Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Harvesting Energy from Wastewater by Converting Sewage

This project aims were to develop and demonstrate a scalable, integrated process to convert sewage sludge into renewable natural gas (RNG), enabling wastewater treatment plants (WWTPs) to become net energy producers. The system proposal integrates autothermal hydrothermal liquefaction (AT-HTL), supercritical salt precipitation (SCSP), and hydrothermal gasification (HTG), collectively forming the Supercritical Sludge-to-Gas (SC-S2G) platform. Initially, batch hydrothermal liquefaction reactions were used to screen sewage sludge using AT-HTL (later termed RI-HTL) conversion to biocrude, aqueous and char phases compared to hydrothermal liquefaction (HTL). Significant improvement in biocrude yield using peroxide addition at O:C ratio of 0.05 and under conditions of 300°C for 10 minutes gave 57% biocrude yield and 85% fluid carbon yield (biocrude plus aqueous), while minimizing the loss of carbon to char solids (~7%). Hence, RI-HTL was shown to be effective for conversion of real sewage sludge. The corrosion of the alloy reactor tubes or vessels is an important factor when developing a process that includes an oxidant and a chemically complex feed like sewage sludge. We investigated the corrosion rates on metal alloys at 350°C for 240 hours. Corrosion rates of 0.21 and 0.26 mpy for 304L and 316L stainless steel were measured respectively. The corrosion information obtained in this investigation was utilized by PNNL for design, materials sourcing and construction of the pilot scale continuous flow system.

09 BIOMASS FUELS↗

Selective Reduction of Carbon Dioxide in Water Using [M(bpy2+)(CO)3(I)]2+ (M = Mn, Re) Electrocatalysts with Pendent Cations

Manganese(I) carbonyl complexes are promising electrocatalysts for CO2 reduction, yet their application in homogeneous aqueous media remains limited by poor solubility and selectivity. Here, we report water-soluble Mn(I) and Re(I) complexes fac-[M(bpy2+)(CO)3X]2+ (X = I or Cl), featuring bipyridine ligands functionalized with -Ph-CH2-(NMe3)+ cationic ammonium groups that integrate water solubility with secondary-sphere stabilization. In bicarbonate buffer at pH 6.8, the Mn catalyst is completely selective for CO production at a low overpotential (η = 0.3 V), operating by a protonation-first mechanism with observed rates of ~10 s−1. Pulse radiolysis reveals that the one-electron reduced Mn species undergoes dimerization in the absence of CO2 but uniquely reacts competitively with CO2 through an initial pre-equilibrium followed by fast formation of a dinuclear CO2-bridged species (ΔGo = −12.4 kcal mol−1). At a higher 0.6 V over-potential, a faster reduction-first pathway (~100 s−1) is available upon reduction of the metallo-carboxylic acid intermediate, Mn-CO2H2+; however, this regime is functionally limited by the formation of a resistive, noncatalytic film on the electrode surface. Comparison to the analo-gous water-soluble Re catalyst (kobs = 440 s−1, η = 0.6 V) highlights the distinct mechanistic ad-vantages of earth-abundant Mn in low-potential catalysis. These results demonstrate how cati-onic second-sphere design enables selective, homogeneous CO2 reduction in water while reveal-ing competing radical and electrode-mediated processes that govern catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Insights into Secondary Organic Aerosol Formation at the Air–Liquid Interface

Air-liquid interfacial processing of volatile organic compound oxidation has been suggested as an important source of secondary organic aerosols. However, owing to the lack of techniques for in situ air-liquid interface analysis, the detailed interfacial mechanism remains speculative. To obviate this, the analysis of air-liquid interfacial reactions and the dynamics of glyoxal oxidation as a model volatile organic compound using in situ liquid synchrotron-based vacuum ultraviolet single photon ionization mass spectrometry enabled by the system for analysis at the liquid vacuum interface microreactor is reported. This approach allows for determination of reaction intermediates and oxidation products including polymers and oligomers at the air-liquid interface by mass spectral analysis and appearance energy measurements. Furthermore, an expanded reaction mechanism of photooxidation free radical induced reactions as a source of aqueous secondary organic aerosol formation is proposed based on these new results, suggesting that single photon ionization could be applied to provide unique insights into interfacial chemistry changing the earth atmospheric composition.

