Search NASA⌕ Search

SEARCH · Search NASA

Results for “Azimuth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Numerical Studies of Hall Thruster Acceleration Region Electron Transport

Azimuthal direction 1-D and azimuthal and axial direction 2-D Particle in Cell (PIC) simulations of the Hall thruster acceleration and near-plume regions are presented. The axial extent of the 2-D computational domain is based on the ExB drift parameter, 𝑫𝑬𝒙𝑩, the number of times around the channel an electron ExB drifts before being scattered. With only high energy main beam ions, the simulations produced a broad potential profile in the acceleration region. The addition of a small amount of ionization in the acceleration domain at a rate consistent with Hall thruster parameters causes the potential profile to develop two distinct regions. In the upstream portion of the computational domain, the potential profile is very steep, typical of Hall thruster acceleration regions. In the downstream portion, the potential profile is almost flat, like potentials in Hall thruster near plume regions. This bifurcation happens naturally; there is no other change in code parameters between the two results. Without the addition of a small amount of ionization in the acceleration region, the axial electron transport is very low. With ionization, the calculated ratio of electron current to ion current is the same order of those measured in Hall thrusters. This suggests that in regions with lower energy electrons and ions, plasma waves are effective in allowing crossfield transport, and axial electric fields are small. In the acceleration region, the plasma waves are less effective at scattering the energetic electrons, and high axial electric fields are needed to produce the observed cross-field electron transport.

Ortega, Alejandro Lopez↗

Expedited Model Building Method for Rocket Nozzle Side Loading

Statistical analysis of test data is currently the preferred method of creating models for uncharacterized side loading in rocket nozzles. However, statistical analysis requires multiple data sets to be reliable; getting these sets requires building and testing multiple rocket motors, which is not feasible given the incredible time and cost required to do so. By using a combination of geometry, simplified finite element analysis (FEA) analogs, and algebra we can create a limited predictive model from only one test data set. Once created, the model requires only the input from one strain gauge located at each yaw and pitch attachment bracket for the actuation system. This process is not computationally intensive, therefore saving an abundance of time and budget over using full 3D FEA models to develop a similar predictive model. To develop the model, conversion factors between the strain at the gauge locations and corresponding actuator load is derived from the data. These conversion factors are used to create a “conversion ellipse” that bounds the constitutive properties of the nozzle as one lumped factor. Using a 2D cross-sectional analog of the nozzle exit plane, we create a function that allows us to determine the azimuthal location of the unexpected load based on the ratio between yaw and pitch strain readings. Combining this with the “conversion ellipse” yields a function that given the strain reading outputs an induced actuator load, regardless of the azimuthal location of the unexpected load. As previously mentioned, this predictive model is limited in its application as there is inaccuracy introduced by the use of data by only one test as well as simplifying assumptions. This approach makes a useful tool to quickly determine whether uncharacterized actuator loading events can damage actuation systems or induce loading that exceeds design limits.

Seetha A Kolli↗

East–West Proton Flux Anisotropy Observed with the PAMELA Mission

We present a study of the east–west anisotropy of trapped-proton fluxes in low-Earth orbit based on the measurements of the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics(PAMELA)experiment. The differential intensities of eastward- and westward-traveling protons detected in the South Atlantic Anomaly region were estimated as a function of equatorial pitch angle and drift shell, for six energy bins between80 MeV and 2 GeV. We found that, as a consequence of the strong atmospheric gradient coupled with the large gyro radius in this energy range, the intensities of eastward fluxes exceed those of westward fluxes by a factor of∼10–20. However, the reported directional asymmetry also depends on the sign of the local flux gradient, resulting in more intense westward fluxes beyond the radial distances where the inner belt peaks. PAMELA observations can be used to improve the description of the near-Earth radiation environment at lowest altitudes and highest trapping energies, where current theoretical and empirical models are affected by the largest uncertainties. Unified Astronomy Thesaurus concepts: Cosmic rays(329);Van Allen radiation belts(1758)1. Introduction Low-altitude inner-belt protons are strongly influenced by the density distribution of Earth’s atmosphere, mostly through interactions with its neutral constituents, which induce significant flux anisotropies. In prim is, the atmospheric loss cone results in a steep pitch-angle distribution, which becomes narrower for lower drift shells. A further, azimuthal anisotropy originates from finite gyro radius effects at proton energies in excess of a few tens of MeV(Haerendel1962; Lenchek & Singer1962). In fact, for a given spacecraft position, protons with the same pitch angle but different gyro phase—the azimuth angle associated with the gyration motion—have their guiding centers on different drift shells. In particular, protons from the west and from the east gyrate around magnetic field lines located at higher and lower altitudes, respectively. The guiding-center separationΔhincreaseswith increasing energy, so that protons moving eastward will encounter progressively lower drift-averaged densities, thus experiencing less atmospheric absorption; the opposite situation will occur for protons traveling westward, resulting in an east–west asymmetry of flux intensities whenΔhbecomes comparable to or larger than the flux scale height(Garmire1963; Heckman &Nakano1963).The trapped-flux anisotropy is a relevant aspect of the modeling of the low Earth orbit(LEO)radiation environment, given the significant engineering implications, especially for The Astrophysical Journal,919:114(6pp), 2021 October 1https://doi.org/10.3847/1538-4357/ac1677© 2021. The American Astronomical Society.

