Search NASA⌕ Search

SEARCH · Search NASA

Results for “Overview”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

SpaceCubE OVERVIEW and Use of COTS Parts in Space

This presentation provides an overview of the SpaceCube data processing technology and successful use of Commercial Off-the-Shelf (COTS) parts on 11 space missions/payloads.

COTS Parts, SpaceCube↗

UAS Integration in the NAS Project: Overview of Flight Test Series 6

The National Aeronautics and Space Administration (NASA) Unmanned Aircraft Systems Integration in the National Airspace System (UAS-NAS) Project has conducted a series of flight test campaigns intended to support the reduction of barriers that prevent unmanned aircraft from flying without the required waivers from the Federal Aviation Administration (FAA). The 2019 Flight Test Series 6 (FT6) campaign furthered this path and supported three test configurations: 1) Radar Characterization, 2) Scripted Encounters and 3) Full Mission. Radar Characterization assessed the performance of Honeywell’s low size, weight, and power (low SWaP) radar system; Scripted Encounters investigated the timing of Detect and Avoid (DAA) alerting thresholds using a Department of Defense (DoD) Group 3 unmanned aircraft system (UAS) equipped with low SWaP sensors and three different live intruder aircraft flown at varying encounter geometries; and Full Mission validated human-in-the-loop simulations by collecting pilot performance data from a ground control station while controlling a live unmanned aircraft on a mission in both virtual and live air traffic controlled airspace. The subject pilot observed a research display that presented DAA advisories to maintain separation from live and virtual aircraft. The test was conducted over a twenty-week period within the R-2508 special use airspace located near Edwards Air Force Base (EAFB), CA. Over 240 encounters were flown during the test series and FT6 proved to be invaluable for the purposes of planning, managing, and executing this type of integrated flight test in both live and virtual environments. Data collected from FT6 was provided to the RTCA Special Committee 228 (SC-228) to help inform the Phase 2 Minimum Operational Performance Standards (MOPS). FT6 was the final test series for the UAS-NAS project that began in 2012. This paper provides an overview of FT6 and its success can be directly attributed to the diligent work of the men and women who supported this effort.

UAS in the NAS↗

Introduction and Overview of the Object-Oriented Turbomachinery Analysis Code (OTAC)

This is an overview of the Object-Oriented Turbomachinery Analysis Code (OTAC). OTAC is an object-oriented code developed to perform 2-D meridional flowthrough design and analysis of turbomachines. OTAC uses an implicit formulation of the governing equations relevant to meanline and streamline simulations to solve for the thermodynamic and velocity state of the fluid at the exit of each blade row. OTAC is written using the interpreted language capability of the Numerical Propulsion System Simulation (NPSS) code; as such, OTAC requires a version of NPSS to run. A series of models and test cases have been developed to demonstrate the capability and features of OTAC.

Turbomachinery↗

From Requirements to Autonomous Flight: An Overview of the Monitoring ICAROUS Project

The Independent Configurable Architecture for Reliable Operations of Unmanned Systems(ICAROUS) is a software architecture incorporating a set of algorithms to enable autonomous operations of unmanned aircraft applications. This paper provides an overview of Monitoring ICAROUS, a project whose objective is to provide a formal approach to generating runtime monitors for autonomous systems from requirements written in a structured natural language. This approach integrates FRET, a formal requirement elicitation and authoring tool, and Copilot, a runtime verification framework. FRET is used to specify formal requirements in structured natural language. These requirements are translated into temporal logic formulae. Copilot is then used to generate executable runtime monitors from these temporal logic specifications. The generated monitors are directly integrated into ICAROUS to perform runtime verification during flight.

