Search NASA⌕ Search

SEARCH · Search NASA

Results for “LABORATORY EQUIPMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Air Traffic Management Technology Demostration Phase 1 (ATD) Interval Management for Near-Term Operations Validation of Acceptability (IM-NOVA) Experiment

The Interval Management for Near-term Operations Validation of Acceptability (IM-NOVA) experiment was conducted at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) in support of the NASA Airspace Systems Program's Air Traffic Management Technology Demonstration-1 (ATD-1). ATD-1 is intended to showcase an integrated set of technologies that provide an efficient arrival solution for managing aircraft using Next Generation Air Transportation System (NextGen) surveillance, navigation, procedures, and automation for both airborne and ground-based systems. The goal of the IMNOVA experiment was to assess if procedures outlined by the ATD-1 Concept of Operations were acceptable to and feasible for use by flight crews in a voice communications environment when used with a minimum set of Flight Deck-based Interval Management (FIM) equipment and a prototype crew interface. To investigate an integrated arrival solution using ground-based air traffic control tools and aircraft Automatic Dependent Surveillance-Broadcast (ADS-B) tools, the LaRC FIM system and the Traffic Management Advisor with Terminal Metering and Controller Managed Spacing tools developed at the NASA Ames Research Center (ARC) were integrated into LaRC's Air Traffic Operations Laboratory (ATOL). Data were collected from 10 crews of current 757/767 pilots asked to fly a high-fidelity, fixed-based simulator during scenarios conducted within an airspace environment modeled on the Dallas-Fort Worth (DFW) Terminal Radar Approach Control area. The aircraft simulator was equipped with the Airborne Spacing for Terminal Area Routes (ASTAR) algorithm and a FIM crew interface consisting of electronic flight bags and ADS-B guidance displays. Researchers used "pseudo-pilot" stations to control 24 simulated aircraft that provided multiple air traffic flows into the DFW International Airport, and recently retired DFW air traffic controllers served as confederate Center, Feeder, Final, and Tower controllers. Analyses of qualitative data revealed that the procedures used by flight crews to receive and execute interval management (IM) clearances in a voice communications environment were logical, easy to follow, did not contain any missing or extraneous steps, and required the use of an acceptable workload level. The majority of the pilot participants found the IM concept, in addition to the proposed FIM crew procedures, to be acceptable and indicated that the ATD-1 procedures could be successfully executed in a nearterm NextGen environment. Analyses of quantitative data revealed that the proposed procedures were feasible for use by flight crews in a voice communications environment. The delivery accuracy at the achieve-by point was within +/-5 sec, and the delivery precision was less than 5 sec. Furthermore, FIM speed commands occurred at a rate of less than one per minute, and pilots found the frequency of the speed commands to be acceptable at all times throughout the experiment scenarios.

Kibler, Jennifer L.↗

INTERFUEL: FY22 Federal Fleet Reporting [Slides]

This presentation presents an overview of and timeline for coming changes to how federal agencies with motor vehicles will submit required information about the motor vehicles, fueling centers, and electric vehicle supply equipment (EVSE) inventory through the Federal Automotive Statistical Tool (FAST). The presentation provides information on changes throughout the FAST system as well as changes planned for implementation in FY 2023 and later. This presentation is intended for delivery via WebEx/GoToMeeting at the September 14, 2022 meeting of the DOE-sponsored INTERFUEL working group. FAST is a web-based information management tool developed and maintained by Idaho National Laboratory and funded by GSA's Office of Government-wide Policy and DOE's Federal Energy Management Program.

99 GENERAL AND MISCELLANEOUS↗

Pyroprocessing of fast flux test facility nuclear fuel

Used nuclear fuel from the Fast Flux Test Facility (FFTF) was recently transferred to the Idaho National Laboratory and processed by pyroprocessing in the Fuel Conditioning Facility. Approximately 213 kg of uranium from sodium-bonded metallic FFTF fuel was processed over a one year period with the equipment previously used for the processing of EBR-II used fuel. The peak burnup of the FFTF fuel ranged from 10 to 15 atom% for the 900+ chopped elements processed. Fifteen low-enriched uranium ingots were cast following the electrorefining and distillation operations to recover approximately 192 kg of uranium. A material balance on the primary fuel constituents, uranium and zirconium, during the FFTF campaign will be presented along with a brief description of operating parameters. Recoverable uranium during the pyroprocessing of FFTF nuclear fuel was greater than 95% while the purity of the final electro-refined uranium products exceeded 99%. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In-Cell Deployment and First Use of Digital Image Correlation for In-Situ Strain Analysis of Irradiated Nuclear Fuel Rods During LOCA Transient

