Search NASA⌕ Search

SEARCH · Search NASA

Results for “Porous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Synthesis of Porous Composite Materials via Combustion of a Mixture of Titanium, VT6 Alloy, and Amorphous Boron Powders

Self-propagating high-temperature synthesis without preheating has been realized in powder mixtures consisting of large spherical VT6 titanium alloy granules, small dendritic titanium particles, and black amorphous boron. Synthesis in a combustion wave involved a few steps: first, boron reacted with fine-particle titanium to form a boride matrix, which then reacted with molten VT6 titanium alloy granules. We have obtained a porous metal–ceramic material similar in structure to composites.

36 MATERIALS SCIENCE↗

The Influence of Immersion of Porous Silicon in Aqueous Solutions of Fe(NO{sub 3}){sub 3} on Photoluminescence during Long Storage

The interaction of porous silicon (PS) with aqueous solutions of Fe(NO{sub 3}){sub 3} with different molar (M) concentrations causes introduction of iron ions into silicon pores (PS–Fe), formation of adsorbed iron coatings with different thicknesses, and an increase in the stability of PS layers, which is important for development of device structures based of PS. To treat PS layers with solutions by the immersion method, it is necessary to determine how this affects the spectral composition and intensity of photoluminescence (PL), as well as the kinetics of PL changes during long storage under atmospheric conditions. Upon treatment of freshly prepared PS by immersion into in a Fe(NO{sub 3}){sub 3} aqueous solution, it was found that, after short-term storage (up to 5 days) of the PS samples, the PL intensity increases by 7.5 and 3–3.6 times at low (0.2 M) and high (0.7–0.8 M) concentrations of Fe(NO{sub 3}){sub 3}, respectively, compared to the PL intensity of an untreated PS layer. After long-term storage (4 months), the PL intensity of PS–Fe samples with concentrations of 0.1–0.2 and 0.7–0.8 M was observed to considerably increase (by 8–18 times) with unchanged position of the PL peak with respect to untreated PS. However, at the Fe(NO{sub 3}){sub 3} concentration of 0.3 М, the PL intensity decreases and the PL peak shifts to the blue, which is explained by incomplete coverage of the PS surface by an adsorbed iron layer. The kinetics of PL spectra during long-term storage is analyzed, and a model is proposed to explain the PL intensity and spectral composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature evolution of copper oxide nanoparticles in porous glasses

The temperature evolution of copper oxide nanoparticles in the temperature range of 1.5-250 K has been investigated by thermal-neutron diffraction. CuO particles were obtained by Cu(NO{sub 3}){sub 2} {center_dot} 3H{sub 2}O decomposition directly in the pores of porous glass with an average pore diameter of 7 nm. The characteristic nanoparticle size and linear thermal expansion coefficients have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and physicochemical characterization of a porous coordination polymer of Sn-Cu xylarate: The structure of [Sn{sub 4}Cu{sub 8.5}(HL){sub 2}(L){sub 4}O{sub 2}(OH)(H{sub 2}O){sub 12.5}] {center_dot} 17.2H{sub 2}O

A porous coordination polymer of Sn-Cu xylarate [Sn{sub 4}Cu{sub 8.5}(HL){sub 2}(L){sub 4}O{sub 2}(OH)(H{sub 2}O){sub 12.5}] {center_dot} 17.2H{sub 2}O (H{sub 5}L is xylaric acid) is synthesized for the first time and characterized by chemical analysis, IR spectroscopy, and X-ray diffraction. Centrosymmetric heterometallic fragments [Sn{sub 4}Cu{sub 6}(HL){sub 2}(L){sub 4}O{sub 2}(H{sub 2}O){sub 6}] (A) including copper Cu1-3 and tin Sn1,2 atoms are distinguished in the structure. The Cu4(OH){sub 0.5}(H{sub 2}O){sub 2.5} bridges connect A units into chains running along the c axis, and the Cu5(OH)(H{sub 2}O) bridges connect A fragments into layers perpendicular to the c axis. The Cu4,5 atoms form a framework whose voids accommodate the crystallization water molecules.

