Instrumentation requirements for a flight reentry heating experiment at interplanetary return velocity
Flight reentry heating instrumentations required for ballistic entry simulation of radiative and convective heating rates
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flight reentry heating instrumentations required for ballistic entry simulation of radiative and convective heating rates
Determination of transonic aerodynamic characteristics of spherically blunted 55 and 60 degree half-angle cones in ballistic range tests
Flash lamp with ballistic piston compressor for absorption spectroscopy measurements in ultraviolet region
Artificial meteors ablation and luminosity measurements, using ballistic range shadowgraph and radiometric equipment for velocity history, shock wave formation and mass loss process
Low density plasma-double gridded antenna system for ion and electron signal propagation studies, observing multiple reflections of acoustic and ballistic pulses and bulk phenomenon
Electron beam vapor deposited CoCrAlY coating composition optimization with ballistic impact and furnace/long term burner rig oxidation tests
Exothermic hypersonic blunt body flow periodic instability mechanism, using ballistic range with schlieren photographic equipment
Switched mode adaptive terminal control for propulsive landing of nonlifting gravity turn ballistic vehicle under uncertain atmospheric conditions
The characteristics and capabilities are described of solar electric propulsion (SEP) for performing Mars Surface Sample Return (MSSR) missions. The scope of the study emphasizes trajectory/payload analysis and the comparison of mission/system tradeoff options. The MSSR mission is examined only for the 1981-82 launch opportunity. Several other study constraints which bear directly on the results obtained are: (1) return samples in the range 5-25 kg, (2) use of lifting (offset C.G.) atmospheric entry at Mars which allows a low ratio (1.25) of entry weight to landed weight, and (3) rendezvous and docking in Mars orbit. Major results of the study are presented as performance curves of earth departure mass versus sample size for a number of different mission/system options. These options represent a spectrum of trip time, launch vehicle capability, combinations of low-thrust and ballistic maneuvers, chemical retro type, and earth recovery mode.
The results of astrometric and photogrammetric plate reduction techniques for a short focal length camera are compared. Several astrometric models are tested on entire and limited plate areas to analyze their ability to remove systematic errors from interpolated satellite directions using a rigorous photogrammetric reduction as a standard. Residual plots are employed to graphically illustrate the analysis. Conclusions are made as to what conditions will permit the astrometric reduction to achieve comparable accuracies to those of photogrammetric reduction when applied for short focal length ballistic cameras.
The West German tracking stations are equipped with ballistic cameras. Plate measurement and plate reduction must therefore follow photogrammetric methods. Approximately 100 star positions and 200 satellite positions are measured on each plate. The mathematical model for spatial rotation of the bundle of rays is extended by including terms for distortion and internal orientation of the camera as well as by providing terms for refraction which are computed for the measured coordinates of the star positions on the plate. From the measuring accuracy of the plate coordinates it follows that the timing accuracy for the exposures has to be about one millisecond, in order to obtain a homogeneous system.
A test program was carried out to demonstrate an igniter motor initiation system utilizing the bimetallic material Pyrofuze for a solid propellant rocket with controlled low rate of thrust buildup. The program consisted of a series of vacuum ignition tests using a slab burning window motor that simulated the principal initial ballistic parameters of the full scale igniter motor. A Pyrofuze/pyrotechnic igniter system was demonstrated that uses a relatively low electrical current level for initiation and that eliminates the necessity of a pyrotechnic squib, with its accompanying accidental firing hazards and the typical basket of pyrotechnic pellets. The Pyrofuze ignition system does require an initial constraining of the igniter motor nozzle flow, and at the low initiating electrical current level the ignition delay time of this system was found to be quite sensitive to factors affecting local heat generation or loss rates.
The major issues affecting the selection of a space shuttle system were considered. These included the HO orbiter/ballistic recoverable booster series-burn configuration; the HO orbiter/ballistic recoverable booster parallel-burn (rocket-assisted orbiter-RAO) configuration; and the HO orbiter/flyback LOX/RP booster configuration. The booster studies emphasized the series-burn ballistic design, but the differences required for RAO application were identified and evaluated. Definition of the RAO configuration parameters and technical problem areas, establishing approaches to possible solutions, and developing program costs are discussed.
The research is pertinent to the realization of a self-sustained fissioning plasma for applications such as nuclear propulsion, closed cycle MHD power generation using a plasma core reactor, and heat engines such as the nuclear piston engine, as well as the direct conversion of fission energy into optical radiation (nuclear pumped lasers). Diagnostic measurement methods and experimental devices simulating plasma core reactor conditions are discussed. Studies on the following topics are considered: (1) ballistic piston compressor (U-235); (2) high pressure uranium plasma (natural uranium); (3) sliding spark discharge (natural uranium); (4) fission fragment interaction (He-3 and U-235); and (5) nuclear pumped lasers (He-3 and U-235).
The atmospheric ascent flight phase of the mated composite booster and orbiter is discussed. The composite recoverable space shuttle booster and orbiter exhibits unique flight control characteristics. This uniqueness results from large lifting surfaces and aerodynamic and structural assymetrics. An effective load relief technique reduces aerodynamic loads on both the booster and the orbiter. Reducing aerodynamic loads permits decreasing the structural weight of the lifting and stabilizing surfaces. An orbiter payload penalty is caused by trajectory deviations resulting from load relief. However, the net effect of an effective load relief technique is an increase in payload capability. Atmospheric launch dynamics investigations have been carried out for different configuration types, which include expendable, straight wing, delta wing, and ballistic recoverable boosters.
A silicone material was developed which gives suitable ablative protection in the high heat flux, high shear environments encountered in severe reentry applications, such as nose cones for ballistic vehicles and protection of leading edges or other critical areas of a vehicle. In addition, the ease of handling, low application cost, and room temperature cure make such a silicon material suitable nozzles for the large rockets necessary for vehicle launching. The development of this product is traced from the selection of suitable polymers through the choice of fillers and the finalization of filler loadings.
A quantitative experimental and theoretical assessment of the role of wind-tunnel disturbances in the boundary-layer transition process at hypersonic speeds is presented. The various approaches and recent results for the development of a low-noise-level tunnel are presented. A statistical parametric study of transition data with a large computer is shown for cones in free flight, ballistic ranges, and wind tunnels at essentially zero angle of attack. New transition results for slender cones at small angle of attack are also given, as are studies of transition at high angle of attack, which are compared with various correlation attempts. Included are results which indicate that hypersonic transition in the outer part of the boundary layer precedes the manifestation of transition at the wall.
A functional description of a prototype six component magnetic balance system for wind tunnel application is presented. The relationship of forces and moments on a ferromagnetic body to applied magnetic fields and gradients is shown. The method of producing the required fields in the prototype balance, its magnet arrangement and its performance are discussed. Aerodynamic data obtained with this balance on several model geometries are presented and compared with wind tunnel and ballistic range results.