Search NASA⌕ Search

SEARCH · Search NASA

Results for “Property optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Optimizing TaO{sub x} memristor performance and consistency within the reactive sputtering “forbidden region”

Standard deposition processes for depositing ReRAM oxides utilize mass flow of reactive gas to control stoichiometry and have difficulty depositing a precisely defined sub-stoichiometry within a “forbidden region” where film properties are discontinuous with mass flow. We show that by maintaining partial pressure within this discontinuous “forbidden region,” instead of by maintaining mass flow, we can optimize tantalum oxide device properties and reduce or eliminate the electroforming step. We also show that defining the partial pressure set point as a fraction of the “forbidden region” instead of as an absolute value can be used to improve wafer-to-wafer consistency with minimal recalibration efforts.

36 MATERIALS SCIENCE↗

Fabrication and durability characterization of superhydrophobic and lubricant-infused surfaces

Hypothesis: Practical applications of non-wetting surfaces require good mechanical durability in the wet environments for which they are intended to be used. Durability of non-wetting surfaces is influenced by the surface features, interaction with the functionalization agent, and the lubricant properties that can be tuned independently to identify optimal combination. Experiments: In this study, superhydrophobic and lubricant-infused surfaces are fabricated on copper tubes using chemical etching and electrodeposition texturing techniques, six different functionalizing agents, and five different infused lubricants. Through 180 fabrication combinations and 102 durability tests, each parameter is systematically studied for contributions to initial non-wetting behavior and its durability in heated, wet environment, under high-energy water jet impingement, and under accelerated flow conditions. Findings: Among the adsorbing and curing functionalization agents investigated, n-Hexadecyl mercaptan that belongs to the sulfhydryl group and Sylgard-184, respectively, showed high durability in heated water immersion and under jet impingement tests. For lubricant-infused surfaces, lubricants with high surface tension demonstrated high durability in heated water immersion test, whereas durability in hydrodynamic conditions is closely correlated to lubricant viscosity. Results showed that a lubricant-infused surface will maintain its non-wetting properties in dropwise condensation conditions for approximately 1.5 years.

36 MATERIALS SCIENCE↗

Analytic energy gradient of excited electronic state within TDDFT/MMpol framework: Benchmark tests and parallel implementation

The time-dependent density functional theory (TDDFT) has become the most popular method to calculate the electronic excitation energies, describe the excited-state properties, and perform the excited-state geometric optimization of medium and large-size molecules due to the implementation of analytic excited-state energy gradient and Hessian in many electronic structure software packages. To describe the molecules in condensed phase, one usually adopts the computationally efficient hybrid Quantum Mechanics/Molecular Mechanics (QM/MM) models. Here, we extend our previous work on the energy gradient of TDDFT/MM excited state to account for the mutual polarization effects between QM and MM regions, which is believed to hold a crucial position in the potential energy surface of molecular systems when the photoexcitation-induced charge rearrangement in the QM region is drastic. The implementation of a simple polarizable TDDFT/MM (TDDFT/MMpol) model in Q-Chem/CHARMM interface with both the linear response and the state-specific features has been realized. Several benchmark tests and preliminary applications are exhibited to confirm our implementation and assess the effects of different treatment of environmental polarization on the excited-state properties, and the efficiency of parallel implementation is demonstrated as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic layer deposition growth of a novel mixed-phase barrier for seedless copper electroplating applications

A novel plasma-enhanced atomic layer deposition-grown mixed-phase/nanolaminate Ru-TaN barrier has been investigated, and it was confirmed that the copper diffusion barrier and direct-plate characteristics of the mixed-phase barrier can be modulated by varying the metal ratio in the film. This liner was subsequently optimized to yield a composition that combines the robust barrier properties of TaN with direct-plate characteristics of Ru. It was found that the deposited multicomponent system consists of individual crystalline and amorphous phase regions distributed across the barrier. The resulting optimized mixed-phase barrier was found to exhibit excellent copper diffusion barrier characteristics in layers as thin as 2 nm. A high degree of (111) texture (>84%) was observed for the direct-plated copper on this Ru-TaN barrier, which was very similar to the electroplated Cu deposited on a physical vapor deposition copper-seed control sample. Additionally, the filling characteristics in sub-50-nm features were found to be equivalent to those of conventionally copper-seeded interconnect structures.

