Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stack Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

99 Mo Production Plant Layout

The NorthStar Medical Technologies 99 Mo production facility configuration is envisioned to be 8 accelerator pairs irradiating 7 100 Mo targets (one spare accelerator pair undergoing maintenance while the other 7 pairs are irradiating targets). The required shielding in every direction for the accelerators is initially estimated to be 10 feet of concrete. With the accelerator pairs on one (ground) level and spaced with the required shielding between adjacent pairs, the only practical path for target insertion and removal while minimizing floor space is vertical. The current scheme then requires a target vertical lift of nominally 10 feet through a shield stack. It is envisioned that the lift will be directly into a hot cell where an activated target can be removed from its holder and a new target attached and lowered. The hot cell is on a rail system so that a single hot cell can service all active target locations, as well as deliver the ready targets to the separations lab. On this rail system, coupled to the hot cell, will be a helium recovery and clean-up system. All helium coolant equipment is located on the upper level near to the target removal point.

42 ENGINEERING↗

Light-Driven Charge Transfer in Face-to-Face Donor-Spacer-Acceptor Supramolecular Systems

The efficient conversion of sunlight to a useful form of energy both in green plants and in manmade dye-sensitized solar cells requires the efficient separation of a positive and negative charge. The charge separation process begins with the absorption of visible or ultraviolet light by a pigment such as chlorophyll or a dye such as a transition metal complex followed by fast electron transfer to a neighboring molecule to form a pair of ionized molecules with opposite charges. At that point, one of the two opposite charges must rapidly move away from the other one by the process of charge separation. Once the migrating charge reaches its destination, it can be converted to electrical or chemical energy. The overall efficiency of charge separation in these systems is determined by the competition between charge separation and charge recombination at each stage in the process. Whereas most investigations of photoinduced charge separation have employed synthetic polymers or covalent linkages to separate the photoactive molecular and charge acceptor, we have employed the natural biopolymer DNA for this purpose. DNA possesses a unique structure consisting of a hydrophobic core of hydrogen-bonded base pairs which form a one-dimensional π-stacked array. The possibility that the π-stacked base pairs of DNA might function as a one-dimensional conductor or molecular wire was first advanced over 50 years ago. However, systematic measurements of the dynamics and efficiency of charge separation in DNA-based systems were not undertaken prior to the initiation of our studies 22 years ago. A variety of organic chromophores can be attached to one or both ends of the base pair domain of DNA or at any location within the domain. The length and base sequence of the base pair domain can also be varied. The structures of these synthetic derivatives of DNA have been determined using a combination of X-ray diffraction, NMR spectroscopy, and molecular modeling. Selective excitation with UV or visible light of the appropriate chromophore can effect injection of either positive charge (holes) or negative charge (electrons) into the base pair domain. The dynamics of hole or electron injection can be studied by a combination of fluorescence quenching and transient absorption measurements. Moreover, the simple design of our systems is amenable to theoretical modeling, allowing the development and testing of models which may prove applicable to more complex systems. Our initial studies of hole transport in short synthetic DNA with either repeating or alternating base sequences showed it to be strongly distance dependent, seemingly contradicting claims that DNA might serve as a wire in molecular electron devices. Further research on the base-sequence dependence of hole transport dynamics showed that significant enhancement in hole transport dynamics could be achieved by the used of special sequences designed to prevent the photo-generated charges from recombining. More recent experimental research and theoretical modelling has served to define each stage of the charge-separation process: electronic excitation, hole injection, hole transport, hole transport, and charge recombination. DNA is less effective as a carrier for electron transport; however, many of these details have also been determined for this process. In summary, a combination of molecular design and synthesis, spectroscopy, and theory have made possible the most complete study of photoinduced charge separation on any complex donor-bridge-acceptor system studied to date. These results serve as a benchmark to which related studies can be compared.

