Search NASA⌕ Search

SEARCH · Search NASA

Results for “Standard Problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Advanced Simulation Tools for Muon-Based Accelerators

The project developed new software tools incorporating the most accurate theoretical calculations and experimental data available for crucial and not-yet-considered physics processes specific to muon accelerators. These new tools were applied to modeling muon ionization cooling channels for a muon collider or a neutrino factory, the facilities that have the potential to discover and explore new exciting fundamental physics but require the development of demanding technologies and innovative concepts. G4beamline, COSY Infinity, and WARP computer codes are particularly well-suited for addressing muon accelerator modeling problems. G4beamline was chosen for its flexibility and modularity, and for being one of the de facto standard codes used by the muon accelerator community. COSY was selected for speed, ability to take into account high-order nonlinear effects essential for the large beams under consideration, and availability of built-in optimization tools. WARP was chosen for its space charge calculation capabilities, speed and flexibility of implementing new lattice elements such as RF cavities. This final technical report summarizes the efforts on implementing advanced new tools in these computer codes addressing the shortcomings in modeling muon physics processes and using these tools to model muon ionization cooling channels.

43 PARTICLE ACCELERATORS↗

PMK 1000 cone-socket ventilator fittings force testing to ISO 5356-1:2015 Standard

This memo summarizes the results of verification tests on a cone-socket fitting to the ISO 5356-1:2015 standard, annexes B and F. The components were found to meet requirements holding 50N tensile force and more than 35 N-cm of torque for 10 seconds without separating at 35°C with a fresh socket. Humidity control was unavailable; consequently, humidity was significantly lower than the values in the ISO standard. Several repeat tests of the fitting with force, torque, and time excursions give us confidence that the fittings perform suitably to the ISO standard. Force overload tests suggest that the samples will disengage under tension at around 69 N, while torque overload tests under a force of 50 N will fail at 79 N-cm of torque. If repeated tests are performed on the same component, the socket can deform and lead to the connection failing the standard requirements. However, such failures only occur with repeated testing, and the gripping of such units can be modified so that they pass the standard. This observation demonstrates that socket gripping is responsible for those failures and would not be a problem in application.

42 ENGINEERING↗

Refined Telluric Absorption Correction for Low-resolution Ground-based Spectroscopy: Resolution and Radial Velocity Effects in the O{sub 2}A-band for Exoplanets and K i Emission Lines

Telluric correction of spectroscopic observations is either performed via standard stars that are observed close in time and airmass along with the science target, or recently growing in importance, by theoretical telluric absorption modeling. Both approaches work fine when the telluric lines are resolved, i.e., at a spectral resolving power larger than about 10,000, and it is sufficient to facilitate the detection of spectral features at lower resolution. However, a meaningful quantitative analysis also requires the reliable recovery of line strengths. Here, we show for the Fraunhofer A-band of molecular O{sub 2} that the standard telluric correction approach fails in this at lower spectral resolutions, as an example for the general problem. Doppler-shift-dependent errors of the restored flux may arise, which can amount to more than 50% in extreme cases, depending on the line shapes of the target spectral features. Two applications are discussed: the recovery of the O{sub 2} band in the reflected light of an Earth analog atmosphere, as facilitated potentially in the future using an orbiting starshade and a ground-based extremely large telescope; and the recovery of the intrinsic ratio of the K i lines in the post-nova V4332 Sgr tracing the optical depth of the emitting region, to exemplify the relevance using present-day instrumentation. We show how one should derive correction functions for the compensation of the error in dependence of radial velocity shift, spectral resolution, and target line-profile function by use of high-resolution atmospheric transmission modeling, which has to be solved for the individual case.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photography equipment and techniques. A survey of NASA developments

The Apollo program has been the most complex exploration ever attempted by man, requiring extensive research, development, and engineering in most of the sciences before the leap through space could begin. Photography has been used at each step of the way to document the efforts and activities, isolate mistakes, reveal new phenomena, and to record much that cannot be seen by the human eye. At the same time, the capabilities of photography were extended because of the need of meeting space requirements. The results of this work have been applied to community planning and ecology, for example, as well as to space and engineering. Special uses of standard equipment, modifications and new designs, as well as film combinations that indicate actual or potential ecological problems are described.

Derr, A. J.↗

Scramjet fuel injector design parameters and considerations: Development of a two-dimensional tangential fuel injector with constant pressure at the flame

The factors affecting a tangential fuel injector design for scramjet operation are reviewed and their effect on the efficiency of the supersonic combustion process is evaluated using both experimental data and theoretical predictions. A description of the physical problem of supersonic combustion and method of analysis is followed by a presentation and evaluation of some standard and exotic types of fuel injectors. Engineering fuel injector design criteria and hydrogen ignition schemes are presented along with a cursory review of available experimental data. A two-dimensional tangential fuel injector design is developed using analyses as a guide in evaluating the effects on the combustion process of various initial and boundary conditions including splitter plate thickness, injector wall temperature, pressure gradients, etc. The fuel injector wall geometry is shaped so as to maintain approximately constant pressure at the flame as required by a cycle analysis. A viscous characteristics program which accounts for lateral as well as axial pressure variations due to the mixing and combustion process is used in determining the wall geometry.

