Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Room temperature ferromagnetism and ferroelectricity in cobalt-doped LiNbO{sub 3} film

(5 at. %) cobalt-doped LiNbO{sub 3} (Co:LN) films were prepared by combinatorial laser molecular-beam epitaxy on Si (100). The Co:LN films with Co{sup 2+} replacing Nb exhibit room temperature ferromagnetism of 1.2{mu}{sub B}/Co and Curie temperature of {approx}540 K. Through a Ag/Co:LN/Si metal-ferroelectric-semiconductor field effect transistor configuration, ferroelectric measurements show that the films display hysteresis loops at 300 K and ferroelectric transition temperature of {approx}610 K. The hysteresis and the asymmetry in capacitance-voltage and leakage-voltage curves are ascribed to trapping/detrapping process of charges at the Co:LN/Si interface. The coexistence of room temperature ferromagnetism and ferroelectricity makes Co:LN a promising single-phase multiferroic.

36 MATERIALS SCIENCE↗

Room temperature Si {delta}-growth on Ge incorporating high-K dielectric for metal oxide semiconductor applications

A low temperature Al{sub 2}O{sub 3}/4 monolayer amorphous Si gate stack process was demonstrated on p-type Ge wafers using atomic layer deposition and molecular beam epitaxy. Multifrequency capacitance-voltage (C-V) and current-voltage (I-V) characteristics showed excellent electrical properties of the Pt/Al{sub 2}O{sub 3}/4 ML Si/Ge metal oxide semiconductor capacitor. No kinks from 1 MHz to 4 kHz and a leakage current density of 2.6x10{sup -6} A/cm{sup 2} at 1 V with an equivalent oxide thickness of 2.5 nm. The interface characterization using a conductance method showed that interface trap density at the near midgap was 8x10{sup 12} eV{sup -1} cm{sup -2} and a mean capture cross section of holes was extracted to be 10{sup -16} cm{sup 2}.

36 MATERIALS SCIENCE↗

Development and research of a coaxial microwave plasma thruster

An overview of the research on a coaxial microwave plasma thruster at Northwestern Polytechnic University is presented. Emphasis is put on the development and research on key components of the thruster system, a microthrust balance, plasma plume diagnostics, and a numerical simulation of the plasma flow field inside the thruster cavity. The developed thruster cavity is chosen from a coaxial resonant cavity with concentrated capacitance, which can operate well in atmosphere and vacuum conditions. The development of a microwave source shows that a magnetron powered by a switch power supply has advantages in the power level and efficiency, but a solid state microwave source synthesized from the arsenide field effect transistor is superior in weight and volume. Through elimination of the effect of large gravity and resistance force induced by a gas pipe line and a microwave transmitting line on the microthrust, 15 mN and 340 s in the performance of the microwave plasma thruster at 70 W and with helium gas are measured. Diagnosing experiment shows that the plasma plume density is in the range of (1-7.2)x10{sup 16}/m{sup 3}. Numerical simulation of the plasma flow field inside the coaxial thruster cavity shows that there is a good match between the microwave power and gas flow rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of Kr gas mixing in oxygen plasma etching of ferroelectric poly(vinylidene fluoride-trifluoroethylene) copolymer films

Oxygen plasma etching characteristics of ferroelectric poly(vinylidene fluoride-trifluoroethylene) copolymer films are investigated. It was found in MFM (M: metal; F: ferroelectric) capacitors that plasma damage effects to the ferroelectric properties were insignificant when Au metal masks were used. On the contrary, C-V (capacitance versus voltage) characteristics were significantly degraded in plasma-etched MFIS (I: insulator; S: semiconductor) diodes. The origin of this phenomenon is speculated to be degradation of the SiO{sub 2}/Si interface by energetic oxygen ions and then mixing of Kr gas to the oxygen plasma is attempted to decrease the plasma damage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric relaxation and electronic structure of double perovskite Sr{sub 2}FeSbO{sub 6}