14 SOLAR ENERGY↗

PEM Degradation Investigation Final Technical Report

The objectives of this paper are: (1) Develop a system capable of measuring current and voltage performance for each membrane in a Polymer Electrolyte Membranes (PEM) fuel cell stack and record the performance of each individual cell; (2) Develop a single cell PEM FC to allow in situ synchrotron x-ray measurements of the cell in operation and to perform spatially resolved x-ray measurements on fuel cell elements before and after degradation; and (3) Perform initial magnetic resonance microimaging experiments on membrane materials. The Montana State University PEM Membrane Degradation program is geared towards determining how and why membranes in fuel cells degrade and fail. By monitoring every individual membrane in a fuel cell 2000 times/sec while the cell is subjected to real-world type use, we hope to: (1) cause the types of degradation users see, but in a controlled environment; (2) determine an electrical signature that will identify what causes failure, or at least warns of impending failure; (3) allows us to perform advanced x-ray and MRI characterization of the degraded membranes to provide information that may result in improvements of the membrane material; and (4) perhaps allow design of electronic control systems that will prevent fuel cells from operating under conditions where damage is likely to occur.

30 DIRECT ENERGY CONVERSION↗

Improved accuracy and robustness of electron density profiles from JET’s X-mode frequency-modulated continuous-wave reflectometers

JET’s frequency-modulated continuous wave (FMCW) reflectometers have been operating well with the current design since 2005, and density profiles have been automatically calculated intershot since then. However, the calculated profiles had long suffered from several shortcomings: poor agreement with other diagnostics, sometimes inappropriately moving radially by several centimeters, elevated levels of radial jitter, and persistent wriggles (strong unphysical oscillations). Here, in this research, several techniques are applied to the reflectometry data analysis, and the shortcomings are significantly improved. Starting with improving the equilibrium reconstruction that estimates the background magnetic field, adding a ripple correction in the reconstructed magnetic field profile, and adding new inner-wall reflection positions estimated through ray-tracing, these changes not only improve the agreement of reconstructed profiles to other diagnostics but also solve density profile wriggles that were present during band transitions. Other smaller but also persistent wriggles were also suppressed by applying a localized correction to the measured beat frequency where persistent oscillations are present. Finally, the burst analysis method, as introduced by Varela et al., has been implemented to extract the beat frequency from stacked spectrograms. Due to the strong suppression of spurious reflections, the radial jitter that sometimes would span several centimeters has been strongly reduced. The stacking of spectrograms has also been shown to be very useful for stacking recurring events, like small gas puff modulations, and extracting transport coefficients that would otherwise be below the noise level.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In silico screening of metal–organic frameworks in separation applications

Porous materials such as metal–organic frameworks (MOFs) and zeolitic imidazolate frameworks (ZIFs) offer considerable potential for separating a variety of mixtures such as those relevant for CO₂ capture (CO₂/H₂, CO₂/CH₄, CO₂/N₂), CH₄/H₂, alkanes/alkenes, and hydrocarbon isomers. There are basically two different separation technologies that can be employed: (1) a pressure swing adsorption (PSA) unit with a fixed bed of adsorbent particles, and (2) a membrane device, wherein the mixture is allowed to permeate through a micro-porous crystalline layer. In view of the vast number of MOFs, and ZIFs that have been synthesized there is a need for a systematic screening of potential candidates for any given separation task. Also of importance is to investigate how MOFs and ZIFs stack up against the more traditional zeolites such as NaX and NaY with regard to their separation characteristics. This perspective highlights the potency of molecular simulations in determining the choice of the best MOF or ZIF for a given separation task. A variety of metrics that quantify the separation performance, such as adsorption selectivity, working capacity, diffusion selectivity, and membrane permeability, are determined from a combination of Configurational-Bias Monte Carlo (CBMC) and Molecular Dynamics (MD) simulations. The practical utility of the suggested screening methodology is demonstrated by comparison with available experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nickel(ii) and copper(i,ii)-based metal-organic frameworks incorporating an extended tris-pyrazolate linker

Solvothermal reactions between the tritopic pyrazole-based ligand 1,3,5-tris((1H-pyrazol-4-yl)phenyl)benzene (H 3 BTPP) and nickel(II) perchlorate or copper(II) nitrate afforded two new metal-organic frameworks, Ni 3 (BTPP) 2 ·solvent (Ni-BTPP) and Cu I 4 Cu II 2 (OH) 2 (BTPP) 2 ·solvent (Cu-BTPP). Powder diffraction structure determination methods were employed to determine the crystal and molecular structure of the copper(I,II) derivative: triangular [Cu3N6(μ3-OH)] nodes are connected to six nearby ones by the pyrazolate ligands, thus constructing flat two-dimensional layers that stack to form slit-like one-dimensional channels. Thermogravimetric analyses highlighted both the thermal stability and the permanent porosity of these two materials. Porosity was confirmed by N 2 adsorption at 77 K, yielding Langmuir specific surface areas of 1923(3) m 2 g -1 and 874(8) m 2 g -1 for Ni-BTPP and Cu-BTPP, respectively. Additionally, Ni-BTPP adsorbed 1.73 mmol g -1 (7.6 wt%) of CO 2 at the mild conditions of 298 K and 1 bar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the role of non-covalent interactions in conformation and assembly of triazine-based sequence-defined polymers

