Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID INJECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow Into Turbine Rim Seals

Abstract Overlapping features are commonly used as rim seals between stationary and rotating components in a turbine stage. These rim seals are used to prevent main gas path ingestion to the wheelspace cavity, which reduces the lifespan of critical engine components such as the turbine disk. In addition to the overlapping features, purge flow, diverted from the compressor, is injected into the rim cavity to act as an airflow sealing mechanism. Previous research identified that in addition to the purge flow in the rim cavity, cooling flow from the vane trailing edge (VTE) is ingested into the rim seal cavity carrying the potential to cool components in the wheelspace. These previous findings, however, were not able to distinctly separate purge from VTE cooling flows, which is the contribution of this paper based on uniquely using two different tracer gases. A one-stage test turbine operating at engine-relevant conditions and consisting of real engine hardware was used to validate and quantify the ingestion of the VTE flow by independently seeding the purge and VTE flows with two different tracer gases. Experimental results show the presence of VTE flow in the rim seal throughout all purge flowrates evaluated. Circumferential variation of VTE flow was also studied both experimentally and computationally using a computational fluid dynamics model. Results showed that ingested VTE flow can reduce the detrimental effect of hot gas ingestion particularly at higher purge flowrates.

Engineering↗

Collaborative Research: Enabling multi-scale studies of magnetic reconnection with interpretable data-driven models

The development of accurate reduced descriptions and improved closures for magnetic reconnection is an important and a long‐standing challenge in plasma physics. The four‐fluid approach, and associated closures, that were investigated have the potential to improve the accuracy of plasma fluid models, capturing physical effects which would otherwise require a kinetic description. If successful, this approach could have an important impact for the modeling of laboratory and space plasmas. The major goals of this project were to develop new machine learning (ML) tools based on sparse and symbolic regression techniques, and to extract interpretable and generalizable reduced models (e.g., in the form of partial differential equations - PDEs) from data generated by first principles plasma simulations. Preserving interpretability of such data‐driven models is key to addressing the long‐standing theoretical and numerical challenges. Prior proof‐of‐principle studies have demonstrated the enormous potential of this approach, by recovering the well‐established hierarchy of plasma equations (from Vlasov to MHD) from data produced by particle‐in‐cell (PIC) simulations. Our goal in this project was to extend and apply these new tools to construct better kinetic closures for magnetic reconnection; to derive better models of particle injection and acceleration by this fundamental plasma process; and to use this understanding to accelerate the development of multi‐scale plasma algorithms. While our immediate focus was on the problem of magnetic reconnection, the tools that were will developed are general and applicable to other areas of plasma physics, and more broadly to many‐body phenomena. We anticipate that the development of these multi‐scale models will have a significant impact across different areas of plasma science, from fusion to space and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of high-energy particles on accretion flows onto a supermassive black hole

We study the effects of high-energy particles (HEPs) on the accretion flows onto a supermassive black hole and luminosities of escaping particles such as protons, neutrons, gamma rays, and neutrinos. We formulate a one-dimensional model of the two-component accretion flow consisting of thermal particles and HEPs, supposing that some fraction of the released energy is converted to the acceleration of HEPs. The thermal component is governed by fluid dynamics while the HEPs obey the moment equations of the diffusion-convection equation. By solving the time evolution of these equations, we obtain advection-dominated flows as the steady state solutions. The effects of the HEPs on the flow structures turn out to be small even if the pressure of the HEPs dominates over the thermal pressure. For a model in which the escaping protons take away almost all the energy released, the HEPs have a large enough influence to make the flow have a Keplerian angular velocity at the inner region. We calculate the luminosities of the escaping particles for these steady solutions. The escaping particles can extract the energy from about 10{sup −4} M-dot c{sup 2} to 10{sup −2} M-dot c{sup 2}, where M-dot is the mass accretion rate. The luminosities of the escaping particles depend on parameters such as the injection Lorentz factors, the mass accretion rates, and the diffusion coefficients. We also discuss some implications on the relativistic jet production by the escaping particles.