The dielectric property and the electronic structure of a double perovskite, Sr{sub 2}FeSbO{sub 6} (SFS) synthesized by solid state reaction technique are investigated. The x-ray diffraction of the sample taken at room temperature shows cubic phase. The scanning electron micrograph of the sample also confirms the formation of the single phase of the material. We have measured the capacitance and conductance of SFS in a frequency range from 50 Hz to 1 MHz and in a temperature range from 163 to 463 K. A relaxation is observed in the entire temperature range as a gradual decrease in {epsilon}{sup '}({omega}) and as a broad peak in {epsilon}{sup ''}({omega}). The frequency dependent electrical data are analyzed in the framework of conductivity and electric modulus formalisms. The frequencies corresponding to the maxima of the imaginary electric modulus at various temperatures are found to obey an Arrhenius law with an activation energy of 0.74 eV. The Cole-Cole model is used to study the dielectric relaxation of SFS. The scaling behavior of imaginary part of electric modulus suggests that the relaxation describes the same mechanism at various temperatures. The frequency dependent conductivity spectra follow the universal power law. The electronic structure of the SFS is studied by x-ray photoemission spectroscopy (XPS). Its valence band consists mainly of the oxygen 2p-states hybridized with the Fe 3d-states. The XPS spectra are investigated by the first principles full potential linearized augmented plane wave method. The angular momentum projected total and partial density of states obtained from first principles calculation are used to analyze the XPS results of the sample. The calculated electronic structures of SFS are qualitatively similar to those of the XPS spectra in terms of spectral features, energy positions, and relative intensities. The electronic structure calculation reveals that the electrical properties of SFS are dominated by the interaction between transition-metal and oxygen ions.

36 MATERIALS SCIENCE↗

Interfacial and electrical properties of SrBi{sub 2}Ta{sub 2}O{sub 9}/ZrO{sub 2}/Si heterostructures for ferroelectric memory devices

We have investigated the interfacial and frequency dependent electrical properties of metal-ferroelectric-insulator-semiconductor capacitors with SrBi{sub 2}Ta{sub 2}O{sub 9} (SBT) ferroelectric films grown on ZrO{sub 2} buffer layer coated Si. Heterostructure SBT and ZrO{sub 2} thin films were deposited using rf magnetron sputtering. Interfacial and surface roughness parameters of heterostructures were extracted from the simulation of specular x-ray reflectivity data. The structure exhibited clockwise capacitance-voltage hysteresis with a maximum memory window of 2.0 V at a bias voltage of {+-}7 V. Frequency dependent (5 kHz-1 MHz) measurements at room temperature indicated that the clockwise hysteresis originates from the ferroelectric domain reversal. A minimum leakage current density of 4x10{sup -8} A/cm{sup 2} of fabricated capacitors at an applied voltage of {+-}5 V revealed that the ZrO{sub 2} buffer layer prevents the interfacial diffusion between SBT thin film and the substrate, resulting in an improvement of interface quality. The charge retention time of the ferroelectric capacitor was studied as a function of buffer layer thickness.

36 MATERIALS SCIENCE↗

Comparison of n-type and p-type GaAs oxide growth and its effects on frequency dispersion characteristics

The electrical characteristics of n- and p-type gallium arsenide (GaAs) capacitors show a striking difference in the ''accumulation'' capacitance frequency dispersion. This difference has been attributed by some to a variation in the oxide growth, possibly due to photoelectrochemical properties of the two substrates. We show that the oxide growth on n- and p-type GaAs substrates is identical when exposed to identical environmental and chemical conditions while still maintaining the diverse electrical characteristics. The difference in electron and hole trap time constants is suggested as the source of the disparity of the frequency dispersion for n-type versus p-type GaAs devices.

