Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Surface structure and equilibrium particle shape of the LiMn 2 O 4 spinel from first-principles calculations

First-principles density functional calculations were used to calculate surface properties of the LiMn 2 O 4 spinel. The calculations were benchmarked to obtain the correct semiconducting, Jahn-Teller distorted electronic ground state of bulk LiMn 2 O 4 and, using the same parameters, the predominant low-index polar surface facets (100), (110), and (111) were calculated to study their structure and stability. Following an investigation of possible surface terminations as well as surface layer reconstructions we find that the (111) LMO surface stabilizes through a targeted site exchange of the undercoordinated surface Mn cations with fully coordinated tetrahedral subsurface Li cations, effectively creating a partial inverse spinel arrangement at the surface. This reconstruction renders the (111) facet the most stable among the investigated facets. Here, the equilibrium (Wulff) shape of a LiMn 2 O 4 particle was constructed and exhibits a cubo-octahedral shape with predominant (1 1 1) facets, in agreement with common experimental findings for the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical measure of disorder: Why Urbach analysis works for amorphous silicon but fails for amorphous carbon

We investigate the basis for the Paradox where the Urbach-slope disorder parameter disagrees with the Raman width in amorphous diamond-like carbon (DLC) materials (lower Urbach-Eo yet greater Raman width). We examined the bandgap and Urbach-slope measurement issues. While significant errors are identified, ultimately these cannot resolve the Paradox. This resolution involves large changes in shape of DLC's absorption band resulting from large energy shifts. To solidify the understanding of band energy shifts, we examined their properties using a-Si:H, well known for its agreement between Raman and Urbach-slope disorder parameters. Using Tauc-Lorentz (T-L) dispersion functions, the Urbach method works for a-Si:H because small changes in shape occur, as measured by (i) peak position, (ii) peak width, (iii) peak amplitude, and (iv) and gap energies. Moreover, for a-Si:H, a 5th condition (v) there is no other feature below the principal band to interfere with its fall. All 5 of these conditions fail for DLCs. Because T-L dispersions accommodate asymmetry, we traced the Paradox to a steepening of the band shape as it pushes toward lower energy. This steepening is unrelated to disorder, but to a boundary value problem where energy cannot be negative. We conclude that Urbach analysis is invalid for DLC materials, but the T-L width is a good measure instead. We also examined another disorder measure, where π bonds should be considered as disorder relative to the σ bonds in an idealized “amorphous diamond” sp 3 network: superconvergence can be used to quantify these π transitions. Finally, further molecular orbital calculations are needed to properly interpret the changes in T-L widths.

36 MATERIALS SCIENCE↗

ON THEORIES FOR STOCHASTIC ACCELERATION IN THE SOLAR WIND

The suprathermal tails on the distribution functions of ions in the solar wind are observed to have a common spectral shape in many different circumstances: a power law in particle speed with spectral index of -5. Three possible approaches for explaining these observations are considered: (1) the acceleration mechanism of Fisk and Gloeckler in which energy is redistributed from a core particle population into the suprathermal tail; (2) traditional stochastic acceleration in which particles are accelerated by damping turbulence; and (3) the statistical approach introduced by Schwadron et al. in which the -5 spectrum is formed by averaging over individual spectra. The acceleration mechanism of Fisk and Gloeckler has advantages: (1) it appears to occur in conditions that are readily satisfied: compressive turbulence that is thermally isolated (no large-scale spatial gradients), with a core distribution of particles with a sharp initial cutoff in particle speed, above which particles can spatially diffuse; and (2) it yields spectra that are consistent with observations. Traditional stochastic acceleration has the disadvantage that it is unlikely to yield spectral shapes consistent with observations, and the spectra are dependent upon the plasma conditions and thus unlikely to be the same in different circumstances. The statistical approach of Schwadron et al. can yield the -5 spectrum and is consistent with the results of Fisk and Gloeckler when the assumed distribution functions for individual events and the averaging technique are taken to be compatible with the assumptions and averaging in Fisk and Gloeckler.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of miniature electronic brachytherapy x-ray sources based on TG-43U1 formalism using Monte Carlo simulation techniques