36 MATERIALS SCIENCE↗

Structural anisotropy in Sb thin films

Sb thin films have attracted wide interest due to their tunable band structure, topological phases, high electron mobility, and thermoelectric properties. We successfully grow epitaxial Sb thin films on a closely lattice-matched GaSb(001) surface by molecular beam epitaxy. We find a novel anisotropic directional dependence on their structural, morphological, and electronic properties. The origin of the anisotropic features is elucidated using first-principles density functional theory (DFT) calculations. The growth regime of crystalline and amorphous Sb thin films was determined by mapping the surface reconstruction phase diagram of the GaSb(001) surface under Sb 2 flux, with confirmation of structural characterizations. Crystalline Sb thin films show a rhombohedral crystal structure along the rhombohedral (211) surface orientation parallel to the cubic (001) surface orientation of the GaSb substrate. At this coherent interface, Sb atoms are aligned with the GaSb lattice along the [1̄10] crystallographic direction but are not aligned well along the [110] crystallographic direction, which results in anisotropic features in reflection of high-energy electron diffraction patterns, misfit dislocation formation, surface morphology, and transport properties. Our DFT calculations show that the preferential orientation of the rhombohedral Sb (211) plane may originate from the GaSb surface, where Sb atoms align with the Ga and Sb atoms on the reconstructed surface. The formation energy calculations confirm the stability of the experimentally observed structures. Our results provide optimal film growth conditions for further studies of novel properties of Bi 1-x Sb x thin films with similar lattice parameters and an identical crystal structure, as well as functional heterostructures of them with III–V semiconductor layers along the (001) surface orientation, supported by a theoretical understanding of the anisotropic film orientation.

36 MATERIALS SCIENCE↗

Impact of K-Optimization on Trap Concentration in (Ag,Cu)(In,Ga)Se 2 Solar Cells

Recent progress has been made in improving efficiency in Cu(In,Ga)Se 2 (CIGS) absorbers with steady increases in peak efficiency. One way this has been achieved is by adding Ag to CIGS (ACIGS) to achieve higher V OC . However, these efficiencies are still well below the Shockley-Queisser efficiency limit, and traps acting as recombination centers and compensating centers are one thing limiting the solar efficiency. Past research in CIGS has shown that alkali treatment can improve the efficiency and metastability problems in CIGS, but less is understood about the role of alkali treatments in ACIGS. Here, we investigate the impact of potassium in ACIGS through its impact on trap incorporation and minority carrier lifetime. The samples in this study were grown in a roll-to-roll coater with Mo, ACIGS, CdS, and ZnO structure. Both cells were grown identically except the second (K-optimized) cell was grown with increased K-doping of the Mo contact and was more Cu-poor near the surface to optimize the K profile. This resulted in an efficiency increase from 16.8% to 18.7% for the K-optimized cell, which was mostly due to a 65 mV V OC increase. The doping profile showed a 2X increase in acceptor concentration of the K-optimized cell (2.5×10 15 cm -3 ) which suggests that the K was better incorporated into the ACIGS after these optimizations. To characterize the traps in these cells, deep level transient and optical spectroscopy were used. The DLOS measurements showed an EV+0.98 eV trap whose concentration was reduced 10X in the K-optimized cell (4×10 14 cm -3 ). This is consistent with previous results from the alkali treatment in CIGS, which also showed a decrease in near-conduction band trap concentration [1], but the reduction was larger than previous studies possibly indicating the combination of K and Cu-poor surface may both have aided in reducing the EV+0.98 eV trap concentration. The other primary trap is the mid-gap trap (EV+0.58 eV), which was quantified using DLTS. Its concentration decreased from 9×10 13 cm -3 to 4×10 13 cm -3 in the K-optimized sample, which is a 2X reduction. Previous studies have shown this trap is likely an efficient recombination center [2], which makes sense because it is near mid-gap. This trap has also been associated with V OC instability and reduction, so reducing this trap concentration is essential to achieve high V OC and cell efficiency. To help confirm this association, time-resolved photoluminescence measurements have shown in this sample set and a previous study that the minority carrier lifetime (19 ns baseline to 56 ns K-optimized) and this EV+0.56 eV trap concentration are inversely proportional, which would be expected for a recombination-limited carrier lifetime. The K optimization of ACIGS results in significantly improved cell efficiency and reduced trap concentrations that correlate with the improved material and electrical properties. We will report on this and the impact of the K optimization on the cell metastability.

