Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

MST radar transmitter control and monitor system

A generalized transmitter control and monitor card was developed using the Intel 8031 (8051 family) microprocessor. The design was generalized so that this card can be utilized for virtually any control application with only firmware changes. The block diagram appears in Figure 2. The card provides for local control using a 16 key keypad (up to 64 keys are supported). The local display is four digits of 7 segment LEDs. The display can indicate the status of all major system parameters and provide voltage readout for the analog signal inputs. The card can be populated with only the chips required for a given application. Fully populated, the card has two RS-232 serial ports for computer communications. It has a total of 48 TTL parallel lines that can define as either inputs or outputs in groups of four. A total of 32 analog inputs with a 0-5 volt range are supported. In addition, a real-time clock/calendar is available if required. A total of 16 k bytes of ROM and 16 k bytes of RAM is available for programming. This card can be the basis of virtually any monitor or control system with appropriate software.

Brosnahan, J. W.↗

Practical implementation of an accurate method for multilevel design sensitivity analysis

Solution techniques for handling large scale engineering optimization problems are reviewed. Potentials for practical applications as well as their limited capabilities are discussed. A new solution algorithm for design sensitivity is proposed. The algorithm is based upon the multilevel substructuring concept to be coupled with the adjoint method of sensitivity analysis. There are no approximations involved in the present algorithm except the usual approximations introduced due to the discretization of the finite element model. Results from the six- and thirty-bar planar truss problems show that the proposed multilevel scheme for sensitivity analysis is more effective (in terms of computer incore memory and the total CPU time) than a conventional (one level) scheme even on small problems. The new algorithm is expected to perform better for larger problems and its applications on the new generation of computer hardwares with 'parallel processing' capability is very promising.

Nguyen, Duc T.↗

Integration of perception and reasoning in fast neural modules

Artificial neural systems promise to integrate symbolic and sub-symbolic processing to achieve real time control of physical systems. Two potential alternatives exist. In one, neural nets can be used to front-end expert systems. The expert systems, in turn, are developed with varying degrees of parallelism, including their implementation in neural nets. In the other, rule-based reasoning and sensor data can be integrated within a single hybrid neural system. The hybrid system reacts as a unit to provide decisions (problem solutions) based on the simultaneous evaluation of data and rules. Discussed here is a model hybrid system based on the fuzzy cognitive map (FCM). The operation of the model is illustrated with the control of a hypothetical satellite that intelligently alters its attitude in space in response to an intersecting micrometeorite shower.

Fritz, David G.↗

Radiative transfer to space through a precipitating cloud at multiple microwave frequencies. III - Influence of large ice particles

The time-dependent influence of large ice particles on the brightness temperatures, T(B)s, that would be observed from space above severe thunderstorms is investigated using a vertically and angularly detailed plane-parallel microwave radiative transfer model. The impact of large ice particles on passive microwave T(B)s over an evolving model rain cloud was examined at ten separate frequencies in the EHF/SHF spectrum. It is shown that the frequency-dependent vertically distributed generalized emission/scattering weighting functions, introduced in this simulation to vertically resolve the contributions by individual cloud and precipitation layers to the T(B)s, can be used to identify the specific layers responsible for regulating the magnitude of top-of-atmoshere T(B)s.

Smith, Eric A.↗

Hypercubes for critical spacecraft command verification

Interplanetary spacecraft are controlled with sets of onboard commands called 'sequences' that control the spacecraft for hours, days, or weeks depending upon the craft and its current activity phase. The sequence-checking problem, with some examples from practical experience, and the technical challenges of implementing sequence checking on a parallel computer are presented. Hypercube applications including computational-physics problems, 'optimistic' and 'conservative' categories are discussed. Finally, future development and prototype ways of balancing the checking network across the hypercube nodes, handling time dependencies among the checks, and minimizing communication are described.

Horvath, Joan C.↗

Further two-dimensional code development for Stirling space engine components

The development of multidimensional models of Stirling engine components is described. Two-dimensional parallel plate models of an engine regenerator and a cooler were used to study heat transfer under conditions of laminar, incompressible oscillating flow. Substantial differences in the nature of the temperature variations in time over the cycle were observed for the cooler as contrasted with the regenerator. When the two-dimensional cooler model was used to calculate a heat transfer coefficient, it yields a very different result from that calculated using steady-flow correlations. Simulation results for the regenerator and the cooler are presented.