79 ASTRONOMY AND ASTROPHYSICS↗

EERC Final Topical Report – Findings on Subtask 3.2 – Produced Water Management Through Geologic Homogenization, Conditions, and Reuse

The Energy & Environmental Research Center (EERC) was awarded a contract by the North Dakota Industrial Commission (NDIC) Oil and Gas Research Program (NDIC No. G-051-101) to conduct a study on the recycling of water used in oil and gas operations, also known as produced water, from oil- and gas-producing regions of North Dakota as directed by Section 19 of North Dakota House Bill 1014. This final report provides a compilation of results of the study, which include regulatory, scientific, technological, and feasibility methods and considerations associated with North Dakota produced water management. The report provides a synopsis of this project’s previously submitted produced water assessment report entitled “Produced Water Management and Recycling Options in North Dakota” (Energy & Environmental Research Center, 2020), with updated values provided as appropriate. The report provides the results from the investigation of a novel produced water management strategy, referred to as geologic homogenization, conditioning, and reuse (GHCR), which aims to use a subsurface geologic formation as a natural medium for managing produced water recycling and reuse. Water management is a significant technical and economic challenge for sustainable oil and gas production, and water volumes are intrinsically linked to oil production volumes. North Dakota oil production rose to over 1.5 million barrels (MMbbl)/day in 2019, and despite a downturn in oil price in early 2020, North Dakota oil production has recovered to 1.1 MMbbl/day as of August 2021. Bakken petroleum system development between 2008 and 2020 has resulted in a nearly fourfold increase in produced water volumes to 642 MMbbl/yr in 2020 after peaking at 740 MMbbl/yr in 2019 and a fivefold increase in saltwater disposal (SWD) volumes to 565 MMbbl/yr in 2020 after a peak of 682 MMbbl/yr in 2019. Produced water and SWD volumes are forecasted to double by 2030. SWD is the primary method of produced water management used in North Dakota, with approximately 95% of the SWD volume occurring through subsurface injection into sandstones of the Dakota Group (Dakota). Localized pressurization of the Dakota resulting from SWD and projected increases in produced water volumes could impact the economics of North Dakota oil production. As a result, there is an emerging need to pursue alternative produced water management approaches, including recycling and reuse. While produced water recycling is not yet widespread, commercial operators are making strides in overcoming the technical challenges of using high salinity produced water in completion operations (Marathon Oil, 2020). As water management continues to be a key focal point in companies’ environmental, social, and governance (ESG) initiatives, focus on water management, including recycling, will likely continue to increase. Laboratory column testing, field sample collection, geologic modeling and numerical simulation, and techno-economic analysis all indicate that GHCR could feasibly be implemented as a potential water management option. Laboratory column testing and field sample collection indicate that the Inyan Kara sandstone and native formation fluid are capable of homogenizing with the Bakken produced water to a point where the fluid composition appears to stabilize. Extracting that stabilized fluid could be considered homogeneous and capable of providing individual batches of hydraulic fracturing fluid. Numerical simulation results indicate that extraction of fluids from the Inyan Kara in a GHCR implementation scenario is capable of reducing formation pressure, which would help ease localized pressurization of the Inyan Kara and extend the available capacity for nearby existing SWD wells. Economic analysis indicates that there are scenarios where GHCR implementation can be a competitive or even lower-cost option than a conventional water management approach. Site-specific conditions will dictate the economic potential of GHCR, but potentially attractive sites for GHCR implementation will be those that are located above a pressurized zone of the Inyan Kara, need six or more Bakken infill wells, and face high costs for conventional SWD and/or freshwater. Based on the regulatory review, drilling into the Inyan Kara for SWD and to harness as a source water for industrial use have precedent in North Dakota, and a workable regulatory solution for GHCR seems likely. However, restrictions in the state regarding surface storage and transport of produced fluids may limit some activities, which will affect how GHCR could ultimately be implemented. In summary, this study reveals pursuing GHCR can be a viable approach to water management in North Dakota. The GHCR concept addresses some of the challenges that hinder the more traditional approaches to recycling in the industry. Furthermore, an assessment of the current landscape of water management within the state reveals the ongoing trend of increasing volumes of produced water and SWD. Projections reveal that the volumes of produced water that need to be managed are expected to double over the next decade (Energy & Environmental Research Center, 2020). With the continued development of the Bakken and continuing driving factors related to ESG initiatives, implementing a practice such as GHCR is a feasible approach to adding recycling of produced water to industry within the state. This subtask was cofunded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission Oil and Gas Research Program. References Energy & Environmental Research Center, 2020, Produced water management and recycling options in North Dakota: Final Report for North Dakota Legislative Management Energy Development and Transmission Committee and North Dakota Industrial Commission. Marathon Oil, 2020, Sustainability report: https://cdn.sanity.io/files/ghcnw9z2/website/ 91744eb6ef8fbe59505a911c6b8d2e8dd9a537fa.pdf?dl (accessed November 2021).