14 SOLAR ENERGY↗

Uniting Surface Properties With Hydrodynamic Roughness in Shallow Overland Flow Models

Describing flow resistance from the properties of an underlying surface is a challenge in surface hydrology. Runoff models must specify a resistance formulation or “roughness scheme”—describing the functional relationship between flow resistance and flow depth/velocity—and its parameters. Uncertainty in runoff predictions derives from both the selected roughness scheme (e.g., Darcy Weisbach, Manning's, or laminar flow equations), and its parameterization with a roughness coefficient (e.g., Manning's n). Both choices are informed by model calibration to data, usually discharge, and, if available, velocity. In this study, a Saint Venant Equation-based runoff model is calibrated to discharge and velocity data from 112 rainfall simulator experiments. The results are used to identify the optimal roughness scheme among four widely-used options for each experiment, and to explore whether surface properties can be used to select the optimal roughness scheme and its coefficient. Among the tested roughness schemes, a transitional flow equation provided the best fit to the plurality of experiments. The most suitable roughness scheme for a given experiment was not related to measured surface properties. Regression models predicted the calibrated roughness coefficients with adjusted values between 0.48 and 0.54, depending on the roughness scheme used. Litter cover was the best predictor of the roughness coefficient, followed by soil cover and average canopy gap size. The results suggest that selection of an optimal roughness scheme based on surface properties alone remains difficult, but that once a scheme is selected, roughness coefficients can be estimated from surface properties.

54 ENVIRONMENTAL SCIENCES↗

The IDAES process modeling framework and model library—Flexibility for process simulation and optimization

Abstract Energy systems and manufacturing processes of the 21st century are becoming increasingly dynamic and interconnected, which require new capabilities to effectively model and optimize their design and operations. Such next generation computational tools must leverage state‐of‐the‐art techniques in optimization and be able to rapidly incorporate new advances. To address these requirements, we have developed the Institute for the Design of Advanced Energy Systems (IDAES) Integrated Platform, which builds on the strengths of both process simulators (model libraries) and algebraic modeling languages (advanced solvers). This paper specifically presents the IDAES Core Modeling Framework (IDAES‐CMF), along with a case study demonstrating the application of the framework to solve process optimization problems. Capabilities provided by this framework include a flexible, modifiable, open‐source platform for optimization of process flowsheets utilizing state‐of‐the‐art solvers and solution techniques, fully open and extensible libraries of dynamic unit operations models and thermophysical property models, and integrated support for superstructure‐based conceptual design and optimization under uncertainty.

42 ENGINEERING↗

Development of Advanced 9Cr Ferritic-Martensitic Steels and Austenitic Stainless Steels for Sodium-Cooled Fast Reactor

Ferritic-martensitic (FM) steel Grade 92, with or without thermomechanical treatment (TMT), and austenitic stainless steels HT-UPS (high-temperature ultrafine precipitate strengthening) and NF709 were selected as potential candidate structural materials in the U.S. Sodium-cooled Fast Reactor (SFR) program. The objective is to develop advanced steels with improved properties as compared with reference materials such as Grade 91 and Type 316H steels that are currently in nuclear design codes. Composition modification and/or processing optimization (e.g., TMT and cold-work) were performed to improve properties such as resistance to thermal aging, creep, creep-fatigue, fracture, and sodium corrosion. Testings to characterize these properties for the advanced steels were conducted by the Idaho National Laboratory, the Argonne National Laboratory and the Oak Ridge National Laboratory under the U.S. SFR program. This paper focuses on the resistance to thermal aging and creep of the advanced steels. The advanced steels exhibited up to two orders of magnitude increase in creep life compared to the reference materials. Preliminary results on the weldment performance of the advanced steels are also presented. The superior performance of the advanced steels would improve reactor design flexibility, safety margins and economics.

