Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86

Structural, dielectric and magnetic studies of (x) Ni{sub 0.7}Co{sub 0.1}Cu{sub 0.2}Fe{sub 2}O{sub 4} + (1-x) BaTiO{sub 3} magnetoelectric composites

The Magneto-electric composites (x) Ni{sub 0.7}Co{sub 0.1}Cu{sub 0.2}Fe{sub 2}O{sub 4} + (1-x) BaTiO{sub 3} (x=10%, 20% and 30%) were synthesized by sintering mixtures of highly ferroelectric BaTiO{sub 3} (BT) and highly magneto-strictive component Ni{sub 0.7}Co{sub 0.1}Cu{sub 0.2}Fe{sub 2}O{sub 4} (NCCF). The presences of constituent phases in magneto-electric composites were probed by X-ray diffraction (XRD) studies. The peaks observed in the XRD spectrum indicated spinel cubic structure for NCCF ferrite phase and tetragonal perovskite structure for BT and, both spinel and pervoskite structures for synthesized ME composites. Surface morphology of the samples has been investigated using Field Emission Scanning Electron Microscope (FESEM). Frequency and composition dependent dielectric properties of synthesized composites were measured from 100 Hz to 1 MHz at room temperature using Hioki LCR Hi-TESTER. The dielectric dispersion is observed at lower frequencies for the synthesized ME composites. The hysteresis behavior was studied to understand the magnetic ordering in the synthesized composites using a Vibrating Sample Magnetometer (VSM). It is observed that the values of saturation magnetization increases along with the ferrite content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying dielectric mechanism and magnetization of double perovskite Gd{sub 2}NiMnO{sub 6} ceramic

In the present work, the structure, dielectric and magnetic properties of Gd{sub 2}NiMnO{sub 6} double perovskite have been studied. X-Ray diffraction study reveals the phase pure formation of the material that crystallizes into monoclinic phase (space group ’P2{sub 1}/n’). Surface morphology depicts heterogeneous grain distribution with average grain size of ~1 µm. Temperature dependent (50 – 330 K) dielectric measurements at different frequencies (0.5 - 50 kHz) relate to Maxwell-Wagner interfacial polarization model. Giant dielectric constant at 1 kHz for 300 K (ε’ ~1900) is noticed as compared to that of 50 K (ε’ ~10) coupled with a peak shift in tan loss towards higher temperature with frequency. The activation energy (0.24 eV) obtained using Arrhenius relation for thermally activated relaxor behavior of the material signifies an electron hopping mechanism between Ni{sup 2+} and Mn{sup 4+} cations. Lastly, M-H study shows ‘S’ shape hysteresis loop at 50 K with remnant magnetization (M{sub r}) of 0.72 µ{sub B}/f.u. along with a linear plot for 300 K which reveals paramagnetic nature of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of magneto-optic effect on Mn{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} nanoferrofluids

Mn{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} nanoparticles (with x varying as 0.1, 0.3, 0.5, 0.7 and 0.9) have been synthesized by co- precipitation method using polyvinyl alcohol as surfactant. Structural analysis and surface morphology of the samples were analysed using X-ray diffraction and scanning electron microscope respectively. The Scherer approximation was used to obtain crystallite sizes and found to decrease from 8.9 nm to 4.3 nm with increase in zinc substitution. The chemical composition of samples obtained through EDAX was comparable with the initial substitutions. Saturation magnetization (M{sub s}), Remanence (M{sub r}) and Coercivity (H{sub c}) were measured using VSM at room temperature and found to decrease with increase in zinc substitution. Verdet constant of the samples are obtained from Faraday rotation for various magnetic fields and it varies from 18 × 10{sup −4} to 3 × 10{sup −4}deg/Gcm with zinc substitution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth, structural, and magnetic properties of single-crystal full-Heusler Co 2 TiGe thin films