aqueous secondary organic aerosol, glyoxal, photoo↗

Relationship between β-relaxation and structural stability of lysozyme: Microscopic insight on thermostabilization mechanism by trehalose from Raman spectroscopy experiments

Raman investigations were carried out in the low-frequency and amide I regions on lysozyme aqueous solutions in absence and presence of trehalose. Raman spectroscopy gives the unique opportunity to analyze the protein and solvent dynamics in the low-frequency range while monitoring the unfolding process by capturing the spectrum of the amide I band. From the analysis of the quasielastic intensity, a dynamic change is firstly observed in a highly hydrated protein, around 70 °C, and interpreted in relation with the denaturation mechanism of the protein. The use of heavy water and partly deuterated trehalose gives clear information on protein–trehalose interactions in the native state of lysozyme (at room temperature) and during the thermal denaturation process of lysozyme. At room temperature, it was found that trehalose is preferentially excluded from the protein surface, and has a main effect on the tetrahedral local order of water molecules corresponding to a stiffening of the H-bond network in the solvent. The consequence is a significant reduction of the amplitude of fast relaxational motions, inducing a less marked dynamic transition shifted toward the high temperatures. Upon heating, interaction between trehalose and lysozyme is detected during the solvent penetration within the protein, i.e., while the native globular state softens into a molten globule (MG) state. Addition of trehalose reduces the protein flexibility in the MG state, improving the structural stability of the protein, and inhibiting the protein aggregation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MECHANISTIC UNDERSTANDING OF CAUSTIC CRACKING OF CARBON STEELS

Liquid waste generated by the PUREX process for separation of nuclear materials is concentrated and stored in Type IV single-shell carbon steel tanks at the Savannah River Site (SRS). The Type IV tanks for this waste do not have cooling coils and have not undergone heat treatment to stress-relieve the tanks. After the waste is concentrated by evaporation, it becomes very alkaline and can cause stress corrosion cracking (SCC) and pitting corrosion of the tank materials. SRS has experienced leakage from non-stress-relieved waste tanks constructed of A285 carbon steel and pitting of A212 carbon steel tanks in the vapor space. An investigation of tank materials has been undertaken at SRS to develop a basic understanding of caustic SCC of A285 and A212 grade carbon steels exposed to aqueous solutions, primarily containing sodium hydroxide (NaOH), sodium nitrate (NaNO{sub 3}), and sodium nitrite (NaNO{sub 2}) at temperatures relevant to the operating conditions of both the F and H area plants. This report presents the results of this corrosion testing program. Electrochemical tests were designed using unstressed coupons in a simulated tank environment. The purpose of this testing was to determine the corrosion susceptibility of the tank materials as a function of chemical concentration, pH, and temperature. A285 and A516 (simulates A212 carbon steel) coupons were used to investigate differences in the corrosion of these carbon steels. Electrochemical testing included measurement of the corrosion potential and polarization resistance as well as cyclic potentiodynamic polarization (CPP) testing of coupons. From the CPP experiments, corrosion characteristics were determined including: corrosion potential (E{sub corr}), pitting or breakdown potential (E{sub pit}), and repassivation potential (E{sub prot}). CPP results showed no indications of localized corrosion, such as pitting, and all samples showed the formation of a stable passive layer as evidenced by the positive hysteresis during the scan. Analysis of the CPP data was performed to compare the corrosion susceptibility of the samples under different environmental conditions. Test results indicated that the most important factors affecting corrosion of the steel are the solution temperature, hydroxide concentration, and the material used in constructing the tanks. Variables that did not significantly affect the corrosion susceptibility of the steel were the nitrate or nitrite concentration and the atmosphere in the tank. The passivation current of the coupons increased exponentially with temperature. Longer-term studies of the passivation current are suggested based on results from the literature for iron in highly caustic environments. Polarization resistance studies showed a significant increase in corrosion rate at 125 C and 12 M hydroxide concentration when compared with tests at lower temperatures and lower hydroxide concentrations. Within the temperature and pH range of these tests, iron oxide, Fe{sub 3}O{sub 4}, becomes unstable and could account for the increased corrosion susceptibility. The applicability of these conditions should be confirmed and detailed surface studies should be conducted to determine the corrosion resistance of A285 and A516 carbon steels under these conditions. Surface science studies should also be conducted to determine the role of the carbon steel composition in preventing corrosion under these conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Unconventional Complex Coacervation between Neutral Polymer and Inorganic Polyoxometalate in Aqueous Solution via Direct Water Mediation