Sham, Sam↗

Improving Additive Manufactured Component Performance through Multi-Scale Microstructure Simulation and Process Optimization

The purpose of this project was to utilize computational tools to understand the relationships between processing, microstructure, and properties for additively manufactured (AM) aluminum alloys for automotive applications, and to provide an engineering solution for helping to optimize process conditions. The project leverages ORNL developments in computational modeling, including AM process modeling, phase-field based microstructure evolution predictions, and data analytics techniques for mapping process conditions to material outcomes. The project utilized an Al-Cu-Mn-Zr alloy as a model material for studying formation of defects and microstructural features in response to variations in process conditions. Based on both pre-existing experimental data and simulation results, statistical process maps were constructed to identify regions of process space with minimal defect formation and advantageous microstructures and properties. The software tools used for this purpose were successful disseminated to GM, who were able to successful compile the relevant HPC codes within their own computing ecosystem and perform initial calculations to reproduce ORNL results.

36 MATERIALS SCIENCE↗

Extrusion parameter control optimization for DIW 3D printing using image analysis techniques

Material extrusion is a well-recognized facet of additive manufacturing that involves the fabrication of parts through the deposition of structural material from an extrusion head from a bulk supply. In the subdivision of Direct Ink Writing (DIW) additive manufacturing, challenges arise when the structural material is flowable, synchronous extrusion control and tool movement becomes critical for achieving high-quality parts with low defect populations. DIW techniques are most used in laboratory settings using expensive custom instruments and may require specialized 3D slicing software. Here, in this study, the fabrication of an inexpensive, consumer-friendly progressive cavity pump dispensing system is detailed, in which can create high-quality parts by executing G-code commands produced from a commercial slicing software. The precision and repeatability of the movement-synchronized material extrusion is demonstrated through a series of optimization schemes, entailing the alteration of various control parameters, which directly affect the extrusion properties demonstrated during a print. In situ diagnostics were implemented to evaluate the results of the established optimization experiment. Using a machine vision technique, images of the optimization prints are processed. Following this, a supervised machine learning model was trained to autonomously judge whether or not the extrusion parameters produced a passing or failing result. The machine learning scheme serves as a preliminary benchmark for future layer-by-layer evaluation of more complex DIW parts. The construction of the printer and development of in situ characterization capabilities demonstrates the ability for this printer to create high-fidelity DIW parts for a fraction of the price of other systems.

42 ENGINEERING↗

A numerical study on the sooting tendencies of bio-derived fuels for spark-ignition engines

While more efficient vehicles have been developed over the decades, their performance is limited by the properties of existing fuels. In response, the Co-Optimization of Fuels and Engines Initiative (Co-Optima) under the U.S. Department of Energy (DOE) has developed a rigorous screening approach to identify the most promising biomass-derived blendstocks that are suitable for advanced spark-ignition (SI) engines. A detailed kinetic model has also been developed to predict the combustion properties of the selected blendstocks. This kinetic model has been designed mainly targeting ignition and flame propagation properties, and it has not previously been validated for soot formation. In this work, we numerically predicted the sooting tendency of 20 Co-Optima SI blendstocks using the Co-Optima kinetic model. The sooting tendencies are determined quantitatively using the Yield Sooting Index (YSI) methodology. As shown in Fig. 1, the predicted YSIs show good agreement with measurements, except for 2,5-dimethylfuran. We also quantify the sensitivity of the YSI predictions to aromatic growth reactions and fuel decomposition reactions of the test fuels. It is found that PAH growth reactions have little impact on YSIs for all 20 fuels under investigation. On the other hand, fuel decomposition reactions have a significant influence on the YSI of 2,5-dimethylfuran. Perturbing their reaction rates by a factor of two is shown to lead to 11 % YSI prediction uncertainty.

09 BIOMASS FUELS↗

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗

Atomic Structure and Electronic Properties of Anionic Germanium–Zirconium Clusters

This paper presents spatial structure optimization results and calculated electronic spectra for ZrGe{sub n}{sup −} (n = 8–20) anion clusters. Comparison of density-functional calculation results and available experimental data allows us to identify real spatial structures of the clusters. The formation of stable endohedral ZrGe{sub n}{sup −} clusters is possible for n ≥ 12. The clusters with a smaller number of germanium atoms predominantly have exohedral structures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Deployment of Alumina Forming Austenitic (AFA) Stainless Steel

