Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Interfacial Engineering of W 2 N/WC Heterostructures Derived from Solid‐State Synthesis: A Highly Efficient Trifunctional Electrocatalyst for ORR, OER, and HER

Abstract To meet the practical demand of overall water splitting and regenerative metal–air batteries, highly efficient, low‐cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are required to displace noble metal catalysts. In this work, a facile solid‐state synthesis strategy is developed to construct the interfacial engineering of W 2 N/WC heterostructures, in which abundant interfaces are formed. Under high temperature (800 °C), volatile CN x species from dicyanodiamide are trapped by WO 3 nanorods, followed by simultaneous nitridation and carbonization, to form W 2 N/WC heterostructure catalysts. The resultant W 2 N/WC heterostructure catalysts exhibit an efficient and stable electrocatalytic performance toward the ORR, OER, and HER, including a half‐wave potential of 0.81 V (ORR) and a low overpotential at 10 mA cm −2 for the OER (320 mV) and HER (148.5 mV). Furthermore, a W 2 N/WC‐based Zn–air battery shows outstanding high power density (172 mW cm −2 ). Density functional theory and X‐ray absorption fine structure analysis computations reveal that W 2 N/WC interfaces synergistically facilitate transport and separation of charge, thus accelerating the electrochemical ORR, OER, and HER. This work paves a novel avenue for constructing efficient and low‐cost electrocatalysts for electrochemical energy devices.

Diao, Jinxiang↗

Optimizing hierarchical membrane/catalyst systems for oxidative coupling of methane using additive manufacturing

The advantage of a membrane/catalyst system in oxidative coupling of methane (OCM) compared to conventional reactive systems is that by introducing oxygen to the OCM catalytic sites through a membrane, parasitic gas phase reactions of O 2 (g), responsible for lowering product selectivity, can be avoided. The design and fabrication of membrane/catalyst systems has, however, been hampered by low volumetric chemical conversion rates, high capital cost, and difficulties in codesigning membrane and catalyst properties to optimize the performance. We solve these issues by developing a dual-layer additive manufacturing process, based on phase inversion, to design, fabricate and optimize a hollow fiber membrane/catalyst system for OCM. We demonstrate the approach though a case study using BaCe 0.8 Gd 0.2 O 3-δ (BCG) as the basis of both the catalyst and separation layers. We show that by using the manufacturing approach we can codesign the membrane thickness and catalyst surface area so that the flux of oxygen transport through the membrane and methane activation rates in the catalyst layer match each other. Here, we demonstrate that this “rate matching” is critical for maximizing the performance, with the membrane/catalyst system significantly overperforming conventional reactor designs under identical conditions.

36 MATERIALS SCIENCE↗

Quinone-mediated electrochemical O2 reduction accessing high power density with an off-electrode heterogeneous catalyst

New methods for interconversion of electrical and chemical energy are crucial to address emerging challenges in renewable energy storage and conversion. Dissolved redox mediators provide an effective means to transport electrons (and protons) between an electrode and catalysts that are not in direct physical contact with an electrode. Mediators are widely implemented in biofuel cells, but such devices typically exhibit low power densities. Here, we report the development of a tetrasubstituted quinone mediator that exhibits excellent stability under strongly acidic conditions and supports electrochemical reduction of O2 at an off-electrode heterogeneous cobalt catalyst contained within a packed-bed reactor. Efficient oxidation of the hydroquinone by O2 in the reactor provides the basis for mediator regeneration, and an integrated “flow cathode” system supports high fuel-cell power densities. These results establish the combination of organic mediators with off-electrode heterogeneous catalysts as a versatile platform for development of new electrode-driven chemical redox transformations.

Preger, Yuliya↗

“Inverting” X-ray Absorption Spectra of Catalysts by Machine Learning in Search for Activity Descriptors