36 MATERIALS SCIENCE↗

Complementary study of the internal porous silicon layers formed under high-dose implantation of helium ions

The surface layers of Si(001) substrates subjected to plasma-immersion implantation of helium ions with an energy of 2–5 keV and a dose of 5 × 10{sup 17} cm{sup –2} have been investigated using high-resolution X-ray reflectivity, Rutherford backscattering, and transmission electron microscopy. The electron density depth profile in the surface layer formed by helium ions is obtained, and its elemental and phase compositions are determined. This layer is found to have a complex structure and consist of an upper amorphous sublayer and a layer with a porosity of 30–35% beneath. It is shown that the porous layer has the sharpest boundaries at a lower energy of implantable ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical behavior of phase interfaces in porous media: Analysis of scaling properties with the use of noncoherent and coherent light

Image sequences of the surface of disordered layers of porous medium (paper) obtained under noncoherent and coherent illumination during capillary rise of a liquid are analyzed. As a result, principles that govern the critical behavior of the interface between liquid and gaseous phases during its pinning are established. By a cumulant analysis of speckle-modulated images of the surface and by the statistical analysis of binarized difference images of the surface under noncoherent illumination, it is shown that the macroscopic dynamics of the interface at the stage of pinning is mainly controlled by the power law dependence of the appearance rate of local instabilities (avalanches) of the interface on the critical parameter, whereas the growth dynamics of the local instabilities is controlled by the diffusion of a liquid in a layer and weakly depends on the critical parameter. A phenomenological model is proposed for the macroscopic dynamics of the phase interface for interpreting experimental data. The values of critical indices are determined that characterize the samples under test within this model. These values are compared with the results of numerical simulation for discrete models of directed percolation corresponding to the Kardar-Parisi-Zhang equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the granule size in porous silicon on the photosensitization efficiency of molecular oxygen on the surface of silicon nanocrystals

Photoluminescence is used to study the effect of the granule size in porous silicon on the generation efficiency of the excited state of molecular oxygen ({sup 1}O{sub 2}) on the surface of silicon nanocrystals. The generation efficiency is found to increase as the granule size becomes smaller than 100 nm, which can be explained by a change in the conditions of exciton diffusion along a network of silicon nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamical Theory of X-Ray Diffraction for Restricted Beams: II. Diffuse Scattering by a Porous Crystal

A theory of X-ray diffuse scattering of restricted beams by a porous crystal is developed. Models of cylindrical and ellipsoidal pores, as well as the pores in the form of rectangular and triangular prisms, are considered. For these pores, the expressions for correlation eigenfunctions, static Debye—Weller factors, and correlation volumes are derived. The effect of the inclination and spatial correlation of pores on the equal-intensity diffuse-scattering contours is analyzed. The influence of the pore size fluctuation on the scattered intensity distribution is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of parameters of interaction of hydrogen isotopes with liquid lithium and lithium capillary-porous system under reactor irradiation

In this study, the effect of reactor irradiation on the processes of interaction of hydrogen with liquid lithium and a lithium capillary-porous system (CPS) is considered. The experiments are carried out by the gas-absorption method with use of a specially designed ampoule device. The results of investigation of the interaction of hydrogen with liquid lithium and a lithium CPS under conditions of reactor irradiation are described; namely, these are the temperature dependences of the rate constant for the interaction of hydrogen with liquid lithium at different reactor powers, the activation energies of the processes, and the pre-exponential factor in the Arrhenius dependence. The effect of increasing absorption of hydrogen by the samples under investigation as a result of the reactor irradiation is fixed. The effect can be explained by increasing mobility of hydrogen in liquid lithium due to hot spots in lithium bulk and the interaction of helium and tritium ions (formed as a result of the nuclear reaction of {sup 6}Li with neutron) with a surface hydride film.

36 MATERIALS SCIENCE↗

Comparative analysis of the possibility of applying low-melting metals with the capillary-porous system in tokamak conditions

The use of capillary-porous systems (CPSs) with liquid Li, Ga, and Sn is considered as an alternative for solving the problem of creating plasma-facing elements (PFEs) of the fusion neutron source (FNS) and the DEMO-type reactor. The main advantages of CPSs with liquid metal compared with hard materials are their stability with respect to the degradation of properties in tokamak conditions and capability of surface self-restoration. The evaluation of applicability of liquid metals is performed on the basis of the analysis of their physical and chemical properties, the interaction with the tokamak plasma, and constructive and process features of in-vessel elements with CPSs implementing the application of these metals in a tokamak. It is shown that the upper limit of the PFE working temperature for all low-melting metals under consideration lies in the range of 550–600°Ð¡. The decisive factor for PFEs with Li is the limitation on the admissible atomic flux into plasma, while for those with Ga and Sn it is the corrosion resistance of construction materials. The upper limit of thermal loads in the steady-state operating mode for the considered promising PFE design with the use of Li, Ga, and Sn is close to 18–20 MW/m{sup 2}. It is seen from the analysis that the use of metals with a low equilibrium vapor pressure of (Ga, Sn) gives no gain in extension of the region of admissible working temperatures of PFEs. However, with respect to the totality of properties, the possibility of implementing the self-restoration and stabilization effect of the liquid surface, the influence on the plasma discharge parameters, and the ability to protect the PFE surface in conditions of plasma perturbations and disruption, lithium is the most attractive liquid metal to create CPS-based PFEs for the tokamak.