A. Bruno↗

The Asymmetric Inner Disk of the Herbig Ae Star HD 163296 in the Eyes of VLTI/MATISSE: Evidence for a Vortex?

Context.A complex environment exists in the inner few astronomical units of planet-forming disks. High-angular-resolution observa-tions play a key role in our understanding of the disk structure and the dynamical processes at work.Aims.In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-massstar HD 163296 from early VLTI/MATISSE observations taken in theL- andN-bands. We put special emphasis on the detection ofpotential disk asymmetries.Methods.We use simple geometric models to fit the interferometric visibilities and closure phases. Our models include a smoothedring, a flat disk with an inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetriesas well. We also perform numerical hydrodynamical simulations of the inner edge of the disk.Results.Our modeling reveals a significant brightness asymmetry in theL-band disk emission. The brightness maximum of the asym-metry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio inthe azimuthal variation is3.5±0.2. Comparing our result on the location of the asymmetry with other interferometric measurements,we confirm that the morphology of ther<0.3au disk region is time-variable. We propose that this asymmetric structure, located in ornear the inner rim of the dusty disk, orbits the star. To find the physical origin of the asymmetry, we tested a hypothesis where a vortexis created by Rossby wave instability, and we find that a unique large-scale vortex may be compatible with our data. The half-lightradius of theL-band-emitting region is0.33±0.01au, the inclination is52◦+5◦−7◦, and the position angle is143◦±3◦. Our models predictthat a non-negligible fraction of theL-band disk emission originates inside the dust sublimation radius forμm-sized grains. Refractorygrains or large (&10μm-sized) grains could be the origin of this emission.N-band observations may also support a lack of smallsilicate grains in the innermost disk (r.0.6au), in agreement with our findings fromL-band data.

J Varga↗

Unsteady Surface Pressures on the Space Launch System Block 1B Cargo Liftoff Configuration

A 1.75%-scale model of the NASA Space Launch System Block 1B Cargo vehicle was tested at the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. These experiments provided a test bed for validating unsteady surface pressure measurements acquired via lengths of pressure tubing and an ESP pressure scanner. Pressure was measured using an azimuthal array of pressure taps located on the nose of the Block 1B Cargo vehicle. Unique flow physics were observed in the wind tunnel test, especially the interaction between the launch vehicle and the support tower, which produced strong oscillations that were absent in the vehicle-alone configuration. It is suspected that a wake interaction produced resonant flow response when the tower is immediately downstream of the vehicle, and coherent pressure fluctuations were observed at all pressure taps in the azimuthal array.

Lee J Mears↗

Implicit Large-Eddy Simulation of Axisymmetric and Asymmetric Turbulent Shock Wave Boundary Layer Interaction at Mach 2.5

