Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Single-Bubble Flow Boiling Phenomena - Interface Tracking Simulation

Boiling, as one of the most efficient heat transfer mechanisms, is widely used in various engineering systems. Better understanding and modeling of this process remains a major challenge in multiphase flow research. The distribution of vapor in boiling system affects the heat transfer rate and may cause unfavorable conditions, such as heater burn-out. A number of flow regimes have been observed experimentally. In general, there are three regimes under boiling conditions: nucleate boiling, transition boiling, and film boiling. The nucleate boiling regime is categorized into partial boiling regime and fully developed nucleate boiling, according to behavior of bubble dynamics and heat transfer characteristics. In the first region, as the wall temperature increases, the fraction of the wall surface subject to nucleate boiling increases until bubble formation occupies the entire heated surface. Heat transfer in this region is a complex mixture of single-phase forced convection and nucleate boiling. As bubble density increases, bubbles turn to coalesce and form insulating vapor patches, which impedes liquid flow back to the surface. The heat transfer rate under this condition reduces dramatically. This point is called Critical Heat Flux (CHF), which leads to boiling crisis. The behavior of boiling crisis is dependent on local fluid conditions due to bubble growth and departure. Experiments are the ultimate tool for boiling model development and verification, but they still lack some capabilities needed for better understanding of the local mechanism of this phenomena. It's difficult to capture many important details at the pressure/temperature conditions of interest using experimental techniques, such as full three dimensional measurements of velocity and temperature distribution and estimates of heat flux partitioning during the boiling process. The interface tracking simulation (ITS) is one of the promising approaches to describe heat transfer of boiling phenomena and their underlying mechanisms. The advances of high performance computing (HPC) in recent years made it possible to apply DNS to a wide variety of adiabatic flows. Some work has been done to implement evaporation / condensation models as well. Lee and Nydahl performed a numerical simulation of bubble growth and departure assuming that the bubble has the shape of a truncated sphere and a micro-layer exists during bubble growth. A 2-D cylindrical bubbles simulation has been done by Son with a simplified model to predict the heat flux in a thin liquid micro-layer. A direct simulation of 2D film boiling is conducted by Juric and Tryggvason. The film boiling, below critical pressure with a modified Level Set Method, is studied by Son and Dhir. Ose and Kunugi have developed a boiling and condensation model on subcooled boiling phenomena. Fuchs performed numerical simulations of bubble growth and departure considering wall conduction effects. Fully transient heat and fluid flow is modeled with a free surface of a rising bubble and a periodic calculation of the whole cycling of a growing, detaching, and rising bubble. Mukherjee and Kandikar have done a numerical simulation of an evaporating meniscus on a moving heated surface with level set method. The heat transfer associated with the advancing and receding contact angle has been studied. To develop the capability of physics-based boiling process, in the presented work the energy and momentum equations are coupled to simulate single-bubble growth scenarios. For a single bubble simulation in infinite liquid, the analytical solution exists and can be compared with the numerical results for verification purposes. The presented capabilities will be utilized in the large scale DNS of boiling flows in the future. The finite-element based code, PHASTA is used for the simulation. It is a parallel, hierarchic, higher-order accurate, adaptive, stabilized, transient analysis flow solver, which has been shown to be an effective tool for a wide range of single and two-phase flow problems. It has been shown to be highly scalable on top supercomputers ({approx}85% scaling on up to 3 million mesh partitions using a 92 billion element mesh . PHASTA has been shown to reliably predict the details of adiabatic bubbly flows as well as single-phase flows with heat transfer. To develop the capability of physics-based boiling process, in the presented work the energy and momentum equations are coupled to simulate a single-bubble growth scenario. For a single bubble growth in superheated water, the analytical solution exists and can be compared with the numerical results for verification purposes. The second-order accurate spatial and time discretization is used for the flow solver in the presented work. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Scaling of thermal stratification in outlet plena of SFRs with gallium as a surrogate fluid