Purpose: The goal of this study is to determine a method for Monte Carlo (MC) characterization of the miniature electronic brachytherapy x-ray sources (MEBXS) and to set dosimetric parameters according to TG-43U1 formalism. TG-43U1 parameters were used to get optimal designs of MEBXS. Parameters that affect the dose distribution such as anode shapes, target thickness, target angles, and electron beam source characteristics were evaluated. Optimized MEBXS designs were obtained and used to determine radial dose functions and 2D anisotropy functions in the electron energy range of 25-80 keV. Methods: Tungsten anode material was considered in two different geometries, hemispherical and conical-hemisphere. These configurations were analyzed by the 4C MC code with several different optimization techniques. The first optimization compared target thickness layers versus electron energy. These optimized thicknesses were compared with published results by Ihsan et al.[Nucl. Instrum. Methods Phys. Res. B 264, 371-377 (2007)]. The second optimization evaluated electron source characteristics by changing the cathode shapes and electron energies. Electron sources studied included; (1) point sources, (2) uniform cylinders, and (3) nonuniform cylindrical shell geometries. The third optimization was used to assess the apex angle of the conical-hemisphere target. The goal of these optimizations was to produce 2D-dose anisotropy functions closer to unity. An overall optimized MEBXS was developed from this analysis. The results obtained from this model were compared to known characteristics of HDR {sup 125}I, LDR {sup 103}Pd, and Xoft Axxent electronic brachytherapy source (XAEBS) [Med. Phys. 33, 4020-4032 (2006)]. Results: The optimized anode thicknesses as a function of electron energy is fitted by the linear equation Y ({mu}m) = 0.0459X (keV)-0.7342. The optimized electron source geometry is obtained for a disk-shaped parallel beam (uniform cylinder) with 0.9 mm radius. The TG-43 distribution is less sensitive to the shape of the conical-hemisphere anode than the hemispherical anode. However, the optimized apex angle of conical-hemisphere anode was determined to be 60 deg. For the hemispherical targets, calculated radial dose function values at a distance of 5 cm were 0.137, 0.191, 0.247, and 0.331 for 40, 50, 60, and 80 keV electrons, respectively. These values for the conical-hemisphere targets are 0.165, 0.239, 0.305, and 0.412, respectively. Calculated 2D anisotropy functions values for the hemispherical target shape were F(1 cm, 0 deg.) = 1.438 and F(1 cm, 0 deg.) = 1.465 for 30 and 80 keV electrons, respectively. The corresponding values for conical-hemisphere targets are 1.091 and 1.241, respectively. Conclusions: A method for the characterizations of MEBXS using TG-43U1 dosimetric data using the MC MCNP4C has been presented. The effects of target geometry, thicknesses, and electron source geometry have been investigated. The final choices of MEBXS design are conical-hemisphere target shapes having an apex angle of 60 deg. Tungsten material having an optimized thickness versus electron energy and a 0.9 mm radius of uniform cylinder as a cathode produces optimal electron source characteristics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Toward a better understanding of the GRB phenomenon: A new model for GRB PROMPT emission and its effects on the new L{sub i}{sup NT}– E{sub peak,i}{sup rest,NT} relation