High-speed inlet flows feature turbulent shock wave boundary layer interactions at supersonic Mach numbers. A canonical Mach 2.5 shock wave boundary layer interaction experiment at the NASA Glenn Research Center was designed for axisymmetric and asymmetric interactions depending on the placement of the shock generator. Four different wall-resolved implicit large-eddy simulations of the experiment were carried out at one-tenth of the Reynolds number of the experiment: (1) Two axisymmetric interactions with shock generator radii of 9.2% and 14.7% of the test section diameter and (2) two asymmetric interactions with 14.7% shock generator radius and shock generator centerline offsets of one-third and one-fourth of the test section radius. For the two axisymmetric interactions, various sub-domains upstream of the interaction, within the interaction, and downstream of the interaction were analyzed with the proper orthogonal decomposition. For all three regions, the dominant modes are streamwise coherent structures with Strouhal numbers based on separation length of 0.15 and below. Fourier spectra of the wall-pressure coefficient for the interaction region have peaks at Strouhal numbers based on separation length of 0.15 and 0.04. For the two asymmetric interactions, the streamwise extent of the separation varies considerably in the azimuthal direction. For both shock generator offsets, the interaction is strongest for the azimuthal location that is closest to the shock generator. Compared to the axisymmetric interaction, the streamwise extent of the separated flow region is noticeably reduced and a substantial crossflow is observed. Fourier analyses of the unsteady flow indicate low-frequency content f or the upstream part of the interaction which is more two-dimensional. Away from the upstream region, with increasing sweep angle and crossflow, the low-frequency content is diminished.

Computational Fluid Dynamics↗

High-Propellant Throughput Sub-kW Electric Propulsion System for Deep Space Science and Exploration

The National Aeronautics and Space Administration (NASA) is maturing high-propellant throughput sub-kilowatt electric propulsion technologies to enable small spacecraft deep space science and exploration missions with high delta-v requirements. The pathfinder model (PM) propulsion system consists of the H71M-PM Hall-effect thruster, a breadboard 1-kW power processing unit (PPU), and a propellant flow control system. The propulsion system requirements balance the needs of various high delta-v NASA and commercial industry mission concepts to achieve a design that both enables a variety of NASA small spacecraft deep space missions, while remaining viable for select commercial applications. The H71M-PM thruster has completed performance characterization and three 500-h short duration wear tests (SDWT). The propulsion system provides stable thrust generation over a wide range of operating conditions from 200 W to 1 kW, and 200 V to 400 V. The thruster has demonstrated a thrust as high as 68 mN at 300 V and 1 kW. The thruster has similarly demonstrated a specific impulse of 1850 s at 400 V and 1 kW. Key surfaces were machined between each SDWT to simulate accelerated discharge channel and pole cover erosion. Profilometry scans across masked pole cover surfaces were conducted to determine erosion rates. SDWT results support that a target thruster lifetime of 14 kh with 50% margin is achievable. Component testing has demonstrated propellant azimuthal flow uniformity better than ± 2 percent of the nominal value, azimuthal magnetic field uniformity better than ± 0.5 percent of the nominal value, and cathode heater cycle testing to greater than 30,000 cycles. Propulsion system integrated system testing is planned to use the H71M-PM and a breadboard 1-kW PPU. Pathfinder model test results are now supporting the design of the H71M-EM engineering model thruster. A second-generation breadboard PPU has been fabricated and is currently under test. NASA has made these technologies available to U.S. industry through a no cost, nonexclusive license agreement.

Hall↗

Characteristics of Multi-scale Current Sheets in the Solar Wind at 1 au Associated with Magnetic Reconnection and the Case for a Heliospheric Current Sheet Avalanche

Wind spacecraft measurements are analyzed to obtain a current sheet (CS) normal width dcs-distribution of 3374 confirmed magnetic reconnection exhausts in the ecliptic plane of the solar wind at 1 AU. The dcs-distribution displays a nearly exponential decay from a peak at dcs=25 di to a median at dcs=85 di and a 95th percentile at dcs=905 di with a maximum exhaust width at dcs=8077 di. A magnetic field ϴ-rotation angle distribution increases linearly from a relatively few high-shear events toward a broad peak at 35o<ϴ<65o. The azimuthal φ-angles of the CS normal directions of 430 thick dcs≥500 di exhausts are consistent with a dominant Parker-spiral magnetic field and a CS normal along the ortho-Parker direction. The CS normal orientations of 370 kinetic-scale dcs<25 di exhausts are isotropic in contrast, and likely associated with Alfvénic solar wind turbulence. We propose that the alignment of exhaust normal directions from narrow dcs~15-25 di widths to well beyond dcs~500 di with an ortho-Parker azimuthal direction of a large-scale HCS is a consequence of CS bifurcation and turbulence within the HCS exhaust that may trigger reconnection of the adjacent pair of bifurcated CSs. The proposed HCS-31 avalanche scenario suggests that the underlying large-scale parent HCS closer to the Sun evolves with heliocentric distance to fracture into many, more or less aligned, secondary current sheets due to reconnection. A few wide exhaust-associated HCS-like CSs could represent a population of HCSs that failed to reconnect as frequently between the Sun and 1 AU as other HCSs.