36 MATERIALS SCIENCE↗

SI traceable calibration of an instrumented indentation sensor spring constant using electrostatic force

We present a measurement scheme for creating reference electrostatic forces that are traceable to the International System of Units. This scheme yields reference forces suitable for calibrating the force sensitivity of instrumented indentation machines and atomic force microscopes. Forces between 10 and 200 {mu}N were created and expressed in terms of the voltage, length, and capacitance between a pair of interacting electrodes. The electrodes comprised an electrically conductive sphere mounted as a tip on an instrumented indentation sensor, and a planar counterelectrode fixed to a sample stage in close proximity to the sphere. For comparison, we applied mechanical forces of similar magnitudes, first using deadweights and then using a reference force sensor. The deflection of the sensor due to the various applied forces was measured using an interferometer. A spring constant for the sensor was computed from the observed records of force versus displacement. Each procedure yielded a relative standard uncertainty of approximately 1%; however, the electrostatic technique is scalable and could provide traceable reference forces as small as a few hundred piconewtons, a range far below anything yet achieved using deadweights.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of submonolayer Mg on CoFe-MgO-CoFe magnetic tunnel junctions

CoFe-MgO-CoFe magnetic tunnel junctions (MTJs) were fabricated by means of ion beam sputtering of MgO as well as subsequent thin films on CoFe. We demonstrated that when a submonolayer of Mg was deposited on the CoFe layer prior to the deposition of MgO, profound improvement in the performance of the CoFe-Mg-MgO-CoFe MTJ was achieved compared to that without the Mg layer. ac impedance measurement indicated that the interfacial Mg layer resulted in fivefold increase in the magnetoresistance ratio from 0.76% for MTJs without it to 4% for that with it. Complex-capacitance (CC) spectra of MTJs showed that the contribution in the relaxation frequency by textured MgO increased. This indicated that the submonolayer Mg improved the texture of the subsequently deposited MgO. Bias-dependent complex-impedance (CI) spectra reveal that interfacial defects were also suppressed due to the submonolayer of Mg. Results obtained from x-ray reflectivity and transmission electronic microscopy were also consistent with those of CI and CC.

36 MATERIALS SCIENCE↗

Infrared analysis of hole properties of Mg-doped p-type InN films

Mg-doped InN films grown by plasma-assisted molecular beam epitaxy were characterized by infrared reflectance. Signatures of p-type conductivity in the spectra were obtained in the same doping density range where the existence of net acceptors was found by electrolyte capacitance-voltage measurements. Numerical spectrum analysis, which takes into account the large broadening factor of the normal mode energies of longitudinal optical phonon-plasmon coupling yielded high hole densities in the range of (0.1-1.2)x10{sup 19} cm{sup -3} and optical mobilities in the range of 25-70 cm{sup 2}/V s.

36 MATERIALS SCIENCE↗

Analysis of the acoustoelectric behavior of microwave frequency, temperature-compensated AlN-based multilayer coupling configurations

Piezoelectric AlN films, 1.3-6.2 {mu}m thick, have been grown on bare and metallized Al{sub 2}O{sub 3}(0001) substrates by reactive radio-frequency-sputtering technique at 180 deg. C. The films were uniform, stress-free, highly c-axis oriented normal to the surface, and extremely adhesive to the substrates. Surface acoustic wave (SAW) delay lines, showing harmonic modes with operating frequencies up to about 2.44 GHz, were obtained just using conventional optical lithography at 7.5 {mu}m linewidth resolution. Four interdigital transducer (IDT)/counter electrode configurations were obtained locating the IDTs either on the AlN free surface or at the Al{sub 2}O{sub 3}/AlN interface, with and without an Al thin metal film opposite the IDTs. The temperature induced shift of the fundamental and harmonic operating frequencies of the four configurations was measured at different temperatures in the range from -25 to 70 deg. C. The first order temperature coefficient of delay (TCD) of the four structures was experimentally evaluated for different film thickness values and for SAWs propagating along and normal the Al{sub 2}O{sub 3} a-axis. Eight AlN thicknesses, i.e., the temperature-compensated points (TCPs), were experimentally estimated at which the TCD is equal to 0 ppm/deg. C. These TCPs were found to be in good agreement with those theoretically evaluated. The SAW propagation along the four coupling structures was investigated in terms of phase and group velocity, electromechanical coupling coefficient, electrical potential, and IDT capacitance and radiation resistance for different film thickness values and SAW propagation directions. The numerical simulation of the mechanical and electrical behaviors of the coupling structures showed how the electroacoustic transduction efficiency, the IDT directivity, and bandwidth can benefit from having different electrical boundary conditions. The obtained results confirm the AlN feasibility to the implementation of SAW devices for application to gigahertz range, good electromechanical coupling, thermally stable electroacoustic devices.