Grate and co-workers at Pacific Northwest National Laboratory recently developed high information content triazine-based sequence-defined polymers that are robust by not having hydrolyzable bonds and can encode structure and functionality by having various side chains. Through molecular dynamics (MD) simulations, the triazine polymers have been shown to form particular sequential stacks, have stable backbone-backbone interactions through hydrogen bonding and π–π interactions, and conserve their cis/trans conformations throughout the simulation. However, we do not know the effects of having different side chains and backbone structures on the entire conformation and whether the cis or trans conformation is more stable for the triazine polymers. For this reason, we investigate the role of non-covalent interactions for different side chains and backbone structures on the conformation and assembly of triazine polymers in MD simulations. Since there is a high energy barrier associated with the cis-trans isomerization, we use replica exchange molecular dynamics (REMD) to sample various conformations of triazine hexamers. To obtain rates and intermediate conformations, we use the recently developed concurrent adaptive sampling (CAS) algorithm for dimers of triazine trimers. Here, we found that the hydrogen bonding ability of the backbone structure is critical for the triazine polymers to self-assemble into nanorod-like structures, rather than that of the side chains, which can help researchers design more robust materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Diamond Membrane-Based X-Ray Optics: Fresnel Zone Plates, Beam Stops, and Grids

This project was proposed to develop the design and fabrication of zone plates for hard X-ray focusing up to 25 keV photon energies with 20 nm resolution (with zone doubling), based on diamond membranes. The benefits of using diamond are: improved mechanical robustness which among other advantages prevents collapse of high-aspect-ratio ring structures, a known high-aspect-ratio etch method, and excellent compatibility with other processes, excellent radiation hardness, extremely low X-ray absorption, and significantly improved thermal/dimensional stability as compared to alternative materials. The Phase I findings enable Phase II goals as well as significant progress in other diamond-membrane devices, such as diamond-supported X-ray optics (beam stops, apertures, phase shift disks for phase contrast X-ray microscopy, grids, resolution targets, coded apertures for coherence measurements, etc), X-ray windows and membrane–based detectors. Zone plates with outermost zones of 60 nm were written in 500 nm electron resist and transferred to a depth of up to 1.8 mm (exceeding the expectations) into a stack of engineered multilayer ultra-nano-crystalline diamond alternating non-conductive and conductive layers. The active material for focusing was added on top (Au and Ir). Several processes were investigated and validated to enable in Phase II the enhancement of the thickness of the structures, including polishing the over-plated zone plates and growing diamond on top of Ir-coated zone plates without the destruction of the nanostructures underneath. The zone plates were geometrically characterized.