Formal Methods↗

Exploration Medical Capability Systems Engineering Overview and Update

Long duration Lunar and Martian missions will change the way NASA currently practices medicine. The missions will require more autonomous capability compared to current low Earth orbit operations. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element’s approach to enabling the necessary autonomy. The ExMC Systems Engineering (SE) team’s mission is to “Define, develop, validate, and manage the technical system design needed to implement exploration medical capabilities for Mars and test the design in a progression of proving grounds.” The Element’s work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is using Model-Based System Engineering (MBSE) to accomplish its integrative goals. The MBSE approach to medical system design offers a paradigm shift toward greater integration between the vehicle and the medical system, and directly supports the transition of Earth-reliant ISS operations to the Earth-independent operations envisioned for Mars. This talk will provide a high-level overview of what the ExMC SE team has accomplished since the last IWS and what they are focusing on for the upcoming year.

Kerry McGuire↗

Exploration Medical Capability Science and Research Overview and Update

The mission of the Exploration Medical Capability (ExMC) Element is to advance medical system design and risk-informed decision making for exploration beyond low Earth orbit to promote human health and performance in space. In order to accomplish this mission, the Element takes a progressively Earth-independent approach to three main areas: 1)answering key clinical and science research questions that will help to address the challenges of providing medical care in the extreme environment of space, 2)applying systems engineering processes to medical system design with the goal of developing robust requirements that can be fully integrated into future space exploration vehicle designs, and 3)developing and demonstrating novel medical technologies that will improve future medical capabilities in space. This presentation will focus on selected scientific and technical conceptual drivers for the Element, the current and future research risks and gaps, and provide an overview of the Element’s progress in 2020.

Kris Lehnhardt↗

Clinical Decision Support - Overview and Update

We are entering a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses the gap Medical-701 within the Inflight Medical Conditions risk: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant. The aim of the CDS project is to develop and provide recommended requirements for an in-vehicle CDSS that acts as an assistant for delivering optimal health and performance and medical care during exploration missions. The CDSS is envisioned as a software-based tool that will augment a crewmembers’ knowledge, skills and abilities to assist in decision-making and crew health and performance (CHP) management thus increasing CHP systems capabilities. The human interface will be context aware and lessen the cognitive load to assimilate and use information as well as combine large disparate data sets in such a manner that provides the crew with actionable insight to decisions related to crew medical, health and performance management. Crew autonomy will be provided through a CDS that presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. The CDS project addresses the need for crew members to operate independently during long duration space exploration missions that require medical Levels of Care (LoC) V, the highest level specified by NASA-STD-3001 and described in more detail by the ExMC interpretation of LoC document (NASA/TM-2017-219290), where significant changes to in-flight and habitat medical care necessitate increasing crew autonomy in decision making and task performance. The CDS project will develop and test a series of iterative and increasingly more complex system prototypes. These annual demonstrations of the data system integration with the crew health and performance domain will inform exploration medical system requirements for an on-board Clinical Decision Support System (CDSS) through a series of use cases that guide CDS prototype functionality. CDS concepts are based on ExMC Concept of Operations documents (presented separately) and will highlight architecture extensibility to other more complex analyses and tests using core crew health and performance integrated data management, processing and visualization capabilities. This approach also establishes how externally developed analyses and approaches could be added to expand a clinical decision support system and thus highlight how a comprehensive system can be commercially and/or globally developed. The CDS project will build upon the concept of an integrated data management approach based on the Medical Data Architecture (MDA) project to more fully address challenges associated with in-flight and habitat medical, health and performance care due to constraints on mass, volume, power, crew time and medical evacuation capabilities required for medical LoC V. These requirements will be derived through systems engineering approaches and software prototype developments over the course of the multi-year CDS project to address crew health and performance decision-making and task performance, often autonomously executed by the crew, in a manner that is consistent with the appropriate medical level of care for the mission. This presentation will provide an overview of the vision for the CDS project and highlight the initial accomplishments in project planning, implementation and requirements identification in fiscal year 2020.

clinical decision support system↗

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast – Part 2: Circulation, Boundary Layer, and Clouds