Digital image correlation (DIC) is a noncontact, optical method increasingly used across industries and research environments for acquiring multidimensional strain data. At Oak Ridge National Laboratory’s (ORNL’s) Severe Accident Test Station (SATS), DIC has been extensively applied to study the thermomechanical response of nuclear fuel claddings, yielding fundamental insights into material behavior. However, these efforts have focused exclusively on unirradiated materials and relied on the SATS out-of-cell infrastructure. Efforts over the past two years have been made to extend these capabilities to ORNL’s Irradiated Fuels Examination Laboratory SATS system within the hot-cells to enable testing of irradiated fuel cladding materials. Integrating DIC into the hot-cell SATS infrastructure presents unique challenges, including enabling remote operation of optical equipment and adapting auxiliary hot-cell systems for DIC implementation. This report discusses design, stand-up testing, and application of DIC to an irradiated nuclear fuel cladding segment. A DIC testing rig was successfully built and validated out-of-cell through extensive surrogate tests and calibrations. The rig and specialized DIC furnace were installed in the hot-cell, and a DIC test was successfully conducted. Results from that test correspond to expectations for Zr-based alloys and showed similar uncertainties compared to out-of-cell tests.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

California Energy Systems for the 21st Century (CES-21) Program, CRADA TC02200 (Final Report)

The following report representsthe culmination of a five-year Cybersecurity Research and Development (R&D) program performed by California’s Investor-Owned Utilities (IOUs) and Lawrence Livermore National Laboratory (LLNL) and funded by the IOUs’ electricity ratepayers as authorized by California Legislation and the California Public Utilities Commission (CPUC). The cybersecurity R&D, which was intensely technical in nature, was broken into three major workstreams: 1. The development of a modeling & simulation platform, to explore the potential effects of various threat and response scenarios at grid scale; 2. The establishment of a physical testbed with separate substation instances from each of the IOUs, to evaluate threats and responses on actual substation equipment; 3. The development of a research package consisting of several capabilities to support the industry’s evolution towards automated threat response and other next-generation cybersecurity techniques Throughout the program, there was extensive collaboration between the program team and national laboratories, federal departments, academic institutions and industry organizations. Several of the tools developed through the program have been made available to the open source community, to enable faster adoption and continued development of important cybersecurity capabilities. While this program began to develop much of the foundation for automated threat response, much work remains to be done, and this report recommends a series of next steps. While the Executive Summary below has been simplified as much as possible, the very technical nature of the subject matter would make further reduction difficult without causing meaning to be lost. Due to the sensitive nature of the research, some topics are intentionally covered at a high level to protect the research and therefore the electric grid and customers of California and the Nation. For further detail, clarification or questions we suggest discussion with the program team.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Production of heavy and superheavy neutron-rich nuclei in transfer reactions

The problem of production and study of heavy neutron-rich nuclei has been intensively discussed during recent years. Many reasons arouse a great interest in this problem. The present limits of the upper part of the nuclear map are very close to the {beta} stability line while the unexplored area of heavy neutron-rich nuclides (also those located along the neutron closed shell N=126 to the right-hand side of the stability line) is extremely important for nuclear astrophysic investigations and, in particular, for the understanding of the r process of astrophysical nucleogenesis. For elements with Z>100 only neutron deficient isotopes (located to the left of the stability line) have been synthesized so far. The 'northeast' area of the nuclear map can be reached neither in fusion-fission reactions nor in fragmentation processes widely used nowadays for the production of new nuclei. Multinucleon transfer processes in near barrier collisions of heavy (and very heavy, U-like) ions seem to be the only reaction mechanism allowing us to produce and explore neutron-rich heavy nuclei including those located at the superheavy island of stability. In this paper several transfer reactions for different projectile-target combinations are studied in detail. Besides the predictions for the cross sections of such processes, we also analyze the angular and energy distributions of primary and survived reaction products in the laboratory frame. These results, as well as predicted excitation functions for the yields of neutron-rich superheavy isotopes, might be useful for the design of appropriate experimental equipment and for carrying out experiments of such kind.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Decommissioning of the High Flux Beam Reactor at Brookhaven Lab