07 ISOTOPE AND RADIATION SOURCES↗

Mineral–Water Interface Structure of Xenotime (YPO 4 ) {100}

Crystal truncation rod (CTR) measurements and density functional theory (DFT) calculations were performed to determine the atomic structure of the mineral–water interface of the {100} surface of xenotime (nominally YPO 4 ). This mineral is important, because it incorporates a variety of rare earth elements (REEs) in its crystal structure. REEs are critical materials necessary for a variety of renewable and energy efficient technologies. Current beneficiation techniques are not highly selective for REE ore minerals, and large amounts go to waste; this is a first step toward designing more efficient beneficiation. Evidence is found for minor relaxation of the surface within the topmost monolayer with little or no relaxation in subsurface layers. Justification for ordered water at the interface is found, where water binds to surface cations and donates hydrogen bonds to surface phosphates. The average bond lengths between cations and oxygens on water are 228 pm in the best fit to the CTR data, versus 243 and 251 pm for the DFT. No agreement on water positions bound to surface phosphates is obtained. Altogether, the findings suggest that ligands used in beneficiation with a single anionic headgroup, such as fatty acids, will have limited selectivity for xenotime relative to undesirable minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Abstract This letter solves a major hurdle that mars photolithography-based fabrication of micro-mesoscale structures in silicon. Conventional photolithography is usually performed on smooth, flat wafer surfaces to lay a 2D design and subsequently etch it to create single-level features. It is, however, unable to process non-flat surfaces or already etched wafers and create more than one level in the structure. In this study, we have described a novel cleanroom-based process flow that allows for easy creation of such multi-level, hierarchical 3D structures in a substrate. This is achieved by introducing an ultra-thin sacrificial silicon dioxide hardmask layer on the substrate which is first 3D patterned via multiple rounds of lithography. This 3D pattern is then scaled vertically by a factor of 200–300 and transferred to the substrate underneath via a single shot deep etching step. The proposed method is also easily characterizable—using features of different topographies and dimensions, the etch rates and selectivities were quantified; this characterization information was later used while fabricating specific target structures. Furthermore, this study comprehensively compares the novel pattern transfer technique to already existing methods of creating multi-level structures, like grayscale lithography and chip stacking. The proposed process was found to be cheaper, faster, and easier to standardize compared to other methods—this made the overall process more reliable and repeatable. We hope it will encourage more research into hybrid structures that hold the key to dramatic performance improvements in several micro-mesoscale devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scalable Graphene Oxide Hollow Fiber Membranes for Dye Desalination Enabled by Multi‐Purpose Polyamine Functionalization

2D nanosheets such as graphene oxide (GO) can be stacked to construct membranes with fine-tuned nanochannels to achieve molecular sieving ability. These membranes are often thin to achieve high water permeance, but their fabrication with consistent nanostructures on a large scale presents an enormous challenge. Herein, GO-based hollow fiber membranes (HFMs) are developed for dye desalination by synergistically combining chemical etching to form in-plane nanopores (10–30 nm) to increase water permeance and polyamine functionalization to improve underwater stability and enable facile large-scale production using existing membrane manufacturing processes. HFM modules with areas of 88 cm 2 and GO layer thicknesses of ≈500 nm are fabricated, and they exhibited a stable dye water permeance of 75 L m −2 h −1 bar −1 , rejection of >99.5% for Direct red and Congo red, and Na 2 SO 4 /dye separation factor of 300–500, superior to state-of-the-art commercial membranes. Furthermore, the versatility of this approach is also demonstrated using different short polyamines and porous substrates. This study reveals a scalable way of designing 2D materials into high-performance robust membranes for practical applications.

amine functionalization↗

Highly Enhanced Luminescence Performance of LEDs via Controllable Layer‐Structured 3D Photonic Crystals and Photonic Crystal Beads

Abstract Controllable layer‐structured 3D photonic crystals (PCs) are prepared using the combination of the Langmuir–Blodgett (LB) technique and layer‐by‐layer stacking method. They are used for research into the influence of the number of the layers on the enhancement of the efficiency of light emission from light‐emitting diodes (LEDs) and quantum dots (QDs). The luminescence properties of blue, green, and white LEDs are improved dramatically while applying such controllable layer‐structured 3D PCs as reflectors and the enhancement efficiencies are shown to increase with PC thickness. In addition, the fluorescence intensity increases 7.8‐fold and 5.4‐fold for red and green QDs, respectively, and the fluorescence intensity can be accurately controlled by using PCs with different layers. In addition, PC beads with yellow and red photonic bandgaps are used to improve the luminescence of a white LED with angle‐independent enhancement. These beads are simply doped into the phosphor without any other treatment. Interestingly, the light intensity of the PC bead based LED is remarkably enhanced. These quantized enhanced effect of light intensity on the thickness of PC layers, along with new generation of PC bead based LED, might offer a strategy for designing high brightness LEDs with energy‐saving performance.