Due to its high thermal diffusivity, liquid sodium can develop thermally stratified regions in the hot and cold pools of SFRs under certain off normal operating conditions. The temperature gradients in the fluid give rise to mixed convection flow in which flow velocities result both from pressure gradients and from volume forces induced by density gradients. High thermal diffusivity and low momentum diffusivity leads to reduced thermal mixing and enhanced stratification. Thermal stratification, if not looked carefully in the design, can lead to severe consequences in normal operation with forced coolant circulation and during off-normal natural circulation. The resulting hydraulic and thermal loads can cause the failure modes in structures and components critical for reactor safety. Thermal stratification in the SFR pools can lead to thermal fatigue, which can lead to structural and material failure, or pose serious concerns for the reactor safety. In addition to thermo-structural issues, the reactivity changes are significantly impacted due to density or temperature driven movement of liquid sodium. Temperature changes or gradients in the Upper Instrumentation Structures (UIS) of SFRs can lead to thermal contraction, a case that can lead to positive reactivity insertion after core shut-down. The motivation of this work is to design a scaled down experimental facility which can generate high fidelity data for thermal stratification physics to validate 3-dimensional (3D) Computational Fluid Dynamics (CFD) models. These validated CFD codes can be used to improve the 1-dimensional (1D) system level codes such as SAS4A/SASSYS-1 which are currently not capable of simulating thermal stratification accurately. These improvements in 1D system level SAS4A/SASSYS-1 codes can significantly improve the safety analyses and design of SFRs. The GaTE facility outlet plenum model is designed based on physics based similarities. Thermal stratification physics is governed primarily by the Richardson numbers (Ri). The expected low flow rates during off-normal conditions can lead to a high degree of thermal stratification in the outlet plenum with a corresponding Ri = 530. Therefore, the inlet flow velocities and inlet hydraulic diameter for the gallium coolant entering the test vessel are required to achieve same Ri. The design of test vessel in GaTE facility is finalized to a 1/20. scale outlet plenum height of the ABTR. This design of the test facility will allow the decoupling of the thermal stratification physics at low flow rates with the transient natural circulation. In other words, it will enable effective control to study thermal stratification at very low flow rates. Numerical studies are conducted with a 3D CFD code to examine the thermal behavior of the selected test design. Simulation results show that thermal gradients are present only in the vertical or axial direction which are similar to the behavior reported in previous studies on full scale SFR models. Future work will involve the experimental studies using the GaTE facility with the high fidelity instrumentation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Two-dimensional positive column structure in a discharge tube with radius discontinuity

The low-pressure (40 and 90 Pa) low-current (4 and 10 mA) direct current discharge in a tube with a sharp change of its radius is studied both numerically and experimentally. A fully self-consistent hybrid numerical model of a two-dimensional non-uniform positive column in neon is developed using a nonlocal approach. The model combines kinetic simulation of the electrons (under two-terms approach) and fluid description of the neon ions and permits to calculate the distribution of all plasma parameters in the direct current discharges in the cameras with cylindrical geometry and radius discontinuity. The simulation results are compared with the measured 585.3 nm neon spectral line absolute intensities and excited 1s{sub 3} metastable neon atom number densities. Non-local electron kinetics in the transition region and formation of standing strata are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gas-kinetic unified algorithm for hypersonic flows covering various flow regimes solving Boltzmann model equation in nonequilibrium effect