36 MATERIALS SCIENCE↗

Performance Enhancement of PFET Planar Devices by Plasma Immersion Ion Implantation (P3I)

A study of doping the pMOS Lightly Doped Drain (LDD) by Plasma Immersion Ion Implantation (P3i) with BF3 is presented which demonstrates a better transistor performance compared to standard beam line Ion Implantation (I/I). The benefit of P3i comes from the broad angular distribution of the impinging ions thereby doping the poly-silicon gate sidewall as well. Gate capacitance of short channel devices has been measured and clearly shows this improvement. This model is clearly supported by high resolution 2D-carrier profiles using Scanning Spreading Resistance Microscopy (SSRM) which shows this gate sidewall doping. The broad angular distribution also implies a smaller directional sensitivity (to for instance the detailed gate edge shape) and leads to devices which are perfectly balanced, when Source and Drain electrode are switched.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical and optoelectronic characterization of reactively sputtered molybdenum-silicon-nitride alloy metal gate electrodes

With continued transistor scaling, work function tuning of metal gates has become important for advanced complementary-metal-oxide-silicon applications. The work function tuning of reactively sputtered Mo{sub x}Si{sub y}N{sub z} (also referred to as MoSiN) gates has been studied through the incorporation of nitrogen. The nitrogen concentration in the MoSiN films was altered by controlling the gas flow ratio, R{sub N}=N{sub 2}/(N{sub 2}+Ar), during gate deposition. The sheet resistance (R{sub s}) of blanket MoSiN films, measured using four-point resistance method, was found to increase as the gas flow ratio was varied from 10% to 40%. Current-voltage measurements confirmed excellent electrical stability of MoSiN/SiO{sub 2}/p-Si gate stack for applied electric fields ranging up to 6 MV/cm. High frequency capacitance-voltage measurements were used to extract the MoSiN work function ({phi}{sub m}) using the relationship between the flatband voltage (V{sub FB}) and the oxide thickness (t{sub ox}). The extracted MoSiN/SiO{sub 2} interfacial barrier heights, obtained through the internal photoemission of electrons, were used to corroborate the extracted values of MoSiN work function. The MoSiN work functions ({phi}{sub m}), extracted independently using both techniques, were consistent and were observed to decrease with increasing gas flow ratio [N{sub 2}/(N{sub 2}+Ar)]. Secondary ion mass spectrometry depth analysis revealed uniform distribution of nitrogen throughout the bulk MoSiN films, with no piling up at gate-dielectric interface. X-ray photoelectron spectroscopy surface analysis suggested a steady increase in the Mo-N bonds, and therefore the total nitrogen concentration (from {approx}20% to 32%), as the gas flow ratio is increased from 10% to 40%. A similar trend was observed in the nitrogen concentration (in percent), measured using Rutherford backscattering spectroscopy, for these gate deposition conditions. These material characterization results demonstrate that the increase in nitrogen concentration in MoSiN films is consistent with the lowering of MoSiN work function. Moreover, the work function of reactively sputtered Mo{sub x}Si{sub y}N{sub z} films was found to be variable over {approx}0.3 eV by adjusting the nitrogen concentration.

36 MATERIALS SCIENCE↗

HfO{sub x}N{sub y} gate dielectric on p-GaAs

Plasma nitridation method is used for nitrogen incorporation in HfO{sub 2} based gate dielectrics for future GaAs-based devices. The nitrided HfO{sub 2} (HfO{sub x}N{sub y}) films on p-GaAs improve metal-oxide-semiconductor device characteristics such as interface state density, accumulation capacitance, hysteresis, and leakage current. An equivalent oxide thickness of 3.6 nm and a leakage current density of 10{sup -6} A cm{sup -2} have been achieved at V{sub FB}-1 V for nitrided HfO{sub 2} films. A nitride interfacial layer (GaAsO:N) was observed at HfO{sub 2}-GaAs interface, which can reduce the outdiffusion of elemental Ga and As during post-thermal annealing process. Such suppression of outdiffusion led to a substantial enhancement in the overall dielectric properties of the HfO{sub 2} film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of boron-interstitial clusters on Hall scattering factor in high-dose boron-implanted ultrashallow junctions