Tian, Yu↗

A Family of Uranyl Coordination Polymers Containing O-Donor Dicarboxylates and Trispyridyltriazine Guests

Four uranyl coordination polymers [UO2(C6H8O4)(H2O)2](C18H12N6)2 (1), [UO2(C8H4O4)(H2O)2](C18H12N6)2 (2), Na[(UO2)(C12H6O4)2](C18H13N6)·H2O (3), and Na[(UO2)(C16H8O4)(C6H3NO2)](C18H12N6)·H2O (4) containing aliphatic (adipic acid) or aromatic linkers (1,4-benzene dicarboxylic acid (BDC), 1,4-napthalene dicarboxylic acid (NDC), anthracene 9,10-dicarboxylic acid (ADC)) were synthesized and characterized using single crystal X-ray diffraction, powder X-ray diffraction, and luminescence spectroscopy. The π-stacking distances or the number of π–π interactions present between trispyridyltriazine (TPTZ) guests or the host framework in 1–4 may be affected by the size of the O-donor linker (adipic acid < BDC < NDC < ADC). Luminescence studies show that substitution between adipic acid and BDC influences the emission of 1 and 2, in which the emission of 1 shows a red shift relative to that of 2. Uranyl emission was not observed in 3 and 4, and may be attributed to the position of the NDC and ADC triplet state relative to the emissive uranyl species.

36 MATERIALS SCIENCE↗

3D Columnar Phase of Stacked Short DNA Organized by Coherent Membrane Undulations

We report on the discovery of a new organized lipid-nucleic acid phase upon intercalation of blunt duplexes of short DNA (sDNA) within cationic multilayer fluid membranes. End-to-end interactions between sDNA leads to columnar stacks. At high membrane charge density, with the inter-sDNA column spacing (d sDNA ) comparable but larger than the diameter of sDNA, a 2D columnar phase (i.e., a 2D smectic) is found similar to the phase in cationic liposome-DNA complexes with long lambda-phage DNA. Remarkably, with increasing d sDNA as the membrane charge density is lowered, a transition is observed to a 3D columnar phase of stacked sDNA. This occurs even though direct DNA–DNA electrostatic interactions across layers are screened by diffusing cationic lipids near the phosphate groups of sDNA. Softening of the membrane bending rigidity (κ), which further promotes membrane undulations, significantly enhances the 3D columnar phase. These observations are consistent with a model by Schiessel and Aranda-Espinoza where local membrane undulations, due to electrostatically induced membrane wrapping around sDNA columns, phase lock from layer-to-layer, thereby precipitating coherent “crystal-like” undulations coupled to sDNA columns with long-range position and orientation order. The finding that this new phase is stable at large d sDNA and enhanced with decreasing κ is further supportive of the model where the elastic cost of membrane deformation per unit area around sDNA columns (∝ κh 2 /d sDNA 4 , h 2 = sum of square of amplitudes of the inner and outer monolayer undulations) is strongly reduced relative to the favorable electrostatic attractions of partially wrapped membrane around sDNA columns. Here, the findings have broad implications in the design of membrane-mediated assembly of functional nanoparticles in 3D.

59 BASIC BIOLOGICAL SCIENCES↗

A Full-Stack Exploration of Language-Based Parallelism in Fortran 2023

This poster explores native parallel features in Fortran 2023 through the lens of supporting applications with libraries, compilers, and parallel runtimes. The language revision informally named Fortran 2008 introduced parallelism in the form of Single Program Multiple Data (SPMD) execution with two broad feature sets: (1) loop-level parallelism via do concurrent and (2) a Partitioned Global Address Space (PGAS) comprised of distributed “coarray” data structures. Fortran’s native parallelism has demonstrated high performance [1] and reduced the burden of inserting what sometimes amounts to more directives than code. Several compilers support both feature sets, typically by translating do concurrent into serial do loops annotated by parallel directives and by translating SPMD/PGAS features into direct calls to a communication library. Our research focuses primarily on two questions: (1) can the compiler’s parallel runtime library be developed in the language being compiled (Fortran) and (2) can we define an interface to the runtime that liberates compilers from being hardwired to one runtime and vice versa. We are answering these questions by developing the Parallel Runtime Interface for Fortran (PRIF) [2] and the Co-Array Fortran Framework of Efficient Interfaces to Network Environments (Caffeine) [3]. Caffeine is initially targeting adoption by LLVM Flang, a new open-source Fortran compiler developed by a broad community in industry, academia, and government labs. We are also exploring the use of these features in Inference-Engine, a deep learning library designed to facilitate neural network training and inference for high-performance computing applications written in modern Fortran.