This paper presents the growth, structural characterization, and measurement of magnetic properties of Co 2 TiGe thin films grown by molecular beam epitaxy on insulating MgO (001) substrates and conductive lattice matched InAlAs/InGaAs/InAlAs epitaxial layers grown on n-InP (001) substrates. A GdAs diffusion barrier was used to minimize interfacial reactions during Co 2 TiGe growth on InAlAs. The surface morphology, structural quality, and magnetic behavior were examined by reflection high-energy electron diffraction, scanning tunneling microscopy, X-ray diffraction, and superconducting quantum interference device magnetometry. The results reveal high quality Co 2 TiGe thin films with a saturation magnetization of ~1.8 μ B /formula unit and a Curie temperature of ~375 K. Finally, the magnetic easy axis was found to lie in the [110] direction but magnetometry also reveals that there is only a small difference in energy between the [110] and [010] magnetization directions.

36 MATERIALS SCIENCE↗

Patterned growth of crystalline Y 3 Fe 5 O 12 nanostructures with engineered magnetic shape anisotropy

We demonstrate patterned growth of epitaxial yttrium iron garnet (YIG) thin films using lithographically defined templates on gadolinium gallium garnet substrates. The fabricated YIG nanostructures yield the desired crystallographic orientation, excellent surface morphology, and narrow ferromagnetic resonance (FMR) linewidth (~4 Oe). Shape-induced magnetic anisotropy is clearly observed in a patterned array of nanobars engineered to exhibit the larger coercivity (40 Oe) compared with that of continuous films. Both hysteresis loop and angle-dependent FMR spectra measurements indicate that the easy axis aligns along the longitudinal direction of the nanobars, with an effective anisotropy field of 195 Oe. Our work overcomes difficulties in patterning YIG thin films and provides an effective means to control their magnetic properties and magnetic bias conditions.

42 ENGINEERING↗

Measurement of sputtered beryllium yield and angular distribution during nanostructure growth in a helium plasma

Here, the angular distribution and sputtering yield of beryllium exposed to helium plasma are estimated from analysis of line-integrated 2D imaging of Be-I line emission in a steady-state linear plasma device. As the surface nanostructure forms during plasma exposure on a ~100 s timescale (corresponding to a fluence of order 10 20 /cm 2 ) from nearly mono-energetic ion bombardment, a narrowing of the beryllium sputtering angle and a significant (~5×) drop in sputtering yield are observed. Lastly, these trends are found to be qualitatively consistent with modeling taking into account the effect of the surface morphology on sputtering yield and angular distribution.

36 MATERIALS SCIENCE↗

Direct printing of metal contacts on 4H-SiC for radiation detection

Additive manufacturing (AM) has created the possibility of replacing traditional manufacturing techniques with faster, versatile and cost-effective production options. Here, we employed AM techniques to fabricate silicon carbide (SiC) radiation detectors based on commercial 4H-SiC wafers. Platinum (Pt) nanoparticle inks were synthesized and printed onto the surface of a 4H-SiC wafer using an aerosol jet printing technique to create Schottky diodes for radiation detection. The additive printed detectors were characterized for surface morphology through a scanning electron microscope (SEM) and atomic force microscope (AFM), and electronically by current-voltage (IV), capacitance-voltage (CV) and finally by alpha spectroscopy measurements. Lastly, the printed detector achieved an energy resolution of 3.24% FWHM at 5.486 MeV, compared to 0.62% FWHM of a SiC detector fabricated by conventional clean room technologies and 0.3% FWHM of a commercially available Si detector.