The rapid growth of methods emerging in the past decade for synthesis of “designer” catalysts—ranging from the size and shape-selected nanoparticles to mass-selected clusters, to precisely engineered bimetallic surfaces, to single site and pair site catalysts—has opened opportunities for tailoring the catalyst structure for the desired activity and selectivity. It has also sharpened the need for developing approaches to the operando characterization, ones that identify the catalytic active sites and follow their evolutions in reaction conditions. Commonly used methods for determination of the activity descriptors in the nanocatalysts, based on the correlation between the changes in catalyst performance and evolution of its structural and electronic properties, are hampered by the paucity of experimental techniques that can detect such properties with high accuracy and in reaction conditions. Out of many such techniques, X-ray absorption spectroscopy (XAS) stands out as an element-specific method that is very sensitive to the local geometric and electronic properties of the metal atoms and their surroundings and, therefore, is able to track catalyst structure modifications in operando conditions. Despite the vast amount of structure-specific information (such as, e.g., the charge states and radial distribution function of neighbors of selected atomic species) stored in the XAS data of catalysts, extracting it from the spectra is challenging, especially in the conditions of low metal weight loading, nanoscale dimensions, heterogeneous size and composition distributions, and harsh reaction environment. In this Perspective, we discuss the recent developments in XAS data analysis achieved by employing supervised and unsupervised machine learning (ML) methods for structural characterization of catalysts. By benefiting from the sensitivity of ML methods to subtle variations in experimental data, a previously “hidden” relationship between the X-ray absorption spectrum and descriptors of material’s structure and/or composition can be found, as illustrated on representative examples of mono-, hetero-, and nonmetallic catalysts. In the case of supervised ML, the experimental spectra can be rapidly “inverted”, and the structure of the catalyst can be tracked in real time and in reaction conditions. Finally, emerging opportunities for catalysis research that the ML methods enable, such as high-throughput data analysis, and their applications to other experimental probes of catalyst structure are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Two-Dimensional Phthalocyanine Dual Site Metal–Organic Framework Catalysts for the Oxygen Reduction Reaction

Metal-organic frameworks (MOFs) offer an interesting opportunity for catalysis, particularly for metal-nitrogen-carbon (M-N-C) motifs by providing an organized porous structural pattern and well-defined active sites for the oxygen reduction reaction (ORR), a key need for hydrogen fuel cells and related sustainable energy technologies. Here, in this work, we leverage electrochemical testing with computational models to study the electronic and structural properties in these systems and their relationship to ORR activity and stability based on dual transitional metal centers. These consists of two M1 metals with amine nodes coordinated to a single M2 metal with a phthalocyanine linker, where M1/M2 = Co, Ni, or Cu. Co-based metal centers, in particular Ni-Co, demonstrate the highest overall activity of all nine tested MOFs. Computationally, we identify the dominance of Co-sites, relative higher importance of the M2 site, and the role of layer M1 interactions on the ORR activity. Selectivity measurements indicate that M1 sites of MOFs, particularly Co, exhibits lowest (< 4%), and Ni demonstrates highest (>46%) two-electron selectivity, in good agreement with computational studies. Direct in-situ stability characterization, measuring dissolved metal ions, and calculations, using an alkaline stability metric, confirm that Co is the most stable metal in the MOF, while Cu exhibits notable instability at the M1. Overall, this study reveals how atomistic coupling of electronic and structural properties affects the ORR performance of dual site MOF catalysts and opens new avenues for tunable design and future development of these systems for practical electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the photocatalytic activity of Fe 3+ , Cr 3+ , La 3+ and Eu 3+ single-doped and co-doped TiO 2 catalysts produced by aqueous sol-gel processing

An aqueous sol-gel process, previously developed for producing undoped and Cu 2+ , Ni 2+ , Zn 2+ or Pb 2+ doped TiO 2 photocatalysts with remarkably high photocatalytic activity without requiring any calcination step, has been adapted to produce Fe 3+ , Cr 3+ , La 3+ or Eu 3+ single-doped TiO 2 photocatalysts as well as La3+-Fe3+ and Eu3+-Fe3+ co-doped TiO 2 catalysts. The physicochemical properties of the obtained catalysts have been characterized using a suite of complementary techniques, including ICP-AES, XRD, UV-Vis spectroscopy, nitrogen adsorption-desorption and Fe-57 M ssbauer. The active crystalline phase is obtained without requiring any calcination step and all the different catalysts are composed of nanocrystallites of anatase with a size of 6-7 nm and a high specific surface area varying from 181 to 298 m 2 g -1 . In this study, the effect of the NO 3 :Ti(IV) mole ratio used to induce the peptisation reaction during the synthesis has been studied and the results revealed that this ratio can influence significantly the textural properties of the resulting catalyst. A screening of the photocatalytic activity of the undoped and Fe 3+ , Cr 3+ , La 3+ or Eu 3+ single-doped and co-doped photocatalysts has been performed by evaluating the degradation of 4-nitrophenol under UV-Visible light (330 nm < < 800 nm). This study suggests that the photocatalytic activity is significantly influenced by the dopant nature and content with an optimal dopant content being observed in the case of Fe 3+ or La 3+ single-doped as well as in the case of La 3+ -Fe 3+ and Eu 3+ -Fe 3+ co-doped catalysts. In the case of Cr 3+ single-doped catalysts, a detrimental effect of the dopant on the photocatalytic degradation of 4-nitrophenol has been observed while no significant influence of the dopant has been detected in the case of Eu 3+ single-doped catalysts. In conclusion, the role of the different dopants in modulating the photocatalytic activity is discussed.

