Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Nonreciprocal signal routing in an active quantum network

As superconductor quantum technologies are moving towards large-scale integrated circuits, a robust and flexible approach to routing photons at the quantum level becomes a critical problem. Active circuits, which contain parametrically driven elements selectively embedded in the circuit, offer a viable solution. In this work, we present a general strategy for routing nonreciprocally quantum signals between two sites of a given lattice of oscillators, implementable with existing superconducting circuit components. Our approach makes use of a dual lattice of overdamped oscillators linking the nodes of the main lattice. Solutions for spatially selective driving of the lattice elements can be found, which optimally balance coherent and dissipative hopping of microwave photons to nonreciprocally route signals between two given nodes. In certain lattices these optimal solutions are obtained at the exceptional point of the dynamical matrix of the network. We also demonstrate that signal and noise transmission characteristics can be separately optimized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Ultrafast formation of a transient two-dimensional diamondlike structure in twisted bilayer graphene

Due to the absence of matching carbon atoms at honeycomb centers with carbon atoms in adjacent graphene sheets, theorists predicted that a sliding process is needed to form AA, AB', or ABC stacking when directly converting graphite into sp 3 bonded diamond. Here, using twisted bilayer graphene, which naturally provides AA and AB' stacking configurations, we report the ultrafast formation of a transient two-dimensional diamondlike structure (which is not observed in aligned graphene) under femtosecond laser irradiation. This photoinduced phase transition is evidenced by the appearance of bond lengths of 1.94 and 3.14 Å in the time-dependent differential pair distribution function using MeV ultrafast electron diffraction. Molecular dynamics and first-principles calculation indicate that sp 3 bonds nucleate at AA and AB' stacked areas in a moiré pattern. This work sheds light on the direct graphite-to-diamond transformation mechanism, which has not been fully understood for more than 60 years.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Efficient Source of Shaped Single Photons Based on an Integrated Diamond Nanophotonic System

An efficient, scalable source of shaped single photons that can be directly integrated with optical fiber networks and quantum memories is at the heart of many protocols in quantum information science. We demonstrate a deterministic source of arbitrarily temporally shaped single-photon pulses with high efficiency [detection efficiency = 14.9 %] and purity [g (2) (0) = 0.0168] and streams of up to 11 consecutively detected single photons using a silicon-vacancy center in a highly directional fiber-integrated diamond nanophotonic cavity. Finally, combined with previously demonstrated spin-photon entangling gates, this system enables on-demand generation of streams of correlated photons such as cluster states and could be used as a resource for robust transmission and processing of quantum information.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Structural and electronic changes in L⁢i 2 ⁢Ru⁢O 3 induced by lithium intercalation

Despite extensive research on oxide battery cathodes that transcend classical cationic redox activity, the detailed interplay between structural transformations and electronic redox processes remains insufficiently understood. We report a detailed study of the sequential structural and electronic changes in Li 2 RuO 3 upon lithium intercalation, characterized by powder x-ray and neutron diffraction alongside Ru and O K-edge x-ray absorption spectroscopy (XAS), and guided by operando synchrotron x-ray diffraction. During delithiation, Li 2 RuO 3 evolves from a well-defined monoclinic state to a complex trigonal phase via multiple intermediate structures, marked by significant changes in Ru-O bond distances that closely track the transition from a classical cationic redox to an unconventional process centered at oxygen states. Armed with high-quality atomic structural descriptions, computational models of the O K-edge XAS closely reproduce the experimentally observed spectral shifts. Lastly, we relate observations of electrochemical hysteresis with concurrent changes in the pathways of structural and electronic transitions. In conclusion, our results not only clarify the mechanisms underpinning voltage hysteresis in a model for lattice oxygen redox but also underscore the importance of structural fidelity in modeling redox behavior when this type of complex reactivity is present.