36 MATERIALS SCIENCE↗

Monitoring the growth dynamics of colloidal gold-silver core-shell nanoparticles using in situ second harmonic generation and extinction spectroscopy

The growth dynamics of gold-silver core-shell (Au@Ag) nanoparticles are studied using in situ time-dependent second harmonic generation (SHG) and extinction spectroscopy to investigate the nanoparticle shell formation. The silver shell is grown by reduction of silver cations onto a 14 nm gold core using ascorbic acid in colloidal aqueous solution under varying reaction concentrations producing Au@Ag nanoparticles of final sizes ranging from 51 to 78 nm in diameter. The in situ extinction spectra show a rapid increase in intensity on the timescale of 5–6 s with blue shifting and narrowing of the plasmonic peak during the silver shell formation. The in situ SHG signals show an abrupt rise at early times of the reaction, followed by a time-dependent biexponential decrease, where the faster SHG lifetime corresponds to the timescale of the shell growth, and where the slower SHG lifetime is attributed to changes in the nanoparticle surface charge density. A large enhancement in the SHG signal at early stages of the reaction is caused by plasmonic hot spots due to the nanoparticle surface morphology, which becomes smoother as the reaction proceeds. The final extinction spectra are compared to finite-difference time-domain (FDTD) calculations, showing general agreement with experiment, where the plasmon peak red shifts and increases in spectral width as the silver shell thickness increases. These in situ SHG and extinction spectroscopy results, combined with FDTD calculations, help characterize the complicated processes involved in colloidal nanoparticle shell formation in real time for developing potential plasmon-enhanced nanomaterial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial stabilization of ultra thin films of high entropy perovskite

High entropy oxides (HEOs) are a class of materials, containing equimolar portions of five or more transition metal and/or rare-earth elements. We report here about the layer-by-layer growth of HEO [(La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 ] thin films on NdGaO 3 substrates by pulsed laser deposition. The combined characterizations with in situ reflection high energy electron diffraction, atomic force microscopy, and x-ray diffraction affirm the single crystalline nature of the film with smooth surface morphology. The desired +3 oxidation of Ni has been confirmed by an element sensitive x-ray absorption spectroscopy measurement. Temperature dependent electrical transport measurements revealed a first order metal-insulator transition with the transition temperature very similar to the undoped NdNiO 3 . Furthermore, since both these systems have a comparable tolerance factor, this work demonstrates that the electronic behaviors of A-site disordered perovskite-HEOs are primarily controlled by the average tolerance factor.

36 MATERIALS SCIENCE↗

Influence of substrate misorientation on the optical properties of Mg-doped GaN

The GaN substrate miscut angle has a significant effect on the optical properties of Mg-doped GaN grown by metal-organic chemical vapor deposition. We have studied the optical properties of epilayers grown on c-plane GaN wafers with nominal miscut angles of 0.3° and 4° toward the [11¯00] direction. Periodic surface steps are observed in thin films grown on 0.3° miscut substrates. The step separation and height, as well as the surface roughness, increase with layer thickness, leading to a decrease in Mg doping efficiency. For films grown on 4° miscut substrates, step bunching causes the formation of visually observable wavy features on the film surface with strong spatial variations in cathodoluminescence characteristics, indicating a significant effect of surface morphology on the nature of Mg incorporation and p-type characteristics.

Liu, Hanxiao (ORCID:0000000331067542)↗

Minority carrier lifetime and photoluminescence of mid-wave infrared InAsSbBi

Time-resolved photoluminescence measurements are reported for InAsSbBi alloys grown by molecular beam epitaxy with Bi mole fractions ranging from 0 to 0.8%, yielding minority carrier lifetimes on the order of hundreds of nanoseconds. The minority carrier lifetimes extracted from the time-resolved photoluminescence measurements are comparable to those of lattice-matched InAsSb grown at the same respective temperatures. Nomarski imaging shows that smooth, droplet-free surface morphologies are obtained in 1 μm thick InAsSbBi epilayers grown at temperatures between 360 and 380 °C. The alloy composition-dependent bandgap energies for the InAsSbBi samples are determined from temperature-dependent steady-state photoluminescence measurements and compared with the tetragonal distortion measured by x-ray diffraction to determine the Sb and Bi mole fractions of each sample. The minority carrier lifetime and the achievable extension of the InAsSb(Bi) cut-off wavelength are analyzed as functions of alloy composition and compared with the performance of InAsSb layers with similar growth parameters.