Agnone, A. M.↗

Radio and EUV observations of a coronal hole

Current ideas and modeling assumptions concerning the structure of the transition region and corona are summarized. Observations of a specific coronal hole are reported which were made with the EUV spectroheliometer aboard Skylab and with high-resolution radio telescopes in Australia and West Germany. Theoretical EUV line intensities and radio brightness temperatures are calculated, and an attempt is made to analyze the observations on the basis of standard one-dimensional plane-parallel hydrostatic-equilibrium models for the transition region and corona. It is found that any given standard model predicts either higher radio brightnesses or lower EUV line intensities than are observed. Several potential problem areas are examined in order to resolve this conflict. It is concluded that a model involving departures from hydrostatic equilibrium, varying conductive flux, mass outflow, as well as effects of thermal diffusion and nonequilibrium ionization should be investigated in more detail.

Dulk, G. A.↗

Cosmological considerations on the diffuse gamma-ray isotropic background

Bignami et al (1979) have recently studied the problem of the origin of the diffuse gamma-ray isotropic radiation. They have concluded that within standard cosmology with Lambda = 0 and p = 0, BL Lacertae objects and Seyfert galaxies can account for most of the diffuse radiation if they have not evolved in time. For QSOs, an evolutionary factor is allowed by the data. From the study of radio data, however, it is known that strong evolutionary effects are expected. The discrepancy cannot be explained by changing the geometry of the universe. Contrary to the case of standard cosmology, it is found that in order to fit the diffuse gamma-ray background, the evolutionary function required is almost identical to the one previously determined from the study of the log N-log S relation.

Canuto, V. M.↗

A method of order reduction for structural dynamics

This paper presents a new method of order reduction based on recent work of a similar nature applicable to system dynamics and control. This method provides a practical computational procedure for producing a condensed model which exactly preserves the slowest n1 modes (where n1 is the number of 'slow' eigenvalues) of the total n modes of the original model for almost any set of n1 degrees of freedom retained in the condensed model. The method can also be used to compute the eigensolutions corresponding to the n1 slowest modes of the original structural dynamics problem. The accuracy of the condensed model and the speed/accuracy performance of the eigensolver are compared with standard methods for a 90 DOF cantilevered plate.

Anderson, L. R.↗

Motion about the stable libration points in the linearized, restricted three-body problem

The motion of a point particle in the neighborhood of a triangular libration point (L sub 4 or L sub 5) in the linearized, restricted problem of three bodies in the plane is described. The derivation of the equations of motion is standard. From these equations, three invariants of the motion are obtained; the Jacobi integral is expressed linearly in terms of two of these. The trajectories for varied initial conditions are drawn, and a complete geometric description of the particle motion is given in elementary terms. Each trajectory has an exterior boundary curve; its equation is found. An approximation to this boundary curve was known; the two curves are compared graphically. For certain initial conditions, there is an interior region from which the trajectory is excluded; the equation of the boundary of this region is given.

Mittleman, D.↗

Distributed photovoltaic systems: Utility interface issues and their present status

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design.

Hassan, M.↗

Relaxation solution of the full Euler equations

A numerical procedure for the relaxation solution of the full steady Euler equations is described. By embedding the Euler system in a second order surrogate system, central differencing may be used in subsonic regions while retaining matrix forms well suited to iterative solution procedures and convergence acceleration techniques. Hence, this method allows the development of stable, fully conservative differencing schemes for the solution of quite general inviscid flow problems. Results are presented for both subcritical and shocked supercritical internal flows. Comparisons are made with a standard time dependent solution algorithm.

Johnson, G. M.↗

Relaxation solution of the full Euler equations

A numerical procedure for the relaxation solution of the full steady Euler equations is described. By embedding the Euler system in a second order surrogate system, central differencing may be used in subsonic regions while retaining matrix forms well suited to iterative solution procedures and convergence acceleration techniques. Hence, this method allows the development of stable, fully conservative differencing schemes for the solution of quite general inviscid flow problems. Results are presented for both subcritical and shocked supercritical internal flows. Comparisons are made with a standard time dependent solution algorithm. Previously announced in STAR as N82-24859

Johnson, G. M.↗

The empirical accuracy of uncertain inference models

Uncertainty is a pervasive feature of the domains in which expert systems are designed to function. Research design to test uncertain inference methods for accuracy and robustness, in accordance with standard engineering practice is reviewed. Several studies were conducted to assess how well various methods perform on problems constructed so that correct answers are known, and to find out what underlying features of a problem cause strong or weak performance. For each method studied, situations were identified in which performance deteriorates dramatically. Over a broad range of problems, some well known methods do only about as well as a simple linear regression model, and often much worse than a simple independence probability model. The results indicate that some commercially available expert system shells should be used with caution, because the uncertain inference models that they implement can yield rather inaccurate results.