The Hall scattering factor r{sub H} has been determined for holes in high-dose boron-implanted ultrashallow junctions containing high concentrations of boron-interstitial clusters (BICs), combining scanning capacitance microscopy, nanospreading resistance, Hall effect, and secondary ion mass spectroscopy measurements. A value of r{sub H}=0.74{+-}0.1 has been found in reference defect-free fully activated junctions, in good agreement with the existing literature. In the case of junctions containing high concentrations of immobile and electrically inactive BICs, and independently of the implant or the annealing process, the r{sub H} value has been found to be equal to 0.95{+-}0.1. The increase in the r{sub H} value is explained in terms of the additional scattering centers associated to the presence of high concentrations of BICs.

36 MATERIALS SCIENCE↗

Single-scan measurement of conductance of a quartz crystal microbalance array coupled with resonant markers for biosensing in liquid phase

This work presents a method for sensing the viscoelastic property of liquid/solid interface using a quartz crystal microbalance (QCM) array. Each sensor in a QCM array has a unique resonant frequency and can be identified by a single-scan measurement of admittance (or impedance). The resonant frequency encoding at each sensor in an array was realized by connecting a capacitor with a known capacitance, called a resonant marker, to the sensor in series. Changes in the resonant frequency of all sensors in an array can be determined using an impedance analyzer and a program that determines the frequencies at which the conductance is at a local maximum. The sensing method allows every sensor output (resonant frequency) to be obtained without the use of time-consuming multiplexed hardware and software. Adsorptions of biomolecules by multiple sensor are monitored in the liquid phase to demonstrate the feasibility of frequency encoding using resonant markers and the single-scan measurement of conductance of a QCM array.

36 MATERIALS SCIENCE↗

Characteristics of rf H{sup -} Ion Source by Using FET Power Source

Characteristics of radio frequency(rf) plasma production are investigated using a FET inverter power supply as an rf generator. The matching circuit in the inverter system is simple compared to a conventional 50 Ohm matching system and only an imaginary part of the impedance of rf transmission should be matched by adjusting operating frequency or capacitance of the circuit. An electron density over 10{sup 18} m{sup -3} is produced in argon plasma with 1 kW rf power. Lower densities are obtained in helium and hydrogen plasmas compared to the argon plasma. Effect of axial magnetic field in driver region is examined. Electron density more than 10{sup 18} m{sup -3} is obtained at the hydrogen gas pressure around 1 Pa with the help of the axial magnetic field.

43 PARTICLE ACCELERATORS↗

Neutron-irradiated Schottky diodes with self-assembled InAs quantum dots: Optical and electrical properties

The effect of neutron irradiation on optical and electrical properties of self-assembled InAs/GaAs quantum dots (QDs) is studied for neutron doses up to phi{sub n}=3x10{sup 14} cm{sup -2}. The QDs are embedded in n-type GaAs Schottky diodes grown by molecular beam epitaxy on GaAs(001). We observe an initial increase in QD photoluminescence followed by a decrease as a function of neutron irradiation. The increase in photoluminescence is attributed to a more effective carrier trapping and relaxation from the wetting layer into the QDs via radiation-induced defects. The losses of photoluminescence at higher neutron doses are caused by defects, which act as nonradiative recombination centers. The observed dependence of the photoluminescence on the laser excitation power can be explained with saturation effects. Deep level transient spectroscopy experiments reveal multiple overlapping electron traps. Furthermore, an enhanced introduction of defects in the QD layer is observed. Electrical characterization of the Schottky diodes via capacitance-voltage spectroscopy reveals that the doping condition in the diodes changes due to the introduction of defects. This fact has to be taken into account if QDs are used in electrical devices in radiation-harsh environments as it is shown by low-temperature deep level transient spectroscopy experiments on electron emission processes from QD levels.

77 NANOSCIENCE AND NANOTECHNOLOGY↗