Petluru, Priyanka (ORCID:0000000257154284)↗

Thermal and radiation response of 4H–SiC Schottky diodes with direct-write electrical contacts

In this work, a high-sensitivity 4H–SiC temperature sensor and an alpha detector have been fabricated using additively printed metal contacts. The surface morphology and electrical conductivity of the printed electrodes were established prior to Schottky diode development. 4H–SiC Schottky diodes with direct-write printed silver contacts on the 5 μ m-thick epilayer on 4H–SiC were characterized electrically in terms of the forward and reverse current–voltage and high-frequency capacitance–voltage characteristics. Furthermore, the turn-on voltage of the Schottky diodes, as established from the forward current–voltage characteristics measured up to a temperature of 400 °C, showed a linear temperature dependence. Schottky diodes with direct-write printed Ag electrodes were able to measure alpha particles emitted from Americium-241. The high temperature and radiation response of the Schottky diodes show their suitability for multi-modal sensor fusion on the 4H–SiC platform for harsh environment applications.

42 ENGINEERING↗

Comparison of water nanodroplet properties on different graphite-based substrates

The molecular structure and dynamics of water differ considerably at various interfaces. We compare the interfacial water structure–property relationship on three different carbon substrates, namely, amorphous carbon, compressed expanded natural graphite, and pure graphite by utilizing atomistic molecular dynamics simulations. The effect of different substrates on the structural and dynamical properties of water can readily be observed. Here, the density distributions parallel and normal to the substrates show oblate droplet structures. The normal to the substrate water distribution shows a strong hydration layer at the interface that does not vary with substrates. However, the disparity in the structure and dynamics on three different substrates shows that the surface morphologies of the substrates are critical for determining nanoscale water properties. Furthermore, it is observed that the formation of an interfacial water layer or the hydration layer is a direct consequence of both water “confinement” at the nanoscale and “attraction” between water molecules and the carbon substrates.

42 ENGINEERING↗

Photoemission characterization of N-polar III-nitride photocathodes as candidate bright electron beam sources for accelerator applications

We report on the growth and characterization of a new class of photocathode structures for use as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-nitride materials and are designed to leverage the strong polarization field, which is characteristic of this class of materials when grown in their wurtzite crystal structure, to produce a negative electron affinity condition without the use of Cs, possibly allowing these materials to be operated in radio frequency guns. A Quantum Efficiency (QE) of about 1×10−3 and an emitted electrons’ Mean Transverse Energy (MTE) of about 100 meV are measured at a wavelength of 265 nm. In a vacuum level of 3×10−10 Torr, the QE does not decrease after more than 24 h of continuous operation. The lowest MTE of about 50 meV is measured at 300 nm along with a QE of 1.5×10−5. Surface characterizations reveal a possible contribution to the MTE from surface morphology, calling for more detailed studies.

Cultrera, L. (ORCID:0000000235606059)↗

Molecular beam homoepitaxy of N-polar AlN on bulk AlN substrates

N-polar AlN epilayers were grown on the N-face of single-crystal bulk AlN substrates by plasma-assisted molecular beam epitaxy. A combination of in situ thermal deoxidation and Al-assisted thermal desorption at high temperature aided in removing native surface oxides and impurities from the N-polar surface of the substrate enabling successful homoepitaxy. Subsequent epitaxial growth of the AlN layer on the in situ cleaned substrates, grown in a sufficiently high Al droplet regime, exhibited smooth surface morphologies with clean and wide atomic steps. KOH etch studies confirmed the N-polarity of the homoepitaxial films. Secondary ion mass spectrometry profiles show Si and H impurity concentrations below the noise levels, whereas O and C impurity concentrations of [Formula: see text] and [Formula: see text] atoms/cm 3 are observed, respectively. Although the structural defect densities are low, they interestingly appear as inversion domains of different dimensionalities.

