SEARCH · Search NASA

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

All sources NASA NTRS DOE OSTI

DOE OSTI2013

M31 GLOBULAR CLUSTER STRUCTURES AND THE PRESENCE OF X-RAY BINARIES

The Andromeda galaxy, M31, has several times the number of globular clusters found in the Milky Way. It contains a correspondingly larger number of low-mass X-ray binaries (LMXBs) associated with globular clusters, and as such can be used to investigate the cluster properties that lead to X-ray binary formation. The best tracer of the spatial structure of M31 globulars is the high-resolution imaging available from the Hubble Space Telescope (HST), and we have used HST data to derive structural parameters for 29 LMXB-hosting M31 globular clusters. These measurements are combined with structural parameters from the literature for a total of 41 (of 50 known) LMXB clusters and a comparison sample of 65 non-LMXB clusters. Structural parameters measured in blue bandpasses are found to be slightly different (smaller core radii and higher concentrations) than those measured in red bandpasses; this difference is enhanced in LMXB clusters and could be related to stellar population differences. Clusters with LMXBs show higher collision rates for their mass compared to clusters without LMXBs, and collision rates estimated at the core radius show larger offsets than rates estimated at the half-light radius. These results are consistent with the dynamical formation scenario for LMXBs. A logistic regression analysis finds that, as expected, the probability of a cluster hosting an LMXB increases with increasing collision rate and proximity to the galaxy center. The same analysis finds that probability of a cluster hosting an LMXB decreases with increasing cluster mass at a fixed collision rate, although we caution that this could be due to sample selection effects. Metallicity is found to be a less important predictor of LMXB probability than collision rate, mass, or distance, even though LMXB clusters have a higher metallicity on average. This may be due to the interaction of location and metallicity: a sample of M31 LMXBs with a greater range in galactocentric distance would likely contain more metal-poor clusters and make it possible to disentangle the two effects.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2004

Measuring the Mass Distribution in Z is Approximately 0.2 Cluster Lenses with XMM, HST and CFHT

Being the most massive gravitationally bound objects in the Universe, clusters of galaxies are prime targets for studies of structure formation and evolution. Specifically the comoving space density of virialized clusters of a given mass (or X-ray temperature), but also the frequency and degree of substructure, as well as the shape of the cluster mass profile are quantities whose current values and evolution as a function of lookback time can provide important constraints on the cosmological and physical parameters of structure formation theories. The project funded by NASA grant NAG 5-10041 intended to take such studies to a new level by combining observations of a well-selected cluster sample by three state-of-the-art telescopes: HST, to accurately measure the mass distribution in the cluster core (approx. 0.5 h(sup -1)(sub 50) Mpc) via strong gravitational lensing; CFHT, to measure the large scale mass distribution out to approx. 3 Mpc via weak lensing; and XMM, to measure the gas density and temperature distribution accurately on intermediate scales < 1.5 Mpc. XMM plays a pivotal role in this context as the calibration of X-ray mass measurements through accurate, spatially resolved X-ray temperature measurements (particularly in the cosmologically most sensitive range of kT> 5 keV) is central to the questions outlined above. This set of observations promised to yield the best cluster mass measurements obtained so far for a representative sample, thus allowing us to: 1) Measure the high-mass end of the local cluster mass function; 2) Test predictions of a universal cluster mass profile; 3) calibrate the mass-temperature and temperature-luminosity relations for clusters and the scatter around these relations, which is vital for studies of cluster evolution using the X-ray temperature and X-ray luminosity functions.

Source record↗

DOE OSTI2013

Technical Letter Report of Slow-Strain-Rate Tensile Tests on Irradiated Stainless Steels in a PWR Environment