Li, Haifeng [Univ. of Illinois, Chicago, IL (Unite↗
DOE OSTI2021

Atomic-Level, Energy-Conversion Heat Transfer

Abstract Heat is stored in quanta of kinetic and potential energies in matter. The temperature represents the equilibrium and excited occupation (boson) of these energy conditions. Temporal and spatial temperature variations and heat transfer are associated with the kinetics of these equilibrium excitations. During energy-conversion (between electron and phonon systems), the occupancies deviate from equilibria, while holding atomic-scale, inelastic spectral energy transfer kinetics. Heat transfer physics reaches nonequilibrium energy excitations and kinetics among the principal carriers, phonon, electron (and holes and ions), fluid particle, and photon. This allows atomic-level tailoring of energetic materials and energy-conversion processes and their efficiencies. For example, modern thermal-electric harvesters have transformed broad-spectrum, high-entropy heat into a narrow spectrum of low-entropy emissions to efficiently generate thermal electricity. Phonoelectricity, in contrast, intervenes before a low-entropy population of nonequilibrium optical phonons becomes a high-entropy heat. In particular, the suggested phonovoltaic cell generates phonoelectricity by employing the nonequilibrium, low-entropy, and elevated temperature optical-phonon produced population—for example, by relaxing electrons, excited by an electric field. A phonovoltaic material has an ultranarrow electronic bandgap, such that the hot optical-phonon population can relax by producing electron-hole pairs (and power) instead of multiple acoustic phonons (and entropy). Examples of these quanta and spectral heat transfer are reviewed, contemplating a prospect for education and research in this field.

Engineering↗
DOE OSTI2018

Nonevaporable getter coating chambers for extreme high vacuum

Techniques for NEG coating a large diameter chamber are presented along with vacuum measurements in the chamber using several pumping configurations, with base pressure as low as 1.56x10^-12 Torr (N2 equivalent) with only a NEG coating and small ion pump. We then describe modifications to the NEG coating process to coat complex geometry chambers for ultra-cold atom trap experiments. Surface analysis of NEG coated samples are used to measure composition and morphology of the thin films. Finally, pressure measurements are compared for two NEG coated polarized electron source chambers: the 130 kV polarized electron source at Jefferson Lab and the upgraded 350 kV polarized 2 electron source, both of which are approaching or within the extreme high vacuum (XHV) range, defined as P<7.5x10^-13 Torr.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Self-Organization of Detonation-Diamond Particles on a Substrate in Carbon Condensation from the Vapor–Gas Phase

Processes in which the island structure is ordered occur in composite carbon films produced by preliminary population of an amorphous substrate with a detonation-diamond system and subsequent condensation of carbon from the vapor–gas phase. These processes, observed already upon filling of the substrate with diamond-growth centers, are manifested in that there appears a structural periodicity of the islands. It was found that the condensation of carbon on the populated substrate is accompanied by the evolution of the island structure of primary growth centers. This consists in that a hexagonal packing of the islands is formed, with the size of these islands increasing by two orders of magnitude. All these structural features of how a composite diamond-carbon film is formed indicate that self-organization processes occur in the system of diamond islands when carbon atoms are condensed and interact with primary diamond crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Manufacturing of Advanced Alnico Magnets for Energy Efficient Traction Drive Motors CRADA Final Report

