Search NASA⌕ Search

SEARCH · Search NASA

Results for “data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Contributions of cretaceus quiet zone natural remanent magnetization to Magsat anomalies in the Southwest Indian Ocean

The Magsat magnetic anomalies over the Southwest Indian Ocean are modeled using a combination of induced plus viscous remanent magnetization (IM/VRM) and natural remanent magnetization (NRM). Two broad, roughly parallel, SW to NE trending triple-peaked positive anomalies dominate the region, one lying south of Africa and the other north of Antarctica. Although these anomaly peaks generally correspond with the Agulhas Plateau/Maud Rise, Mozambique Plateau/Astrid Ridge, and Madagascar Ridge/Conrad Rise conjugate pairs, the IM/VRM contribution from structural characteristics (i.e., crustal thickness) accounts for only about 20% of the anomaly amplitudes. A spatially variable but observationally constrained NRM contribution in Cretaceous Quiet Zone (KQZ) crust is required to account for the location, shape, and amplitude contrast of these anomalies. Many crustal features in the Southwest Indian Ocean near Antarctica have little geophysical data to constrain their structure but do hagve tectonic conjugates near Africa for which much more geophysical data are generally available. Using geophysical and geological constraints from one member to model the magnetization structure of its conjugate reproduces the observed Magsat reduced-to-pole anomalies over both structures very well. This suggests that no significant alteration in their magnetization structure has occurred since the features split. Models of these conjugate structures show that IM/VRM reproduces the Magsat anomalies associated with non-KQZ crust but that both IM/VRM and a dominant NRM component are required to explain the anomalies associated with KQZ crust.

Fullerton, Lawrence G.↗

Spacelab - Beyond development

Spacelab is a series of multiple configuration payload carriers that fit in the Orbiter cargo bay. The carriers, ranging from pressurized modules to simple support structures that span across the cargo bay, provide a variety of payload support services, such as cooling, power distribution, data management, pointing, and structural attachment. Previously published papers have addressed the joint development of the initial Spacelab system by the European Space Agency (ESA) and the National Aeronautics and Space Administration (NASA). Herein, the emphasis will be on the NASA utilization and evaluation of the system into the operational era of the Space Transportation System (STS), system enhancement, additional carrier configuration, the effects of time on system hardware, and subsequent replacements and improvement. All configurations added were intended to fulfill payload requirements not originally foreseen. Subsystem replacements thus far have resulted from life limits or unreliable performance while assessments and plans are underway to look also for increased performance and new payload requirements, to the transition from Spacelab to the Space Station Freedom.

Johnson, Charles W.↗

TUNS/TCIS information model/process model

An Information Model is comprised of graphical and textual notation suitable for describing and defining the problem domain - in our case, TUNS or TCIS. The model focuses on the real world under study. It identifies what is in the problem and organizes the data into a formal structure for documentation and communication purposes. The Information Model is composed of an Entity Relationship Diagram (ERD) and a Data Dictionary component. The combination of these components provide an easy to understand methodology for expressing the entities in the problem space, the relationships between entities and the characteristics (attributes) of the entities. This approach is the first step in information system development. The Information Model identifies the complete set of data elements processed by TUNS. This representation provides a conceptual view of TUNS from the perspective of entities, data, and relationships. The Information Model reflects the business practices and real-world entities that users must deal with.

Wilson, James↗

Arctic and Antarctic Sea Ice Concentrations from Multichannel Passive-Microwave Satellite Data Sets: October 1978-September 1995 User's Guide

Satellite multichannel passive-microwave sensors have provided global radiance measurements with which to map, monitor, and study the Arctic and Antarctic polar sea ice covers. The data span over 18 years (as of April 1997), starting with the launch of the Scanning Multichannel Microwave Radiometer (SMMR) on NASA's SeaSat A and Nimbus 7 in 1978 and continuing with the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave/Imager (SSMI) series beginning in 1987. It is anticipated that the DMSP SSMI series will continue into the 21st century. The SSMI series will be augmented by new, improved sensors to be flown on Japanese and U.S. space platforms. This User's Guide provides a description of a new sea ice concentration data set generated from observations made by three of these multichannel sensors. The data set includes gridded daily ice concentrations (every-other-day for the SMMR data) for both the north and south polar regions from October 26, 1978 through September 30, 1995, with the one exception of a 6-week data gap from December 3, 1987 through January 12, 1988. The data have been placed on two CD-ROMs that include a ReadMeCD file giving the technical details on the file format, file headers, north and south polar grids, ancillary data sets, and directory structure of the CD-ROM. The CD-ROMS will be distributed by the National Snow and Ice Data Center in Boulder, CO.