Based on the Gas-Kinetic Unified Algorithm (GKUA) directly solving the Boltzmann model equation, the effect of rotational non-equilibrium is investigated recurring to the kinetic Rykov model with relaxation property of rotational degrees of freedom. The spin movement of diatomic molecule is described by moment of inertia, and the conservation of total angle momentum is taken as a new Boltzmann collision invariant. The molecular velocity distribution function is integrated by the weight factor on the internal energy, and the closed system of two kinetic controlling equations is obtained with inelastic and elastic collisions. The optimization selection technique of discrete velocity ordinate points and numerical quadrature rules for macroscopic flow variables with dynamic updating evolvement are developed to simulate hypersonic flows, and the gas-kinetic numerical scheme is constructed to capture the time evolution of the discretized velocity distribution functions. The gas-kinetic boundary conditions in thermodynamic non-equilibrium and numerical procedures are studied and implemented by directly acting on the velocity distribution function, and then the unified algorithm of Boltzmann model equation involving non-equilibrium effect is presented for the whole range of flow regimes. The hypersonic flows involving non-equilibrium effect are numerically simulated including the inner flows of shock wave structures in nitrogen with different Mach numbers of 1.5-Ma-25, the planar ramp flow with the whole range of Knudsen numbers of 0.0009-Kn-10 and the three-dimensional re-entering flows around tine double-cone body.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical investigation of microbial quorum sensing under various flow conditions

Microorganisms efficiently coordinate phenotype expressions through a decision-making process known as quorum sensing (QS). We investigated QS amongst distinct, spatially distributed microbial aggregates under various flow conditions using a process-driven numerical model. Model simulations assess the conditions suitable for QS induction and quantify the importance of advective transport of signaling molecules. In addition, advection dilutes signaling molecules so that faster flow conditions require higher microbial densities, faster signal production rates, or higher sensitivities to signaling molecules to induce QS. However, autoinduction of signal production can substantially increase the transport distance of signaling molecules in both upstream and downstream directions. We present empirical approximations to the solutions of the advection–diffusion–reaction equation that describe the concentration profiles of signaling molecules for a wide range of flow and reaction rates. These empirical relationships, which predict the distribution of dissolved solutes along pore channels, allow to quantitatively estimate the effective communication distances amongst multiple microbial aggregates without further numerical simulations.

59 BASIC BIOLOGICAL SCIENCES↗

Evolution of string-wall networks and axionic domain wall problem

We study the cosmological evolution of domain walls bounded by strings which arise naturally in axion models. If we introduce a bias in the potential, walls become metastable and finally disappear. We perform two dimensional lattice simulations of domain wall networks and estimate the decay rate of domain walls. By using the numerical results, we give a constraint for the bias parameter and the Peccei-Quinn scale. We also discuss the possibility to probe axion models by direct detection of gravitational waves produced by domain walls.

79 ASTRONOMY AND ASTROPHYSICS↗

Systematic parameter study of a nonlinear electromagnetic energy harvester with matched magnetic orientation: Numerical simulation and experimental investigation

Here, this paper reports the systematic parameter study of a tristable nonlinear electromagnetic energy harvester for ambient low-frequency vibration. Numerical simulations and experimental investigations are performed on the harvester which consists of a cantilever beam, a tip coil, two tip magnets and two external side magnets. The external side magnets are deployed symmetrically along a concave surface parallel to the trajectory of the cantilever tip with a controllable distance so that the magnetic orientation of the tip magnets are matched with that of the side magnets. Therefore, instead of the ternary position parameters (d, h, α), a binary parameters pair (d 0 , d) is used to characterize the position of the side magnets and the performance of the energy harvester. The magnetic force and magnetic field on the cantilever tip therefore depend on the relative distance in the tip displacement direction between the tip magnets and side magnets, but is independent of the position of the side magnets on the concave surface. The magnetic force (field)-distance relationship is measured experimentally and curve fitted to obtain explicit expressions, in order to characterize the magnetic force (field) when the side magnets are placed at varied positions along the concave surface. Numerical simulation is, then, performed to predict the electromagnetic voltage output and the bandwidth of the energy harvester. The simulation results coincided with the measured data. Significant broadband response is obtained experimentally and the maximum RMS power output is 40.2 mW at 0.45 g of excitation. Furthermore, the proposed structure showcasing the matched magnetic orientation is characterized by the binary parameters pair (d 0 , d) and the systematic parametric approach could contribute to the design and study of nonlinear broadband energy harvesters.