36 MATERIALS SCIENCE↗

Diagnostics of jet structures formed in the plasma corona during the irradiation of porous targets by intense laser pulses

Jet structures formed during laser irradiation of porous targets with an average density of {rho} = 1-30 mg/cm{sup 3} were studied experimentally by using the diagnostic complex of the Mishen facility. To study complicated plasma structures, the experimental data were processed using specially elaborated mathematical methods. The probability of the emergence of jet plasma structures in plane open-pore triacetate cellulose targets was studied as a function of the parameter {rho}d, where {rho} is the average mass density and d is the target thickness. Analysis of the experimental results and their comparison with the existing data on the jet structures formed during laser irradiation of solid-density targets allowed the authors to reveal the characteristic features and mechanisms of the development of large-scale plasma jets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-Vessel Devices Based on Capillary-Porous Systems with Liquid Metal for a Stationary Tokamak

The experience gained in developing, creating, and testing prototypes of stationary in-vessel devices based on capillary-porous systems with liquid lithium for the T-11M, T-10, KTM, and FTU tokamaks is presented. A promising scheme is proposed for designing liquid-metal-based in-vessel components with heat removal for thermonuclear reactors of the DEMO type and thermonuclear neutron sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ar + H{sub 2} Plasma Interacting with Lithium-Filled Capillary Porous Structure

Ar + H{sub 2} plasma interacting with liquid lithium was carried out on a one-cathode linear plasma device (SCU-PSI). The lithium sample was covered with capillary porous structure (CPS). It is found that the electron temperature of applied plasma ranged from ~0–1 eV and electron density ranged from 0.1 × 10{sup 20} to 1 × 10{sup 20} m{sup −3}. The experimental results indicate that a reduction in the electron temperature and the lithium evaporation is found as the percentage of H{sub 2} increases When the ratio of argon and hydrogen keeps constant, the electron temperature and lithium evaporation increase with applied input power, respectively. The retention of hydrogen atoms in lithium surface results in reducing the lithium evaporation. The XRD analysis result shows that during plasma radiation no LiH is formed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Local etching of silicon using a solid mask from porous aluminum oxide

Technological features of nanoprofiling of silicon protected by a solid mask made of porous aluminum oxide are considered. It is shown that the method based on bombarding structures with accelerated neutral atoms (in particular, argon atoms) is efficient for etching through this mask.

36 MATERIALS SCIENCE↗

Effect of halogens on the formation and properties of the porous silicon layers

The method of atomic-force microscopy is used to study the morphology of the surface of porous silicon layers formed on the p-Si substrate and obtained by anodic etching in an electrolyte with addition of free halogens (bromine, iodine) and potassium halogenides (KCl, KI). It is established that the presence of halogens in the electrolyte is conducive to formation of large pores with the diameter as large as 150 nm. The mechanism of an increase in the pore sizes with involvement of halogens is related to an increase in the concentration of free holes due to formation of donor-acceptor pairs in the case of adsorption of halogens on the silicon surface.

36 MATERIALS SCIENCE↗

Detection of singlet oxygen in photoexcited porous silicon nanocrystals by photoluminescence measurements

Luminescence of gas-phase singlet oxygen optically sensitized by microporous silicon at room temperature is detected for the first time. At the same time, a photoinduced increase in the photoluminescence intensity of defects at the sample surface in oxygen atmosphere is observed. It is shown that mechanical grinding of porous silicon layers yields a decrease in the amount of photogenerated singlet oxygen.

36 MATERIALS SCIENCE↗

Free-standing luminescent layers of porous silicon

Free-standing layers of porous silicon with a thickness ranging from 50 to 200 {mu}m have been fabricated using an electrolyte composed of HF and acetic acid. Chemical aspects of the etching process associated with the evolution of gases that favor detachment of layers from substrates are considered. The layers exhibit stable photoluminescence in the visible spectral region observed from both of their sides.

36 MATERIALS SCIENCE↗

Enhancement of photoluminescence and raman scattering in one-dimensional photonic crystals based on porous silicon

In porous-silicon-based multilayered structures that exhibit the properties of one-dimensional photonic crystals, an increase in the photoluminescence and Raman scattering intensities is observed upon optical excitation at the wavelength 1.064 {mu}m. When the excitation wavelength falls within the edge of the photonic band gap of the structures, a multiple increase (by a factor larger than 400) in the efficiency of Raman scattering is detected. The effect is attributed to partial localization of excitation light and, correspondingly, to the much longer time of interaction of light with the material in the structures.

36 MATERIALS SCIENCE↗