Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Influence of the matrix properties on the performances of Er-doped Si nanoclusters light emitting devices

We investigated the properties of light emitting devices whose active layer consists of Er-doped Si nanoclusters (nc) generated by thermal annealing of Er-doped SiO{sub x} layers prepared by magnetron cosputtering. Differently from a widely used technique such as plasma enhanced chemical vapor deposition, sputtering allows to synthesize Er-doped Si nc embedded in an almost stoichiometric oxide matrix, so as to deeply influence the electroluminescence properties of the devices. Relevant results include the need for an unexpected low Si excess for optimizing the device efficiency and, above all, the strong reduction of the influence of Auger de-excitation, which represents the main nonradiative path which limits the performances of such devices and their application in silicon nanophotonics.

36 MATERIALS SCIENCE↗

Final Technical Report for NSF/DOE partnership grant 1004284/ER54905/SC0004660: 2011- 2013

Research has been performed on two topics: (1) Nonlinear time-dependent phenomena in the regime of electron magnetohydrodynamics (EMHD). (2) Plasma structures forming ”bubbles”. The latter are regions of localized density depletions or enhancements separated from the ambient plasma by sheaths or double layers. Three-dimensional magnetic null points can also be considered as ”magnetic bubbles”. Nonlinear EMHD fields are generated by pulsed magnetic loops. The magnetic field varies in time faster than an ion cyclotron period, hence interacts only with electrons. Space charge electric fields are created when magnetic forces try to separate electrons from ions. Electric and magnetic forces nearly balance to keep the plasma quasi neutral. This leads to rotational electron motions, i.e. Hall currents and associated magnetic perturbations. When the time scale falls between the ion and electron cyclotron period the magnetic perturbation is convected in the whistler mode. When the time-varying magnetic field exceeds the background magnetic field the whistler mode becomes highly nonlinear since its properties depend on the total magnetic field. When the time-varying magnetic field creates magnetic null points or null lines EMHD breaks down. Electrons can be accelerated in null lines which dissipated magnetic energy like in magnetic reconnection. Energized electrons with anisotropic distributions create secondary whistler instabilities. These effects have been observed in field topologies resembling spheromaks and field-reversed configurations (FRCs). The whistler mode propagation near magnetic nulls is not trivial when the field gradients and wavelength are comparable. Ray tracing is inappropriate when the WKB approximation breaks down. Experiments have been started to map wave propagation on curved field lines with null points. Initial results show that whistlers in highly nonuniform fields have highly oblique phase velocities but the energy flow remains dominantly along the field. Density bubbles are created by anode discharges, typically forming spherical ”fireballs” bounded by a double layer. In a magnetized plasma the shape becomes cylindrical, in nonuniform magnetic fields many asymmetric fireball shapes are possible. Due to electron energization the fireball plasma has higher density and temperature than the ambient plasma. The double layer can also be produced by a high transparency positively biased grid. Instabilities arise from the electron transit through the plasma bubble and the double layer. When a permanent magnet is biased positively the electrons perform ExB drifts in the equatorial plane between the poles. Electron drift modes are excited with a high spectral contents. Similarly, a negatively biased magnet produces a disk-shaped plasma bubble. The cold magnet emits secondary electrons due to the impact of energetic ions. Such magnetron discharges exhibit a variety of instabilities which affect the cross-field transport and sputtering applications. This report will summarize the main effects observed and provide references to more detailed publications.

, nonlinear time-dependent phenomena↗

Magnetic control of breakdown: Toward energy-efficient hollow-cathode magnetron discharges

Characteristics of electrical breakdown of a planar magnetron enhanced with an electromagnet and a hollow-cathode structure, are studied experimentally and numerically. At lower pressures the breakdown voltage shows a dependence on the applied magnetic field, and the voltage necessary to achieve the self-sustained discharge regime can be significantly reduced. At higher pressures, the dependence is less sensitive to the magnetic field magnitude and shows a tendency of increased breakdown voltage at the stronger magnetic fields. A model of the magnetron discharge breakdown is developed with the background gas pressure and the magnetic field used as parameters. The model describes the motion of electrons, which gain energy by passing the electric field across the magnetic field and undergo collisions with neutrals, thus generating new bulk electrons. The electrons are in turn accelerated in the electric field and effectively ionize a sufficient amount of neutrals to enable the discharge self-sustainment regime. The model is based on the assumption about the combined classical and near-wall mechanisms of electron conductivity across the magnetic field, and is consistent with the experimental results. The obtained results represent a significant advance toward energy-efficient multipurpose magnetron discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Innovative technique for tailoring intrinsic stress in reactively sputtered piezoelectric aluminum nitride films

