be scalable with wavelength, and controlled by multiple parameters of the laser pulse train, such as the intensity and polarization of each laser pulse and their total number. Particle-in-cell simulations reveal localized heating of silicon beyond its boiling point and suggest its subsequent phase explosion on the nanoscale commensurate with the experimental data. The observed femtosecond-laser assisted nanostructuring of engineered microstructures (FLANEM) expands the nanofabrication toolbox and opens exciting opportunities for high-throughput optical methods of nanoscale structuring of solid materials.

42 ENGINEERING↗

Mechanism of β-FeSi{sub 2} precipitates growth-and-dissolution and pyramidal defects' formation during oxidation of Fe-contaminated silicon wafers

Fe-implanted Si-wafers have been oxidized at 900 °C and 1100 °C in order to investigate the behaviour of Fe atoms at the growing SiO{sub 2}/Si interface and the impact on the integrity of microelectronic devices of an involuntary Fe contamination before or during the oxidation process. As-implanted and oxidized wafers have been characterized using secondary ion mass spectroscopy, atom probe tomography, and high-resolution transmission electron microscopy. Experimental results were compared to calculated implantation profiles and simulated images. Successive steps of iron disilicide precipitation and oxidation were evidenced during the silicon oxidation process. The formation of characteristic pyramidal-shaped defects, at the SiO{sub 2}/Si interface, was notably found to correlate with the presence of β-FeSi{sub 2} precipitates. Taking into account the competitive oxidation of these precipitates and of the surrounding silicon matrix, dynamic mechanisms are proposed to model the observed microstructural evolution of the SiO{sub 2}/Si interface, during the growth of the silicon oxide layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