Water, specifically in a hydration shell, is critical for many biological supramolecular aggregations in nature, where water can directly mediate intermolecular association via hydrogen bonding and is regarded as “structured water”. Conversely, little has been reported on the biomimetic water-mediated supramolecular assembly with adequately high water content to date, because of the competing thermodynamic processes of water hydration and water as a building block to participate in self-assembly. In this work, we explore water-mediated complexation based on entropy-driven biphasic coacervate formation using highly hydrophilic neutral polymer and inorganic mineral-analogous nanoclusters. For the first time (to the best of our knowledge), nonelectrostatic liquid–liquid separating coacervate formation is demonstrated between polyethylene glycol (PEG) and polyoxometalate (POM) nanoclusters in aqueous solutions of varied PEG and POM concentrations, POM types, and aqueous medium conditions. Comprehensive characterization using fluorescence microscopy, small-angle X-ray scattering, calorimetry, and other techniques has confirmed that the compositions, microstructure, and thermodynamics of PEG–POM complex coacervation are highly similar to entropy-driven complex coacervation between oppositely charged polyelectrolytes in aqueous solution. However, the effect of heavy water on critical POM concentration for the onset of coacervate formation suggests that water, instead of the counter ions as commonly debated for polyelectrolyte complex coacervation, is responsible for PEG–POM coacervate formation. Specifically, structured water works as a hydrogen bond donor for both highly hydrated PEG and POM to directly mediate the PEG–water–POM association, resulting in the release of excess hydrated water for entropy-driven PEG–POM complex coacervation. Furthermore, water-mediated complex coacervation could be developed as a general and simple strategy to build biomimetic hybrid nanomaterials with high water content for various applications from energy-related functional nanomaterials to biomedical ramification.

36 MATERIALS SCIENCE↗

Silicate Carbonation in Supercritical CO2 Containing Dissolved H2O: An in situ High Pressure X-Ray Diffraction Study

Technological advances have been significant in recent years for managing environmentally harmful emissions (mostly CO2) resulting from combustion of fossil fuels. Deep underground geologic formations are emerging as reasonable options for long term storage of CO2 but mechanisms controlling rock and mineral stability in contact with injected supercritical fluids containing water are relatively unknown. In this paper, we discuss mineral transformation reactions occurring between supercritical CO2 containing water and the silicate minerals forsterite (Mg2SiO4), wollastonite (CaSiO3), and enstatite (MgSiO3). This study utilizes newly developed in situ high pressure x-ray diffraction (HXRD) and in situ infra red (IR) to examine mineral transformation reactions. Forsterite and enstatite were selected as they are important minerals present in igneous and mafic rocks and have been the subject of a large number of aqueous dissolution studies that can be compared with non-aqueous fluid tests in this study. Wollastonite, classified as a pyroxenoid (similar to a pyroxene), was chosen as a suitably fast reacting proxy for examining silicate carbonation processes associated with a wet scCO2 fluid as related to geologic carbon sequestration. The experiments were conducted under modest pressures (90 to 160 bar), temperatures between 35° to 70° C, and varying concentrations of dissolved water. Under these conditions scCO2 contains up to 3,500 ppm dissolved water.

carbon sequestration↗

Silicon control of strontium and cesium partitioning in hydroxide-weathered sediments