Sea ice concentration↗

ICAP: An Interactive Cluster Analysis Procedure for analyzing remotely sensed data

An Interactive Cluster Analysis Procedure (ICAP) was developed to derive classifier training statistics from remotely sensed data. The algorithm interfaces the rapid numerical processing capacity of a computer with the human ability to integrate qualitative information. Control of the clustering process alternates between the algorithm, which creates new centroids and forms clusters and the analyst, who evaluate and elect to modify the cluster structure. Clusters can be deleted or lumped pairwise, or new centroids can be added. A summary of the cluster statistics can be requested to facilitate cluster manipulation. The ICAP was implemented in APL (A Programming Language), an interactive computer language. The flexibility of the algorithm was evaluated using data from different LANDSAT scenes to simulate two situations: one in which the analyst is assumed to have no prior knowledge about the data and wishes to have the clusters formed more or less automatically; and the other in which the analyst is assumed to have some knowledge about the data structure and wishes to use that information to closely supervise the clustering process. For comparison, an existing clustering method was also applied to the two data sets.

Wharton, S. W.↗

Observation of 3-6 day meridional wind oscillations over the tropical Pacific, 1973-1992: Vertical structure and interannual variability

Rawinsonde data from tropical Pacific stations were examined for westward-propagating 3-6-day meridional wind oscillations in the troposphere and lower stratosphere, 1973-1992. Four types were identified from cross-spectrum and principal component analysis. (1) The dominant oscillation, near 250 mb, had a period slightly greater than 5 days, zonal wavenumber 4-6, and modified Rossby-gravity structure near the date line. (2) In the western Pacific lower troposphere there was broadband activity with short zonal scale, coupled to upper-tropospheric waves in NH summer. (3) In the central Pacific, during NH autumn, there was a well-defined approximately 4 1/2-day oscillation with maximum amplitude in the lower troposphere and baroclinic phase tilt above. The vertical structure suggested coupling to deep tropical convection; this interpretation was supported by correlation of meridional wind with antisymmetric outgoing longwave radiation. (4) In the stratosphere, Rossby-gravity waves had periods less than or equal to 4 days and zonal wavenumber 3-4. Unlike tropospheric waves, these disturbances were coherent in a shallow layer, largest in west phase of quasi-biennial oscillation (QBO) and annual cycle (NH winter-spring).

Dunkerton, Timothy J.↗

Microstructural Characterization of Metal Foams: An Examination of the Applicability of the Theoretical Models for Modeling Foams

Establishing the geometry of foam cells is useful in developing microstructure-based acoustic and structural models. Since experimental data on the geometry of the foam cells are limited, most modeling efforts use an idealized three-dimensional, space-filling Kelvin tetrakaidecahedron. The validity of this assumption is investigated in the present paper. Several FeCrAlY foams with relative densities varying between 3 and 15 percent and cells per mm (c.p.mm.) varying between 0.2 and 3.9 c.p.mm. were microstructurally evaluated. The number of edges per face for each foam specimen was counted by approximating the cell faces by regular polygons, where the number of cell faces measured varied between 207 and 745. The present observations revealed that 50 to 57 percent of the cell faces were pentagonal while 24 to 28 percent were quadrilateral and 15 to 22 percent were hexagonal. The present measurements are shown to be in excellent agreement with literature data. It is demonstrated that the Kelvin model, as well as other proposed theoretical models, cannot accurately describe the FeCrAlY foam cell structure. Instead, it is suggested that the ideal foam cell geometry consists of 11 faces with three quadrilateral, six pentagonal faces and two hexagonal faces consistent with the 3-6-2 Matzke cell. A compilation of 90 years of experimental data reveals that the average number of cell faces decreases linearly with the increasing ratio of quadrilateral to pentagonal faces. It is concluded that the Kelvin model is not supported by these experimental data.