Novel technical and technological solutions enabling effective stress control in highly textured polycrystalline aluminum nitride (AlN) thin films deposited with ac (40 kHz) reactive sputtering processes are discussed. Residual stress in the AlN films deposited by a dual cathode S-Gun magnetron is well controlled by varying Ar gas pressure, however, since deposition rate and film thickness uniformity depend on gas pressure too, an independent stress control technique has been developed. The technique is based on regulation of the flux of the charged particles from ac plasma discharge to the substrate. In the ac powered S-Gun, a special stress adjustment unit (SAU) is employed for reducing compressive stress in the film by means of redistribution of discharge current between electrodes of the S-Gun leading to controllable suppression of bombardment of the growing film. This technique is complementary to AlN deposition with rf substrate bias which increases ion bombardment and shifts stress in the compressive direction, if required. Using SAU and rf bias functions ensures tailoring intrinsic stress in piezoelectric AlN films for a particular application from high compressive -700 MPa to high tensile +300 MPa and allows the gas pressure to be adjusted independently to fine control the film uniformity. The AlN films deposited on Si substrates and Mo electrodes have strong (002) texture with full width at half maximum ranging from 2 degree sign for 200 nm to 1 degree sign for 2000 nm thick films.

36 MATERIALS SCIENCE↗

Investigation of ISIS and Brookhaven National Laboratory ion source electrodes after extended operation

Linac4 accelerator of Centre Europeen de Recherches Nucleaires is under construction and a RF-driven H{sup -} ion source is being developed. The beam current requirement for Linac4 is very challenging: 80 mA must be provided. Cesiated plasma discharge ion sources such as Penning or magnetron sources are also potential candidates. Accelerator ion sources must achieve typical reliability figures of 95% and above. Investigating and understanding the underlying mechanisms involved with source failure or ageing is critical when selecting the ion source technology. Plasma discharge driven surface ion sources rely on molybdenum cathodes. Deformation of the cathode surfaces is visible after extended operation periods. A metallurgical investigation of an ISIS ion source is presented. The origin of the deformation is twofold: Molybdenum sputtering by cesium ions digs few tenths of mm cavities while a growth of molybdenum is observed in the immediate vicinity. The molybdenum growth under hydrogen atmosphere is hard and loosely bound to the bulk. It is, therefore, likely to peel off and be transported within the plasma volume. The observation of the cathode, anode, and extraction electrodes of the magnetron source operated at BNL for two years are presented. A beam simulation of H{sup -}, electrons, and Cs{sup -} ions was performed with the IBSimu code package to qualitatively explain the observations. This paper describes the operation conditions of the ion sources and discusses the metallurgical analysis and beam simulation results.

08 HYDROGEN↗

Metal negative ion beam extraction from a radio frequency ion source

A metal ion source of magnetron magnetic field geometry has been designed and operated with a Cu hollow target. Radio frequency power at 13.56 MHz is directly supplied to the hollow target to maintain plasma discharge and induce self-bias to the target for sputtering. The extraction of positive and negative Cu ion beams have been tested. The ion beam current ratio of Cu{sup +} to Ar{sup +} has reached up to 140% when Ar was used as the discharge support gas. Cu{sup −} ion beam was observed at 50 W RF discharge power and at a higher Ar gas pressure in the ion source. Improvement of poor RF power matching and suppression of electron current is indispensable for a stable Cu{sup −} ion beam production from the source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic dipole discharges. I. Basic properties

A simple discharge is described which uses a permanent magnet as a cold cathode and the metallic chamber wall as an anode. The magnet's equator is biased strongly negative, which produces secondary electrons due to the impact of energetic ions. The emitted electrons are highly confined by the strong dipolar magnetic field and the negative potential in the equatorial plane of the magnet. The emitted electrons ionize near the sheath and produce further electrons, which drift across field lines to the anode while the nearly unmagnetized ions are accelerated back to the magnet. A steady state discharge is maintained at neutral pressures above 10{sup −3} mbar. This is the principle of magnetron discharges, which commonly use cylindrical and planar cathodes rather than magnetic dipoles as cathodes. The discharge properties have been investigated in steady state and pulsed mode. Different magnets and geometries have been employed. The role of a background plasma has been investigated. Various types of instabilities have been observed such as sheath oscillations, current-driven turbulence, relaxation instabilities due to ionization, and high frequency oscillations created by sputtering impulses, which are described in more detail in companion papers. The discharge has also been operated in reactive gases and shown to be useful for sputtering applications.