Slow-strain-rate tensile (SSRT) tests have been performed on irradiated specimens in a simulated pressurized water reactor (PWR) environment. The samples are miniature tensile specimens of various austenitic stainless steels (SSs) with different thermal-mechanical treatments commonly used for reactor core internal components. Neutron irradiation was carried out in the BOR-60 reactor, a sodium-cooled, fast breeder reactor in Russia, at ~320°C. The damage doses of the specimens are 5, 10, and 48 dpa (displacements per atom). All irradiated materials show significant irradiation hardening and loss of ductility in the SSRT tests. The yield strengths of cold-worked are higher than that of solution-annealed samples at all doses up to 48 dpa. While the irradiation hardening seems to saturate between ~5 and ~10 dpa, the loss of ductility continues to increase above 10 dpa. Strain softening is also observed for all irradiated materials above 5 dpa. Fractographic examinations show that ductile dimple fracture is the dominant morphology for all SSRT tests in the PWR environment. Small areas of transgranular, mixed mode and cleavage fractures are seen on most fracture surfaces in PWR water tests. Intergranular cracking is also observed in 48-dpa Types 316 and 347 SSs. Cracking susceptibility of the tested materials was evaluated with fracture morphology and time to failure. In general, high-doses cold-worked SSs are more susceptible to transgranular cleavage cracking in the PWR environment. Solution-annealed Type 347 SS is susceptible to intergranular cracking at 45 dpa in the PWR environment.

Chen, Y.↗

DOE OSTI2016

The next generation virgo cluster survey (NGVS). XIII. The luminosity and mass function of galaxies in the core of the virgo cluster and the contribution from disrupted satellites

We present measurements of the galaxy luminosity and stellar mass function in a 3.71 deg{sup 2} (0.3 Mpc{sup 2}) area in the core of the Virgo Cluster, based on u{sup ∗} griz data from the Next Generation Virgo Cluster Survey (NGVS). The galaxy sample—which consists of 352 objects brighter than M {sub g} = −9.13 mag, the 50% completeness limit of the survey—reaches 2.2 mag deeper than the widely used Virgo Cluster Catalog and at least 1.2 mag deeper than any sample previously used to measure the luminosity function in Virgo. Using a Bayesian analysis, we find a best-fit faint-end slope of α = −1.33 ± 0.02 for the g-band luminosity function; consistent results are found for the stellar mass function and the luminosity function in the other four NGVS bandpasses. We discuss the implications for the faint-end slope of adding 92 ultracompact dwarfs (UCDs)—previously compiled by the NGVS in this region—to the galaxy sample, assuming that UCDs are the stripped remnants of nucleated dwarf galaxies. Under this assumption, the slope of the luminosity function (down to the UCD faint magnitude limit, M {sub g} = −9.6 mag) increases dramatically, up to α = −1.60 ± 0.06 when correcting for the expected number of disrupted non-nucleated galaxies. We also calculate the total number of UCDs and globular clusters that may have been deposited in the core of Virgo owing to the disruption of satellites, both nucleated and non-nucleated. We estimate that ∼150 objects with M {sub g} ≲ −9.6 mag and that are currently classified as globular clusters might, in fact, be the nuclei of disrupted galaxies. We further estimate that as many as 40% of the (mostly blue) globular clusters in the Virgo core might once have belonged to such satellites; these same disrupted satellites might have contributed ∼40% of the total luminosity in galaxies observed in the core region today. Finally, we use an updated Local Group galaxy catalog to provide a new measurement of the luminosity function of Local Group satellites, α = −1.21 ± 0.05, which is only 1.7σ shallower than measured in the core of the Virgo Cluster.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2011

Gamma-Ray and Parsec-Scale Jet Properties of a Complete Sample of Blazars from the MOJAVE Program

We investigate the Fermi LAT gamma-ray and 15 GHz VLBA radio properties of a joint gamma-ray- and radio-selected sample of AGNs obtained during the first 11 months of the Fermi mission (2008 Aug 4 - 2009 Jul 5). Our sample contains the brightest 173 AGNs in these bands above declination -300 during this period, and thus probes the full range of gamma-ray loudness (gamma-ray to radio band luminosity ratio) in the bright blazar population. The latter quantity spans at least four orders of magnitude, reflecting a wide range of spectral energy distribution (SED) parameters in the bright blazar population. The BL Lac objects, however, display a linear correlation of increasing gamma-ray loudness with synchrotron SED peak frequency, suggesting a universal SED shape for objects of this class. The synchrotron self-Compton model is favored for the gamma-ray emission in these BL Lacs over external seed photon models, since the latter predict a dependence of Compton dominance on Doppler factor that would destroy any observed synchrotron SED peak - gamma-ray loudness correlation. The high-synchrotron peaked (HSP) BL Lac objects are distinguished by lower than average radio core brightness temperatures, and none display large radio modulation indices or high linear core polarization levels. No equivalent trends are seen for the flat-spectrum radio quasars (FSRQ) in our sample. Given the association of such properties with relativistic beaming, we suggest that the HSP BL Lacs have generally lower Doppler factors than the lower-synchrotron peaked BL Lacs or FSRQs in our sample.