Sorption of cesium and strontium during weathering of uncontaminated sediments from the Hanford Site was studied under geochemical conditions chosen to model that of high level radioactive waste leachate at Hanford. Based on prior studies of a range of model clay mineral systems, we postulated that Cs and Sr uptake in the sediments would reflect concurrent and competitive adsorption and co-precipitation effects. Batch experiments were conducted from 0 to 374 d at 298 K to measure long-term kinetics of Cs and Sr uptake to and release from three representative Hanford Site sediments; Ringold silt (RS), Hanford fine sand (HF), and Hanford coarse sand (HC). Sorbent affinity for Cs decreased in the order RS >HF > HC. Similar trends were observed for Sr at early times, but all sediments showed similar Sr sorption capacities after several months reaction time. Strontium uptake by all sediments exceeded that of Cs at nearly all reaction times. After 374 d, the total amount of Cs and Sr sorbed in all systems ranged from 15-37% and 80-93% of the initial concentrations, respectively. Although time-dependent trends for Cs uptake were not clearly evident, the fraction of nonexchangeable Cs increased slightly over time despite fluctuations. Strontium became progressively recalcitrant to desorption after 92 d, suggesting that coprecipitation in neoformed phases may be a significant sequestration mechanism for Sr in sediments of the Hanford vadose zone. SEM-EDS showed formation of Cs and Sr containing secondary solid phases after 183 d. Synchrotron μ-XRF, μ-XRD identified these phases as cancrinite and sodalite. Results indicate that while both Sr and Cs are incorporated into neo-formed precipitates, Sr uptake and lability is more sensitively dependent on mineral transformation reactions in the sediments, whereas Cs uptake is strongly influenced by adsorption, probably associated with high-affiinity and edge sites of native micaceous minerals.

neoformed precipitates↗

On the importance of correcting for the uncompensated Ohmic resistance in model experiments of the oxygen reduction reaction.

When measuring the current due to the Oxygen Reduction Reaction (ORR) and hydrogen oxidation reaction (HOR) on Pt and Pt alloys in aqueous electrolyte, it is important to take care of two major sources of error that are relatively easy to correct for. First, when measuring ORR voltammetry, adsorption processes are superimposed on the current. Second, the system resistance causes an Ohmic drop that may have a profound effect on the measured curves, especially at the higher currents close to the diffusion limiting current. More importantly, we show that it also influences the kinetic part of the potential curve in such a way that the Tafel slope may be determined incorrectly when failing to correct for Ohmic drop. Finally, because electrolyte resistance lowers with increasing temperature, failure to compensate for Ohmic.

08 HYDROGEN↗

Investigation of the electrocatalytic oxygen reduction and evolution reactions in lithium–oxygen batteries

Oxygen reduction and oxygen evolution reactions were examined on graphite electrodes with different crystal orientations. The kinetics for the redox couple O 2 /O 2 •- are very fast, therefore no catalyst seems necessary to assist the charge transfer process. Apparently, the main source of the overpotential for the O 2 reduction reaction is from mass diffusion. Li 2 O 2 becomes soluble in non-aqueous electrolytes in the presence of the tetraethylammonium tetrafluoroborate additive. The soluble B-O 2 2- ions can be oxidized electro-catalytically. The edge orientation of graphite demonstrates superior catalytic activity for the oxidation over basal orientation. The findings reveal an opportunity for recharging Li-air batteries efficiently and a new strategy of developing the catalyst for oxygen evolution reaction.

25 ENERGY STORAGE↗

Insights into the Mechanism of Fe(II) Adsorption and Oxidation at Fe-Clay Mineral Surfaces from First-Principles Calculations