30 DIRECT ENERGY CONVERSION↗

Numerical simulations of onset and growth of Rayleigh–Taylor instability involving solids in converging geometry

Numerical simulation of Rayleigh–Taylor instabilities involving solids has been carried out in a spherically converging geometry. A solid shell is driven toward the center by high-pressure gas outside. Low-pressure gas inside the shell is then compressed, causing the solid shell to slow down and eventually bounce back. Here, simulation results show the absence of the onset condition unlike in the planar geometry equivalent. Results also show that disturbance growth seems to be strongly associated with the deformation direction instead of the acceleration direction. For example, when the interface is compressed in the cross-stream direction, the disturbance at the gas–solid interface grows even under the Rayleigh–Taylor stable situation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuum gyrokinetic simulations of edge plasmas in single-null geometries

The first continuum gyrokinetic calculations of electrostatic ion scale turbulence are presented for the case of a diverted tokamak geometry. The simulation model solves the long-wavelength limit of the full-F gyrokinetic equation for ion species coupled to the quasi-neutrality equation for electrostatic potential variations, where a fluid model is used for an electron response. Furthermore, in order to facilitate simulations of highly-anisotropic microturbulence in the presence of strong magnetic shear and a magnetic X-point, a numerical algorithm utilizing a locally field-aligned multiblock coordinate system has been developed and implemented in the 5D finite-volume code COGENT. In this approach, the toroidal direction is divided into blocks, such that within each block, the cells are field-aligned and a non-matching grid interface is allowed at block boundaries. The toroidal angle corresponds to the “coarse” field-aligned coordinate, whereas the poloidal cross section, comprised of the radial and poloidal directions, is finely gridded to resolve short-scale perpendicular turbulence structures and to support accurate re-mapping (interpolation) at block boundaries. The 5D simulations explore cross-separatrix ion scale turbulence in the presence of a self-consistent radial electric field and address the effects of magnetic-shear stabilization in the X-point region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SIMULATING PROTOSTELLAR JETS SIMULTANEOUSLY AT LAUNCHING AND OBSERVATIONAL SCALES

We present the first 2.5-dimensional magnetohydrodynamic (MHD) simulations of protostellar jets that include both the region in which the jet is launched magnetocentrifugally at scale lengths <0.1 AU and where the propagating jet is observed at scale lengths >10{sup 3} AU. These simulations, performed with the new adaptive mesh refinement MHD code AZEuS, reveal interesting relationships between conditions at the disk surface, such as the magnetic field strength, and direct observables such as proper motion, jet rotation, jet radius, and mass flux. By comparing these quantities with observed values, we present direct numerical evidence that the magnetocentrifugal launching mechanism is capable, by itself, of launching realistic protostellar jets.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiscale analysis of nonlinear systems using computational homology

