Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Conductivity of SU(2) gluodynamics vacuum induced by magnetic field

We study the electric conductivity of the vacuum of quenched SU(2) lattice gauge theory in the magnetic field, B, both in the confinement and in the deconfinement phases. In the confinement phase the external magnetic field induces nonzero electric conductivity along the direction of the field, transforming the system from an insulator into an anisotropic conductor. In the deconfinement phase the conductivity does not exhibit any sizable dependence on the magnetic field. We also find that the conductivity grows as the quark mass decreases, the behavior has a form B/{radical}(m).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanojunctions in conducting polypyrrole single nanowire made by focused electron beam: Charge transport characteristics

A focused electron (E)-beam with various doses was irradiated on the intended positions of conducting polypyrrole (PPy) single nanowire (NW) to fabricate nanojunctions. The current-voltage characteristics and their temperature dependence of the PPy single NW with nanojunctions were measured and analyzed. By increasing the E-beam dose and the number of nanojunctions, the current level of the single NW was dramatically decreased, and the conductance gap became more severe as the temperature decreased. The charge transport behavior varied from three-dimensional variable range hopping to fluctuation induced tunneling models, depending on the dose of focused E-beam. From micro-Raman spectra, the focused E-beam irradiation induced the de-doped states and conformational modification of polymer chains in the nanojunctions. The results suggest that the nanojunctions made by focused E-beam acted as a quasi-potential barrier for charge conduction in the conducting PPy single NW.

36 MATERIALS SCIENCE↗

Conductivity of nanosecond discharges in nitrogen and sulfur hexafluoride studied by particle-in-cell simulations

The conductivity of the discharge gap during the nanosecond high-voltage pulsed discharge in nitrogen and sulfur hexafluoride is studied using particle-in-cell numerical simulations. It is shown that the conductivity in different locations of the cathode-anode gap is not uniform and that the conductivity is determined by both the runaway and the plasma electrons. In addition, it is shown that runaway electrons generated prior to the virtual cathode formation pre-ionize the discharge gap, which makes it conductive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of self-assembled nano-structured ZnO bulk ceramics

In this study, we describe the changes in thermal conductivity behavior of ZnO-Al micro- and nano-two-phase self-assembled composites with varying grain sizes. The reduction in thermal conductivity values of micro-composites was limited to {approx}15% for ZnO-4% Al. However, nano-composites exhibited large reduction, by a factor of about three, due to uniform distribution of nano-precipitates (ZnAl2O4) and large grain boundary area. Interestingly, the micro-composites revealed continuous decrease in thermal conductivity with increase in Al substitution while the nano-composites exhibited the lowest magnitudes for 2% Al concentration. Raman spectra indicated that phonon confinement in ZnO-Al nano-composites causes drastic decrease in the value of thermal conductivity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Visible photoluminescence in polycrystalline terbium doped aluminum nitride (Tb:AlN) ceramics with high thermal conductivity

Thermal management continues to be one of the major challenges in the development of high powered light sources such as solid state lasers. In particular, the relatively low thermal conductivity of standard photoluminescent (PL) materials limits the overall power output and/or duty cycle. We present a method based on current activated pressure assisted densification for the fabrication of high thermal conductivity PL materials: rare earth doped polycrystalline bulk aluminum nitride. Specifically, the ceramics are translucent and are doped with Tb{sup 3+}, allowing for emission in the visible. Remarkably, the ceramics have a room temperature thermal conductivity of 94 W/(m K) which is almost seven times higher than that of the state of the art host material, Nd-doped yttrium aluminum garnet. These light emitting properties coupled with very high thermal conductivity should enable the development of a wide variety of more powerful light sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of the identification of multiwall carbon nanotubes carpet thermal conductivity by pulsed photothermal method

Thermal properties in multiwall carbon nanotubes carpets and micro-devices are investigated using a nanosecond photothermal method. Gradually, the identification model and experimental protocol are performed to increase the method accuracy for the thermal conductivity determination. In the experimental protocol, a nanosecond UV monopulse laser beam is used to heat the surface of a multilayer (600 nm of Ti/20 {mu}m of carbon nanotube carpet) sample. In the 1D identification model with two layers and a thermal contact resistance, the effect of the laser excitation temporal shape is taken into account. In this study, this first approach allows to improve the accuracy of apparent thermal conductivity measurements of multiwall carbon nanotubes carpet. The carbon nanotubes carpet apparent thermal conductivity value went from being to 180 {+-} 5 W Multiplication-Sign m{sup -1} Multiplication-Sign K{sup -1}. In the second approach, two laser beams are coupled in order to increase the interaction time duration from 27 ns to 60 ns. It becomes possible to probe different depths in the carpet. The obtained value (180 W Multiplication-Sign m{sup -1} Multiplication-Sign K{sup -1}) confirms the pulsed photothermal method consistency for porous samples. Finally, assuming that the carbon nanotubes are parallel and without any defects, the equivalent intrinsic thermal conductivity of a single carbon nanotube is estimated to be around 3600 W Multiplication-Sign m{sup -1} Multiplication-Sign K{sup -1}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anomalous dielectric and AC conductivity behavior of the nanocrystalline Ni-Cu ferrite synthesized via combustion method