02 PETROLEUM↗

The impacts of effective stress and CO 2 sorption on the matrix permeability of shale reservoir rocks [The impacts of CO 2 sorption and effective stress on the matrix permeability of shale reservoir rocks]

We assess the impacts of effective stress and CO 2 sorption on the bedding-parallel matrix permeability of the Utica shale through pressure pulse-decay experiments. We first measure permeability using argon at relatively high (14.6 MPa) and low (2.8 MPa) effective stresses to assess both pressure dependence and recoverability. We subsequently measure permeability using supercritical CO 2 and again using argon to assess changes due to CO 2 sorption. We find that injection of both argon and supercritical CO 2 reduces matrix permeability in distinct fashion. Samples with permeability higher than 10 –20 m 2 experience a large permeability reduction after treatment with argon, but a minor change after treatment with supercritical CO 2 . However, samples with permeability lower than this threshold undergo a slight change after treatment with argon, but a dramatic reduction after treatment with supercritical CO 2 . These results indicate that effective stress plays an important role in the evolution of relatively permeable facies, while CO 2 sorption dominates the change of ultra-low permeability facies. The permeability reduction due to CO 2 sorption varies inversely with initial permeability, which suggests that increased surface area from hydraulic stimulation with CO 2 may be counteracted by sorption effects in ultra-low permeability facies. As a result, we develop a conceptual model to explain how CO 2 sorption induces porosity reduction and volumetric expansion to constrict fluid flow pathways in shale reservoir rocks.

58 GEOSCIENCES↗

Challenges in Implementing a Multi-Partnership Geothermal Power Plant

The UND-CLR binary geothermal power plant project is a piggyback operation on a secondary-recovery water-flood project in the Cedar Hills oil field in the Williston Basin. Two open-hole horizontal wells at 2,300 m and 2,400 m depths with lateral lengths of 1,290 m and 860 m produce water at a combined flow of 51 l s -1 from the Lodgepole formation (Miss.) for injection into the Red River formation (Ordovician). The hydrostatic head for the Lodgepole is at ground surface and the pumps, which are set at 650 m depth, have run continuously since 2009. Water temperature at the wellhead is 103 °C and CLR passes the water through two large air-cooled heat exchangers prior to injection. In all aspects, the CLR water flood project is ideal for demonstration of electrical power production from a low-temperature geothermal resource. However, implementation of the project from concept to power production was analogous to breaking trail in deep snow in an old growth forest. There were many hidden bumps, detours, and in some instances immoveable barriers. Problems with investors, cost share, contracts with CLR, resistance from local industry, cost of installation, delays by the ORC supplier, and the North Dakota climate all caused delays and setbacks. Determination and problem solving by the UND team eventually overcame most setbacks, and in April 2016, the site began generating power. Figure 1: Schematic of the water supply well at the UND CLR binary geothermal power plant REFERENCES Williams, Snyder, and Gosnold, 2016, Low Temperature Projects Evaluation and Lesson Learned, GRC Transactions, Vol. 40, 203-210 Gosnold, LeFever, Klenner, Mann, Salehfar, and Johnson, 2010, Geothermal Power from Coproduced Fluids in the Williston Basin, GRC Transactions, Vol. 34, 557-560