Gamma-ray burst (GRB) prompt emission spectra in the keV–MeV energy range are usually considered to be adequately fitted with the empirical Band function. Recent observations with the Fermi Gamma-ray Space Telescope (Fermi) revealed deviations from the Band function, sometimes in the form of an additional blackbody (BB) component, while on other occasions in the form of an additional power law (PL) component extending to high energies. In this article we investigate the possibility that the three components may be present simultaneously in the prompt emission spectra of two very bright GRBs (080916C and 090926A) observed with Fermi, and how the three components may affect the overall shape of the spectra. While the two GRBs are very different when fitted to a single Band function, they look like “twins” in the three-component scenario. Through fine-time spectroscopy down to the 100 ms timescale, we follow the evolution of the various components. We succeed in reducing the number of free parameters in the three-component model, which results in a new semi-empirical model—but with physical motivations—to be competitive with the Band function in terms of number of degrees of freedom. From this analysis using multiple components, the Band function is globally the most intense component, although the additional PL can overpower the others in sharp time structures. The Band function and the BB component are the most intense at early times and globally fade across the burst duration. The additional PL is the most intense component at late time and may be correlated with the extended high-energy emission observed thousands of seconds after the burst with Fermi/Large Area Telescope. Unexpectedly, this analysis also shows that the additional PL may be present from the very beginning of the burst, where it may even overpower the other components at low energy. We investigate the effect of the three components on the new time-resolved luminosity–hardness relation in both the observer and rest frames and show that a strong correlation exists between the flux of the non-thermal Band function and its E{sub peak} only when the three components are fitted simultaneously to the data (i.e., F{sub i}{sup NT}–E{sub peak,i}{sup NT} relation). In addition, this result points toward a universal relation between those two quantities when transposed to the central engine rest frame for all GRBs (i.e., L{sub i}{sup NT}–E{sub peak,i}{sup rest,NT} relation). We discuss a possible theoretical interpretation of the three spectral components within this new empirical model. We suggest that (i) the BB component may be interpreted as the photosphere emission of a magnetized relativistic outflow, (ii) the Band component has synchrotron radiation in an optically thin region above the photosphere, either from internal shocks or magnetic field dissipation, and (iii) the extra PL component extending to high energies likely has an inverse Compton origin of some sort, even though its extension to a much lower energy remains a mystery.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlating Particle Size and Shape of Supported Ru/gamma-Al2O3 Catalysts with NH3 Decomposition Activity

While ammonia synthesis and decomposition on Ru are known to be structure-sensitive reactions, the effect of particle shape on controlling the particle size giving maximum turnover frequency (TOF) is not understood. By controlling the catalyst pretreatment conditions, we have varied the particle size and shape of supported Ru/{gamma}-Al{sub 2}O{sub 3} catalysts. The Ru particle shape was reconstructed by combining microscopy, chemisorption, and extended X-ray absorption fine structure (EXAFS) techniques. We show that the particle shape can change from a round one, for smaller particles, to an elongated, flat one, for larger particles, with suitable pretreatment. Density functional theory calculations suggest that the calcination most likely leads to planar structures. We show for the first time that the number of active (here B{sub 5}) sites is highly dependent on particle shape and increases with particle size up to 7 nm for flat nanoparticles. The maximum TOF (based on total exposed Ru atoms) and number of active (B{sub 5}) sites occur at 7 nm for elongated nanoparticles compared to at {approx}1.8-3 nm for hemispherical nanoparticles. A complete, first-principles based microkinetic model is constructed that can quantitatively describe for the first time the effect of varying particle size and shape on Ru activity and provide further support of the characterization results. In very small nanoparticles, particle size polydispersity (due to the presence of larger particles) appears to be responsible for the observed activity.

36 MATERIALS SCIENCE↗

Bootstrap estimation of the effect of instrument response function uncertainty on the reconstruction of fusion neutron sources

Neutron imagers are important diagnostics for the inertial confinement fusion implosions at the National Ignition Facility. They provide two- and three-dimensional reconstructions of the neutron source shape that are key indicators of the overall performance. To interpret the shape results properly, it is critical to estimate the uncertainty in those reconstructions. There are two main sources of uncertainties: limited neutron statistics, leading to random errors in the reconstructed images, and incomplete knowledge of the instrument response function (the pinhole-dependent point spread function). While the statistical errors dominate the uncertainty for lower yield deuterium-tritium (DT) shots, errors due to the instrument response function dominate the uncertainty for DT yields on the order of 10 16 neutrons or higher. In this work, a bootstrapping method estimates the uncertainty in a reconstructed image due to the incomplete knowledge of the instrument response function. The main reconstruction is created from the fixed collection of pinhole images that are best aligned with the neutron source. Additional reconstructions are then built using subsets of that collection of images. Variations in the shapes of these additional reconstructions originate solely from uncertainties in the instrument response function, allowing us to use them to provide an additional systematic uncertainty estimate.