This is a collaborative project between the principal investigators. However, as is to be expected, different PIs have greater focus on different aspects of the project. This report lists these major directions of research which were pursued during the funding period: (1) Computational Homology in Fluids - For the computational homology effort in thermal convection, the focus of the work during the first two years of the funding period included: (1) A clear demonstration that homology can sensitively detect the presence or absence of an important flow symmetry, (2) An investigation of homology as a probe for flow dynamics, and (3) The construction of a new convection apparatus for probing the effects of large-aspect-ratio. (2) Computational Homology in Cardiac Dynamics - We have initiated an effort to test the use of homology in characterizing data from both laboratory experiments and numerical simulations of arrhythmia in the heart. Recently, the use of high speed, high sensitivity digital imaging in conjunction with voltage sensitive fluorescent dyes has enabled researchers to visualize electrical activity on the surface of cardiac tissue, both in vitro and in vivo. (3) Magnetohydrodynamics - A new research direction is to use computational homology to analyze results of large scale simulations of 2D turbulence in the presence of magnetic fields. Such simulations are relevant to the dynamics of black hole accretion disks. The complex flow patterns from simulations exhibit strong qualitative changes as a function of magnetic field strength. Efforts to characterize the pattern changes using Fourier methods and wavelet analysis have been unsuccessful. (4) Granular Flow - two experts in the area of granular media are studying 2D model experiments of earthquake dynamics where the stress fields can be measured; these stress fields from complex patterns of 'force chains' that may be amenable to analysis using computational homology. (5) Microstructure Characterization - We extended our previous work on studying the time evolution of patterns associated with phase separation in conserved concentration fields. (6) Probabilistic Homology Validation - work on microstructure characterization is based on numerically studying the homology of certain sublevel sets of a function, whose evolution is described by deterministic or stochastic evolution equations. (7) Computational Homology and Dynamics - Topological methods can be used to rigorously describe the dynamics of nonlinear systems. We are approaching this problem from several perspectives and through a variety of systems. (8) Stress Networks in Polycrystals - we have characterized stress networks in polycrystals. This part of the project is aimed at developing homological metrics which can aid in distinguishing not only microstructures, but also derived mechanical response fields. (9) Microstructure-Controlled Drug Release - This part of the project is concerned with the development of topological metrics in the context of controlled drug delivery systems, such as drug-eluting stents. We are particularly interested in developing metrics which can be used to link the processing stage to the resulting microstructure, and ultimately to the achieved system response in terms of drug release profiles. (10) Microstructure of Fuel Cells - we have been using our computational homology software to analyze the topological structure of the void, metal and ceramic components of a Solid Oxide Fuel Cell.

30 DIRECT ENERGY CONVERSION↗

Trace impurity transport in multi-species plasmas with large particle fluxes

A burning fusion plasma has a large inwards flux of fuel and outwards flux of ash. Existing impurity transport theories do not account for a steady-state environment of such large fluxes. In this paper, we extend classical transport theory to account for a background of such fluxes. In a mainly two-ion species magnetized plasma, with oppositely directed density gradients maintained by oppositely directed sources of the two species, trace impurity ions are shown to align with the larger mass ions. This unexpected behavior is derived analytically and simulated numerically using the MITNS (Multiple-Ion Transport Numerical Solver) code. Overall, the result suggests a potential advantage of edge-fueled p-B11 fusion in extracting high-Z impurities, and possible applications in plasma-based separation methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast imaging of transients and coherent magnetohydrodynamic modes in DIII-D

A fast framing camera is used to image plasma waves and instabilities in the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] in unprecedented detail including tearing modes (TMs) and sawtooth crashes. To image core magnetohydrodynamic (MHD) activity, the fast camera detects visible bremsstrahlung emission {epsilon}{sub B} in moderate to high density plasmas. For coherent MHD activity such as TMs, high-resolution two-dimensional images of mode amplitude and phase are obtained by Fourier filtering each pixel's time series at the mode frequency. Images of m/n=2/1 TMs show that inside the q=2 surface, the camera measurements are in excellent agreement with an analytic model of a 2/1 island superimposed on the equilibrium {epsilon}{sub B} profile. Direct comparison of the measurements to a NIMROD simulation shows significant discrepancies, most likely due to artificially high-density diffusion used in the code for numerical stability. The first visible-light images of transient sawtooth crashes show the structure and location of the perturbed emission from an m=1 precursor oscillation and show that during the nonlinear crash phase the instability extends to more than half of the plasma minor radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A beam-membrane structure micromachined differential pressure flow sensor

A beam-membrane structure micromachined flow sensor is designed, depending on the principle of differential pressure caused by the mass flow, which is directly proportional to the square flow rate. The FSI (fluid structure interaction) characteristics of the differential pressure flow sensor are investigated via numerical analysis and analog simulation. The working mechanism of the flow sensor is analyzed depending on the FSI results. Then, the flow sensor is fabricated and calibrated. The calibration results show that the beam-membrane structure differential pressure flow sensor achieves ideal static characteristics and works well in the practical applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NUMERICAL SIMULATIONS OF RADIATIVE MAGNETIZED HERBIG-HARO JETS: THE INFLUENCE OF PRE-IONIZATION FROM X-RAYS ON EMISSION LINES