Lister, M.L.↗

DOE OSTI2023

Binning is Sinning: Redemption for Hubble Diagram Using Photometrically Classified Type Ia Supernovae

Bayesian Estimation Applied to Multiple Species (BEAMS) is implemented in the BEAMS with Bias Corrections (BBC) framework to produce a redshift-binned Hubble diagram (HD) for Type Ia supernovae (SNe Ia). BBC corrects for selection effects and non–SN Ia contamination, and systematic uncertainties are described by a covariance matrix with dimension matching the number of BBC redshift bins. For spectroscopically confirmed SN Ia samples, a recent "Binning is Sinning" article showed that an unbinned HD and covariance matrix reduces the systematic uncertainty by a factor of ~1.5 compared to the binned approach. Here we extend their analysis to obtain an unbinned HD for a photometrically identified sample processed with BBC. To test this new method, we simulate and analyze 50 samples corresponding to the Dark Energy Survey (DES) with a low-redshift anchor; the simulation includes SNe Ia, and contaminants from core-collapse SNe and peculiar SNe Ia. The analysis includes systematic uncertainties for calibration and measures the dark energy equation of state parameter (w). Compared to a redshift-binned HD, the unbinned HD with nearly 2000 events results in a smaller systematic uncertainty, in qualitative agreement with BHS21, and averaging results among the 50 samples we find no evidence for a w-bias. To reduce computation time for fitting an unbinned HD with large samples, we propose an HD-rebinning method that defines the HD in bins of redshift, color, and stretch; the rebinned HD results in similar uncertainty as the unbinned case, and shows no evidence for a w-bias.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Low-Loss, High-Flux Saturation Magnetic Cores for Power Converters

As new and alternative energy sources are added to the energy grid, efficient and low-loss power converters are essential to the storage of energy from these intermittent power sources. Higher operating frequency can reduce the size and weight of transformers. However, current magnetic cores limit the operating frequency because core losses increase with frequency. Therefore, new magnetic core materials are needed with higher resistivity (lower eddy-current losses), lower coercivity (lower hysteresis losses), and higher permeability and flux density (higher power density). These new materials must be integrated into isolated power converters designed to optimize efficiency based on the transformer performance. To address this need, Mainstream pursued a two-pronged approach in Phase I to develop novel magnetic materials and model a planar transformer design. We irradiated silicon steel with a high-energy electron beam in an attempt to induce nanocrystalline grain formation. The nanocrystalline grains were expected to increase resistivity to reduce eddy-current losses and decrease coercivity to reduce hysteresis losses. We also modeled the transformer performance through Simulation Program with Integrated Circuit Emphasis (SPICE) and analytical models to establish the effect of magnetic properties of the core on the performance of the transformer. There still are hurdles to be overcome in Phase II. The electron beam processing was successful in increasing the resistivity and the flux saturation density. However, the resistivity is still too low for high-frequency magnetic cores, because the eddy-current losses would be prohibitively high. Additionally, the coercivity increased for the processed samples leading to higher hysteresis losses. In comparing our SPICE and analytical models to the planar transformer measured values and impedance plots, good agreement was seen for primary and secondary short-circuit impedance measurements and for primary-to-secondary capacitance measurements. The SPICE model deviated from measured values, though, when measuring the transformer open-circuit impedance, indicating that we might need to add more model complexity to the transformer model. Phase II research will continue to build on the transformer model and integrating novel magnetic materials into high-frequency transformers.