Interfacial reactivity of redox-active iron-bearing mineral surfaces plays a crucial role in many environmental processes including biogeochemical cycling of various elements and contaminants. Herein, we apply density-functional-theory (DFT) calculations to provide atomistic insights into the heterogeneous reaction between aqueous Fe(II) and the Fe-bearing clay mineral nontronite Fe2Si4O10(OH)2 by studying its adsorption mechanism and interfacial Fe(II)-Fe(III) electron transfer (ET) at edge and basal surfaces. We find that edge-bound Fe(II) adsorption complexes at different surface sites (ferrinol, silanol and mixed) may coexist on both (010) and (110) edge facets, with complexes at ferrinol FeO(H) sites being the most energetically favorable and coupled to proton transfer. Calculation of the ET activation energy suggests that interfacial ET into dioctahedral Fe(III) sheets is probable at the clay edges and occurs predominantly but not exclusively through the complexes adsorbed at ferrinol sites and might also involve mixed sites. No clear evidence is found for complexes on basal surface that are compatible with ET through the basal sheet despite this experimentally hypothesized ET interface. This study suggests a strong pH-dependence of Fe(II) surface complexation at basal versus edge facets and highlights the importance of the protonation state of bridging ligands and proton coupled electron transfer to facilitate ET into Fe-rich clay minerals.

Environmental Molecular Sciences Laboratory↗

Organo-sulfur molecules enable iron-based battery electrodes to meet the challenges of large-scale electrical energy storage

Rechargeable iron-air and nickel-iron batteries are attractive as sustainable and inexpensive solutions for large-scale electrical energy storage because of the global abundance and eco-friendliness of iron, and the robustness of iron-based batteries to extended cycling. Despite these advantages, the commercial use of iron-based batteries has been limited by their low charging efficiency. This limitation arises from the iron electrodes evolving hydrogen extensively during charging. The total suppression of hydrogen evolution has been a significant challenge. We have found that organo-sulfur compounds with various structural motifs (linear and cyclic thiols, dithiols, thioethers and aromatic thiols) when added in milli-molar concentration to the aqueous alkaline electrolyte, reduce the hydrogen evolution rate by 90%. These organo-sulfur compounds form strongly adsorbed layers on the iron electrode and block the electrochemical process of hydrogen evolution. The charge-transfer resistance and double-layer capacitance of the iron/electrolyte interface confirm that the extent of suppression of hydrogen evolution depends on the degree of surface coverage and the molecular structure of the organo-sulfur compound. An unanticipated electrochemical effect of the adsorption of organo-sulfur molecules is "de-passivation" that allows the iron electrode to be discharged at high current values. The strongly adsorbed organo-sulfur compounds were also found to resist electro-oxidation even at the positive electrode potentials at which oxygen evolution can occur. Through testing on practical rechargeable battery electrodes we have verified the substantial improvements to the efficiency during charging and the increased capability to discharge at high rates. We expect these performance advances to enable the design of efficient, inexpensive and eco-friendly iron-based batteries for large-scale electrical energy storage.

Yang, B↗

In operando observation system for electrochemical reaction by soft X-ray absorption spectroscopy with potential modulation method

In order to investigate local structures of electrolytes in electrochemical reactions under the same scan rate as a typical value 100 mV/s in cyclic voltammetry (CV), we have developed an in operando observation system for electrochemical reactions by soft X-ray absorption spectroscopy (XAS) with a potential modulation method. XAS spectra of electrolytes are measured by using a transmission-type liquid flow cell with built-in electrodes. The electrode potential is swept with a scan rate of 100 mV/s at a fixed photon energy, and soft X-ray absorption coefficients at different potentials are measured at the same time. By repeating the potential modulation at each fixed photon energy, it is possible to measure XAS of electrochemical reaction at the same scan rate as in CV. We have demonstrated successful measurement of the Fe L-edge XAS spectra of aqueous iron sulfate solutions and of the change in valence of Fe ions at different potentials in the Fe redox reaction. The mechanism of these Fe redox processes is discussed by correlating the XAS results with those at different scan rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CORROSION OF ALUMINUM CLAD SPENT NUCLEAR FUEL IN THE 70 TON CASK DURING TRANSFER FROM L AREA TO H-CANYON