Vaughan, David S.↗

Overcoming rule-based rigidity and connectionist limitations through massively-parallel case-based reasoning

Symbol manipulation as used in traditional Artificial Intelligence has been criticized by neural net researchers for being excessively inflexible and sequential. On the other hand, the application of neural net techniques to the types of high-level cognitive processing studied in traditional artificial intelligence presents major problems as well. A promising way out of this impasse is to build neural net models that accomplish massively parallel case-based reasoning. Case-based reasoning, which has received much attention recently, is essentially the same as analogy-based reasoning, and avoids many of the problems leveled at traditional artificial intelligence. Further problems are avoided by doing many strands of case-based reasoning in parallel, and by implementing the whole system as a neural net. In addition, such a system provides an approach to some aspects of the problems of noise, uncertainty and novelty in reasoning systems. The current neural net system (Conposit), which performs standard rule-based reasoning, is being modified into a massively parallel case-based reasoning version.

Barnden, John↗

LAI inversion from optical reflectance using a neural network trained with a multiple scattering model

The inversion of the leaf area index (LAI) canopy parameter from optical spectral reflectance measurements is obtained using a backpropagation artificial neural network trained using input-output pairs generated by a multiple scattering reflectance model. The problem of LAI estimation over sparse canopies (LAI < 1.0) with varying soil reflectance backgrounds is particularly difficult. Standard multiple regression methods applied to canopies within a single homogeneous soil type yield good results but perform unacceptably when applied across soil boundaries, resulting in absolute percentage errors of >1000 percent for low LAI. Minimization methods applied to merit functions constructed from differences between measured reflectances and predicted reflectances using multiple-scattering models are unacceptably sensitive to a good initial guess for the desired parameter. In contrast, the neural network reported generally yields absolute percentage errors of <30 percent when weighting coefficients trained on one soil type were applied to predicted canopy reflectance at a different soil background.

Smith, James A.↗

A Parallel Cut-Cell Algorithm for the Free-Boundary Grad--Shafranov Problem

A parallel cut-cell algorithm is described to solve the free-boundary problem of the Grad--Shafranov equation. The algorithm reformulates the free-boundary problem in an irregular bounded domain and its important aspects include a searching algorithm for the magnetic axis and separatrix, a surface integral along the irregular boundary to determine the boundary values, an approach to optimize the coil current based on a targeting plasma shape, Picard iterations with Aitken's acceleration for the resulting nonlinear problem, and a Cartesian grid embedded boundary method to handle the complex geometry. Here the algorithm is implemented in parallel using a standard domain-decomposition approach and a good parallel scaling is observed. Numerical results verify the accuracy and efficiency of the free-boundary Grad--Shafranov solver.

97 MATHEMATICS AND COMPUTING↗

Projected constraints on modified gravity cosmologies from 21 cm intensity mapping

We present projected constraints on modified gravity models from the observational technique known as 21 cm intensity mapping, where cosmic structure is detected without resolving individual galaxies. The resulting map is sensitive to both baryon acoustic oscillations and weak lensing, two of the most powerful cosmological probes. It is found that a 200 mx200 m cylindrical telescope, sensitive out to z=2.5, would be able to distinguish Dvali, Gabadadze, and Porrati from most dark energy models, and constrain the Hu and Sawicki f(R) model to |f{sub R0}|<9x10{sup -6} at 95% confidence. The latter constraint makes extensive use of the lensing spectrum in the nonlinear regime. These results show that 21 cm intensity mapping is not only sensitive to modifications of the standard model's expansion history, but also to structure growth. This makes intensity mapping a powerful and economical technique, achievable on much shorter time scales than optical experiments that would probe the same era.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

GenASiS Basics: Object-oriented utilitarian functionality for large-scale physics simulations

Aside from numerical algorithms and problem setup, large-scale physics simulations on distributed-memory supercomputers require more basic utilitarian functionality, such as physical units and constants; display to the screen or standard output device; message passing; I/O to disk; and runtime parameter management and usage statistics. Here we describe and make available Fortran 2003 classes furnishing extensible object-oriented implementations of this sort of rudimentary functionality, along with individual `unit test' programs and larger example problems demonstrating their use. Lastly, these classes compose the Basics division of our developing astrophysics simulation code GenASiS (General Astrophysical Simulation System), but their fundamental nature makes them useful for physics simulations in many fields.

97 MATHEMATICS AND COMPUTING↗