Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Protein Molecular Dynamics Simulations with Approximate QM: What Can We Learn?

Classical force fields are essential for computer simulations of proteins and are typically parameterized to reproduce secondary and tertiary structure of isolated proteins. However, while protein-protein interactions are ubiquitous in nature, they are not considered in parameterization efforts and are far less understood than isolated proteins. A better characterization of intermolecular interactions is widely recognized as a key to revolutionizing drug and therapeutic developments with high-throughput computational screening. Urgently needed is a critical assessment of the performance of modern protein force fields against first-principles electronic structure methods and experiments. In a daring step toward this goal, we here describe a comparison of peptide folding dynamics as predicted by a molecular mechanics force field on the one hand and by an approximate electronic structure quantum mechanical (QM) method based on density-functional tight-binding (DFTB) on the other. We further compare the dynamics from straightforward DFTB simulations with a near-linear scaling version of DFTB for massively parallel computation based on the fragment molecular orbital (FMO-DFTB) method. We illustrate differences between the phenomenology of the folding dynamics from these three methods for a small model peptide, as well as charge polarization and dynamic fluctuations, point out possible correlations and implications for force field developers, and discuss the lessons learned that might become applicable to future predictive high-throughput computer screening for personalized neoantigen cancer therapy.

Irle, Stephan↗

Performance improvement of an extraction Lambertson septum magnet in the SNS accumulator ring

The SNS ring Extraction Lambertson Septum magnet contains a strong skew quadrupole term, which has been identified as the source of causing a beam profile distortion on the target. We have performed 3D computer simulations to study the magnetic field quality in the magnet. The skew quad term is computed with different methods in simulations and is compared to measurement data. The origin of the large skew quad term is thoroughly investigated. The remedy for minimizing the skew quad term by modifying the magnet is proposed. Particle tracking is performed to verify the beam profile evolution through the existing and modified septum. The magnetic interference to the septum performance from an adjacent quadrupole is also assessed.

43 PARTICLE ACCELERATORS↗

A high-performance workflow system for subsurface simulation

Subsurface modeling applications typically neglect uncertainty in the conceptual models, past or future scenarios, and attribute most or all uncertainty to errors in model parameters. In this contribution, uncertainty in technetium-99 transport in a heterogeneous, deep vadose zone is explored with respect to the conceptual model using a next generation user environment called Akuna. Akuna provides a range of tools to manage environmental modeling projects, from managing simulation data to visualizing results from high-performance computational simulators. Core toolsets accessible through the user interface include model setup, grid generation, parameter estimation, and uncertainty quantification. The BC Cribs site at Hanford in southeastern Washington State is used to demonstrate Akuna capabilities. At the BC Cribs site, conceptualization of the system is highly uncertain because only sparse information is available for the geologic conceptual model, the physical and chemical properties of the sediments, and the history of waste disposal operations. Using the Akuna toolset to perform an analysis of conservative solute transport, significant prediction uncertainty in simulated concentrations is demonstrated by conceptual model variation. This demonstrates that conceptual model uncertainty is an important consideration in sparse data environments such as BC Cribs. It is also demonstrated that Akuna and the underlying toolset provides an integrated modeling environment that streamlines model setup, parameter optimization, and uncertainty analyses for high-performance computing applications.

Akuna↗

Quantitative simulation of a magnetospheric substorm. I - Model logic and overview

Results of a comprehensive computer simulation of the behavior of the earth's inner magnetosphere during a substorm-type event are reported. It is pointed out that the computer model self-consistently computes electric fields, currents, and plasma distributions and velocities in the inner-magnetosphere/ionosphere system; parallel electric fields and ionospheric neutral winds, however, are not included. The basic equations of the model are derived, and the inputs are described. An overview of the results is also given. The first appendix contains derivations of general, useful laws of bounce-averaged gradient, curvature, and E x B drifts in a plasma with isotropic pitch angle distribution. The second appendix gives a description of the numerical method used in the simulation.

Harel, M.↗

An investigation of surface parameter estimation from surface models

In surface scattering problems, scattering models are used to estimate the surface parameters by comparing model predictions to data. The meaning of such a procedure is examined using computer simulated scattering data from statistically known surfaces. Numerically exact scattering computations based on the moment method are conducted, and standard surface scattering models are applied to these simulated data. It is shown that such an approach usually leads to effective surface parameters as opposed to real surface parameters, except for a limited frequency region. It is also shown that if a surface scattering model is valid over all frequencies, then it is possible to recover the real surface parameters regardless of whether the surface is single scale or two scale.