Ibrahim, Mounir↗

One GHz digitizer for space based laser altimeter

This is the final report for the research and development of the one GHz digitizer for space based laser altimeter. A feasibility model was designed, built, and tested. Only partial testing of essential functions of the digitizer was completed. Hybrid technology was incorporated which allows analog storage (memory) of the digitally sampled data. The actual sampling rate is 62.5 MHz, but executed in 16 parallel channels, to provide an effective sampling rate of one GHz. The average power consumption of the one GHz digitizer is not more than 1.5 Watts. A one GHz oscillator is incorporated for timing purposes. This signal is also made available externally for system timing. A software package was also developed for internal use (controls, commands, etc.) and for data communication with the host computer. The digitizer is equipped with an onboard microprocessor for this purpose.

Staples, Edward J.↗

Inter- and intra-plate deformation at North American plate boundaries

A geodetic network which spans the region between San Francisco and Lake Tahoe has been measured 5 times completely with triangulation in 1880, 1922, 1929, 1943, 1963. A resurvey with the Global Positioning System (GPS) in 1991 allows the formation of 1 coseismic and 4 interseismic epochs. The data from this network provide a unique opportunity to examine the temporal and spatial evolution of the strain field associated with the 1906 San Francisco earthquake in particular and with the Pacific-North American plate boundary in general. Calculations of strain rate from the network data lead to the following conclusions. (1) There is no resolvable (greater than 0.05 microradians/yr) strain in between Sutter Buttes and the Sierra Nevada. (2) Throughout the time since the 1906 earthquake, a region extending at least as far east as the westernmost Great Valley has been undergoing deformation related to Pac:Nam interaction and the associated earthquake cycle. (3) In the time and space of overlap, our results agree with those from the United States Geological Survey (USGS) trilateration data. Both data sets indicate that strain must be accumulating to the east of Vaca. (4) The San Andreas discrepancy cannot be accommodated in the Great Valley at the 1 sigma level of our results. It is possible to absorb it in that region at the 2 sigma level. (5) Strain rate is elevated in the years following the earthquake and decays slowly with time. It is possible that the rate in the Coast Ranges increases until around 1950 and then decays. With the exception of one epoch, strain rate in the Coast Ranges is consistently fault parallel, shows no sign changes, and is consistent with monotonic strain accumulation.

Beavan, John↗

NO versus N2O emissions from an NH4(+)-amended Bermuda grass pasture

An enclosure technique is used to monitor soil NO and N2O emissions during early summer regrowth of Bermuda grass (Cynodon dactylon) on sandy loam in a humid, subtropical region of southern Texas. The evolution of both gases was substantially higher from plots harvested at the beginning of the experiment and fertilized five days later with 52 kg N/ha as (NH4)2SO4 than from plots not harvested or fertilized. Emission of NO, but not N2O, was stimulated by clipping and removing the grass, probably because eliminating the shading provided by the dense grass canopy changed these plots from cooler to warmer than unharvested plots, thereby stimulating the activity of soil microorganisms responsible for NO production. Neither gas flux was significantly affected by application of N until the next rainfall dissolved and moved the surface-applied fertilizer into the soil. Immediately thereafter, emissions of NO and N2O increased dramatically to peaks of 160 and 12 g N/ha/d, respectively, and then declined at rates that closely parallel the nitrification rate of added NH4(+), indicating that the gases resulted from the activity of nitrifying microorganisms, rather than denitrifiers. Nitric oxide emissions during the nine-week measurement period averaged 7.2 times greater than N2O emissions and accounted for 3.2 percent of the added N. The data indicate that humid, subtropical grasslands, which not only have large geographical extent but also have been subject to intense anthropogenic disturbance, contribute significantly to the global atmospheric NO(x) budget.

Hutchinson, G. L.↗

A fast operator perturbation method for the solution of the special relativistic equation of radiative transfer in spherical symmetry

A fast method for the solution of the radiative transfer equation in rapidly moving spherical media, based on an approximate Lambda-operator iteration, is described. The method uses the short characteristic method and a tridiagonal approximate Lambda-operator to achieve fast convergence. The convergence properties and the CPU time requirements of the method are discussed for the test problem of a two-level atom with background continuum absorption and Thomson scattering. Details of the actual implementation for fast vector and parallel computers are given. The method is accurate and fast enough to be incorporated in radiation-hydrodynamic calculations.