Singhal, Jashan↗

Elimination of remnant phases in low-temperature growth of wurtzite ScAlN by molecular-beam epitaxy

We report growth of wurtzite Sc x Al 1-x N (x < 0.23) by plasma-assisted molecular-beam epitaxy on c-plane GaN at high temperatures significantly alters the extracted lattice constants of the material due to defects likely associated with remnant phases. In contrast, ScAlN grown below a composition-dependent threshold temperature exhibits uniform alloy distribution, reduced defect density, and atomic-step surface morphology. The c-plane lattice constant of this low-temperature ScAlN varies with composition as expected from previous theoretical calculations and can be used to reliably estimate alloy composition. Moreover, lattice-matched Sc 0.18 Al0 .82 N/GaN multi-quantum wells grown under these conditions display strong and narrow near-infrared intersubband absorption lines that confirm advantageous optical and electronic properties.

36 MATERIALS SCIENCE↗

Investigations of room temperature multiferroic and magneto-electric properties of (1-Φ) PZTFT-Φ CZFMO particulate composites

Multiferroic composites consisting of a single-phase multiferroic [0.6(PbZr 0.53 Ti 0.47 O 3 )-0.4(PbFe 0.5 Ta 0.5 )O 3 ] as a matrix and a magnetostrictive phase (Co 0.6 Zn 0.4 Fe 1.7 Mn 0.3 O 4 ) dispersed in the matrix are fabricated via hybrid synthesis technique. The structure and surface morphology studies using x-ray diffraction and field emission scanning electron microscopy techniques indicate the formation of 3-0 type particulate composites. Coexistence of soft-magnetic behavior and ferroelectric characteristics are confirmed for composites from magnetization vs magnetic field (M–H) and polarization vs electric field (P–E) measurements, respectively. Magneto-dielectric (MD) measurement shows significant changes in the dielectric properties with the application of a magnetic field, indicating the existence of strong MD behavior. The biquadratic nature of magneto-electric (ME) coupling is described by the Landau free energy equation arising from the strain transfer at the interfaces between the constituent phases. The direct magneto-electric voltage coefficient measurement also confirms very strong coupling between ferroelectricity and magnetism and supports the strain-mediated magneto-electric effect in composites. The Φ = 0.3 composite exhibits the maximum ME coefficient of 20.72 mV/cm Oe with M S = 24.62 emu/g, H C = 59.66 Oe, and piezoelectric coefficient value d 33 = 19 pC/N. In conclusion, the strong magneto-electric effect along with low dielectric loss at room temperature in these composites suggests their suitability for multifunctional magneto-electric device applications such as magnetic sensors, etc.

36 MATERIALS SCIENCE↗

Fabrication of single-crystalline YFeO3 films with large antiferromagnetic domains

The antiferromagnetic orthoferrite YFeO3 possesses fascinating magnetic properties for spintronics, such as terahertz spin dynamics, ultrafast domain wall motion, and long magnon decay length. YFeO3 belongs to a special family of antiferromagnets that show an unusually strong non-trivial Kerr response due to its weak ferromagnetism. The highly stable antiferromagnetic domains without any spontaneous spin rotation transitions below the 645 K Néel temperature may be useful for nanoscale device applications. We report the successful fabrication of high-quality twinning-free (110)-oriented YFeO3 films by pulsed laser deposition. Detailed structural and magnetic characterization revealed that the crystal structure and magnetic properties of the YFeO3 films are comparable to bulk single crystals. We show that the spin rotation under high magnetic fields follows the two-sublattice approximation model. The film surface is atomically flat with step-terrace surface morphology. A longitudinal magneto-optic Kerr (MOKE) rotation of 10 mdeg was observed at room temperature, which is consistent with earlier reports on bulk single crystals. The in-plane anisotropy of the Kerr response corresponds to the obtained magnetic anisotropy from the SQUID measurement. The large MOKE signal enables the imaging of antiferromagnetic domains and their reversal. The domain size was found to be larger than 100 μm. These high-quality YFeO3 thin films facilitate the fabrication of antiferromagnetic spintronic devices and provide a convenient platform for studying various spin-related phenomena in thin films and at interfaces.

Physics↗