Nanocrystalline Ni-Cu ferrites (Ni{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4}) were prepared using solution combustion method. The structure of the samples were studied with the X-ray diffraction (XRD) using Cu-K{sub {alpha}} radiation. Frequency and temperature dependence of dielectric and a.c. conductivity studies have been undertaken on the Ni-Cu nanoferrites in the frequency region 100Hz-5MHz. The dielectric constant ({epsilon} Prime ) is found to decrease initially with the frequency and finally reaching a constant value at higher frequencies. Observed trends in the dielectric constant are ascribed to the Maxwell-Wagner type interfacial polarization, which is in agreement with the Koop'fs phenomenological theory. The a.c. conductivity ({sigma}{sub ac}) is found to increase with an increase in the frequency from room temperature up to 300 Degree-Sign C. However, at a temperature of 400 Degree-Sign C, the a.c. conductivity is found to decrease with an increase in the frequency exhibiting an abnormal behavior. The electrical conduction mechanism in the present nano nickel-copper ferrite is found to be in accordance with the electron hopping model.

36 MATERIALS SCIENCE↗

Amorphization and reduction of thermal conductivity in porous silicon by irradiation with swift heavy ions

In this article, we demonstrate that the thermal conductivity of nanostructured porous silicon is reduced by amorphization and also that this amorphous phase in porous silicon can be created by swift (high-energy) heavy ion irradiation. Porous silicon samples with 41%-75% porosity are irradiated with 110 MeV uranium ions at six different fluences. Structural characterisation by micro-Raman spectroscopy and SEM imaging show that swift heavy ion irradiation causes the creation of an amorphous phase in porous Si but without suppressing its porous structure. We demonstrate that the amorphization of porous silicon is caused by electronic-regime interactions, which is the first time such an effect is obtained in crystalline silicon with single-ion species. Furthermore, the impact on the thermal conductivity of porous silicon is studied by micro-Raman spectroscopy and scanning thermal microscopy. The creation of an amorphous phase in porous silicon leads to a reduction of its thermal conductivity, up to a factor of 3 compared to the non-irradiated sample. Therefore, this technique could be used to enhance the thermal insulation properties of porous Si. Finally, we show that this treatment can be combined with pre-oxidation at 300 Degree-Sign C, which is known to lower the thermal conductivity of porous Si, in order to obtain an even greater reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and electronic properties of delafossite CuBO{sub 2}p-type transparent conducting oxide

CuBO{sub 2} delafossite was prepared by solid state reaction and calcined/sintered at 1005 °C. The optical properties of this p-type transparent conducting oxide were investigated. Its crystal structure, morphology, composition, oxygen decomposition, and optical and electronic properties were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, thermal gravimetric analysis (TGA), ultraviolet-visible-near-infrared (UV-VIS-NIR) and fluorescence spectroscopies, Seebeck coefficient, and electrical conductivity measurements. CuBO{sub 2} delafossite possesses a hexagonal space group R3{sup ¯}m. TGA indicated a weight loss of 10%, which was attributed to excess oxygen. The positive Seebeck coefficient confirmed p-type behavior. Emission at 355 nm indicated a direct band type transition, and the UV-VIS-NIR spectrum indicated an optical direct gap of 3.6 eV. Activation energies for carrier production and electrical conduction were 0.147 and 0.58 eV, respectively, indicating the thermal activation of carriers. CuBO{sub 2} delafossite is a p-type transparent conducting oxide with a wide band gap and may have potential in industrial p-type electrodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} single crystals

The electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} (LTGA) single crystals was studied by nonstoichiometric defect formation during crystal growth. Since stoichiometric LTGA is not congruent, the single crystal grown from the stoichiometric melt was Ta-poor and Al-rich, where Al atoms were substituted not only in Ga sites but also in Ta sites. The population of the substitutional Al in Ta sites increased with increasing oxygen partial pressure during growth (growth-pO{sub 2}) in the range from 0.01 to 1 atm. Below 600 °C, substitutional Al atoms in Ta sites were ionized to yield holes, and thus the electrical conductivity of the LTGA crystal depended on temperature and the growth-pO{sub 2}. The dependence of the electrical conductivity on the growth-pO{sub 2} decreased as temperature increased. The temperature rise increases ionic conductivity, for which the dominant carriers are oxygen defects formed by the anion Frenkel reaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductivity behavior of very thin gold films ruptured by mass transport in photosensitive polymer film

We report on conductivity behavior of very thin gold layer deposited on a photosensitive polymer film. Under irradiation with light interference pattern, the azobenzene containing photosensitive polymer film undergoes deformation at which topography follows a distribution of intensity, resulting in the formation of a surface relief grating. This process is accompanied by a change in the shape of the polymer surface from flat to sinusoidal together with a corresponding increase in surface area. The gold layer placed above deforms along with the polymer and ruptures at a strain of 4%. The rupturing is spatially well defined, occurring at the topographic maxima and minima resulting in periodic cracks across the whole irradiated area. We have shown that this periodic micro-rupturing of a thin metal film has no significant impact on the electrical conductivity of the films. We suggest a model to explain this phenomenon and support this by additional experiments where the conductivity is measured in a process when a single nanoscopic scratch is formed with an AFM tip. Our results indicate that in flexible electronic materials consisting of a polymer support and an integrated metal circuit, nano- and micro cracks do not alter significantly the behavior of the conductivity unless the metal is disrupted completely.

36 MATERIALS SCIENCE↗

Software optimization for electrical conductivity imaging in polycrystalline diamond cutters

We previously reported on an electrical conductivity imaging instrument developed for measurements on polycrystalline diamond cutters. These cylindrical cutters for oil and gas drilling feature a thick polycrystalline diamond layer on a tungsten carbide substrate. The instrument uses electrical impedance tomography to profile the conductivity in the diamond table. Conductivity images must be acquired quickly, on the order of 5 sec per cutter, to be useful in the manufacturing process. This paper reports on successful efforts to optimize the conductivity reconstruction routine, porting major portions of it to NVIDIA GPUs, including a custom CUDA kernel for Jacobian computation.

36 MATERIALS SCIENCE↗

Thermal conductivity control by oxygen defect concentration modification in reducible oxides: The case of Pr{sub 0.1}Ce{sub 0.9}O{sub 2−δ} thin films

We demonstrate the impact on thermal conductivity of varying the concentration of oxygen vacancies and reduced cations in Pr{sub 0.1}Ce{sub 0.9}O{sub 2−δ} thin films prepared by pulsed laser deposition. The oxygen vacancy concentration is controlled by varying the oxygen partial pressure between 1 × 10{sup −4} and 1 atm at 650 °C. Corresponding changes in the oxygen non-stoichiometry (δ) are monitored by detecting the lattice parameters of the films with high-resolution X-ray diffraction, while the thermal properties are characterized by time-domain thermoreflectance measurements. The films are shown to exhibit a variation in oxygen vacancy content, and in the Pr{sup 3+}/Pr{sup 4+} ratio, corresponding to changes in δ from 0.0027 to 0.0364, leading to a reduction in the thermal conductivity from k = 6.62 ± 0.61 to 3.82 ± 0.51 W/m-K, respectively. These values agree well with those predicted by the Callaway and von Baeyer model for thermal conductivity in the presence of point imperfections. These results demonstrate the capability of controlling thermal conductivity via control of anion and cation defect concentrations in a given reducible oxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of the lattice thermal conductivity in granular crystals

This paper provides a general model for the lattice thermal conductivity in granular crystals. The key development presented in this model is that the contribution of surface phonons to the thermal conductivity and the interplay between phonon anharmonic scattering and phonon scattering by boundaries are considered explicitly. Exact Boltzmann equation including spatial dependence of phonon distribution function is solved to yield expressions for the rates at which phonons scatter by the grain boundaries in the presence of intrinsic phonon scattering mechanisms. The intrinsic phonon scattering rates are calculated from Fermi's golden rule, and the vibration parameters of the model are derived as functions of temperature and crystallographic directions by using a lattice dynamics approach. The accuracy of the model is demonstrated with reference to experimental measurements regarding the effects of surface orientation and isotope composition on the thermal conductivity in single crystals, and the effect of grains size and shape on the thermal conductivity tensor in granular crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic conductivity of Bi{sub 2}Ni{sub x}V{sub 1−x}O{sub 5.5−3x/2} (0.1 ≤ x ≤ 0.2) oxides prepared by a low temperature sol-gel route