Hauschildt, P. H.↗

Local time occurrence frequency of energetic ions in the earth's magnetosheath

The occurrence frequency of energetic ions in the energy range from 8 to 40 keV/e as a function of local time in the magnetosheath is presented. Energetic ions are observed in the magnetosheath with a minimum probability of 25 percent for all local times. The occurrence frequency for the energetic ions is higher on the dawnside than on the duskside but shows a relative maximum postnoon in the local time range from 12 to 15 hours. The postnoon relative maximum is attributed to a magnetospheric source for the energetic ions while the dawn-dusk asymmetry is attributed to a quasi-parallel bow shock source.

Fuselier, S. A.↗

Parallel decomposition methods for the solution of electromagnetic scattering problems

This paper contains a overview of the methods used in decomposing solutions to scattering problems onto coarse-grained parallel processors. Initially, a short summary of relevant computer architecture is presented as background to the subsequent discussion. After the introduction of a programming model for problem decomposition, specific decompositions of finite difference time domain, finite element, and integral equation solutions to Maxwell's equations are presented. The paper concludes with an outline of possible software-assisted decomposition methods and a summary.

Cwik, Tom↗

Study of the Solar Wind Interaction with Mars

The purpose of this study is to perform the following activities: (1) Implement the HALFSHEL code on the parallel machines at NASA Ames' NAS facility; (2) Perform test simulations of "bare" Mars object and compare results with data and previous simulations that only reached to the Martian terminator; (3) Place ion production chemistry into the parallel HALFSHEL code and test; (4) Simulate Mars at least 3 Rm into the tail region and compare the results to data; and (5) Examine the changes in the Martian magnetosphere by examining time dependent variation of the solar wind parameters. This paper details the progress made during the first four months of the contract in accordance with the contract requirements.

Source record↗

Auroral Microphysics Rocket (AMICIST) and Reflight of the Phaze Sounding Rocket

This grant was originally awarded for the flight of the AMICIST sounding rocket. However, upon launch failure of the PHAZE rocket, additional resources were placed in this grant to cover the launch of the PHAZE II rocket. AMICIST was successfully launched from the Poker Flat Range on February 24, 1995, and the PHAZE II was successfully launched also from the Poker Flat Range on February 10, 1997. The major objective of the AMICIST flight was to investigate the bursts of transverse ion acceleration occurring during aurora, commonly known as Lower Hybrid Solitary Structures, with the flight of two scientific payloads to unravel space from time effects. The data clearly showed that the structures of ion acceleration were a spatial phenomena having a scale size transverse to the local magnetic field of about 100 m. On the other hand, structures in the auroral electrons were generally observed on this flight to be temporal features that occurred at the same time at the two payloads separated by a few kilometers. The primary objective of the PHAZE rocket flight was to further study the temporal features of auroral electron precipitation having many electron detectors, some fixed in energy, that could study the distribution function of the auroral electrons on time scales of a fraction of a millisecond. A important paper on this topic has just been submitted for publication which uses the PHAZE data to show that the potential structure (electric field parallel to the magnetic field) that accelerates the auroral electrons within one Earth radius of the ground, is not static, but rather fluctuates with frequencies close to the local proton and hydrogen gyrofrequencies. The fluctuation appears to be an actual turning on and off of the electric field at these frequencies. When the potential is turned off, ambient electrons can enter the region and be accelerated along B when the potential is on creating field- aligned bursts which manifest themselves as flickering aurora seen from the ground. The on/off model can explain many of the dynamic features of the aurora which have been unexplained since man first looked up at the visual display. Much needs to be done yet to understand how ions couple into this process.

Arnoldy Roger L.↗

Performance Enhancement of the Space Shuttle RSRM Nozzle-to-Case Joint Using a Carbon Rope Barrier

A carbon rope "thermal barrier" is being considered as a component to enhance performance of the Reusable Solid Rocket Motor (RSRM) nozzle-to-case joint. Fundamental performance characteristics of the rope have been considered in this paper. In particular, resistance to erosion, ability to filter particulate matter, thermal capacitance, and flow resistance have been considered. Testing results have shown the rope to be resistant to the corrosive internal environment of the RSRM. The rope has also been shown to be an effective "slag barrier." A desirable feature of the rope would be the ability to act as a heat sink. However, analyses have indicated that the thermal capacitance of the rope is not large enough to reduce the temperature of an impinging gas stream below the ablation temperature of the 0-ring for significant time periods, The real value of the rope is its ability to act as a flow diffuser. Flow resistance test, were performed on the rope In the course of testing the rope between parallel plates, an undesirable "blow-by" phenomenon was observed when the compressive stress in the rope was smaller than the upstream gas pressure. It was found, however, that in the converging passage of the actual design, the rope would consistently "Self-seat" and thereby prevent blow-by, even in the absence of any precompression. Flow resistance values have been quantified for use in future analyses. The work presented here provides an initial thermal-fluid assessment of the rope for this application, and lays the groundwork for future development.