Stefan Eriksson↗

Ground-Based Vision Tracker for Advanced Air Mobility and Urban Air Mobility

Advanced Air Mobility (AAM) Air Mobility and Urban Air Mobility (UAM) require aircraft surveillance and monitoring for safety and security. Persistent tracking of flying objects provides Air Traffic Control (ATC) and Air Traffic Management (ATM) continuous coverage and knowledge of the national airspace (NAS). Since there are numerous more AAM and UAM aircraft than commercial aircraft, it will be challenging to utilize the same ATC/ATM architectures. A first step in creating a similar ATC/ATM architecture for AAM/UAM will require ground-based and airborne-based sensors to provide monitoring, which will be difficult in urban environments due to GPS degradation. This paper proposes a vision-based tracking method with static cameras by utilizing image subtraction and blob detection, which avoids adding additional electromagnetic interferences in the environment with sensors such as radar. The ground-based vision tracker (GBVT) outputs the detected objects' azimuth and elevation angles from unmanned aerial system (UAS) flight tests. Future and ongoing work includes sending the detected objects' azimuth and elevation angles as inputs for an extended Kalman filter (EKF) to estimate the position and velocity of the detected object.

distributed sensing↗

Assessment of Off-Design Low-Boom Characteristics of a Low-Boom Supersonic Transport

Most conceptual design methods for low-boom supersonic aircraft are developed for achieving an undertrack low-boom goal at the start of cruise. Although attempts have been made to design a supersonic aircraft achieving a low-boom goal for multiple azimuthal angles at the start of cruise, one unanswered question in inverse design optimization is how to define an achievable low-boom goal for multiple azimuthal angles. This paper proposes a new analysis method to assess off-design low-boom characteristics of a low-boom supersonic transport designed for an undertrack low-boom goal at the start of cruise. This method opens a potentially feasible path for conceptual design of a supersonic aircraft that has desired low-boom characteristics over the primary boom carpet for the entire cruise segment.

Low-boom supersonic transport↗

Ground-Based Vision Tracker for Advanced Air Mobility and Urban Air Mobility

Advanced Air Mobility (AAM) Air Mobility and Urban Air Mobility (UAM) require aircraft surveillance and monitoring for safety and security. Persistent tracking of flying objects provides Air Traffic Control (ATC) and Air Traffic Management (ATM) continuous coverage and knowledge of the national airspace system (NAS). Given the significant disparity in the number of AAM and UAM aircraft compared to commercial aircraft in the NAS, coupled with the dense AAM/UAM operations in urban environments, employing the existing ATC/ATM architectures poses considerable challenges. A first step in creating a similar ATC/ATM architecture for AAM/UAM will require ground-based and airborne-based sensors to provide monitoring, which will be difficult in urban environments due to GPS degradation. This paper proposes a vision-based tracking method with static cameras by utilizing image subtraction and blob detection, which avoids adding additional electromagnetic interferences in the environment with sensors such as radar. The ground-based vision tracker (GBVT) outputs the detected objects' azimuth and elevation angles from unmanned aerial system (UAS) flight tests. Future and ongoing work includes sending the detected objects' azimuth and elevation angles as inputs for an extended Kalman filter (EKF) to estimate the position and velocity of the detected object.

distributed sensing↗

Assessment of Off-Design Low-Boom Characteristics of a Low-Boom Supersonic Transport

Most design methods for a low-boom supersonic aircraft were developed for achieving an undertrack low-boom goal at the start of cruise. Attempts were made to design a supersonic aircraft achieving a low-boom goal for multiple azimuthal angles at the start of cruise. One unanswered question is how to define an achievable low-boom goal for multiple azimuthal angles at the start of cruise. This paper proposes a new analysis method to assess off-design low-boom characteristics of a low-boom supersonic transport designed for an undertrack low-boom goal at the start of cruise. This method opens a potentially feasible path for designing a supersonic aircraft that has the desired low-boom characteristics over the primary boom carpet for the entire cruise segment.