Coproduced, geothermal, binary power↗

THE PROPAGATION OF RELATIVISTIC JETS IN EXTERNAL MEDIA

Relativistic jets are ubiquitous in astrophysical systems that contain compact objects. They transport large amounts of energy to large distances from the source and their interaction with the ambient medium has a crucial effect on the evolution of the system. The propagation of the jet is characterized by the formation of a shocked 'head' at the front of the jet which dissipates the jet's energy and a cocoon that surrounds the jet and potentially collimates it. We present here a self-consistent, analytic model that follows the evolution of the jet and its cocoon, and describes their interaction. We show that the critical parameter that determines the properties of the jet-cocoon system is the dimensionless ratio between the jet's energy density and the rest-mass energy density of the ambient medium. This parameter, together with the jet's injection angle, also determines whether the jet is collimated by the cocoon or not. The model is applicable to relativistic, unmagnetized jets on all scales and may be used to determine the conditions in active galactic nucleus (AGN) jets as well as in gamma-ray bursts (GRBs) or microquasars. It shows that AGN and microquasar jets are hydrodynamically collimated due to the interaction with the ambient medium, while GRB jets can be collimated only inside a star and become uncollimated once they break out.

79 ASTRONOMY AND ASTROPHYSICS↗

A computational investigation of diesel and biodiesel combustion and NOx formation in a light-duty compression ignition engine

Diesel and biodiesel combustion in a multi-cylinder light duty diesel engine were simulated during a closed cycle (from IVC to EVO), using a commercial computational fluid dynamics (CFD) code, CONVERGE, coupled with detailed chemical kinetics. The computational domain was constructed based on engine geometry and compression ratio measurements. A skeletal n-heptane-based diesel mechanism developed by researchers at Chalmers University of Technology and a reduced biodiesel mechanism derived and validated by Luo and co-workers were applied to model the combustion chemistry. The biodiesel mechanism contains 89 species and 364 reactions and uses methyl decanoate, methyl-9- decenoate, and n-heptane as the surrogate fuel mixture. The Kelvin-Helmholtz and Rayleigh-Taylor (KH-RT) spray breakup model for diesel and biodiesel was calibrated to account for the differences in physical properties of the fuels which result in variations in atomization and spray development characteristics. The simulations were able to capture the experimentally observed pressure and apparent heat release rate trends for both the fuels over a range of engine loads (BMEPs from 2.5 to 10 bar) and fuel injection timings (from 0° BTDC to 10° BTDC), thus validating the overall modeling approach as well as the chemical kinetic models of diesel and biodiesel surrogates. Moreover, quantitative NOx predictions for diesel combustion and qualitative NOx predictions for biodiesel combustion were obtained with the CFD simulations and the in-cylinder temperature trends were correlated to the NOx trends.

Wang, Zihan↗

Machine-learning identification of the variability of mean velocity and turbulence intensity for wakes generated by onshore wind turbines: Cluster analysis of wind LiDAR measurements

Light detection and ranging (LiDAR) measurements of isolated wakes generated by wind turbines installed at an onshore wind farm are leveraged to characterize the variability of the wake mean velocity and turbulence intensity during typical operations, which encompass a breadth of atmospheric stability regimes and rotor thrust coefficients. The LiDAR measurements are clustered through the k-means algorithm, which enables identifying the most representative realizations of wind turbine wakes while avoiding the imposition of thresholds for the various wind and turbine parameters. Considering the large number of LiDAR samples collected to probe the wake velocity field, the dimensionality of the experimental dataset is reduced by projecting the LiDAR data on an intelligently truncated basis obtained with the proper orthogonal decomposition (POD). The coefficients of only five physics-informed POD modes are then injected in the k-means algorithm for clustering the LiDAR dataset. The analysis of the clustered LiDAR data and the associated supervisory control and data acquisition and meteorological data enables the study of the variability of the wake velocity deficit, wake extent, and wake-added turbulence intensity for different thrust coefficients of the turbine rotor and regimes of atmospheric stability. Furthermore, the cluster analysis of the LiDAR data allows for the identification of systematic off-design operations with a certain yaw misalignment of the turbine rotor with the mean wind direction.