The primary theme of this Technology Commercialization Fund (TCF) project was refining the pre-alloyed powder processing approach (with alnico 8, modified for higher coercivity) of that came out of the previous Development of Radically Enhanced alnico Magnets (DREaM) project to permit full size net-shape alnico magnets to be produced in a reproducible manner that could allow testing in an advanced Permanent Magnet (PM) drive motor. Previously, a lack of sufficient coercivity in alnico magnets limits their energy product and their application in automotive traction drive motors, despite their high temperature stability. Use of enhanced sintered alnico magnets, instead of rare earth (RE) magnets or larger cast alnico magnets, could lower costs and decrease cooling needs of these motors. Conventional production of the best (aligned) alnico magnets (alnico 9) involves costly directional solidification (DS) and achieves good alignment, but modest energy product (10 MGOe), because of low coercivity. Other limitations of cast alnico 9 magnets are poor mechanical properties and difficulty in scaling special casting molds to mass production. In spite of these problems with alnico 9, a commercial electric motor company, UQM, developed a fully capable traction drive motor that met many 2022 DOE-VTO performance targets, except full speed operation, due to brittle mechanical behavior. While UQM demonstrated an advanced drive motor that used alnico 9, they also encouraged the development of improved alnico, especially for greater coercivity (seeking 2X) and improved mechanical properties. While commercial sintered alnico magnets are less brittle and have improved coercivity, they have an inferior energy product due to their non-aligned, fine-grained microstructure. Thus, full development and up-scaling of well-aligned alnico magnets with a further increase in coercivity and good mechanical properties by a low cost powder processing route became the theme of this TCF project. The processing route for this project involved high-pressure gas atomization, at Ames and Carpenter, of modified alnico 8 compositions, compression molding of the resulting pre-alloyed powders into bulk samples, de-binding and sintering the samples to full density, and a final magneto-thermal treatment of the resulting bulk magnets, at Ames and Arnold Magnetic Technologies, to produce aligned magnets, which were intended for motor testing at UQM and Ford.

42 ENGINEERING↗
DOE OSTI2024

Water Atomized H13 Tool Steel Powders for Binder Jet Additive Manufacturing

ORNL (Contractor) and Ametek, Inc. (Participant) collaborated to determine the feasibility of adopting water atomized H13 tool steel powder for binder jet additive manufacturing (BJAM) for tooling applications. The capability to utilize water atomized powders can substantially reduce powder expenses for BJAM, enabling process competitiveness with casting whilst enabling new applications of high-temperature, net-shaped components.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Mu2e Experiment at Fermilab

Mu2e is an experiment under construction at Fermilab that will search for the coherent neutrinoless conversion of a muon into an electron in the field of an atomic nucleus. This is a charged-lepton flavour violating process, and its observation would be clear evidence of physics beyond the standard model. Mu2e's single-event sensitivity of $3\times 10^{-17}$ is 4 orders of magnitude better than previous experiments looking at this reaction, and indirectly probes energy scales beyond those envisioned for high-energy colliders. To achieve the high sensitivity requires a very intense but low-energy muon beam, a high-precision measurement of the conversion electron's momentum, and several key mechanisms to reduce background events. This work presents an overview of the experimental design and construction status, focusing on four "Big Deal" items which are particularly innovative or interesting.

Caron, Jean-François↗
NASA NTRS1972

The diurnal heat budget of the thermosphere

Detailed numerical calculations of thermospheric heat sources and sinks are presented and their relative importance is discussed in reference to the energy balance phenomena of the neutral atmosphere. It is shown that the thermal energy available from the absorption in the Schumann-Runge continuum leading to photodissociation of O2 is by far the largest energy source in the lower thermosphere. Other sources of varying importance in different altitude ranges are: (1) energy from photoelectrons, (2) energy exchange from thermal plasma, (3) chemical reactions (ion-electron dissociative recombination) energy gain, and (4) kinetic and dissipative energy associated with the neutral wind. The energy sinks of importance are thermal conduction at the lower boundary (120 km) and radiative cooling of atomic oxygen. It is shown that the combined energy from processes 2 to 4 constitute only a small fraction of the total energy available from photoelectrons and are in phase with the latter. It is suggested that a choice of a lower boundary much below 120 km, e.g. near the mesopause level (90 km), should be more appropriate for general thermospheric studies.

Chandra, S.↗
NASA NTRS1973

The diurnal heat budget of the thermosphere.

Detailed numerical calculations of thermospheric heat sources and sinks are presented and their relative importance is discussed in reference to the energy balance phenomena of the neutral atmosphere. It is shown that the thermal energy available from the absorption in the Schumann-Runge continuum leading to photo-dissociation of O2 is by far the largest energy source in the lower thermosphere. Other sources of varying importance in different altitude ranges are: (1) energy from photoelectrons; (2) energy exchange from thermal plasma; (3) chemical reaction (ion-electron dissociative recombination) energy gain; (4) kinetic and dissipative energy associated with the neutral wind. The energy sinks of importance are (1) thermal conduction at the lower boundary (120 km); and (2) radiative cooling of atomic oxygen. It is shown that the combined energy from processes 2 to 4 constitutes only a small fraction of the total energy available from photoelectrons and is in phase with the latter. These secondary sources (processes 2 to 4), therefore, do not constitute a significant energy source and their contribution can be simply incorporated into photoelectron energy (process 1) by defining an effective photoionization heating efficiency.