Low-boom supersonic transport↗

A global 3D P-velocity model of the Earth's crust and mantle for improved event location.

To test the hypothesis that high quality 3D Earth models will produce seismic event locations which are more accurate and more precise, we are developing a global 3D P wave velocity model of the Earth's crust and mantle using seismic tomography. In this paper, we present the most recent version of our model, SALSA3D (SAndia LoS Alamos) version 1.4, and demonstrate its ability to reduce mislocations for a large set of realizations derived from a carefully chosen set of globally-distributed ground truth events. Our model is derived from the latest version of the Ground Truth (GT) catalog of P and Pn travel time picks assembled by Los Alamos National Laboratory. To prevent over-weighting due to ray path redundancy and to reduce the computational burden, we cluster rays to produce representative rays. Reduction in the total number of ray paths is > 55%. The model is represented using the triangular tessellation system described by Ballard et al. (2009), which incorporates variable resolution in both the geographic and radial dimensions. For our starting model, we use a simplified two layer crustal model derived from the Crust 2.0 model over a uniform AK135 mantle. Sufficient damping is used to reduce velocity adjustments so that ray path changes between iterations are small. We obtain proper model smoothness by using progressive grid refinement, refining the grid only around areas with significant velocity changes from the starting model. At each grid refinement level except the last one we limit the number of iterations to prevent convergence thereby preserving aspects of broad features resolved at coarser resolutions. Our approach produces a smooth, multi-resolution model with node density appropriate to both ray coverage and the velocity gradients required by the data. This scheme is computationally expensive, so we use a distributed computing framework based on the Java Parallel Processing Framework, providing us with {approx}400 processors. Resolution of our model is assessed using a variation of the standard checkerboard method, as well as by directly estimating the diagonal of the model resolution matrix based on the technique developed by Bekas, et al. We compare the travel-time prediction and location capabilities of this model over standard 1D models. We perform location tests on a global, geographically-distributed event set with ground truth levels of 5 km or better. These events generally possess hundreds of Pn and P phases from which we can generate different realizations of station distributions, yielding a range of azimuthal coverage and proportions of teleseismic to regional arrivals, with which we test the robustness and quality of relocation. The SALSA3D model reduces mislocation over standard 1D ak135, especially with increasing azimuthal gap. The 3D model appears to perform better for locations based solely or dominantly on regional arrivals, which is not unexpected given that ak135 represents a global average and cannot therefore capture local and regional variations.

99 GENERAL AND MISCELLANEOUS↗

A global 3D P-Velocity model of the Earth%3CU%2B2019%3Es crust and mantle for improved event location.

To test the hypothesis that high quality 3D Earth models will produce seismic event locations which are more accurate and more precise, we are developing a global 3D P wave velocity model of the Earth's crust and mantle using seismic tomography. In this paper, we present the most recent version of our model, SALSA3D (SAndia LoS Alamos) version 1.4, and demonstrate its ability to reduce mislocations for a large set of realizations derived from a carefully chosen set of globally-distributed ground truth events. Our model is derived from the latest version of the Ground Truth (GT) catalog of P and Pn travel time picks assembled by Los Alamos National Laboratory. To prevent over-weighting due to ray path redundancy and to reduce the computational burden, we cluster rays to produce representative rays. Reduction in the total number of ray paths is > 55%. The model is represented using the triangular tessellation system described by Ballard et al. (2009), which incorporates variable resolution in both the geographic and radial dimensions. For our starting model, we use a simplified two layer crustal model derived from the Crust 2.0 model over a uniform AK135 mantle. Sufficient damping is used to reduce velocity adjustments so that ray path changes between iterations are small. We obtain proper model smoothness by using progressive grid refinement, refining the grid only around areas with significant velocity changes from the starting model. At each grid refinement level except the last one we limit the number of iterations to prevent convergence thereby preserving aspects of broad features resolved at coarser resolutions. Our approach produces a smooth, multi-resolution model with node density appropriate to both ray coverage and the velocity gradients required by the data. This scheme is computationally expensive, so we use a distributed computing framework based on the Java Parallel Processing Framework, providing us with {approx}400 processors. Resolution of our model is assessed using a variation of the standard checkerboard method, as well as by directly estimating the diagonal of the model resolution matrix based on the technique developed by Bekas, et al. We compare the travel-time prediction and location capabilities of this model over standard 1D models. We perform location tests on a global, geographically-distributed event set with ground truth levels of 5 km or better. These events generally possess hundreds of Pn and P phases from which we can generate different realizations of station distributions, yielding a range of azimuthal coverage and proportions of teleseismic to regional arrivals, with which we test the robustness and quality of relocation. The SALSA3D model reduces mislocation over standard 1D ak135, especially with increasing azimuthal gap. The 3D model appears to perform better for locations based solely or dominantly on regional arrivals, which is not unexpected given that ak135 represents a global average and cannot therefore capture local and regional variations.