17 WIND ENERGY↗

Instability seeding mechanisms due to internal defects in inertial confinement fusion targets

Performance degradation in laser-driven inertial confinement fusion (ICF) implosions is caused by several effects, one of which is Rayleigh–Taylor instability growth. Defects in ICF targets, such as internal voids and surface roughness, create instability seeds in the shell as shocks propagate through the target. A comprehensive understanding of seeding mechanisms is essential to characterize the impact of target defects on inflight shell integrity and mass injection into the central, lower-density vapor region. An analysis of early-time behavior of both single-mode shell mass modulations and isolated voids is performed by examining the evolution of the acoustic waves launched by these target imperfections. A systematic study of localized perturbation growth as a function of defect placement and size is presented. Furthermore, the use of low-density ablator materials (such as foams) is suggested as a potential mitigation strategy to improve target robustness against the impact of defect-initiated growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Fe(II) Content in Olivine Carbonation in Wet Supercritical CO2

Basalt geologic reservoirs are targeted for carbon storage because they are abundant in divalent silicates such as olivine ((Mg,Fe)2SiO4) that can carbonate to permanently trap CO2. At reservoir conditions, CO2 is a supercritical fluid that contains dissolved H2O, which adsorbs to minerals as nanometer-thin films. In this study, the role of Fe(II) in the thin H2O film carbonation of olivine was investigated using in situ high pressure infrared spectroscopy and ab initio thermodynamic calculations. Experiments were performed at 50 °C and 90 bar in both scCO2 and scCO2 with 1% H2 at a relative humidity of 79% on synthetic forsterite, fayalite, and two Mg-Fe mixture olivines (MgxFe1-x)2SiO4 (x = 0.33 and 0.66). Carbonation rates and extents are lower with increasing concentrations of Fe(II) in the olivine, but the addition of 1% H2 increases carbonation in Fe(II)-rich olivines. These trends are explained according to the dependencies of olivine acidic solubilities, carbonate precipitation equilibria, and dissolution/growth kinetics on Fe(II) content, and by considering that Fe(II)-rich olivines can undergo competing oxidation reactions by O2 and H2O and Fe(III)-containing oxides. Given that CO2 injected into the subsurface will be relatively oxic, the oxidation of Fe(II)-rich olivines could impact their carbonation potential.

Wood, Cecelia E.↗

Modeling of small tungsten dust grains in EAST tokamak with NDS-BOUT ++

In order to investigate the transport of small dusts as well as their evolution property along their trajectories, the NDS module is developed under the BOUT++ framework, a highly desirable C++ code package to perform parallel plasma fluid simulations with an arbitrary number of equations in three-dimensional curvilinear coordinates. Due to the severe dust ablation in fusion plasmas, the dust size would decrease from micrometer to nanometer, resulting in impurities. Small dusts in the simulations here are specified as tungsten spheres with the radii on or below the order of submicrometer. The Rayleigh limit is included in the charging process when the dust is ablated to the droplet phase. The simulation results from the NDS module show that a 200 nm radius spherical tungsten dust originated from upper divertor region of EAST Tokamak is ablated completely due to the intense heating from the incoming plasma inside the core region, well consistent with the CCD footage of EAST shot # 81459. Furthermore it is found that the magnetic field dominates the dust transport when the dust radius is below 100 nm during the ablation along the trajectory. Our simulations predict that a 10 nm radius spherical tungsten dust injected from the inner midplane is well constrained by the magnetic field, and it reaches the inner divertor target with a velocity on the order of km/s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coagulation of dust grains in the plasma of an RF discharge in argon

Results are presented from experimental studies of coagulation of dust grains of different sizes injected into a low-temperature plasma of an RF discharge in argon. A theoretical model describing the formation of dust clusters in a low-temperature plasma is developed and applied to interpret the results of experiments on the coagulation of dust grains having large negative charges. The grain size at which coagulation under the given plasma conditions is possible is estimated using the developed theory. The theoretical results are compared with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kootenai River Nutrient Dosing System and N-P Consumption: Year 2008.