The High Flux Beam Reactor at the Brookhaven National Laboratory was a heavy water cooled and moderated reactor that achieved criticality on October 31, 1965. It operated at a power level of 40 mega-watts. An equipment upgrade in 1982 allowed operations at 60 mega-watts. After a 1989 reactor shutdown to reanalyze safety impact of a hypothetical loss of coolant accident, the reactor was restarted in 1991 at 30 mega-watts. The HFBR was shutdown in December 1996 for routine maintenance and refueling. At that time, a leak of tritiated water was identified by routine sampling of ground water from wells located adjacent to the reactor’s spent fuel pool. The reactor remained shutdown for almost three years for safety and environmental reviews. In November 1999 the United States Department of Energy decided to permanently shutdown the HFBR. The decontamination and decommissioning of the HFBR complex, consisting of multiple structures and systems to operate and maintain the reactor, were complete in 2009 after removing and shipping off all the control rod blades. The emptied and cleaned HFBR dome which still contains the irradiated reactor vessel is presently under 24/7 surveillance for safety. Details of the HFBR cleanup conducted during 1999-2009 will be described in the paper.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ediesel: Diesel Additive production from ethanol and bio-diesel coproducts

This project has focused on supporting and expanding the U.S. ethanol industry by developing new conversion routes and products from ethanol and the byproducts made in ethanol fermentation. The work is relevant to the DOE program goals of developing high-margin chemical products in the biorefinery to economically support large-scale biofuel production. The higher alcohols from condensation of ethanol, alkylated amine compounds made by electrocatalytic alkyation, and fusel alcohols produced by modified fermentation microorganisms are all existing or potentially large-scale commodity or specialty chemicals with well-defined uses in industry. The formation of higher alcohols from ethanol in the condensed phase developed several catalysts, first in stirred batch autoclave reactors and then in a continuous flow reactor system, to achieve significant yields of n-butanol and higher alcohols. The best selectivity to higher alcohols exceeded 80% of theoretical at ethanol conversions of 30-40%. From the laboratory experiments and analysis of the phase equilibria of the species involved, a process concept was generated and simulated in AspenPlus to determine the specifications of the various equipment involved in the process. Results show that for the conversion and selectivity described above, the required n-butanol selling price of ~$1.60/kg is in the range of current n-butanol selling price in the marketplace. Several additional permutations of the process, along with evaluation of higher conversion and selectivities to desired alcohol products, showed that the production of n-butanol from ethanol should be competitive in the marketplace as the science and engineering behind the process improves with continued development. A second aspect of the project focused on producing fusel alcohols in increased quantities during ethanol fermentation. Fusel alcohols, which are composed primarily of isoamyl alcohol and minor quantities of C3-C6 alcohols, have potential as higher value feed stocks for specialty chemical production. Several strains of yeast were evaluated for fusel alcohol production, and the most efficient process for separating and purifying fusel alcohols was developed from both experiments and simulation. Finally, model fusel alcohol mixtures were subjected to condensation reactions with ethanol to prepare higher alcohols that again have potential for specialty chemical or solvent applications. In this preliminary work, measurable quantities of several species were observed, including some species that were previously unknown or uncharacterized in the literature. The third aspect of the project involved the electrocatalytic alkylation of amines with alcohols to form alkyl amines. Ethanol has been demonstrated to serve as an effective ethyl group transfer agent to the nitrogen centers of amines, a reaction with only water as a byproduct. Mild reaction conditions (60 °C, aqueous solution) are enabled by the novel use of simple, undivided electrochemical cell reactors that include long-lived, low cost catalytic electrodes. Direct polyalkylation of ammonia and isolation of the resulting triethylamine product was readily achieved in high yield. Though classical high temperature and pressure industrial scale alkylations reactions will likely continue to be used for production of simple product such as triethylamine, this approach has opened the door to the low cost, low waste use of ethanol and related primary and secondary alcohols to alkylate more delicate amines that were heretofore difficult to synthesize.