Aluminum-clad spent nuclear fuel will be transported for processing in the 70-ton nuclear fuel element cask from L Basin to H-canyon. During transport these fuels would be expected to experience high temperature aqueous corrosion from the residual L Basin water that will be present in the cask. Cladding corrosion losses during transport were calculated for material test reactor (MTR) and high flux isotope reactors (HFIR) fuels using literature and site information on aqueous corrosion at a range of time/temperature conditions. Calculations of the cladding corrosion loss were based on Arrhenius relationships developed for aluminum alloys typical of cladding material with the primary assumption that an adherent passive film does not form to retard the initial corrosion rate. For MTR fuels a cladding thickness loss of 33 % was found after 1 year in the cask with a maximum temperature of 260 {degrees}C. HFIR fuels showed a thickness loss of only 6% after 1 year at a maximum temperature of 180 {degrees}C. These losses are not expected to impact the overall confinement function of the aluminum cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Corrosion of Aluminum Clad Spent Nuclear Fuel in the 70 Ton Cask during Transfer from L Area to H-Canyon

Aluminum-clad spent nuclear fuel will be transported for processing in the 70-ton nuclear fuel element cask from L Basin to H-canyon. During transport these fuels would be expected to experience high temperature aqueous corrosion from the residual L Basin water that will be present in the cask. Cladding corrosion losses during transport were calculated for material test reactor (MTR) and high flux isotope reactors (HFIR) fuels using literature and site information on aqueous corrosion at a range of time/temperature conditions. Calculations of the cladding corrosion loss were based on Arrhenius relationships developed for aluminum alloys typical of cladding material with the primary assumption that an adherent passive film does not form to retard the initial corrosion rate. For MTR fuels a cladding thickness loss of 33 % was found after 1 year in the cask with a maximum temperature of 263 °C. HFIR fuels showed a thickness loss of only 6% after 1 year at a maximum temperature of 180 °C. These losses are not expected to impact the overall confinement function of the aluminum cladding.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Corrosion of Aluminum Clad Spent Nuclear Fuel in the 70 Ton Cask during Transfer from L Area to H-Canyon (Rev.1)

Aluminum-clad spent nuclear fuel will be transported for processing in the 70-ton nuclear fuel element cask from L Basin to H-canyon. During transport these fuels would be expected to experience high temperature aqueous corrosion from the residual L Basin water that will be present in the cask. Cladding corrosion losses during transport were calculated for material test reactor (MTR) and high flux isotope reactors (HFIR) fuels using literature and site information on aqueous corrosion at a range of time/temperature conditions. Calculations of the cladding corrosion loss were based on Arrhenius relationships developed for aluminum alloys typical of cladding material with the primary assumption that an adherent passive film does not form to retard the initial corrosion rate. For MTR fuels a cladding thickness loss of 33% was found after 1 year in the cask with a maximum temperature of 263 °C. HFIR fuels showed a thickness loss of only 6% after 1 year at a maximum temperature of 180 °C. These losses are not expected to impact the overall confinement function of the aluminum cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synthesis and Performance Evaluations of SAPO-34 Membranes- Milestone Report for FCRD-MRWFD-2016-000263

This report describes the synthesis and evaluation of molecular sieve zeolite membranes to separate and concentrate tritiated water (HTO) from dilute HTO-bearing aqueous streams. Several silico alumino phosphate (SAPO-34) molecular sieve zeolite membranes were synthesized on tubular supports and characterized with gas and vapor permeation measurements. The pervaporation process performance was evaluated for the separation and concentration of tritiated water. Experiments were performed over a range of tritiated water concentration that correspond to the range anticipated in a nuclear fuel processing system that includes both acid and water streams recycling. The permeate was recovered under vacuum. The tritium concentration ranged from 0.5 to 1 mCi/mL which is about 0.1 mg/L or 0.1 ppm. The separation factors calculated from the measured tritium concentrations ranged from 0.83-0.98. The HTO concentration was three orders of magnitude lower than prior experiments performed with simulated feed containing HDO (>100 ppm) using deuterated water where high separation factors (>10) were obtained using SAPO membranes on alumina disk supports. Although the membrane performance characterization results for HTO were lower than expected, they can be explained on the basis of low feed volume and three orders of magnitude lower HTO concentration compared to HDO concentration in deuterated water. Several new approaches are proposed, such as tuning the diffusion coefficient of HTO, and optimization of membrane thickness that may help achieve preferential transport of tritium (HTO) resulting in a substantially more concentrated permeate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