Chandra, S.↗
NASA NTRS1974

Investigation of matter-antimatter interaction for possible propulsion applications

Matter-antimatter annihilation is discussed as a means of rocket propulsion. The feasibility of different means of antimatter storage is shown to depend on how annihilation rates are affected by various circumstances. The annihilation processes are described, with emphasis on important features of atom-antiatom interatomic potential energies. A model is developed that allows approximate calculation of upper and lower bounds to the interatomic potential energy for any atom-antiatom pair. Formulae for the upper and lower bounds for atom-antiatom annihilation cross-sections are obtained and applied to the annihilation rates for each means of antimatter storage under consideration. Recommendations for further studies are presented.

Morgan, D. L., Jr.↗
NASA NTRS1980

Proposed method for degassing metals for extreme low pressures

Metal outgassing currently limits the pressures attained in vacuum chambers. The dominant residual gas in a carefully degassed metal system is usually hydrogen. The atomic hydrogen within bulk metals could be removed by diffusion processes if surface effects did not interfere. It is proposed that removing the surface hydrogen during vacuum bakeout by continuous electron bombardment (or similar irradiation) would allow the diffusion to proceed and lead to lower outgassing rates and operating pressures.

Moore, B. C.↗
NASA NTRS1981

Low NO sub x heavy fuel combustor concept program

A gas turbine technology program to improve and optimize the staged rich lean low NOx combustor concept is described. Subscale combustor tests to develop the design information for optimization of the fuel preparation, rich burn, quick air quench, and lean burn steps of the combustion process were run. The program provides information for the design of high pressure full scale gas turbine combustors capable of providing environmentally clean combustion of minimally of minimally processed and synthetic fuels. It is concluded that liquid fuel atomization and mixing, rich zone stoichiometry, rich zone liner cooling, rich zone residence time, and quench zone stoichiometry are important considerations in the design and scale up of the rich lean combustor.

Russell, P.↗
NASA NTRS1985

Measurements of hadron mean free path for the particle-producing collisions in nuclear matter

It is not obvious a priority that the cross-section for a process in hadron collisions with free nucleons is the same as that for the process in hadron collisions with nucleons inside a target nucleus. The question arises: what is the cross-section for a process in a hadron collision with nucleon on inside the atomic nucleus. The answer to it must be found in experiments. The mean free path for particle-producing collisions of pions in nuclear matter is determined experimentally using pion-xenon nucleus collisions at 3.5 GeV/c momentum. Relation between the mean free path in question lambda sub in nucleons fm squared and the cross-section in units of fm squared/nucleon for collisions of the hadron with free nucleon is: lambda sub i = k/cross section sub i, where k = 3.00 plus or minus 0.26.

Strugalski, Z.↗
NASA NTRS1986

Secondary production of neutral pi-mesons and the diffuse galactic gamma radiation

Isobaric and scaling model predictions of the secondary spectra of neutral pi-mesons produced in proton-proton collisions, at energies between threshold and a few GeV, are compared on the basis of accelerator data and found to show the isobaric model to be superior. This model is accordingly used, in conjuction with a scaling model representation at high energies, in a recalculation of the pi exp (0) gamma-radiation's contribution to the diffuse galactic gamma background; the cosmic ray-induced production of photons (whose energy exceeds 100 MeV) by such radiation occurs at a rate of 1.53 x 10 to the -25 photons/(s-H atom). These results are compared with previous calculations of this process as well as with COS-B observations of the diffuse galactic gamma-radiation.

Dermer, C. D.↗