Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Calibration procedures for measurement of reflectance factor in remote sensing field research

A means by which measurements of the optical properties of crops and soils can be knowledgeably compared from site to site and instrument to instrument is presented in detail. The definition of bidirectional reflectance factor is reviewed and discussed. Procedures for field implementation are illustrated and discussed. Spectral and goniometric properties of laboratory and field reference surfaces and typical environmental subjects serve as a basis for analysis of uncertainties introduced by differing illumination conditions. Results of a comparison of the performance of three spectrometer systems are presented and discussed. It is concluded that intelligent use of the bidirectional reflectance factor technique is an accurate and practical means to obtain the spectral, optical properties of crops and soils needed for advancements in agricultural remote sensing.

Robinson, B. F.↗

Surface reflectance measurements in the UV from an airborne platform. I

The reflectance of naturally occurring surfaces is measured from a twin engine Cessna 402B aircraft both spectrally (0.29-0.40 micron) with a compact double monochromator and broadband (0.29-1.2 micron) with a UV enhanced photodiode. The measurement system, which is computer controlled and electrically isolated from the aircraft, consists of upward and downward looking hemispheric diffusers, filters, a rotating 90 deg mirror, a focusing lens, and a double monochromator/PMT or the UV photodiode. Measurements are taken at several altitudes enabling the empirical determination of backscatter and attenuation effects on the reflectance. The results are presented for pine forest canopy, green farmland, open ocean, and brown farmland as a function of wavelength and altitude.

Doda, D. D.↗

Energization of solar wind ions by reflection from the earth's bow shock

The existence of ion beams with energies a few times the solar wind energy and streaming outward from the earth's bow shock has been known for some time. To explain the observed ion energies, a simple reflection model has been proposed in which the particles gain energy by displacement parallel to the interplanetary electric field. In this model the energy gained in the reflection can be described as a function of the angles between the interplanetary magnetic field, the solar wind velocity, and the local shock normal. Ion beams under widely varying conditions have been observed in ISEE 1 and 2. For 18 cases, with beam energies ranging from approximately 1.4 to 30 times the solar wind energy, a comparison between the observed and the predicted beam energies has been made.

Paschmann, G.↗

Spectral reflectance and discrimination of plutonic rocks in the 0.45- to 2.45-micron region

Visible and near-infrared field spectral reflectance measurements of plutonic rocks were acquired in the 0.45- to 2.45-micron region with a portable field reflectance spectrometer. These spectra were used to determine spectral signatures for the various rock types and to evaluate the separability of these rocks based on their spectral characteristics. A total of 135 samples were divided into 11 groups based on their mineralogy. These 11 groups approximately correspond to traditional rock classifications and include five granitic groups, three gabbroic groups, and three ultramafic groups. The positions, intensity, and presence of iron, CO3(-2), and Al-OH and Mg-OH absorption bands varied among the 11 groups. Each rock group also had a range of albedos characteristic of the group. Stepwise linear discriminant analysis was performed on the spectral data to determine the separability of the 11 groups. Classification accuracy for 30 equally spaced wavelength bands between 0.45 and 2.45 microns was 78% with 10% serious misclassifications. The same analysis was repeated, limiting the spectral data to the wavelength regions corresponding to the proposed Landsat D thematic mapper scanner.

Blom, R. G.↗

Electron reflection and secondary emission characteristics of sputter-textured pyrolytic graphite surfaces

Low secondary and reflected primary electron emission from the collector electrode surfaces is important for optimum collector efficiency and hence for high overall efficiency of microwave amplifier tubes used in communication satellites and in military systems. Ion sputter texturing of the surface effectively suppresses electron emission from pyrolytic graphite, which is a promising collector electrode material. Secondary and reflected primary electron emission characteristics of sputter textured pyrolytic graphite surfaces with microstructures of various sizes and densities are presented. The microstructure with the lowest electron emission levels, less than those of soot, consists of a dense array of tall, thin spires.