15 GEOTHERMAL ENERGY↗

DOE OSTI2020

WIYN Open Cluster Study. LXXXII. Radial-velocity Measurements and Spectroscopic Binary Orbits in the Open Cluster NGC 7789

We present an extensive time-series radial-velocity (RV) survey of stars in the rich open cluster NGC 7789 (1.6 Gyr, [Fe/H] = +0.02). The stellar sample lies within an 18′ circular radius from the cluster center (10 pc in projection, or about 2 core radii), and includes giants, red clump stars, blue stragglers, red stragglers, sub-subgiants, and main-sequence stars down to 1 mag below the turnoff. Our survey began in 2005 and comprises more than 9000 RV measurements from the Hydra Multi-Object Spectrograph on the WIYN 3.5 m telescope. We identify 624 likely cluster members and present the orbital solutions for 81 cluster binary stars with periods between 1.45 and 4200 days. From the main-sequence binary solutions we fit a circularization period of 7.2{sub −1.1}{sup +0.6} days. We calculate an incompleteness-corrected main-sequence binary frequency of 31% ± 4% for binaries with periods less than 10{sup 4} days, similar to other WIYN Open Cluster Survey (WOCS) open clusters of all ages. We detect a blue straggler binary frequency of 33% ± 17%, consistent with the similarly aged open cluster NGC 6819. We also find one secure, rapidly rotating sub-subgiant and one red straggler candidate in our sample.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2002

Optimal Extraction with Sub-sampled Line-Spread Functions

STIS long-slit medium resolution spectra reduced in CALSTIS extended-source mode with narrow extraction heights (GWIDTH=3 pixels) show photometric uncertainties of +/- 3% relative to point-source extractions. These uncertainties are introduced through interpolation in the spectral image rectification processing stage, and are correlated with the number of pixel crossings the spectral profile core encounters in the spatial direction. The line-spread-function may be determined as a function of pixel crossing- position from calibration data sub-sampled in the spatial direction. This line spread function will be applied to science data to perform optimal extractions and point- source de-blending. Wavelength and breathing effects will be studied. Viability of the method to de-convolve extended source 'blobs' will be investigated.

Collins, Nicholas R.↗

DOE OSTI2022

Gamma Irradiation of NaCl-UCl 3 Salt for the Molten Chloride Fast Reactor

This report documents the results of the gamma ray irradiation of NaCl-UCl 3 eutectic salt in the Advanced Test Reactor (ATR) spent fuel pool gamma tube and subsequent analysis of capsules utilizing the Gas Assay Sample and Recharge (GASR) system. NaCl-UCl 3 salt capsules at four different temperatures, 75C, 150C, 300C and 600C, were irradiated shortly after the core internal changeout (CIC) of the ATR, beginning April 28 th of 2021, and ending on August 18 th of 2021. Re-positioning of the fuel elements in the spent fuel pool to move more fresh fuel elements around the gamma tube occurred on May 11 th of 2021, resulting in an approximate 20% increase in the dose rate and consequently the total absorbed dose. In total, the salt-filled capsules underwent 2638 hours of gamma irradiation from the adjacent freshly discharged ATR spent fuel. Capsule internal pressure measurements were taken via the Gas Assay Sample and Recharge (GASR) system in the INL Hot Fuels Examination Facility (HFEF) following completion of the irradiation. Based on the GASR analysis results, the primary conclusion from this experiment to-date is that radiolytic generation of chlorine gas is insignificant for the dose rates and total absorbed dose that these samples experienced. To elucidate more detailed effects of radiolysis on NaCl-UCl 3 eutectic salts and reach a more definitive conclusion, further advanced analyses such as electron microscopy, simultaneous thermal analysis, and electron paramagnetic resonance are recommended to analyze the capsule wall and salt samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2008

Ultraviolet Spectroscopy of Supernovae: The First Two Years of Swift Observations