In early 2006 we designed and built low energy consumption, pump-operated system, for dosing of the liquid nutrient in the summer 2006 season. This operated successfully, and the system was used again during the 2007 and 2008 seasons for dosing. During the early winter period, 2008, laboratory tests were made of the liquid nutrient pump system, and it was noted that small amounts of air were being entrained on the suction side of the pump, during conditions when the inlet pressure was low. It was believed that this was the cause of diurnal fluctuations in the flow supplied, characteristic of the 2007 year flow data. Replacement of '0' rings on the inlet side of the pumps was the solution to this problem, and when tested in the field during the summer season, the flow supplied was found to be stable. A decision was made by the IKERT committee at the meeting of 20th to 21st May 2008 (held in Coeur d'Alene, Idaho) to use an injection flow rate of liquid fertilizer (polyammonium phosphate 10-34-0) to achieve a target phosphorus concentration of 3.0 {micro}g/L, after complete mixing in the river. This target concentration was the same as that used in 2006 and 2007. The proposed starting date was as early as possible in June 2008. Plans were made to measure the dosing flow in three ways. Two of the three methods of flow measurement (1 and 2 below) are inter-dependent. These were: (1) Direct measurement of flow rate by diverting dosing flow into a 1000 mL volume standard flask. The flow rate was computed by dividing the flask volume by the time required to fill the flask. This was done a few times only during the summer period. (2) Adjusting the flow rate reading of the Gamma dosing pump using the 'calibration' function to achieve agreement with the flow rate computed by method 1 above. (3) Direct measurement by electrical signal from conductive fluid passing through a magnetic field (Seametrics meter, as used in previous years). Values were recorded every 4 minutes by a data-logger. This instrument has been shown to be reliable, and in agreement with method 1 to within the expected uncertainty (within 2%). Liquid nutrients were delivered to the site in late May, and system testing was done the same day. High concentrations of suspended sediment in the water column, as indicated by shallow Secchi depth readings, were present in the river in the last part of May, into June. A plan was made to delay the start up of nutrient addition to a date later than 1st June, because the aquatic productivity was almost certainly to be compromised by insufficient light availability. Daily monitoring of Secchi depths was done, showing declining turbidity in early June. A decision was made to start the system on 15th June, by which time conditions were good.

13 HYDRO ENERGY↗

Large Eddy Simulation of Autoignition Transients in a Model Diesel Injector Configuration

Developing an improved understanding of transient mixing and combustion processes inherent in diesel injection is an important element in the design of advanced engines. This paper provides a detailed analysis of these processes using an idealized benchmark configuration designed to facilitate precise comparisons between different models and numerical methods. The computational domain is similar to the Engine Combustion Network (www.sandia.gov/ECN) Spray-A injector with n-dodecane as the fuel. Quantified idealizations are made in the treatment of boundary conditions to eliminate ambiguities and unknowns associated with the actual injector(s) used in the experiment. These ambiguities hinder comparisons aimed at understanding the accuracy of different models and the coupled effects of potential numerical errors. Prior to understanding the impact of injector imperfections on their performance, it is first necessary to understand how models perform in a well-controlled environment with well-defined boundary conditions. Here, we focus on the latter while accurately matching the operating conditions used in the experiments. Relevant high-pressure phenomena are treated with real-fluid thermodynamics and transport for multicomponent mixtures. A highly resolved calculation is performed to study both scalar-mixing and initiation of combustion. Results are assembled into a database that can facilitate one-to-one comparisons between codes. The combined set of results is analyzed to provide physical insights related to localized broadband transient mixing and combustion processes that are typically not available from experiments.

Hakim, Layal↗

Control of internal transport barriers in magnetically confined tokamak burning plasmas

The initiation, termination, and control of internal transport barriers associated with E × B flow shear near local minima of magnetic shear are examined for burning plasmas to determine if the positive feedback loops between profiles, instability, transport, and flow shear operate in regimes with fusion self-heating. A five-field transport model for the evolution of profiles of density, ion and electron temperature, ion and electron fluctuations, and radial electric field is utilized to examine the efficacy of controls associated with external inputs of heat and particles, including neutral beam injection, RF, pellets, and gas puffing. The response of the plasma to these inputs is studied in the presence of self-heating. The latter is affected by the external inputs and their modification of profiles and is, therefore, not an external control. Provided sufficient external power is applied, internal transport barriers can be created and controlled, both in ion and electron channels. Barrier control is sensitive to the locations of power deposition and pellet ablation, as well as temporal sequencing of external inputs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of accuracy and convergence of numerical coupling approaches for poroelasticity benchmark problems