Ewing, M. E.↗

Models of Small-Scale Patchiness

Patchiness is perhaps the most salient characteristic of plankton populations in the ocean. The scale of this heterogeneity spans many orders of magnitude in its spatial extent, ranging from planetary down to microscale. It has been argued that patchiness plays a fundamental role in the functioning of marine ecosystems, insofar as the mean conditions may not reflect the environment to which organisms are adapted. Understanding the nature of this patchiness is thus one of the major challenges of oceanographic ecology. The patchiness problem is fundamentally one of physical-biological-chemical interactions. This interconnection arises from three basic sources: (1) ocean currents continually redistribute dissolved and suspended constituents by advection; (2) space-time fluctuations in the flows themselves impact biological and chemical processes, and (3) organisms are capable of directed motion through the water. This tripartite linkage poses a difficult challenge to understanding oceanic ecosystems: differentiation between the three sources of variability requires accurate assessment of property distributions in space and time, in addition to detailed knowledge of organismal repertoires and the processes by which ambient conditions control the rates of biological and chemical reactions. Various methods of observing the ocean tend to lie parallel to the axes of the space/time domain in which these physical-biological-chemical interactions take place. Given that a purely observational approach to the patchiness problem is not tractable with finite resources, the coupling of models with observations offers an alternative which provides a context for synthesis of sparse data with articulations of fundamental principles assumed to govern functionality of the system. In a sense, models can be used to fill the gaps in the space/time domain, yielding a framework for exploring the controls on spatially and temporally intermittent processes. The following discussion highlights only a few of the multitude of models which have yielded insight into the dynamics of plankton patchiness. In addition, this particular collection of examples is intended to furnish some exposure to the diversity of modeling approaches which can be brought to bear on the problem. These approaches range from abstract theoretical models intended to elucidate specific processes, to complex numerical formulations which can be used to actually simulate observed distributions in detail.

McGillicuddy, D. J.↗

An Analog Processor for Image Compression

This paper describes a novel analog Vector Array Processor (VAP) that was designed for use in real-time and ultra-low power image compression applications. This custom CMOS processor is based architectually on the Vector Quantization (VQ) algorithm in image coding, and the hardware implementation fully exploits the inherent parallelism built-in the VQ algorithm.

Vector Array Processor VAP analog processor image ↗

Simulation of a Miniature, Low-Power Time-of-Flight Mass Spectrometer for In Situ Analysis of Planetary Atmospheres

We are implementing nano- and micro-technologies to develop a miniaturized electron impact ionization mass spectrometer for planetary science. Microfabrication technology is used to fabricate the ion and electron optics, and a carbon nanotube (CNT) cathode is used to generate the ionizing electron beam. Future NASA planetary science missions demand miniaturized, low power mass spectrometers that exhibit high resolution and sensitivity to search for evidence of past and present habitability on the surface and in the atmosphere of priority targets such as Mars, Titan, Enceladus, Venus, Europa, and short-period comets. Toward this objective, we are developing a miniature, high resolution reflectron time-of-flight mass spectrometer (Mini TOF-MS) that features a low-power CNT field emission electron impact ionization source and microfabricated ion optics and reflectron mass analyzer in a parallel-plate geometry that is scalable. Charged particle electrodynamic modeling (SIMION 8.0.4) is employed to guide the iterative design of electron and ion optic components and to characterize the overall performance of the Mini TOF-MS device via simulation. Miniature (less than 1000 cubic centimeters) TOF-MS designs (ion source, mass analyzer, detector only) demonstrate simulated mass resolutions greater than 600 at sensitivity levels on the order of 10(exp -3) cps/molecule N2/cc while consuming 1.3 W of power and are comparable to current spaceflight mass spectrometers. Higher performance designs have also been simulated and indicate mass resolutions approximately 1000, though at the expense of sensitivity and instrument volume.

King, Todd T.↗