99 GENERAL AND MISCELLANEOUS↗

Apparatus and method for mapping an area of interest

An apparatus and method are provided for mapping an area of interest using polar coordinates or Cartesian coordinates. The apparatus includes a range finder, an azimuth angle measuring device to provide a heading and an inclinometer to provide an angle of inclination of the range finder as it relates to primary reference points and points of interest. A computer is provided to receive signals from the range finder, inclinometer and azimuth angle measurer to record location data and calculate relative locations between one or more points of interest and one or more primary reference points. The method includes mapping of an area of interest to locate points of interest relative to one or more primary reference points and to store the information in the desired manner. The device may optionally also include an illuminator which can be utilized to paint the area of interest to indicate both points of interest and primary points of reference during and/or after data acquisition.

47 OTHER INSTRUMENTATION↗

SALSA3D : a global 3D p-velocity model of the Earth's crust and mantle for improved event location.

To test the hypothesis that high quality 3D Earth models will produce seismic event locations which are more accurate and more precise, we are developing a global 3D P wave velocity model of the Earth's crust and mantle using seismic tomography. In this paper, we present the most recent version of our model, SALSA3D version 1.5, and demonstrate its ability to reduce mislocations for a large set of realizations derived from a carefully chosen set of globally-distributed ground truth events. Our model is derived from the latest version of the Ground Truth (GT) catalog of P and Pn travel time picks assembled by Los Alamos National Laboratory. To prevent over-weighting due to ray path redundancy and to reduce the computational burden, we cluster rays to produce representative rays. Reduction in the total number of ray paths is {approx}50%. The model is represented using the triangular tessellation system described by Ballard et al. (2009), which incorporates variable resolution in both the geographic and radial dimensions. For our starting model, we use a simplified two layer crustal model derived from the Crust 2.0 model over a uniform AK135 mantle. Sufficient damping is used to reduce velocity adjustments so that ray path changes between iterations are small. We obtain proper model smoothness by using progressive grid refinement, refining the grid only around areas with significant velocity changes from the starting model. At each grid refinement level except the last one we limit the number of iterations to prevent convergence thereby preserving aspects of broad features resolved at coarser resolutions. Our approach produces a smooth, multi-resolution model with node density appropriate to both ray coverage and the velocity gradients required by the data. This scheme is computationally expensive, so we use a distributed computing framework based on the Java Parallel Processing Framework, providing us with {approx}400 processors. Resolution of our model is assessed using a variation of the standard checkerboard method. We compare the travel-time prediction and location capabilities of SALSA3D to standard 1D models via location tests on a global event set with GT of 5 km or better. These events generally possess hundreds of Pn and P picks from which we generate different realizations of station distributions, yielding a range of azimuthal coverage and ratios of teleseismic to regional arrivals, with which we test the robustness and quality of relocation. The SALSA3D model reduces mislocation over standard 1D ak135 regardless of Pn to P ratio, with the improvement being most pronounced at higher azimuthal gaps.

99 GENERAL AND MISCELLANEOUS↗

A global 3D P-velocity model of the Earth's crust and mantle for improved event location : SALSA3D.