47 OTHER INSTRUMENTATION↗

Statistical spatial properties of speckle patterns generated by multiple laser beams

This paper investigates hot spot characteristics generated by the superposition of multiple laser beams. First, properties of speckle statistics are studied in the context of only one laser beam by computing the autocorrelation function. The case of multiple laser beams is then considered. In certain conditions, it is shown that speckles have an ellipsoidal shape. Analytical expressions of hot spot radii generated by multiple laser beams are derived and compared to numerical estimates made from the autocorrelation function. They are also compared to numerical simulations performed within the paraxial approximation. Excellent agreement is found for the speckle width as well as for the speckle length. Application to the speckle patterns generated in the Laser MegaJoule configuration in the zone where all the beams overlap is presented. Influence of polarization on the size of the speckles as well as on their abundance is studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the elastocaloric effect in CuAlBe shape memory alloys: A quantitative phase-field modeling approach

We report the reversible stress-induced phase transformation in shape memory alloys (SMAs) is a dissipative process during which heat is absorbed or released. The inherent temperature variations inside the material has an elastocaloric effect (eCE) with appealing applications in solid-state cooling technology such as compact and efficient on-board refrigeration system for eletronic devices. In this manuscript, we conduct the first study of eCE of CuAlBe SMAs utilizing phase-field modeling. For an applied stress of 500 MPa, the results for polycrystalline Cu-Al11-2Be (at. %) show a minimum adiabatic unloading temperature change of -10 K over a pseudoelastic window of 40 K. In the absence of plastic deformation, the material demonstrates good reproducibility of the eCE over a few loading–unloading cycles. The presence of plastic deformation is found to cause functional fatigue that deteriorates the cooling capacity; however, the coefficient of performance only decreases from 9.04 to 8.03, which is still a very good value. These results place CuAlBe as a frontrunner SMA for solid-state cooling compared to the expensive NiTi.

36 MATERIALS SCIENCE↗

Predicting the preferred morphology of hexagonal boron nitride domain structure on nickel from ReaxFF-based molecular dynamics simulations

An understanding of the nucleation and growth of hexagonal boron nitride (hBN) on nickel substrates is essential to its development as a functional material. In particular, fundamental insights into the formation of the hexagonal lattices with alternating boron (B) and nitrogen (N) atoms could be exploited to control hBN lattice morphologies for targeted applications. Here, the preferred shapes and edge configurations of atomically smooth hBN on Ni(111) were investigated using molecular dynamics (MD) simulations, along with reactive force field (ReaxFF) developed to represent the Ni/B/N system and the lattice-building B–N bond formation. The obtained hBN lattices, from different B : N feed ratios, are able to confirm that hBN domain geometries can indeed be tuned by varying thermodynamic parameters (i.e., chemical potentials of N and B) – a finding that has only been predicted using quantum mechanical theories. Here, we also showed that the nitrogen fed to the system plays a more crucial role in dictating the size of hBN lattices. With an increase of the relative N content, the simulated hBN domain shapes also transition from equilateral triangles to hexagons, again, consistent with the anticipation based on Density Functional Theory (DFT) calculations. Hence, a plausible approach to acquire a desired hBN nanostructure depends on careful control over the synthesis conditions, which now can benefit from reliable molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast and programmable locomotion of hydrogel-metal hybrids under light and magnetic fields