Wintucky, E. G.↗

Relationships between diffuse reflectance and vegetation canopy variables based on the radiative transfer theory

Out of the lengthy original expression of the diffuse reflectance formula, simple working equations were derived by employing characteristic parameters, which are independent of the canopy coverage and identifiable by field observations. The typical asymptotic nature of reflectance data that is usually observed in biomass studies was clearly explained. The usefulness of the simplified equations was demonstrated by the exceptionally close fit of the theoretical curves to two separately acquired data sets for alfalfa and shortgrass prairie canopies.

Park, J. K.↗

The changes in leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) in response to heavy metal stress

The effects of heavy metal stress on leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) are examined. It is found that sugar maple seedlings treated with anomalous amounts of heavy metals in the rooting medium exhibited an increased leaf reflectance over the entire range of investigated wavelengths, from 475 to 1650 nm. These results conform to those of a previous investigation in the wavelengths from 475 to 660nm, but tend to contradict the previous study in the near infrared wavelengths from 1000 to 1650nm. The differences may possible be due to different water regimes in the two investigations.

Schwaller, M. R.↗

The damping of seismic waves and its determination from reflection seismograms

The damping in theoretical waveforms is described phenomenologically and a classification is proposed. A method for studying the Earth's crust was developed which includes this damping as derived from reflection seismograms. Seismic wave propagation by absorption, attenuation of seismic waves by scattering, and dispersion relations are considered. Absorption of seismic waves within the Earth as well as reflection and transmission of elastic waves seen through boundary layer absorption are also discussed.

Engelhard, L.↗

An experimental study of transmission, reflection and scattering of sound in a free jet flight simulation facility and comparison with theory

When a free jet (or open jet) is used as a wind tunnel to simulate the effects of flight on model noise sources, it is necessary to calibrate out the effects of the free jet shear layer on the transmitted sound, since the shear layer is absent in the real flight case. In this paper, a theoretical calibration procedure for this purpose is first summarized; following this, the results of an experimental program, designed to test the validity of the various components of the calibration procedure, are described. The experiments are conducted by using a point sound source located at various axial positions within the free jet potential core. By using broadband excitation and cross-correlation methods, the angle changes associated with ray paths across the shear layer are first established. Measurements are then made simultaneously inside and outside the free jet along the proper ray paths to determine the amplitude changes across the shear layer. It is shown that both the angle and amplitude changes can be predicted accurately by theory. It is also found that internal reflection at the shear layer is significant only for large ray angles in the forward quadrant where total internal reflection occurs. Finally, the effects of sound absorption and scattering by the shear layer turbulence are also examined experimentally.

Ahuja, K. K.↗

Bidirectional reflectance spectroscopy. II - Experiments and observations

Aspects of the theoretical bidirectional reflectance expression derived by Hapke (1981) are studied experimentally, and it is shown that the expression describes satisfactorily the measured angular scattering and spectral properties of a cobalt glass powder in which the two properties vary greatly with wavelength. The theoretical reflectance function also describes measured distributions of intensity across the surfaces of planets, except near the sunlit limb, where the macroscopic roughness influences the brightness.

Hapke, B.↗

Asymptotic solution for the reflectivity of a very rough surface

Asymptotic solutions for the reflectivity of a very rough surface are obtained in closed form up to second order in variance of slope. The zeroth-order solution gives the reflectivity of a specular surface and the sum of the higher-order terms yields the net effect of the rough surface. Within the common regions of validity of small rms slope and incident angle not close to grazing, the result agrees very well with those obtained with numerical methods.

Tsang, L.↗

Determination of growth stage from reflectance spectra of crops

The spectral reflectance characteristics of vegetation have been studied with the objective to learn how to extract useful information about the state of surface vegetation from space-borne observing systems, with emphasis on agricultural applications. Results of simulation studies based on high-resolution airborne spectrometer data indicate that changes in biomass, plant pigment, and leaf water content can be independently tracked by monitoring the reflective properties of vegetation with an appropriate selection of bands.

Ungar, S. G.↗

Far-infrared /FIR/ optical black bidirectional reflectance distribution function /BRDF/

A nonspecular reflectometer and its operation at far-infrared wavelengths are described. Large differences in nonspecular reflectance were found to exist between different optically black coatings. Normal incidence bidirectional reflectance distribution function /BRDF) measurements at wavelengths between 12 and 316 microns of three black coatings show that their mean BRDFs increase with wavelength. The specularity of two of these coatings also showed a strong wavelength dependence, while the specularity of one coating seemed independent of wavelength. The BRDF of one coating depended on the angle of incidence at 12 and 38 microns, but not at 316 microns. Beyond 200 microns, it was found necessary to correct the measurements for the beam spread of the instrument.