Fung, A. K.↗

Machine learning strategies for systems with invariance properties

Here, in many scientific fields, empirical models are employed to facilitate computational simulations of engineering systems. For example, in fluid mechanics, empirical Reynolds stress closures enable computationally-efficient Reynolds-Averaged Navier-Stokes simulations. Likewise, in solid mechanics, constitutive relations between the stress and strain in a material are required in deformation analysis. Traditional methods for developing and tuning empirical models usually combine physical intuition with simple regression techniques on limited data sets. The rise of high-performance computing has led to a growing availability of high-fidelity simulation data, which open up the possibility of using machine learning algorithms, such as random forests or neural networks, to develop more accurate and general empirical models. A key question when using data-driven algorithms to develop these models is how domain knowledge should be incorporated into the machine learning process. This paper will specifically address physical systems that possess symmetry or invariance properties. Two different methods for teaching a machine learning model an invariance property are compared. In the first , a basis of invariant inputs is constructed, and the machine learning model is trained upon this basis, thereby embedding the invariance into the model. In the second method, the algorithm is trained on multiple transformations of the raw input data until the model learns invariance to that transformation. Results are discussed for two case studies: one in turbulence modeling and one in crystal elasticity. It is shown that in both cases embedding the invariance property into the input features yields higher performance with significantly reduced computational training costs.

97 MATHEMATICS AND COMPUTING↗

Co-Design: Fabrication of Unalloyed Plutonium

The successful induction casting of plutonium is a challenge which requires technical expertise in areas including physical metallurgy, surface and corrosion chemistry, materials science, electromagnetic engineering and a host of other technologies all which must be applied in concert. Here at LANL, we are employing a combined experimental and computational approach to design molds and develop process parameters needed to produce desired temperature profiles and improved castings. Computer simulations are performed using the commercial code FLOW-3D and the LANL ASC computer code TRUCHAS to reproduce the entire casting process starting with electromagnetic or radiative heating of the mold and metal and continuing through pouring with coupled fluid flow, heat transfer and non-isothermal solidification. This approach greatly reduces the time required to develop a new casting designs and also increases our understanding of the casting process, leading to a more homogeneous, consistent product and better process control. We will discuss recent casting development results in support of unalloyed plutonium rods for mechanical testing.

CASTING↗

Measurement of electron density with the phase-resolved cut-off probe method

The phase resolved cut-off probe method, a precise measurement method for the electron density, was recently proposed [J. H. Kwon et al., Appl. Phys. Lett. 96, 081502 (2010)]. This paper presents the measurements of electron density using the method under various experimental conditions (different pressures, powers, chamber volumes, and discharge sources). The result shows that the method is not only in good agreement with the previous method using wave transmittance under various experimental conditions but it is also able to find the cut-off point clearly even under difficult conditions such as high pressure ({approx} 1 Torr), high discharge power, and small plasma volume. The details of the experimental setup, the operating mechanism of the probe method, and the data processing procedure (algorithm) are also addressed. Furthermore, the reliability of the measurement method is investigated by using an electromagnetic field simulation with cold plasma model (CST-Drude model, Computer Simulation Technology).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of electron correlation on the electronic structure and spin-lattice coupling of high- T c cuprates: Quantum Monte Carlo calculations

Electron correlation effects are particularly strong in high-temperature superconducting materials. Devising an accurate description of these materials has long been a challenge, with these strong correlation effects historically being considered impossible or impractical to simulate computationally. Using quantum Monte Carlo techniques, we have explicitly simulated electron correlations in several cuprate materials from first principles. These simulations accurately reproduce many important physical quantities of these materials, including the interaction-induced gap and superexchange coupling between copper spins, with no additional parameters beyond fundamental constants. We further investigate the dimensionless spin-lattice coupling parameter in the parent materials, showing that it varies dramatically, between 0.1 and 1.0, depending on the interlayer. Furthermore, this result indicates that the lattice and magnetic degrees of freedom are not independent in these systems, which may have ramifications for the origin of superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metallographic Cooling Rate of IVA Irons Revisited

There is long standing problem reconciling the chemical evidence that the IVA iron meteorites formed in a core with the diverse cooling rates reported by several researchers. This large inferred range of cooling rates suggests that the IVA irons were distributed at different depths in a parent body with a complex structure when the Widmanstatten pattern formed. On the other hand, some researchers argued that the diverse cooling rates in group IVA result from inaccurate model parameters such as phase diagram, interdiffusion coefficients, and kamacite nucleation and growth mechanisms. In addition, the measured cooling rates may not apply for the same cooling temperature ranges, and the variation in the crystallographic orientations of the Widmanstatten plates on the analysis surface may result in inaccurate measurements of widths needed for the computer simulation models. We have revaluated the major parameters in computer model developed by Hopfe and Goldstein and measured cooling rates for the IVA irons. Such data are useful in evaluating whether these meteorites were part of a single core of a parent body during the formation of the Widmanstatten pattern.