Raj, S. V.↗

Cosmic ray decreases and shock structure: A multispacecraft study

We examine greater than 60-MeV/amu ion data from three spacecraft (IMP 8 and Helios 1 and 2) at the time of a number of short term (less than 20-day duration) cosmic ray decreases (greater than 1 GeV) detected by ground-based neutron monitors in the years 1976 to 1979. The multispacecraft data allow us to investigate the structure of the modulation region and in particular the relative importance, as a function of location, of the shock and shock driver (ejecta) in causing the reduction in particle densities. Although the shocks contributing to cosmic ray decrease often have particle enhancements associated with them in the greater than 60-meV/amu data, this is not the case for three of the events discussed in this paper where a shock-associated decrease is also evident. Whereas the shock can cause an increase or decrease at low (i.e., less than neutron monitor) energies, the reduction of particle densities in the driver, if it is intercepted, is usually evident at all energies. Thus the overall shape of a decrease at greater than 60 MeV/amu depends primarily on whether the ejecta is intercepted. We find that the particle density inside ejecta increases with increasing radical distance from the Sun. In many of the events in this study, entry and exit of ejecta are accompanied by abrupt changes in the decrease and recovery rates which indicate that the effect of the ejecta is local. In contrast, the effect of the shock lasts many days after the shock has passed by and is evident at large angular distances from the longitude of the solar source, i.e., the effect of the shock is nonlocal. Within 1 AU there seems to be no radial dependence of the shock effect. One cosmic ray decrease seen at Earth, which had an unusual profile, can be understood if the median plane of the ejecta was inclined to the ecliptic.

Cane, H. V.↗

Atomic Oxygen Erosion Yield Predictive Tool for Spacecraft Polymers in Low Earth Orbit

A predictive tool was developed to estimate the low Earth orbit (LEO) atomic oxygen erosion yield of polymers based on the results of the Polymer Erosion and Contamination Experiment (PEACE) Polymers experiment flown as part of the Materials International Space Station Experiment 2 (MISSE 2). The MISSE 2 PEACE experiment accurately measured the erosion yield of a wide variety of polymers and pyrolytic graphite. The 40 different materials tested were selected specifically to represent a variety of polymers used in space as well as a wide variety of polymer chemical structures. The resulting erosion yield data was used to develop a predictive tool which utilizes chemical structure and physical properties of polymers that can be measured in ground laboratory testing to predict the in-space atomic oxygen erosion yield of a polymer. The properties include chemical structure, bonding information, density and ash content. The resulting predictive tool has a correlation coefficient of 0.914 when compared with actual MISSE 2 space data for 38 polymers and pyrolytic graphite. The intent of the predictive tool is to be able to make estimates of atomic oxygen erosion yields for new polymers without requiring expensive and time consumptive in-space testing.

Bank, Bruce A.↗

3D Scanning Laboratory

The 3D Scanning Lab uses a number of technologies to capture 3D surface data. Those technologies are structured light scanning, discrete point measurement photogrammetry and Light Detecting and Ranging(LIDAR). Structured light is a non-contact optical technique used to capture as built surface geometries quickly and accurately. LIDAR is a laser scanning technique used to capture 3D surfaces. And photogrammetry uses a certified DSLR camera to measure discrete registered and non-registered points in 3D space. MSFC’s 3D Scanning Team uses 3D scanning to provide hardware inspections, reverse engineered CAD models, manufacturing/process development and digital assemblies. The inspection process compares the captured data to CAD, providing a color plot detailing the deviations of the scan data to the CAD model. Dimensional measurements and GD&T can also be interrogated. Inspection can provide scan-to-scan data comparisons which is ideal for assessing tested hardware, e.g. comparing data captured before and after hardware testing. Reverse engineering is used to develop CAD models from scan data. This is useful for heritage hardware studies, developing building or structural models and inputs for simulation studies and design efforts. The lab uses the 3D surface scan data to drive manufacturing/machining processes, termed match machining. This technique has been used to modify nozzles, injectors, additive manufactured parts, composite barrel sections, etc. Parts of an assembly can be scanned and assembled in a virtual environment providing an accurate 3D representation of the assembled hardware in its as-scanned state. This can provide detailed information of internal components that would otherwise not be accessible.