We present the entire sample of ultraviolet (1JV) spectra of supernovae (SNe) obtained with the Ultraviolet/Optical Telescope (UVOT) on board the Swift satellite during the first 2 years of observations (2005/2006). A total of 31 UV-grism and 22 V-grism spectra of 9 supernovae (SNe) have been collected. of which 6 are thermonuclear (type Ia) and 3 core collapse (type Ibc/II) SNe. All the spectra have been obtained during the photospheric phase. After a comparison of the spectra of our sample with those in the literature (SNe 1992A. 1990N and 1999em). we confirm some degree of diversity in the UV emission of Type Ia SNe and a greater homogeneity in the Type I1 Plateau SN sample. Signatures of interaction between the ejecta and the circumstellar environment have been found in the UV spectrum of SN 2006jc, the only SN Type Ib/c for which UVOT grism data are available. Currently, Swift LJVOT is the best suited instrument for early SN studies in the UV due to its fast response and flexible scheduling capabilities. However. in order to increase the quality of the data and significantly improve our understanding of the lJV properties of SNe and to fully maximize the scientific potential of UVOT grism observations. a larger investment in obsen~ing time and longer exposures are needed.

Immler, Stefan↗

DOE OSTI2015

STELLAR RADIAL VELOCITIES IN THE OLD OPEN CLUSTER M67 (NGC 2682). I. MEMBERSHIPS, BINARIES, AND KINEMATICS

We present results from 13776 radial-velocity (RV) measurements of 1278 candidate members of the old (4 Gyr) open cluster M67 (NGC 2682). The measurements are the results of a long-term survey that includes data from seven telescopes with observations for some stars spanning over 40 years. For narrow-lined stars, RVs are measured with precisions ranging from about 0.1 to 0.8 km s{sup −1}. The combined stellar sample reaches from the brightest giants in the cluster down to about 4 mag below the main-sequence turnoff (V=16.5), covering a mass range of about 1.34 M{sub ⊙} to 0.76 M{sub ⊙}. Spatially, the sample extends to a radus of 30 arcmin (7.4 pc in projection at a distance of 850 pc or 6–7 core radii). We find M67 to have a mean RV of +33.64 km s{sup −1} (with an internal precision of ±0.03 km s{sup −1}) well separated from the mean velocity of the field. For stars with ⩾3 measurements, we derive RV membership probabilities and identify RV variables, finding 562 cluster members, 142 of which show significant RV variability. We use these cluster members to construct a color–magnitude diagram and identify a rich sample of stars that lie far from the standard single star isochrone, including the well-known blue stragglers, sub-subgiants and yellow giants. These exotic stars have a binary frequency of (at least) 80%, more than three times that detected for stars in the remainder of the sample. We confirm that the cluster is mass segregated, finding the binaries to be more centrally concentrated than the single stars in our sample at the 99.8% confidence level (and at the 98.7% confidence level when only considering main-sequence stars). The blue stragglers are centrally concentrated as compared to the solar-type main-sequence single stars in the cluster at the 99.7% confidence level. Accounting for measurement precision, we derive an RV dispersion in M67 of 0.80 ± 0.04 km s{sup −1} for our sample of single main-sequence stars, subgiants and giants with V⩽15.5. When corrected for undetected binaries, this sample yields a true RV dispersion of 0.59{sub −0.06}{sup +0.07} km s{sup −1}. The radial distribution of the velocity dispersion is consistent with an isothermal distribution within our stellar sample. Using the cluster RV dispersion, we estimate a virial mass for the cluster of 2100{sub −550}{sup +610} M{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

A low-luminosity core-collapse supernova very similar to SN 2005cs

ABSTRACT We present observations and analysis of PSN J17292918+7542390, a low-luminosity Type II-P supernova (LL SN IIP). The observed sample of such events is still low, and their nature is still under debate. Such SNe are similar to SN 2005cs, a well-observed LL Type II-P event, having low expansion velocities, and small ejected 56Ni mass. We have developed a robust and relatively fast Monte Carlo code that fits semi-analytic models to light curves of core-collapse SNe. This allows the estimation of the most important physical parameters, like the radius of the progenitor star, the mass of the ejected envelope, the mass of the radioactive nickel synthesized during the explosion, among others. PSN J17292918+7542390 has $R_0 = 91_{-70}^{+119} \times 10^{11} \, \text{cm}$, $M_\text{ej} = 9.89_{-1.00}^{+2.10} \, \mathrm{ M}_{\odot }$, $E_{\mbox{kin}} = 0.65_{-0.18}^{+0.19} \, \text{foe}$, and $v_{\mbox{exp}} = 3332_{-347}^{+216}$ km s−1, for its progenitor radius, ejecta mass, kinetic energy, and expansion velocity, respectively. The initial nickel mass of the PSN J17292918+7542390 turned out to be $1.55_{-0.70}^{+0.75} \times 10^{-3} \, \mathrm{M}_{\odot }$. The measured photospheric velocity at the earliest observed phase is 7000 km s−1. As far as we can tell based on the small population of observed LL SNe IIP, the determined values are typical for these events.