36 MATERIALS SCIENCE↗

Process modifications for improved carbon fiber composites: Alleviation of the electrical hazards problem

Attempts to alleviate carbon-fiber-composite electrical hazards during airplane crash fires through fiber gasification are described. Thermogravimetric and differential scanning calorimetric experiments found several catalysts that caused fibers to combust when composites were exposed to test fires. Composites were tested in the 'Burn-Bang' apparatus and in high voltage electrical detection grid apparatus. In a standard three minute burn test modified composites released no fibers, while state-of-the-art composites released several hundred fiber fragments. Expected service life with and without catalytic modification was studied and electron microscopy and X-ray microanalysis furnished physical appearance and chemical composition data. An acrylic acid polymer fiber coating was developed that wet the carbon fiber surface uniformly with the catalyst, providing a marked contrast with the uneven coats obtained by solution-dipping.

Ramohalli, K.↗

Dilute Pd/Au Alloy Nanoparticles Embedded in Colloid-Templated Porous SiO 2 : Stable Au-Based Oxidation Catalysts

Dilute alloy materials hold great promise for enhancing selectivity in catalytic reactions. A major challenge with such catalytic materials is developing supported alloy nanoparticles (NPs) with a catalytically optimal composition that are stable with respect to sintering. Here, we demonstrate that NP Pd/Au catalysts with minor concentrations of Pd prepared by a colloid-templating approach are active for oxygen dissociation and catalytic oxidation, as exemplified by CO oxidation. Using electron microscopic imaging, infrared spectroscopy, and X-ray photoelectron spectroscopy, we demonstrate that Pd is stabilized within the Au nanoparticle in its metallic state with minor amounts of Pd at the surface. The Pd–Au nanoparticles are embedded in the colloidally templated silica and form a thermally stable catalyst at high temperature. Surface analysis by diffuse reflectance infrared spectroscopy indicates that the Pd atomic distribution at the surface varies with the bulk concentration, forming isolated Pd atoms at 2% Pd and a mixture of Pd monomers and small Pd clusters at 9% Pd. X-ray absorption fine structure analysis indicates that Pd is well distributed in the bulk of the nanoparticle. In conclusion, in-depth understanding of this new class of catalytic materials opens the way to a wide array of possibilities for crucial enhancement of activity and selectivity in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Computational Methods for the Deconstruction and Valorization of Lignin

Lignin is among the most abundant natural heteropolymers on Earth. While lignin represents an abundant feedstock material for the production of renewable fuels and value-added chemicals, it is an underutilized value stream in current biomass conversion technologies because there exist no economic and technically feasible routes for lignin depolymerization and upgrading. My work at NREL has focused on elucidating deconstruction pathways of this recalcitrant polymer using homogeneous and heterogeneous catalysts. This entails testing putative catalyst species against a library of model compounds as well as using computational modeling of the substrates and catalysts to determine thermodynamic and kinetic parameters. From these preliminary studies, I hope to develop strategies for the selective conversion of biomass to fuels and chemicals. Synthetic techniques applicable to a model compound library, synthesis and spectroscopic characterization of catalyst species, as well as DFT studies of all of the aforementioned will be presented.

09 BIOMASS FUELS↗

High-Throughput Mapping of the Electrochemical Properties of (Ni-Fe-Co-Ce)O x Oxygen-Evolution Catalysts

Discovering improved electrocatalysts is critical for many technologically important processes and for the development of new clean-energy technologies. In this paper, high-throughput methods for measuring fundamental electrochemical properties are demonstrated through the investigation of oxygen-evolution catalysis by using 665 oxide compositions containing nickel, iron, cobalt, and cerium. The behavior of each composition is characterized in 1.0 M NaOH(aq) by using a scanning drop three-electrode cell to perform chronopotentiometry (CP) and cyclic voltammetry experiments. CP measurements at different current densities identify different composition–performance trends, owing to underlying variations in fundamental electrochemical behavior. We report systematic, coincident, composition-dependent trends in the Tafel slopes and the reversible redox potentials of the catalysts. Finally, applying high-throughput electrochemical methods provides insight into composition–property–performance relationships and motivates new directions for the study of catalyst mechanisms by using informatics and theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically dispersed metal–nitrogen–carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement

The urgent need to address the high-cost issue of proton-exchange membrane fuel cell (PEMFC) technologies, particularly for transportation applications, drives the development of simultaneously highly active and durable platinum group metal-free (PGM-free) catalysts and electrodes. The past decade has witnessed remarkable progress in exploring PGM-free cathode catalysts for the oxygen reduction reaction (ORR) to overcome sluggish kinetics and catalyst instability in acids. Among others, scientists have identified the newly emerging atomically dispersed transition metal (M: Fe, Co, or/and Mn) and nitrogen co-doped carbon (M–N–C) catalysts as the most promising alternative to PGM catalysts. Here, we provide a comprehensive review of significant breakthroughs, remaining challenges, and perspectives regarding the M–N–C catalysts in terms of catalyst activity, stability, and membrane electrode assembly (MEA) performance. A variety of novel synthetic strategies demonstrated effectiveness in improving intrinsic activity, increasing active site density, and attaining optimal porous structures of catalysts. Rationally designing and engineering the coordination environment of single metal MN x sites and their local structures are crucial for enhancing intrinsic activity. Increasing the site density relies on the innovative strategies of restricting the migration and agglomeration of single metal sites into metallic clusters. Relevant understandings provide the correlations among the nature of active sites, nanostructures, and catalytic activity of M–N–C catalysts at the atomic scale through a combination of experimentation and theory. Current knowledge of the transferring catalytic properties of M–N–C catalysts to MEA performance is limited. Rationally designing morphologic features of M–N–C catalysts play a vital role in boosting electrode performance through exposing more accessible active sites, realizing uniform ionomer distribution, and facilitating mass/proton transports. We outline future research directions concerning the comprehensive evaluation of M–N–C catalysts in MEAs. The most considerable challenge of current M–N–C catalysts is the unsatisfied stability and rapid performance degradation in MEAs. Therefore, we further discuss practical methods and strategies to mitigate catalyst and electrode degradation, which is fundamentally essential to make M–N–C catalysts viable in PEMFC technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rhenium-Doped and Stabilized MoS 2 Atomic Layers with Basal-Plane Catalytic Activity

The development of stable and efficient hydrogen evolution reaction (HER) catalysts is essential for the production of hydrogen as a clean energy resource. A combination of experiment and theory demonstrates that the normally inert basal planes of 2D layers of MoS 2 can be made highly catalytically active for the HER when alloyed with rhenium (Re). The presence of Re at the ≈50% level converts the material to a stable distorted tetragonal (DT) structure that shows enhanced HER activity as compared to most of the MoS 2 -based catalysts reported in the literature. More importantly, this new alloy catalyst shows much better stability over time and cycling than lithiated 1T-MoS 2 . Density functional theory calculations find that the role of Re is only to stabilize the DT structure, while catalysis occurs primarily in local Mo-rich DT configurations, where the HER catalytic activity is very close to that in Pt. The study provides a new strategy to improve the overall HER performance of MoS 2 -based materials via chemical doping.

36 MATERIALS SCIENCE↗

Biaxial Strains Mediated Oxygen Reduction Electrocatalysis on Fenton Reaction Resistant L1 0 ‐PtZn Fuel Cell Cathode

Abstract PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L1 0 structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H 2 O 2 (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L1 0 ‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L1 0 ‐PtZn cathode achieves outstanding activity (0.52 A mg Pt −1 at 0.9 V iR ‐free , and peak power density of 2.00 W cm −2 ) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1L1 0 ) transition of PtZn NPs would modulate the surface PtPt distances and optimize PtO binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability.

Liang, Jiashun↗

Understanding the Oxygen Reduction Reaction Activity and Oxidative Stability of Pt Supported on Nb-Doped TiO 2

Commercial fuel cell electrocatalyst degradation results from carbon electrocatalyst support oxidation at high operating potential transients. Guided by density functional theory (DFT) calculations, Nb-doped TiO 2 (NTO) was synthesized, which exhibits a unique combination of high surface area, high electrical conductivity, and high porosity. Here, this catalyst retained 78 % of its initial electrochemically active surface area compared with 57.6 % retained by Pt/C following the DOE/FCCJ protocol for accelerated stability test. Strong metal–support interactions, which were predicted by DFT calculations and confirmed experimentally by X-ray photoelectron spectroscopy and kinetics measurements, resulted in 21 % higher oxygen reduction reaction mass activity (at 0.9 V vs. reversible hydrogen electrode) on Pt/NTO compared with commercial Pt/C. The ex situ activity and durability of Pt/NTO translated to a fuel cell. The rise in electrode ohmic resistance and non-electrode concentration overpotential indicate that improving the conductivity of NTO and optimizing the catalyst ink formulation are critical next steps in the development of Pt/NTO-catalyzed proton exchange membrane fuel cells.