36 MATERIALS SCIENCE↗

Characteristics of the magnetron discharge plasma at large distances from the cathode

The parameters of the magnetron plasma at distances several times larger than the cathode diameter were measured. The plasma temperature and density measured by the probe technique were found to be 1.4 eV and 6 x 10{sup 10} cm{sup -3}, respectively. The dependences of the plasma density and temperature on the argon flow rate in the course of TiAlN coating deposition were determined. Before deposition of the coating, the substrate was cleaned by ion sputtering at substrate bias voltages higher than 200 V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of ion bombarding energies on photocatalytic TiO{sub 2} films growing in a pulsed dual magnetron discharge

Photocatalytic crystalline TiO{sub 2} films were deposited by a pulsed dc dual magnetron system. The depositions were performed using two unbalanced magnetrons with planar titanium targets of 50 mm diameter in Ar+O{sub 2} gas mixtures at a total pressure of 0.9 Pa with oxygen partial pressures ranging from 0.2 to 0.9 Pa. The maximum substrate surface temperature was 160 deg. C Both magnetrons operated in the same asymmetric bipolar mode at the repetition frequencies of 100 and 350 kHz with a fixed 50% duty cycle and the average target power densities of 52-74 W cm{sup -2} in the negative voltage phase of the pulses, but the magnetron operations were shifted by a half of the period. Time-averaged energy-resolved mass spectroscopy was performed at a substrate position located 100 mm from the targets. The measured structure of the ion energy distributions was correlated with the distinct pulse phases of the magnetron discharges. A decrease in the energy delivered by fast ions (E{>=}10 eV) to the unit volume of the growing films, together with possible effects of plasma-chemical processes, during the depositions at the oxygen partial pressures of 0.5-0.75 Pa and the repetition frequency of 350 kHz resulted in a strong predominance of the highly photoactive crystalline anatase phase in the TiO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cosputtered Mn-doped Si thin films studied by x-ray spectroscopy

Substitutionally doped Si{sub 1-x}Mn{sub x} thin films were fabricated by a magnetron cosputtering method at a low growth temperature. X-ray absorption fine structure (XAFS) and x-ray diffraction (XRD) techniques were used to investigate the structures of the Si{sub 1-x}Mn{sub x} thin films. The XRD results exhibit that no secondary phases such as metallic Mn or Mn-Si compound can be detected. The detailed analysis of the extended XAFS together with the x-ray absorption near-edge structure spectra at the Mn K-edge unambiguously reveals that the doped Mn atoms are incorporated into the Si matrix and substitute for the Si sites in the Si lattice. The results clearly indicate that the Mn occupations in silicon thin films are quite sensitive to the growth conditions and the postannealing treatment.

36 MATERIALS SCIENCE↗

Manufacturing of Sputtering Composite Targets Containing Phases of Co{sub 2}FeSi or Co{sub 2}MnSi Heusler Alloy

The paper presents a method for manufacturing mechanically strong sputtering composite targets containing the phase of the Co{sub 2}FeSi or Co{sub 2}MnSi Heusler alloy of the stoichiometric composition, which can be used for fabrication of spin electronic devices by high-frequency magnetron deposition and pulsed laser deposition of thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ plasma diagnostics study of a commercial high-power hollow cathode magnetron deposition tool

Using a newly designed and built plasma diagnostic system, the plasma parameters were investigated on a commercial 200 mm high-power hollow cathode magnetron (HCM) physical vapor deposition tool using Ta target under argon plasma. A three dimensional (3D) scanning radio frequency (rf)-compensated Langmuir probe was constructed to measure the spatial distribution of the electron temperature (T{sub e}) and electron density (n{sub e}) in the substrate region of the HCM tool at various input powers (2-15 kW) and pressures (10-70 mTorr). The T{sub e} was in the range of 1-3 eV, scaling with decreasing power and decreasing pressure. Meanwhile, n{sub e} was in the range of 4x10{sup 10}-1x10{sup 12} cm{sup -3} scaling with increasing power and decreasing pressure. As metal deposits on the probe during the probe measurements, a self-cleaning plasma cup was designed and installed in the chamber to clean the tungsten probe tip. However, its effectiveness in recovering the measured plasma parameters was hindered by the metal layer deposited on the insulating probe tube which was accounted for the variation in the plasma measurements. Using a quartz crystal microbalance combined with electrostatic filters, the ionization fraction of the metal flux was measured at various input power of 2-16 kW and pressure of 5-40 mTorr. The metal ionization fraction reduced significantly with the increasing input power and decreasing gas pressure which were attributed to the corresponding variation in the ionization cross section and the residence time of the sputtered atoms in the plasma, respectively. Both the metal neutral and ion flux increased at higher power and lower pressure. The 3D measurements further showed that the ionization fraction decreased when moving up from the substrate to the cathode.