We investigate supersonic, axisymmetric magnetohydrodynamic jets with a time-dependent injection velocity by numerical simulations with the PLUTO code. Using a comprehensive set of parameters, we explore different jet configurations in the attempt to construct models that can be directly compared to observational data of microjets. In particular, we focus our attention on the emitting properties of traveling knots and construct, at the same time, accurate line intensity ratios and surface brightness maps. Direct comparison of the resulting brightness and line intensity ratios distributions with observational data of microjets shows that a closer match can be obtained only when the jet material is pre-ionized to some degree. A very likely source for a pre-ionized medium is photoionization by X-ray flux coming from the central object.

79 ASTRONOMY AND ASTROPHYSICS↗

Discrimination of correlated and entangling quantum channels with selective process tomography

The accurate and reliable characterization of quantum dynamical processes underlies efforts to validate quantum technologies, where discrimination between competing models of observed behaviors inform efforts to fabricate and operate qubit devices. We present a protocol for quantum channel discrimination that leverages advances in direct characterization of quantum dynamics (DCQD) codes. We demonstrate that DCQD codes enable selective process tomography to improve discrimination between entangling and correlated quantum dynamics. Numerical simulations show selective process tomography requires only a few measurement configurations to achieve a low false alarm rate and that the DCQD encoding improves the resilience of the protocol to hidden sources of noise. Lastly, our results show that selective process tomography with DCQD codes is useful for efficiently distinguishing sources of correlated crosstalk from uncorrelated noise in current and future experimental platforms.

97 MATHEMATICS AND COMPUTING↗

Preferential turbulence enhancement in two-dimensional compressions

When initially isotropic three-dimensional (3D) turbulence is compressed along two dimensions, the compression supplies energy directly to the flow components in the compressed directions, while the flow component in the noncompressed direction experiences the effects of compression only indirectly through the nonlinearity of the hydrodynamic equations. Here we present our study of such 2D compressions using numerical simulations. For initially isotropic turbulence, we find that the nonlinearity can be insufficient to maintain isotropy, with the energy components parallel to the compression coming to dominate the turbulent energy, with a number of consequences. Among these are the possibilities for stronger and more easily sustained growth of turbulent energy than in 3D compressions and for an increasing turbulent Mach number even in a compression without thermal losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monte-Carlo Neutrino Transport in Neutron Star Merger Simulations

Gravitational waves and electromagnetic signals from merging neutron star binaries provide valuable information about the the properties of dense matter, the formation of heavy elements, and high-energy astrophysics. To fully leverage observations of these systems, we need numerical simulations that provide reliable predictions for the properties of the matter unbound in these mergers. An important limitation of current simulations is the use of approximate methods for neutrino transport that do not converge to a solution of the transport equations as numerical resolution increases, and thus have errors that are impossible to quantify. Here, we report on a first simulation of a binary neutron star merger that directly solves the transport equations using Monte-Carlo techniques. We demonstrate that a computationally cheap Monte-Carlo transport can be implemented without ill effects from sampling noise. We apply Monte-Carlo transport to an unequal mass neutron star binary merger up to 5ms past merger, and report on the properties of the matter and neutrino outflows. Finally, we compare our results to the output of our best approximate `M1' transport scheme, demonstrating that an M1 scheme that carefully approximates the neutrino energy spectrum only leads to ~10% uncertainty in the composition and velocity of the ejecta, and ~20% uncertainty in the electron (anti)neutrino luminosities and energies. Here, the most significant disagreement found between M1 and Monte-Carlo results is a factor of ~2 difference in the luminosity of heavy-lepton neutrinos.

79 ASTRONOMY AND ASTROPHYSICS↗