The Western North Atlantic Ocean (WNAO) is a complex land-ocean-atmosphere system that experiences a broad range of atmospheric phenomena, which in turn drive unique aerosol transport pathways, cloud morphologies, and boundary layer variability. This work, Part 2 of a 2-part paper series, provides an overview of the atmospheric circulation, boundary layer variability, three-dimensional cloud structure, and precipitation over the WNAO; the companion paper (Part 1) focused on chemical characterization of aerosols, gases, and wet deposition.Seasonal changes in atmospheric circulation and sea surface temperature explain a clear transition in cloud morphologies from small shallow cumulus clouds, convective clouds, and tropical storms in summer, to stratus/stratocumulus and multi-layer cloud systems associated with winter storms. Synoptic variability in cloud fields is estimated using satellite-based weather states, and the role of postfrontal conditions (cold-air outbreaks) in the development of stratiform clouds is further analyzed. Precipitation is persistent over the ocean, with a regional peak over the Gulf Stream path, where offshore sea surface temperature gradients are large and surface fluxes reach a regional peak. Satellite data show a clear annual cycle in cloud droplet number concentration with maxima (minima) along the coast in winter (summer), suggesting a marked annual cycle in aerosol-cloud interactions. Compared with satellite cloud retrievals, four climate models qualitatively reproduce the annual cycle in cloud cover and liquid water path, but with large discrepancies across models, especially in the extra-tropics. The paper concludes with a summary of outstanding issues and recommendations for future work.

David Painemal↗

2021 CMH-17 Vol 5 Virtual Meeting CMC M&P Brief Overview

This overview (several slides) describes 1) the overall Goals of the CMH-17 Vol 5 CMC M&P (Materials and Processes) Working Group, 2) M&P sections in the existing CMH-17 Vol 5A that have been targeted for updating, 3) challenges to updating that content for the next edition of Vol 5, and 4) M&P plans for updating CMH-17 Vol 5A. M&P Working Group chairs Kiser and Lehman are leading a group of technical experts to address the sections that require the most attention in terms of updating information. A virtual meeting is providing an opportunity to recruit CMC, fiber, and EBC technical experts to address those sections. Goals will be defined for completing the updating of those sections, taking into account the need to have the updated content reviewed by SME (subject matter experts) well in advance of the publishing date.

Environmental Barrier Coating (EBC)↗

Space Interferometry Mission (SIM): Overview and current status

The Space Interferometry Mission (SIM) will be the first in-space, long-baseline Michelson Stellar Interferometer. SIM will perform precision astrometry at the micro-arcsecond accuracy level, which will be used to characterize planetary systems around stars within about ten parsecs of Earth and address a number of other key astrophysics projects. This paper provides a broad overview of the SIM Mission. Topics covered include: the science objectives, key top level requirements, how the mission will be implemented (technical and programmatic), technology development status, who the key players are in the SIM development, an assessment of where the project is today, and prognosis for the future.

interferometer↗

Overview of the TOPEX/Poseidon Platform Harvest Verification Experiment

An overview is given of the in situ measurement system installed on Texaco's Platform Harvest for verification of the sea-level measurement from the TOPEX/POSEIDON satellite. The pre-launch error budget suggested that the total root mean square (RMS) error due to measurements made at this verification site would be less than four centimeters.

satellite↗

Overview of the ANITA project

The ANITA project is designed to investigate ultra-high energy (>10^17 eV) cosmic ray interactions throughout the universe by detecting the neutrinos created in those interactions. These high energy neutrinos are detectable through their interactions within the Antarctic ice sheet, which ANITA will use as a detector target that effectively converts the neutrino interactions to radio pulses. This paper will give an overview of the project including scientific objectives, detection description and mission design.

ANITA↗

Overview of the Mars laser communication demonstration project

This paper provides an overview of the Mars Laser Communications Demonstration Project, a joint project between NASA’s Goddard Space Flight Center (GSFC), the Jet Propulsion Laboratory, California Institute of Technology (JPL), and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL). It reviews the strawman designs for the flight and ground segments, the critical technologies required, and the concept of operations. It reports preliminary conclusions from the Mars Lasercom Study conducted at MIT/LL and on additional work done at JPL and GSFC. The lasercom flight terminal will be flown on the Mars Telecom Orbiter (MTO) to be launched by NASA in 2009, and will demonstrate a technology which has the potential of vastly improving NASA’s ability to communicate throughout the solar system

DePaula, Ramon↗