74 ATOMIC AND MOLECULAR PHYSICS↗

High temperature coefficient of resistance achieved by ion beam assisted sputtering with no heat treatment in V{sub y}M{sub 1−y}O{sub x} (M = Nb, Hf)

Thermal imaging based on room temperature bolometer sensors is a growing market, constantly searching for improved sensitivity. One important factor is the temperature coefficient of resistance (TCR), i.e., the sensitivity of the active material. Herein, the authors report the improved TCR properties attainable by the “ion beam assisted deposition” method for room temperature deposition. V{sub y}M{sub 1−y}O{sub x} (M = Nb, Hf) thin-film alloys were fabricated on 1 μm thermal SiO{sub 2} atop Si (100) substrates by reactive magnetron cosputtering at room temperature using a low energy ion source, aimed at the film, to insert dissociated oxygen species and increase film density. The authors studied the influence of deposition parameters such as oxygen partial pressure, V to M ratio, and power of the plasma source, on resistance and TCR. The authors show high TCR (up to −3.7% K{sup −1}) at 300 K, and excellent uniformity, but also an increase in resistance. The authors emphasize that samples were prepared at room temperature with no heat treatment, much simpler than common processes that require annealing at high temperatures. So, this is a promising fabrication route for uncooled microbolometers.

36 MATERIALS SCIENCE↗

Investigation of emitting centers in SiO{sub 2} codoped with silicon nanoclusters and Er{sup 3+} ions by cathodoluminescence technique

This study reports on the investigation and characterization of the different emitting centers within SiO{sub 2} codoped by Er{sup 3+} ions and silicon-excess. Erbium doped silicon-rich silicon oxide (SRSO:Er) thin films, fabricated by magnetron cosputtering at 500 deg. C, were analyzed by means of cathodoluminescence. The CL spectra of SRSO, Er-doped SiO{sub 2} and SRSO:Er were recorded and compared for various annealing temperatures. It was found that some specific optically-active point-defects called silicon-oxygen-deficient centers (SiODCs) are present in all kinds of samples. In the layers containing some excess Si, the phase separation between Si nanoclusters (Si-ncs) and SiO{sub 2} is observed when the annealing temperature reaches and exceeds 900 deg. C. The formation of Si-nc increases with annealing at the expense of SiODCs that was assumed to act as seeds for the growth of Si-nc. For SRSO:Er samples, the contribution of SiODCs overlaps that due to Er{sup 3+} transitions in the visible range. The emissions from SiODCs are drastically reduced when an SRSO sample is doped with Er ions, whereas the Er emissions in the visible range start to be distinctly observed. We propose a scenario of energy transfer from SiODCs toward the Er ions, especially as the emissions from the Si-based entities (SiODCs, Si-nc) and from some transitions of Er ions are located in a same visible broad range.

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗

Investigation of Fe-Si-N films as magnetic overcoat for high density recording disk drives

A 50-nm-thick Fe-Si-N films were deposited via reactive magnetron cosputtering of independent Fe and Si targets, in Ar/N{sub 2} gas mixture, under different dc Fe target power conditions. Magnetic properties, mechanical hardness and tribological properties were characterized as a function of the Fe target power by magnetometry, nanoindentation, and nanoscratch testing, respectively. Deposited samples were found to be ferromagnetic with a coercivity of approximately 20 Oe and a saturation magnetization increasing from 200 to 1100 emu/cm{sup 3} as a function of Fe sputter power, i.e., values typical of soft magnetic materials. The mechanical hardness was found to be between 50% and 70% of the hardness of a pure SiN{sub x} film. Nanotribological properties of films deposited with a Fe target power {>=}80 W degraded rapidly.

36 MATERIALS SCIENCE↗

Downstream plasma transport and metal ionization in a high-powered pulsed-plasma magnetron

Downstream plasma transport and ionization processes in a high-powered pulsed-plasma magnetron were studied. The temporal evolution and spatial distribution of electron density (n{sub e}) and temperature (T{sub e}) were characterized with a 3D scanning triple Langmuir probe. Plasma expanded from the racetrack region into the downstream region, where a high n{sub e} peak was formed some time into the pulse-off period. The expansion speed and directionality towards the substrate increased with a stronger magnetic field (B), largely as a consequence of a larger potential drop in the bulk plasma region during a relatively slower sheath formation. The fraction of Cu ions in the deposition flux was measured on the substrate using a gridded energy analyzer. It increased with higher pulse voltage. With increased B field from 200 to 800 Gauss above racetrack, n{sub e} increased but the Cu ion fraction decreased from 42% to 16%. A comprehensive model was built, including the diffusion of as-sputtered Cu flux, the Cu ionization in the entire plasma region using the mapped n{sub e} and T{sub e} data, and ion extraction efficiency based on the measured plasma potential (V{sub p}) distribution. The calculations matched the measurements and indicated the main causes of lower Cu ion fractions in stronger B fields to be the lower T{sub e} and inefficient ion extraction in a larger pre-sheath potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