02 PETROLEUM↗

Summary of FY 2010 Geosciences Research

The Department of Energy's Office of Science research provides a foundation of fundamental knowledge in areas relevant to the Department's missions, and this is particularly true in the area of Geosciences, which has applied programs in multiple offices. The Office of Science’s research support also maintains our stewardship for geosciences research capabilities at the DOE National Laboratories. Excellent fundamental science that can improve and support DOE’s mission needs also provides basic understanding applicable to broader areas of geosciences beyond DOE. Particular focus areas of interest include rock physics, flow and transport of geologic fluids through porous and fractured media, analytical geochemistry and experimental and theoretical geochemistry. The Geosciences Research Program resides within the Division of Chemical Sciences, Geosciences and Biosciences, part of the Office of Basic Energy Sciences of the Office of Science. The participants in this program include researchers at National Laboratories and academic institutions. These activities are formalized by a contract or grant between the Department of Energy and the organization performing the work, providing funds for salaries, equipment, research materials, and overhead. Collaborative work among these institutions is encouraged. Because of the variety of the research needs in the different applied DOE programs, fundamental approaches with multiple potential applications are favored. The summaries in this document, prepared by the investigators, describe the scope of the individual projects.

58 GEOSCIENCES↗

Summary of FY 2009 Geosciences Research

The Department of Energy's Office of Science research provides a foundation of fundamental knowledge in areas relevant to the Department's missions, and this is particularly true in the area of Geosciences, which has applied programs in multiple offices. The Office of Science’s research support also maintains our stewardship for geosciences research capabilities at the DOE National Laboratories. Excellent fundamental science that can improve and support DOE’s mission needs also provides basic understanding applicable to broader areas of geosciences beyond DOE. Particular focus areas of interest include rock physics, flow and transport of geologic fluids through porous and fractured media, analytical geochemistry and experimental and theoretical geochemistry. The Geosciences Research Program resides within the Division of Chemical Sciences, Geosciences and Biosciences, part of the Office of Basic Energy Sciences of the Office of Science. The participants in this program include researchers at National Laboratories and academic institutions. These activities are formalized by a contract or grant between the Department of Energy and the organization performing the work, providing funds for salaries, equipment, research materials, and overhead. Collaborative work among these institutions is encouraged. Because of the variety of the research needs in the different applied DOE programs, fundamental approaches with multiple potential applications are favored. The summaries in this document, prepared by the investigators, describe the scope of the individual projects.

58 GEOSCIENCES↗

Summary of FY 2008 Geosciences Research

The Department of Energy's research provides a foundation of fundamental knowledge in areas relevant to the Department's missions, and this is particularly true in the area of Geosciences, which has applied programs in multiple other offices. The research support also maintains our stewardship for geosciences research capabilities at the DOE National Laboratories. Excellent fundamental science that can improve and support DOE’s mission needs also provides basic understanding applicable to broader areas of Earth science beyond DOE. The Geosciences Research Program resides within the Division of Chemical Sciences, Geosciences and Biosciences, part of the Office of Basic Energy Sciences of the Office of Science. The participants in this program include researchers at National Laboratories and academic institutions. These activities are formalized by a contract or grant between the Department of Energy and the organization performing the work, providing funds for salaries, equipment, research materials, and overhead. Collaborative work among these institutions is encouraged. The summaries in this document, prepared by the investigators, describe the scope of the individual projects. The Geosciences Research Program includes research in the two broad areas of geophysics and geochemistry. Particular focus areas of interest include rock physics, flow and transport of geologic fluids through porous and fractured media, analytical geochemistry and experimental and theoretical geochemistry. The research is foundational to progress for the Department of Energy's long-range technological needs. Because of the variety of the research needs in the different applied DOE programs, fundamental approaches with multiple potential applications are favored.

58 GEOSCIENCES↗

Evaluation of Weakly Informed Priors for FLEX Data

On behalf of the U. S. Nuclear Regulatory Commission (NRC), Idaho National Laboratory (INL) has reviewed the development and use of “weakly informed prior” (WIP) probability distributions to obtain industry-wide failure probability and rate distributions for portable “FLEX” equipment, as documented in the Pressurized Water Reactor Owner’s Group (PWROG) report, FLEX Equipment Data Collection and Analysis (PWROG 18043-P) by MM Degonish. The review includes a description of the methods used by the PWROG analysts. It also includes an implementation of those methods for comparison purposes and an implementation of two constrained-noninformative (CN) distributions for further WIP comparisons. The report documents several issues that the review identified in the development of the WIP distributions. They relate to the quality and representativeness of the current portable “FLEX” component data, the choice of informed distributions for related installed components, and the lack of verification for the factors chosen to weaken the information from the installed components. Two errors occurred in the computations: the posterior distribution of the WIP was used to modify the WIP itself, resulting in a lack of independence between the WIP and the data; and an error was made in the conversion of WIP mean and variance values to beta distributions. The INL reviewers think the WIP distributions presented in the report are untenable for use in risk assessments at the present time because of these issues.