30 DIRECT ENERGY CONVERSION↗

Cooperative Brønsted-Lewis acid sites created by phosphotungstic acid encapsulated metal–organic frameworks for selective glucose conversion to 5-hydroxymethylfurfural

Production of 5-hydroxymethylfurfural (HMF) from biomass-derived glucose has great potential for synthesis of renewable fuels and chemicals. Selective glucose conversion to 5-hydroxymethylfurfural requires a balance between Lewis and Brønsted acids for the cascade of glucose isomerization followed by fructose dehydration. A dual Brønsted-Lewis acid, phosphotungstic acid encapsulated MIL-101(Al)–NH 2 metal–organic frameworks (MOFs) was developed to catalyze the glucose dehydration reaction. The encapsulated catalysts had a high HMF selectivity of 58% at 44% glucose conversion at 120°C in [C 4 C 1 im]Cl. Phosphotungstic acid was uniformly dispersed in the MOF pores, which provided both Brønsted and Lewis acid sites for this cascade reaction. The Brønsted acidic phosphotungstic acid-encapsulated MOF catalyst was stable and recyclable at least four times. Here, these findings explain the effect of phosphotungstic acid location for maximizing the HMF selectivity and suggest a new approach for the design of bifunctional solid acid catalysts for selective HMF production from glucose. Moreover, the tunability of the acid properties of the encapsulated MOF catalysts provides opportunities for other biomass transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenges and opportunities in plasma-activated reactions of CO 2 with light alkanes

We present upgrading CO 2 with surplus light alkanes to value-added chemicals using one-step plasma-activated processes under mild conditions, where opportunities and challenges for improving product selectivity focus on understanding reaction pathways, decoupling and benchmarking plasma and catalyst roles in reactions, tuning catalyst structural and electronic properties under plasma activation, and developing in situ characterization techniques.

03 NATURAL GAS↗

Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells

One of the most important needs for the future of low-cost fuel cells is the development of highly active platinum group metal (PGM)-free catalysts. For the oxygen reduction reaction, Fe–N–C materials have been widely studied in both acid and alkaline media. However, reported catalysts in the literature show quite different intrinsic activity and in-cell performance, despite similar synthesis routes and precursors. Here, two types of Fe–N–C are prepared from the same precursor and procedure – the main difference is how the precursor was handled prior to use. It is shown that in one case Fe overwhelmingly existed as highly active single-metal atoms in FeN4 coordination (preferred), while in the other case large Fe particles coexisting with few single metal atoms were obtained. As a result, there were drastic differences in the catalyst structure, activity, and especially in their performance in an operating anion exchange membrane fuel cell (AEMFC). Additionally, it is shown that catalyst layers created from single-atom-dominated Fe–N–C can have excellent performance and durability in an AEMFC using H 2 /O 2 reacting gases, achieving a peak power density of 1.8 W cm -2 – comparable to similar AEMFCs with a Pt/C cathode – and being able to operate stably for more than 100 h. Finally, the Fe–N–C cathode was paired with a low-loading PtRu/C anode electrode to create AEMFCs (on H 2 /O 2 ) with a total PGM loading of only 0.135 mg cm -2 (0.090 mg Pt cm -2 ) that was able to achieve a very high specific power of 8.4 W mg PGM -1 (12.6 W mg Pt< sup>-1 ).

36 MATERIALS SCIENCE↗

Probing molecular vibrations by monochromated electron microscopy

Chemical bonds fundamentally determine molecular properties and are prevalently characterized by various spectroscopic means such as infrared and Raman spectroscopies. However, the spatial resolution of these conventional approaches is insufficient to reveal nanoscale features. Recently, monochromated electron energy-loss spectroscopy (EELS) in the transmission electron microscope achieved a groundbreaking energy resolution of a few millielectronvolts and enabled direct observation of molecular vibrational spectrum with unmatched spatial resolution. Vibrational EELS is widely applicable to both organic and inorganic matter in the solid state or liquid phase. In this study, we introduce recent advancements and key concepts of this method, compare with other spectroscopic techniques, and discuss future developments for potential applications in research fields centered on catalysts, polymers, and live cells.

Vibrational Spectroscopy↗