Accurate modeling of subsurface flow and transport processes is vital as the prevalence of subsurface activities such as carbon sequestration, geothermal recovery, and nuclear waste disposal increases. Computational modeling of these problems leverages poroelasticity theory, which describes coupled fluid flow and mechanical deformation. Although fully coupled monolithic schemes are accurate for coupled problems, they can demand significant computational resources for large problems. In this work, a fixed stress scheme is implemented into the Sandia Sierra Multiphysics toolkit. Two implementation methods, along with the fully coupled method, are verified with one-dimensional (1D) Terzaghi, 2D Mandel, and 3D Cryer sphere benchmark problems. The impact of a range of material parameters and convergence tolerances on numerical accuracy and efficiency was evaluated. Overall the fixed stress schemes achieved acceptable numerical accuracy and efficiency compared to the fully coupled scheme. However, the accuracy of the fixed stress scheme tends to decrease with low permeable cases, requiring the finer tolerance to achieve a desired numerical accuracy. For the fully coupled scheme, high numerical accuracy was observed in most of cases except a low permeability case where an order of magnitude finer tolerance was required for accurate results. Finally, a two-layer Terzaghi problem and an injection–production well system were used to demonstrate the applicability of findings from the benchmark problems for more realistic conditions over a range of permeability. Simulation results suggest that the fixed stress scheme provides accurate solutions for all cases considered with the proper adjustment of the tolerance. Furthermore, this work clearly demonstrates the robustness of the fixed stress scheme for coupled poroelastic problems, while a cautious selection of numerical tolerance may be required under certain conditions with low permeable materials.

58 GEOSCIENCES↗

AREA 2: Novel Materials for Robust Repair of Leaky Wellbores in CO 2 Storage Formations

The potential leakage of hydrocarbon fluids or CO 2 out of subsurface formations through wells with fractured cement or debonded microannuli is a primary concern in oil and gas production and CO 2 storage. The presence of fractures in a cement annulus with apertures on the order of 10–300 microns can pose a significant leakage danger with effective permeability in the range of 0.1–1 mD (millidarcy). Leakage pathways with small apertures are often difficult to repair using conventional oilfield cement, thus a low-viscosity sealant that can be easily placed into these fractures while providing an effective seal is desired. The development of a novel application using pH-triggered polymeric sealants could potentially be the solution to plugging these fractures and that was the research aim of this study. The application is based on the transport and reaction of a low-pH poly(acrylic acid) polymer through fractures in strongly alkaline cement. The pH-sensitive microgels viscosify upon neutralization with cement to become highly swollen gels with substantial yield stress that can block fluid flow. Experiments in a cement fracture determined the effects of the viscosification and gel deposition via real-time visual observation and measurements of pressure gradient and effluent pH. While the pH-triggered gelling mechanism and rheology measurements of the neutralized polymer gel show promising results, the polymer solution in contact with cement undergoes an undesirable reaction known as polymer syneresis. Syneresis is caused by the release of calcium cation from cement that collapses the polymer network. Syneresis produces an unstable calcium-precipitation byproduct that is detrimental to the strength and stability of the gel in place. As a result, gel-sealed leakage pathways that subjected to various degrees of syneresis often failed to hold back pressures. Several chemicals were studied to inhibit polymer syneresis and tested for pretreatment of cement cores to remove calcium and prevent syneresis during polymer placement. A chelating agent, sodium triphosphate (Na 5 P 3 O 10 ), was found to successfully eliminate syneresis without compromising the injectivity of polymer solution during placement. Polymer gel strength is determined by recording the maximum holdback pressure gradients during liquid breakthrough tests after various periods of pretreatment and polymer shut-in time. Cores pretreated with Na 5 P 3 O 10 successfully held up to an average of 80 psi/ft, which is significantly greater than the expected threshold value of about 0.1-5 psi/ft required to prevent flow in a typical CO 2 leakage scenario. The use of such inexpensive, pH-triggered poly-acrylic acid polymer allows long-term robust seal of leaky wellbores under high pH conditions.

01 COAL, LIGNITE, AND PEAT↗