To test the hypothesis that high quality 3D Earth models will produce seismic event locations which are more accurate and more precise, we are developing a global 3D P wave velocity model of the Earth's crust and mantle using seismic tomography. In this paper, we present the most recent version of our model, SALSA3D version 1.5, and demonstrate its ability to reduce mislocations for a large set of realizations derived from a carefully chosen set of globally-distributed ground truth events. Our model is derived from the latest version of the Ground Truth (GT) catalog of P and Pn travel time picks assembled by Los Alamos National Laboratory. To prevent over-weighting due to ray path redundancy and to reduce the computational burden, we cluster rays to produce representative rays. Reduction in the total number of ray paths is {approx}50%. The model is represented using the triangular tessellation system described by Ballard et al. (2009), which incorporates variable resolution in both the geographic and radial dimensions. For our starting model, we use a simplified two layer crustal model derived from the Crust 2.0 model over a uniform AK135 mantle. Sufficient damping is used to reduce velocity adjustments so that ray path changes between iterations are small. We obtain proper model smoothness by using progressive grid refinement, refining the grid only around areas with significant velocity changes from the starting model. At each grid refinement level except the last one we limit the number of iterations to prevent convergence thereby preserving aspects of broad features resolved at coarser resolutions. Our approach produces a smooth, multi-resolution model with node density appropriate to both ray coverage and the velocity gradients required by the data. This scheme is computationally expensive, so we use a distributed computing framework based on the Java Parallel Processing Framework, providing us with {approx}400 processors. Resolution of our model is assessed using a variation of the standard checkerboard method. We compare the travel-time prediction and location capabilities of SALSA3D to standard 1D models via location tests on a global event set with GT of 5 km or better. These events generally possess hundreds of Pn and P picks from which we generate different realizations of station distributions, yielding a range of azimuthal coverage and ratios of teleseismic to regional arrivals, with which we test the robustness and quality of relocation. The SALSA3D model reduces mislocation over standard 1D ak135 regardless of Pn to P ratio, with the improvement being most pronounced at higher azimuthal gaps.

99 GENERAL AND MISCELLANEOUS↗

In-Situ phase and texture characterization of solution deposited PZT thin films during crystallization.

Ferroelectric lead zirconate titanate (PZT) thin films are used for integrated capacitors, ferroelectric memory, and piezoelectric actuators. Solution deposition is routinely used to fabricate these thin films. During the solution deposition process, the precursor solutions are spin coated onto the substrate and then pyrolyzed to form an amorphous film. The amorphous film is then heated at a higher temperature (650-700 C) to crystallize the film into the desired perovskite phase. Phase purity is critical in achieving high ferroelectric properties. Moreover, due to the anisotropy in the structure and properties of PZT, it is desirable to control the texture obtained in these thin films. The heating rate during crystallization process is known to affect the sequence of phase evolution and texture obtained in these thin films. However, to date, a comprehensive understanding of how phase and texture evolution takes place is still lacking. To understand the effects of heating rate on phase and texture evolution, in-situ diffraction experiments during the crystallization of solution deposited PZT thin films were carried out at beamline 6-ID-B, Advanced Photon Source (APS). The high X-ray flux coupled with the sophisticated detectors available at the APS synchrotron source allow for in-situ characterization of phase and texture evolution at the high ramp rates that are commonly used during processing of PZT thin films. A PZT solution of nominal composition 52/48 (Zr/Ti) was spin coated onto a platinum-coated Si substrate (Pt//TiO{sub x}//SiO{sub 2}//Si). The films were crystallized using an infrared lamp, similar to a rapid thermal annealing furnace. The ramp rate was adjusted by controlling the voltage applied to the infrared lamp and increasing the voltage by a constant step with every acquisition. Four different ramp rates, ranging from {approx}1000 C/s to {approx}1 C/s, were investigated. The sample was aligned in grazing incidence to maximize the signal from the thin films. Successive diffraction patterns were acquired with a 1s acquisition time using a MAR SX-165 CCD detector during crystallization. The sample to detector distance and the tilt rotations of the detector were determined in Fit2D{copyright} by using Al{sub 2}O{sub 3} as the calibrant. These corrections were applied to the patterns when binning the data into radial (2{theta}) and azimuthal bins. The texture observed in the thin film was qualitatively analyzed by fitting the intensity peaks along the azimuthal direction with a gaussian profile function to obtain the integrated intensity of the peaks. Data analysis and peak fitting was done using the curve fitting toolbox in MATLAB{copyright}. A fluorite-type phase was observed to form before the perovskite phase for all ramp rates. PtxPb is a transient intermetallic formed due to the interaction of the thin film and the bottom electrode during crystallization. Ramp rate was observed to significantly affect the amount of PtxPb observed in the thin films during crystallization. Ramp rate was also observed to affect the final texture obtained in the thin films. These results will be discussed in the poster in view of the current understanding of these materials.

43 PARTICLE ACCELERATORS↗