Yang, J.↗

Developing a Model Component

The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

Fields, Christina M.↗

Developing a Model Component

The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is,. responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) is a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The purpose of the UCTS is to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems s:luring their development. As an intern at KSC, my assignment was to develop a model component for the UCTS. I was given a fluid component (drier) to model in Matlab. The drier was a Catch All replaceable core type filter-drier. The filter-drier provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-drier also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. I completed training for UNIX and Simulink to help aid in my assignment. The filter-drier was modeled by determining affects it has on the pressure, velocity and temperature of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my model filter-drier in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements.

Fields, Christina M.↗

Data-intensive management and analysis for scientifc simulations.

Scientific simulations can produce enormous amounts of data, making the analysis of results and management of files a difficult task for scientists. The simulation management and analysis system (Smaash) described here is designed to allow scientists to easily capture, store, organize, monitor, and analyze simulation results. The system is automatic, standardized, and secure. Smaash was built using open-source tools and modularized to be independent of the scientific simulation. The web-based front-end allows the scientist to easily interact with the data, and has proved its usefulness in improving the efficiency of a scientific team's workflow. High performance parallel computing allows scientists to solve complex physical problems through computer simulation. However, the massive amounts of data generated and the complex computing environment can create additional complications. A recent review by Ludaescher et al.(2009) describes how scientific workflows can assist scientists in extracting knowledge from these data-intensive operations by automating components within pipelines. Within the fusion community, Klasky et al.(2008) and colleagues have developed a system that handles the storage management, data movement, metadata generation and management, and a means to analyze the results. In response to scientists needs, a simulation management and analysis system (Smaash) was developed at the University of Chicago and Argonne National Laboratory (USA). Smaash provides an integrated way to monitor simulations and analyze computational results; catalog, store, and retrieve simulations; and prepare output for publications. The system is independent of the particular simulation code, accessible from many HPC and browser-based platforms, and built around open-source software tools. Data security and provenance is considered throughout. The analysis components are hidden behind a web-based front end, enabling scientists to focus on their results and not get bogged down by information overload.

99 GENERAL AND MISCELLANEOUS↗

Simulation Models for Improved Water Heating Systems

This research improved the design of computer simulation models of water heaters and hot water distribution systems to increase their accuracy and flexibility, and to allow for future inclusion of new technologies. The models will be incorporated into the Buildings Library at Lawrence Berkeley National Laboratory to assist those performing whole-building energy simulations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Simulation of a G-tolerance curve using the pulsatile cardiovascular model

A computer simulation study, performed to assess the ability of the cardiovascular model to reproduce the G tolerance curve (G level versus tolerance time) is reported. A composite strength duration curve derived from experimental data obtained in human centrifugation studies was used for comparison. The effects of abolishing automomic control and of blood volume loss on G tolerance were also simulated. The results provide additional validation of the model. The need for the presence of autonomic reflexes even at low levels of G is pointed out. The low margin of safety with a loss of blood volume indicated by the simulation results underscores the necessity for protective measures during Shuttle reentry.

Solomon, M.↗

Wall interference and boundary simulation in a transonic wind tunnel with a discretely slotted test section

A computational simulation of a transonic wind tunnel test section with longitudinally slotted walls is developed and described herein. The nonlinear slot model includes dynamic pressure effects and a plenum pressure constraint, and each slot is treated individually. The solution is performed using a finite-difference method that solves an extended transonic small disturbance equation. The walls serve as the outer boundary conditions in the relaxation technique, and an interaction procedure is used at the slotted walls. Measured boundary pressures are not required to establish the wall conditions but are currently used to assess the accuracy of the simulation. This method can also calculate a free-air solution as well as solutions that employ the classical homogeneous wall conditions. The simulation is used to examine two commercial transport aircraft models at a supercritical Mach number for zero-lift and cruise conditions. Good agreement between measured and calculated wall pressures is obtained for the model geometries and flow conditions examined herein. Some localized disagreement is noted, which is attributed to improper simulation of viscous effects in the slots.

Al-Saadi, Jassim A.↗

Probabilistic Simulation of the Human Factor in Structural Reliability

The formal approach described herein computationally simulates the probable ranges of uncertainties for the human factor in probabilistic assessments of structural reliability. Human factors such as marital status, professional status, home life, job satisfaction, work load, and health are studied by using a multifactor interaction equation (MFIE) model to demonstrate the approach. Parametric studies in conjunction with judgment are used to select reasonable values for the participating factors (primitive variables). Subsequently performed probabilistic sensitivity studies assess the suitability of the MFIE as well as the validity of the whole approach. Results show that uncertainties range from 5 to 30 percent for the most optimistic case, assuming 100 percent for no error (perfect performance).

Chamis, Christos C.↗