Smith, S. M.↗

Far-infrared properties of dust in the reflection nebula NGC 7023

Thermal emission from dust in the reflection nebula NGC 7023 has been observed at wavelengths between 40 and 400 microns. The observed far-infrared emission comes from a region approximately 4 arcmin in diameter and shows spatial structure which correlates well with the distribution of reflected visible radiation. Temperature and optical depth maps indicate that the dust which emits the far-infrared radiation is heated by UV and visual radiation from the central star (HD 200775) and that the dust density increases steeply northwest of the star. The far-infrared data are not consistent with either the spherical or uniform slab geometries used in earlier analyses of optical observations. Comparisons of the far-infrared measurements with optical and UV measurements give a value between 2000 and 5000 for the ratio of extinction efficiency in the UV to that at 125 microns. This value is compared with the results of other observational studies and with theoretical grain models.

Whitcomb, S. E.↗

Electron reflection and secondary emission characteristics of sputter-textured pyrolytic graphite surfaces

Measurements are presented of secondary electron emission and reflected primary electron characteristics of sputter-textured pyrolitic graphite surfaces with microstructures of various sizes and densities, made with an Auger cylindrical mirror analyzer in a high-vacuum chamber at pressures below 1.33 x 10 to the -7th N/sq m (10 to the -9th torr). A dense, tall, thin, spire-like microstructure, obtained at ion energies of 1000 eV and ion current densities of 5 mA/sq cm, is the most effective. The secondary electron emission from such a surface is lower than that of soot, whose secondary emission is among the lowest of any material. At a primary electron energy of 1000 eV, the secondary electron emission yield of smooth CU is about 350% greater than the lowest value obtained for sputter-textured pyrolitic graphite. The reflected primary electron index of smooth Cu is a factor of 80 greater. If the secondary electron emission yield is reduced to 0.3, which is possible with sputter-textured pyrolitic graphite, the traveling wave tube collector efficiency could be improved by as much as 4% over that for smooth copper.

Wintucky, E. G.↗

Characteristics of reflected and diffuse ions upstream from the earth's bow shock

The distinction between two types of upstream ion populations is made on the basis of pronounced differences in their distribution functions. The reflected ions represent a fast beam with temperatures typically one-million to five-million K and speeds up to five times the solar wind speed. An important feature of the reflected ion distributions is their strong temperature anisotropy, with perpendicular temperature exceeding parallel temperature by a factor of two or three. In contrast, the diffuse ions occupy a much larger region of phase space, both in energy and angle; their distribution function generally has the form of a circular ridge in two dimensions and a spherical shell in three dimensions. Accordingly, their temperature is much larger (not less than about 10-million K) and their bulk speed is typically smaller than the solar wind speed.

Paschmann, G.↗

Infrared reflection nebulae in S 106 and NGC 7538 E

Two micron linear polarimetry of the S 106 and NGC 7538 E regions reveal the presence of infrared reflection nebulae, which may confuse the count of luminosity sources in a region of star formation. S 106 and NGC 7538/IRS 9 are considered the only luminosity sources in their respective regions, and the polarization of S 106/Source 3 is probably due to absorption by aligned grains. Moreover, the reflection nebula model for NGC 7538 E is best supported if the polarization of NGC 7538/IRS 9 itself is due to the absorption by aligned grains.

Tokunaga, A. T.↗

Development of a digital data base for reflectance-related soil information

A digital soils data base established for inclusion of soil reflectance data, physical, chemical, and engineering measurements, and site information is discussed. Initial data are taken from 500 soil samples covering the spectral range of 0.5 to 2.3 microns. Information obtained from each observation includes spectral data, and identification records with the soil and spectral observation parameters. The LARSPEC software system is available to retrieve and manipulate information, and scattergrams of identification and spectral data allow the initiation of statistical analyses of soil data. In addition, soil characteristics, graphical displays of reflectance spectra, and identification information examples are given.

Stoner, E. R.↗