The design of soft matter in which internal fuels or an external energy input can generate locomotion and shape transformations observed in living organisms is a key challenge. Such materials could assist in productive functions that may range from robotics to smart management of chemical reactions and communication with cells. In this context, hydrated matter that can function in aqueous media would be of great interest. Here, we report the design of hydrogels containing a scaffold of high–aspect ratio ferromagnetic nanowires with nematic order dispersed in a polymer network that change shape in response to light and experience torques in rotating magnetic fields. The synergistic response enables fast walking motion of macroscopic objects in water on either flat or inclined surfaces and also guides delivery of cargo through rolling motion and light-driven shape changes. The theoretical description of the response to the external energy input allowed us to program specific trajectories of hydrogel objects that were verified experimentally.

36 MATERIALS SCIENCE↗

Structure of the particle-hole amplitudes in no-core shell model wave functions

We study the structure of the no-core shell model wave functions for {sup 6}Li and {sup 12}C by investigating the ground state and first excited state electron scattering charge form factors. In both nuclei, large particle-hole (ph) amplitudes in the wave functions appear with the opposite sign to that needed to reproduce the shape of the (e,e{sup '}) form factors, the charge radii, and the B(E2) values for the lowest two states. The difference in sign appears to arise mainly from the monopole DELTA(Planck constant/2pi)omega=2 matrix elements of the kinetic and potential energy (T+V) that transform under the harmonic oscillator SU(3) symmetries as (lambda,mu)=(2,0). These are difficult to determine self-consistently, but they have a strong effect on the structure of the low-lying states and on the giant monopole and quadrupole resonances. The Lee-Suzuki transformation, used to account for the restricted nature of the space in terms of an effective interaction, introduces large higher-order DELTA(Planck constant/2pi)omega=n,n>2, ph amplitudes in the wave functions. The latter ph excitations aggravate the disagreement between the experimental and predicted (e,e{sup '}) form factors with increasing model spaces, especially at high momentum transfers. For sufficiently large model spaces, the situation begins to resolve itself for {sup 6}Li, but the convergence is slow. A prescription to constrain the ph excitations would likely accelerate convergence of the calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-C-204-01: A Fast Analytical Approach for Prompt Gamma and PET Predictions in a TPS for Proton Range Verification

Purpose: We describe and demonstrate a fast analytical tool for prompt-gamma emission prediction based on filter functions applied on the depth dose profile. We present the implementation in a treatment planning system (TPS) of the same algorithm for positron emitter distributions. Methods: The prediction of the desired observable is based on the convolution of filter functions with the depth dose profile. For both prompt-gammas and positron emitters, the results of Monte Carlo simulations (MC) are compared with those of the analytical tool. For prompt-gamma emission from inelastic proton-induced reactions, homogeneous and inhomogeneous phantoms alongside with patient data are used as irradiation targets of mono-energetic proton pencil beams. The accuracy of the tool is assessed in terms of the shape of the analytically calculated depth profiles and their absolute yields, compared to MC. For the positron emitters, the method is implemented in a research RayStation TPS and compared to MC predictions. Digital phantoms and patient data are used and positron emitter spatial density distributions are analyzed. Results: Calculated prompt-gamma profiles agree with MC within 3 % in terms of absolute yield and reproduce the correct shape. Based on an arbitrary reference material and by means of 6 filter functions (one per chemical element), profiles in any other material composed of those elements can be predicted. The TPS implemented algorithm is accurate enough to enable, via the analytically calculated positron emitters profiles, detection of range differences between the TPS and MC with errors of the order of 1–2 mm. Conclusion: The proposed analytical method predicts prompt-gamma and positron emitter profiles which generally agree with the distributions obtained by a full MC. The implementation of the tool in a TPS shows that reliable profiles can be obtained directly from the dose calculated by the TPS, without the need of full MC simulation.