Rasmussen, Katherine↗

Lithiation of multilayer Ni/NiO electrodes: criticality of nickel layer thicknesses on conversion reaction kinetics

X-ray reflectivity and transmission electron microscopy (TEM) were used to characterize the morphological changes in thin film electrodes with alternating Ni and NiO layers during lithiation as a function of the Ni buffer layer thickness. Complete lithiation of the active NiO layers occurs only when the thickness of the Ni/NiO bilayers are less than 75 Å – a threshold value that is determined by the sum of the Ni quantity in the Ni/NiO bilayer of the multilayer stack. Thicker Ni/NiO bilayers present a kinetic barrier for lithium ion diffusion inside the stack resulting in partial lithiation of the multilayer electrodes in which only the top NiO layer lithiates. Lithiation of NiO layers in a multilayer stack also leads to an interface-specific reaction that is observed to increase the thicknesses of adjacent Ni layers by 3–4 Å and is associated with the formation of a low-density Li 2 O layer, corresponding to an interfacially-driven phase separation of the NiO. Rate dependent cyclic voltammetry studies reveal a linear relation between the peak current and scan rate suggesting that the lithiation kinetics are controlled by charge transfer resistance at the liquid–solid interface.

25 ENERGY STORAGE↗

High Dielectric Constant Semiconducting Poly(3-alkylthiophene)s from Side Chain Modification with Polar Sulfinyl and Sulfonyl Groups

In this paper, there is growing interest in designing and developing high dielectric constant (ε r ) organic semiconductors because they have the potential to further enhance device performance by promoting exciton dissociation, reducing bimolecular charge carrier recombination, and potentially enhancing charge carrier mobility via charge screening. In this study, a new class of semiconducting polymers with high ε r , i.e., sulfinylated and sulfonylated poly(3-alkylthiophene)s (P3ATs), were synthesized. Because of efficient rotation of highly polar methylsulfinyl and methylsulfonyl side groups (i.e., orientational polarization), high ε r values were achieved for these functionalized P3ATs based on an accurate capacitance measurement using a gold/semiconducting polymer/SiO 2 /n-doped Si configuration. For example, the ε r at megahertz and room temperature increased from 3.75 for the regioregular poly(3-hexylthiophene) (P3HT) to 7.4 for the sulfinylated and 8.1–9.3 for sulfonylated P3AT polymers. These values are among the highest ε r reported for conjugated polymers so far. Grazing-incident wide-angle X-ray diffraction results showed that these polar groups decreased the crystallinity for the polythiophene backbones and interfered with the π–π stacking in the crystalline structure. Consequently, their optical properties, including UV–vis absorption and fluorescence, changed in thin films. From this study, the sulfinylated polymer may be promising to provide a balance between high ε r and preserving favorable polythiophene π–π stacking structure for device applications.

36 MATERIALS SCIENCE↗

SECA Coal-Based Systems

This report documents the results of Cooperative Agreement DE-FC26-05NT42613 between Siemens Energy and the U.S. Department of Energy for the period October 1, 2008 through September 30, 2010. The Phase I POCD8R0 stack test was successfully completed as it operated for approximately 5,300 hrs and achieved all test objectives. The stack test article contained twenty-four 75 cm active length Delta8 scandia-stabilized zirconia cells. Maximum power was approximately 10 kWe and the SOFC generator demonstrated an availability factor of 85% at 50% power or greater. The Phase II POCD8R1 stack test operated for approximately 410 hrs before being aborted due to a sudden decrease in voltage accompanied by a rapid increase in temperature. The POCD8R1 test article contained forty-eight 100 cm active length Delta8 scandia-stabilized zirconia cells arranged in an array of six bundles, with each bundle containing eight cells. Cell development activities resulted in an approximate 100% improvement in cell power at 900°C. Cell manufacturing process improvements led to manufacturing yields of greater than 40% for the Delta8 cells. Delta8 cells with an active length of 100 cm were successfully manufactured as were cells with a seamless closed end. A pressurized cell test article was assembled, installed into the pressurized test facility and limited pressurized testing conducted. Open circuit voltage tests were performed at one and three atmospheres at 950°C were in agreement with the theoretical increase in the Nernst potential. Failed guard heaters precluded further testing. The SOFC analytical basis for the baseline system was validated with experimental data. Two system configurations that utilize a pressurized SOFC design with separated anode and cathode streams were analyzed. System efficiencies greater than 60% were predicted when integrating the separated anode and cathode stream module configuration with a high efficiency catalytic gasifier.

01 COAL, LIGNITE, AND PEAT↗