Jäger, Jr, Zoltán↗

DOE OSTI2018

Effects of the annealing process on the structure and valence state of vanadium oxide thin films

Highlights: • TGA-DSC was used to determine the annealing temperature generally. • Pure VO{sub 2} (M) film was obtained with some annealing process. • The film surface transits from layer to grains as the annealing temperature increases. • Spans of O1s and V2p{sub 3/2} core level of V{sup 5+}, V{sup 4+}, V{sup 3+} were 12.75, 14.0 and 14.7 eV. • The Tc of pure VO{sub 2} (M) was 64.3 °C, its hysteresis loop width was 12.1 °C. - Abstract: V{sub 2}O{sub 5} was used to prepare vanadium oxide films via the sol-gel method. The “n” in V{sub 2}O{sub 5}∙nH{sub 2}O was determined to be approximately 1.67. After annealing at 390 °C for 4 h, a pure VO{sub 2} (M) phase was obtained and denoted sample Ⅴ. The crystallite sizes of VO{sub 2} (M) in samples Ⅱ, Ⅲ, Ⅳ and Ⅴ were 42, 41, 35 and 24 nm, respectively. The surface morphology of sample Ⅰ was flat; however, many small, dense particles covered the surface of sample Ⅴ. Sample Ⅱ had a layered structure, and samples Ⅲ and Ⅳ consisted of compact grains. The binding energy (BE) differences between the O1s and the V{sup 5+}2p{sub 3/2}, V{sup 4+}2p{sub 3/2}, and V{sup 3+}2p{sub 3/2} core levels were 12.75, 14.0 and 14.7 eV, respectively. For the sample Ⅴ film, the maximum transmittance change at 2500 nm was 39%, the phase transition temperature (Tc) was 64.3 °C, and the hysteresis loop width was 12.1 °C.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Integrating Experiments and Well Logs to Predict Caney Shale Static Mechanical Properties During Production with Supervised Machine Learning

Caney shale is one of the emerging oil reservoirs in Oklahoma. Understanding the impact of effective stress on its mechanical properties is critical for predicting hydraulic fracture geometry and overall hydrocarbon production. The objective of our study is to evaluate the impact of effective stress on the dynamic Young’s modulus using ultrasonic velocity measurements for Caney shale samples. A triaxial cell was utilized to measure ultrasonic (P-wave and S-wave) velocities for ten downhole Caney shale samples under various effective stresses to indirectly assess the impact of pore pressure change. The dynamic Young’s moduli estimated from these measurements were integrated with available conventional well logs (excluding sonic logs) and triaxial test results from Benge et al. (2021) to predict the static Young’s modulus using Random Forest (RF) and Extreme Gradient Boosting (XGBoost) models. The results showed that the estimated dynamic Young’s moduli from ultrasonic measurements were higher than the corresponding static Young’s modulus of cores from the same vertical well at similar depths. With increasing effective stress, the dynamic Young’s modulus increased for all samples. The estimated dynamic-to-static correction factor tended to be higher in zones of high neutron porosity (PHIN) and low density compared to other zones. Finally, SHapley Additive exPlanations (SHAP) for RF and XGBoost models identified depth, gamma ray (GR), and PHIN as key features for predicting the static Young’s modulus. This study enhances our understanding of the dynamic and static Young’s moduli for the Caney shale interval, as a function of effective stress and conventional well logs. The findings from this study can improve predictions of production throughout the well's lifespan by offering insights into the mechanical property degradation resulting from pore pressure depletion.