The purpose of the project was to accelerate the deployment and further the development of a new family of heat-resistant alloys developed at ORNL: alumina-forming austenitic (AFA) stainless steels. Initial laboratory scale evaluation indicated that AFA alloys possess exceptional high-temperature oxidation resistance while retaining creep properties similar to other advanced austenitic stainless steels. The AFA steels therefore represent a low-cost alternative to Ni-base alloys and a high performance alternative to conventional advanced austenitic steels. Deployment of AFA steels into turbine and other energy-related applications can lead to improved efficiencies by achieving higher operating temperatures and/or improved durability and component lifetime at costs comparable to currently used alloys. The development and scale up of optimized AFA alloy compositions in both wrought and cast forms, including generation of a database of thermo-physical, mechanical, welding/joining, and high-temperature corrosion properties was needed to enable consideration and adoption of these new materials in applications ranging from turbines, heat exchangers, and fuel cells to boilers and chemical/petrochemical processing. The project consisted of four primary tasks: commercial demonstrations, property database development, alloy development and optimization and evaluation of as-cast properties.

Alumina Forming Ausenitic Steel↗

Effect of the tensor part of Skyrme interaction on the description of elastic nucleon-nucleus scattering on the basis of the optical model

A microscopic optical nucleon-nucleus potential constructed on the basis of calculating the mass operator for the single-particle Green's function with Skyrme nucleon-nucleon forces was used to study the effect of the tensor part of Skyrme forces on describing differential cross sections for elastic nucleon-nucleus scattering and the structure of nuclei within a self-consistent approach. It was shown that an increase in the tensor terms of nucleon-nucleon forces impaired the description of nucleon-nucleus scattering within the model being considered. The parameters of Skyrme forces were optimized on the basis of an analysis of cross sections for neutron-nucleus scattering, the properties of nuclear matter and the structure of nuclei being tested in doing this. This optimization led to nucleon-nucleon force versions where the tensor part was small or zero and which described satisfactorily the structure of nuclei and cross sections for elastic neutron and proton scattering on nuclei over a broad range of target mass numbers.

74 ATOMIC AND MOLECULAR PHYSICS↗

Highly efficient deep desulfurization of fuels by meso/macroporous H3PW12O40/TiO2 at room temperature

Highlights: • A new kind of meso/macroporous structured HPW/TiO{sub 2} catalyst was prepared by monodispersed polystyrene spheres and quaternary ammonium bromide. • Quaternary ammonium bromide with longer alkyl chains length (STAB) was found to be the best mesostructure-directing agent in the synthesis of meso/macroporous HPW/TiO{sub 2} catalyst. • The influence of dosage of macroporous templates (monodispersed polystyrene spheres) and alkyl chains length of quaternary ammonium bromide on the textural of meso/macroporous HPW/TiO{sub 2} catalyst were investigated. • With proper PS spheres and quaternary ammonium bromide usage, disordered macropores arranged periodicity and led relatively larger pore size and pore volume. • The meso/macroporous HPW/TiO{sub 2} materials exhibited enhanced excellent desulfurization performance of thiophenic sulfur in model fuel than other samples. Dibenzothiophene can be completely removed within 2 h at 30 °C. - Abstract: This paper described the synthesis of meso/macroporous phosphotungstic acid (HPW) /TiO{sub 2} catalyst with quaternary ammonium bromide and monodispersed polystyrene spheres (PS) as dual-template. The synthetic parameters, such as concentration of the templates and the alky chain length of quaternary ammonium bromide was studied carefully and optimized to generate catalyst with regulated porous features. The chemical properties of the catalyst was also investigated, X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) measurements confirmed the Keggin-type HPW were highly dispersed on the TiO{sub 2} framework. The optimal meso/macroporous HPW/TiO{sub 2} catalyst exhibited excellent catalytic activity in the oxidation of refractory sulphur compounds such as benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). DBT was removed within 2 h at 30 °C under selected reaction conditions and the apparent activation energy for DBT oxidation was calculated to be 45.7 kJ/mol. The high ODS reaction rate of catalyst could be attributed to the combination of unique meso/macroporous architecture allowing for efficient mass transport of reactants and products in pore channel and its high surface area, large mesoporous size, and pore volume enabling sufficient exposure of catalytic active sites. Moreover, the meso/macroporous HPW/TiO{sub 2} catalyst also exhibited excellent reusability with no obviously degradation even after eight cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