Solid oxides fuel cells (SOFCs) is one technology that could contribute toward future sustainable energy. One of the most important components of an SOFC is the electrolyte, which must have high ionic conductivity. Cation substitution of vanadium in Bi{sub 4}V{sub 2}O{sub 11} yields a family of fast oxide ion conducting solids known collectively as the BIMEVOXes (bismuth metal vanadium oxide), which have the potential to be applied as electrolytes in SOFCs. The purpose of this work is to study the effect of Ni concentration, when used as a dopant, on the ionic conductivity of Bi{sub 2}Ni{sub x}V{sub 1−x}O{sub 5.5−3x/2} (BINIVOX) oxides (0.1 ≤ x ≤ 0.2) when prepared by a sol gel method. The gels were calcined at 600 °C for 24 h to produce pure BINIVOX. These oxides were found to exhibit the γ-phase structure with tetragonal symmetry in space group I4/mmm. Ionic conductivity of BINIVOX at 300 °C were 6.9 × 10{sup −3} S cm{sup −1}, 1.2 × 10{sup −3} S cm{sup −1}, and 8.2 × 10{sup −4} S cm{sup −1}, for x = 0.1; 0.15; and 0.2; respectively; and at 600 °C were 1.1 × 10{sup −1} S cm{sup −1}, 5.3 × 10{sup −2} S cm{sup −1}, and 2.8 ×10{sup −2} S cm{sup −1}, for x = 0.1; 0.15; and 0.2; respectively.

36 MATERIALS SCIENCE↗

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. II. Application—Effect of quantum confinement and homogeneous strain on Cu conductance

The Semi-Empirical tight binding model developed in Part I Hegde et al. [J. Appl. Phys. 115, 123703 (2014)] is applied to metal transport problems of current relevance in Part II. A systematic study of the effect of quantum confinement, transport orientation, and homogeneous strain on electronic transport properties of Cu is carried out. It is found that quantum confinement from bulk to nanowire boundary conditions leads to significant anisotropy in conductance of Cu along different transport orientations. Compressive homogeneous strain is found to reduce resistivity by increasing the density of conducting modes in Cu. The [110] transport orientation in Cu nanowires is found to be the most favorable for mitigating conductivity degradation since it shows least reduction in conductance with confinement and responds most favorably to compressive strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of silicene from first-principles

Silicene, as a graphene-like two-dimensional material, now receives exceptional attention of a wide community of scientists and engineers beyond graphene. Despite extensive study on its electric property, little research has been done to accurately calculate the phonon transport of silicene so far. In this paper, thermal conductivity of monolayer silicene is predicted from first-principles method. At 300 K, the thermal conductivity of monolayer silicene is found to be 9.4 W/mK and much smaller than bulk silicon. The contributions from in-plane and out-of-plane vibrations to thermal conductivity are quantified, and the out-of-plane vibration contributes less than 10% of the overall thermal conductivity, which is different from the results of the similar studies on graphene. The difference is explained by the presence of small buckling, which breaks the reflectional symmetry of the structure. The flexural modes are thus not purely out-of-plane vibration and have strong scattering with other modes.

36 MATERIALS SCIENCE↗

Cole-cole analysis and electrical conduction mechanism of N{sup +} implanted polycarbonate

In this paper, we present the analysis of the dielectric (dielectric constant, dielectric loss, a.c. conductivity) and electrical properties (I–V characteristics) of pristine and nitrogen ion implanted polycarbonate. The samples of polycarbonate were implanted with 100 keV N{sup +} ions with fluence ranging from 1 × 10{sup 15} to 1 × 10{sup 17} ions cm{sup −2}. The dielectric measurements of these samples were performed in the frequency range of 100 kHz to 100 MHz. It has been observed that dielectric constant decreases whereas dielectric loss and a.c. conductivity increases with increasing ion fluence. An analysis of real and imaginary parts of dielectric permittivity has been elucidated using Cole-Cole plot of the complex permittivity. With the help of Cole-Cole plot, we determined the values of static dielectric constant (ε{sub s}), optical dielectric constant (ε{sub ∞}), spreading factor (α), average relaxation time (τ{sub 0}), and molecular relaxation time (τ). The I–V characteristics were studied using Keithley (6517) electrometer. The electrical conduction behaviour of pristine and implanted polycarbonate specimens has been explained using various models of conduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