60 APPLIED LIFE SCIENCES↗

Euclidean Wilson loops and minimal area surfaces in lorentzian AdS 3

The AdS/CFT correspondence relates Wilson loops in N=4 SYM theory to minimal area surfaces in AdS 5 × S 5 space. If the Wilson loop is Euclidean and confined to a plane (t, x) then the dual surface is Euclidean and lives in Lorentzian AdS 3 c AdS 5 . In this paper we study such minimal area surfaces generalizing previous results obtained in the Euclidean case. Since the surfaces we consider have the topology of a disk, the holonomy of the flat current vanishes which is equivalent to the condition that a certain boundary Schrödinger equation has all its solutions anti-periodic. If the potential for that Schrödinger equation is found then reconstructing the surface and finding the area become simpler. In particular we write a formula for the Area in terms of the Schwarzian derivative of the contour. Finally an infinite parameter family of analytical solutions using Riemann Theta functions is described. In this case, both the area and the shape of the surface are given analytically and used to check the previous results.

't Hooft and Polyakov loops↗

Platinum nanoclusters encapsulated in amorphous carbon

Films of a nanocomposite based on Pt and amorphous carbon (a-C), including hydrogenated carbon (a-C:H), are studied. The nanocomposite was synthesized by encapsulation of Pt nanoclusters in amorphous carbon films via dc magnetron co-sputtering of graphite and platinum targets in an argon-hydrogen plasma. The content of platinum in the films was determined by the methods of Rutherford backscattering and instantaneous nuclear reactions. The morphology of nanocomposite films and separate Pt clusters was examined by transmission electron microscopy. It was shown that nanoclusters {approx}3 nm in size are crystals with well-formed low-defect crystal structure and that their shape in the plane is approximated well with an ellipse. Distribution functions for the eccentricity and average size were constructed for a set of 100 of the best discernible clusters. It was found that introduction of hydrogen into the plasma leads to a decrease in the average size of Pt nanoclusters for a constant ratio between the carbon and platinum concentrations in the nanocomposite.

36 MATERIALS SCIENCE↗

Microstructural Analysis of Powder Metallurgy Tool Steels in the Context of Abrasive Wear Behavior: A New Computerized Approach to Stereology

The present work describes a new methodology designed to characterize the microstructures of tool steels containing carbide hard phases, with the focus set on their abrasive wear resistance. A series of algorithms were designed and implemented in MATLAB® to (i) recognize each of the features of interest, (ii) measure relevant quantities and (iii) characterize each of the phases and the alloy in function of attributes usually neglected in wear description applications: size distribution, shape and contiguity of the hard phases. The new framework incorporates new parameters to describe each one of these attributes, as observed in SEM micrographs. All three aforementioned stages contain novel contributions that can be potentially beneficial to the field of materials design in general and to the field of alloy design for severely abrasive environments in particular. Models of known geometry and micrographs of different powder metallurgy steels were analyzed, and the obtained results were compared with the obtained by the linear intercept method. The relation between the new parameters and the ones available in the scientific literature is also discussed.

36 MATERIALS SCIENCE↗

On estimating the curvature attributes and strain invariants of deformed surface through radial basis functions

Numerical methods in approximation of derivatives on regular or irregular gridded and scattered data points are of significance in the study of numerous problems in engineering and geoscience. A mathematically accurate and stable method is assessed to compute the differential quantities, while being flexible and easy to implement. Strain-invariant parameters in deformation analysis and curvature attributes in geometrical analysis of approximated surfaces are independent quantities which could be derived numerically through radial basis functions (RBFs) for scattered data points. Approximation of a function or its derivatives through RBFs is highly correlated to its shape parameter which depends on the number and distribution of the particles on the support domain. A procedure to find the optimal shape parameter for RBFs in the influence domain of each nodal point together with the presentation of a manner of calculating the curvature attributes and strain parameters through Gaussian RBFs is proposed here. Results indicate a significant improvement in the approximation accuracy of strain parameters and curvature attributes, while this approximation is more stable when RBFs with optimal shape parameter are implemented rather than the traditional moving least squares.

97 MATHEMATICS AND COMPUTING↗