Advanced Manufacturing↗

The meteorology of Jupiter

From the point of view of meteorology the most important differences between Jupiter and the earth are related to the fact that Jupiter has an appreciable internal energy source and probably lacks a solid surface. The composition and vertical structure of the Jovian atmosphere is considered along with the composition of Jovian cloud particles, turbulence in Jupiter's atmosphere, data on the horizontal structure and motions of the atmosphere, and questions related to the longevity of Jupiter's clouds. Attention is given to the barotropic characteristics of Jupiter's atmosphere, the radiation balance in the atmosphere of the earth and of Jupiter, and studies of the Great Red Spot.

Ingersoll, A. P.↗

Use of ordination and classification procedures to evaluate phytoplankton communities during Superflux II

Cluster analysis and an ordination procedure were performed on two data matrices to investigate real and environmental spatial relationships. Multiple regression analysis was used to relate the measured environmental variables to the phytoplankton community changes. Qualitative type phytoplankton data proved to be less structured in both of these spaces, relative to the biomass data. The salinity gradients of the northern transects covaried significantly with the phytoplankton association changes. In the southern transects the light variable was most important in explaining the variance in the ordination axes. These data suggest the close relationships between phytoplankton community changes and the physical hydrology of the area.

Rutledge, C. K.↗

Visualization of second order tensor fields and matrix data

We present a study of the visualization of 3-D second order tensor fields and matrix data. The general problem of visualizing unsymmetric real or complex Hermitian second order tensor fields can be reduced to the simultaneous visualization of a real and symmetric second order tensor field and a real vector field. As opposed to the discrete iconic techniques commonly used in multivariate data visualization, the emphasis is on exploiting the mathematical properties of tensor fields in order to facilitate their visualization and to produce a continuous representation of the data. We focus on interactively sensing and exploring real and symmetric second order tensor data by generalizing the vector notion of streamline to the tensor concept of hyperstreamline. We stress the importance of a structural analysis of the data field analogous to the techniques of vector field topology extraction in order to obtain a unique and objective representation of second order tensor fields.

Delmarcelle, Thierry↗

A concise introduction to MARC

The record structure, content designation and data content that make up a MAchine-Readable Cataloging (MARC) record are described. Distinguishing characteristics of the MARC record structure are identified and content designations are defined. The use of MARC as both an American national standard (ANSI Z39.2) and an international standard (ISO 2709) is noted. The relational between MARC and the Standardized General Markup Language (SGML) is explored and areas of overlap are identified.

Barry, Randall K.↗

Bi-Metallic Composite Structures With Designed Internal Residual Stress Field

Shape memory alloys (SMA) have a unique ability to recover small amounts of plastic strain through a temperature induced phase change. For these materials, mechanical displacement can be accomplished by heating the structure to induce a phase change, through which some of the plastic strain previously introduced to the structure can be reversed. This paper introduces a concept whereby an SMA phase is incorporated into a conventional alloy matrix in a co-continuous reticulated arrangement forming a bi-metallic composite structure. Through memory activation of the mechanically constrained SMA phase, a controlled residual stress field is developed in the interior of the structure. The presented experimental data show that the memory activation of the SMA composite component significantly changes the residual stress distribution in the overall structure. Designing the structural arrangement of the two phases to produce a controlled residual stress field could be used to create structures that have much improved durability and damage tolerance properties.

Brice, Craig A.↗

Topography of Closed Depressions, Scarps, and Grabens in the North Tharsis Region of Mars: Implications for Shallow Crustal Discontinuities and Graben Formation

Using Viking Orbiter images, detailed photoclinometric profiles were obtained across irregular depressions, fretted fractures, troughs and pits, solitary scarps, and simple grabens in the north Tharsis region of Mars. This data allows inferences to be made on the shallow crustal structure of this region. Topographical data obtained for Mars is discussed in relation to mechanical discontinuities.

astrogeology↗