Kholy, Sherif M.↗

DOE OSTI2014

Case depth verification of hardened samples with Barkhausen noise sweeps

An interesting topic of recent Barkhausen noise (BN) method studies is the application of the method to case depth evaluation of hardened components. The utilization of BN method for this purpose is based on the difference in the magnetic properties between the hardened case and the soft core. Thus, the detection of case depth with BN can be achieved. The measurements typically have been carried out by using low magnetizing frequencies which have deeper penetration to the ferromagnetic samples than the conventional BN measurement. However, the penetration depth is limited due to eddy current damping of the signal. We introduce here a newly found sweep measurement concept for the case depth evaluation. In this study sweep measurements were carried out with various magnetizing frequencies and magnetizing voltages to detect the effect of different frequency and voltage and their correspondence to the actual case depth values verified from destructive characterization. Also a BN measurement device that has an implemented sweep analysis option was utilised. The samples were either induction or case-hardened samples and sample geometry contained both rod samples and gear axle samples with different case depth values. Samples were also further characterized with Xray diffraction to study the residual stress state of the surface. The detailed data processing revealed that also other calculated features than the maximum slope division of the 1st derivative of the BN signal could hold the information about the case depth value of the samples. The sweep method was able to arrange the axles into correct order according to the case depth value even though the axles were used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2015

Visualization of expanding warm dense gold and diamond heated rapidly by laser-generated ion beams

With the development of several novel heating sources, scientists can now heat a small sample isochorically above 10,000 K. Although matter at such an extreme state, known as warm dense matter, is commonly found in astrophysics (e.g., in planetary cores) as well as in high energy density physics experiments, its properties are not well understood and are difficult to predict theoretically. This is because the approximations made to describe condensed matter or high-temperature plasmas are invalid in this intermediate regime. A sufficiently large warm dense matter sample that is uniformly heated would be ideal for these studies, but has been unavailable to date. We have used a beam of quasi-monoenergetic aluminum ions to heat gold and diamond foils uniformly and isochorically. For the first time, we visualized directly the expanding warm dense gold and diamond with an optical streak camera. Furthermore, we present a new technique to determine the initial temperature of these heated samples from the measured expansion speeds of gold and diamond into vacuum. We anticipate the uniformly heated solid density target will allow for direct quantitative measurements of equation-of-state, conductivity, opacity, and stopping power of warm dense matter, benefiting plasma physics, astrophysics, and nuclear physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Construction of CQDs-Bi{sub 20}TiO{sub 32}/PAN electrospun fiber membranes and their photocatalytic activity for isoproturon degradation under visible light

Highlights: • The flexible fiber membranes were prepared by coaxial electrospinning technique. • CQDs-Bi{sub 20}TiO{sub 32} photocatalyst was uniformly fixed on the surfaces of PAN fibers. • The fiber membranes had high photocatalytic activity for degradation of isoproturon. • The composite fiber membranes exhibited good recyclability. - Abstract: The CQDs-Bi{sub 20}TiO{sub 32} photocatalysts exhibited high visible-light responsive photocatalytic activity. To achieve the cyclic utilization of CQDs-Bi{sub 20}TiO{sub 32}, the novel flexible CQDs-Bi{sub 20}TiO{sub 32}/PAN fiber membranes were prepared by a simple coaxial electrospinning technique. It was found that the CQDs-Bi{sub 20}TiO{sub 32} photocatalyst could be firmly and uniformly fixed on the surfaces of electrospun fibers and the composite fiber membranes possessed the hierarchical macro- and mesoporous structure. The loaded CQDs-Bi{sub 20}TiO{sub 32} endowed the composite fiber with an obvious photocatalytic activity for the degradation of the herbicide isoproturon under visible light irradiation. Among these samples, S3 at photocatalyst dosage 15 w/v% had the highest degradation efficiency for isoproturon. Meanwhile, the core-shell structured inorganic-organic hybrid fiber membranes have a significant advantage in the recyclability for photocatalyts. The flexible CQDs-Bi{sub 20}TiO{sub 32}/PAN electrospun fiber membranes would have potential applications in efficient removal of organic contaminants.

36 MATERIALS SCIENCE↗