99 GENERAL AND MISCELLANEOUS↗

Development of Casting Techniques for d-phase Uranium-Zirconium Alloys: CRADA 524 [Abstract only]

Casting of d-phase HALEU UZr2 alloy is an early milestone in the fabrication process for Lightbridge Fuel™. The Radiochemical Processing Laboratory at PNNL has been identified as having both the capability and expertise to perform the necessary high temperature casting of samples of Lightbridge’s alloy. The necessary equipment, facility licensing, and shipping capabilities for special nuclear material coupled with its expertise in uranium casting techniques makes PNNL uniquely suited to this project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Port Electrification Handbook: A reference to aid U.S. port energy transitions

Port electrification can take many forms, such as electrifying cargo handling equipment or deploying a microgrid to power critical port infrastructure. To help evaluate the growing challenge of increased electrification and its impacts on the system, Pacific Northwest National Laboratory developed this Port Electrification Handbook with support from the U.S. Department of Energy, Office of Electricity’s Microgrids R&D [research and development] program. The goals of this handbook are the following: (1) Help port operators and planners evaluate different electrification technologies; (2) Explain how these technologies could aid and impact ports and surrounding communities; and (3) Provide step-by-step considerations for port electrification.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Apollo Experiment Report: Lunar-Sample Processing in the Lunar Receiving Laboratory High-Vacuum Complex

A high-vacuum complex composed of an atmospheric decontamination system, sample-processing chambers, storage chambers, and a transfer system was built to process and examine lunar material while maintaining quarantine status. Problems identified, equipment modifications, and procedure changes made for Apollo 11 and 12 sample processing are presented. The sample processing experiences indicate that only a few operating personnel are required to process the sample efficiently, safely, and rapidly in the high-vacuum complex. The high-vacuum complex was designed to handle the many contingencies, both quarantine and scientific, associated with handling an unknown entity such as the lunar sample. Lunar sample handling necessitated a complex system that could not respond rapidly to changing scientific requirements as the characteristics of the lunar sample were better defined. Although the complex successfully handled the processing of Apollo 11 and 12 lunar samples, the scientific requirement for vacuum samples was deleted after the Apollo 12 mission just as the vacuum system was reaching its full potential.

White, D. R.↗

Measurement of RF lightning emissions

A lightning radio emission observation laboratory is described. The signals observed and recorded include HF, VHF and UHF radio emissions, optical signature, electric field measurements, and thunder. The objectives of the station, the equipment used, and the recording methods are discussed.

Lott, G. K., Jr.↗

NOSL experiment support

An optical lightning detector was constructed and flown, along with Vinton cameras and a Fairchild Line Scan Spectrometer, on a U-2 during the summer of 1979. The U-2 lightning data was obtained in daylight, and was supplemented with ground truth taken at Langmuir Laboratory. Simulations were prepared as required to establish experiment operating procedures and science training for the astronauts who would operate the Night/Day Optical Survey of Thunderstorm Lightning (NOSL) equipment during the STS-2 NOSL experiment on the Space Shuttle. Data was analyzed and papers were prepared for publication.

Brook, M.↗

Measurements of the methane relaxation times for application to the infrared emission models of the upper atmospheres of outer planets and Titan

The 7.8 micrometer emission from the nu(sub 4) band of methane (CH4) is a regularly observed feature in the stratosphere of all the giant planets and Titan. On Jupiter, enhancements in this emission are associated with the infrared hot spots in the auroral zone. Attempts to model this phenomenon in particular, and to understand the role of methane in general, have been hampered in part by a lack of adequate laboratory measurements of the collisional relaxation times for the nu(sub 3) and nu(sub 4) levels over the appropriate temperature range. To provide this needed data, a series of laboratory experiments were initiated. In the experimental arrangement the nu(sub3) band of methane is pumped at 3.3 micrometers using a pulsed infrared source (Nd:YAG/dye laser system equipped with a wave-length extender). The radiative lifetime of the nu(sub 3) level (approximately 37 ms) is much shorter than the nu(sub 4) lifetime (approximately 390 ms); however, a rapid V-V energy transfer rate ensures that the nu(sub 4) level is substantially populated. The photoacoustic technique is used to acquire relaxation rate information. The experiments are performed using a low-temperature, low-pressure cell. Experimental apparatus and technique are described. In addition some of the experimental difficulties associated with making these measurements are discussed and some preliminary results are presented.

Halthore, Rangasayi N.↗