Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Absolute calibration of the DANCE thermal neutron beam using sodium activation

The calculation of the neutron capture cross section as a function of energy in the thermal range requires a precise knowledge of the absolute neutron flux. In this paper a method of calibrating a thermal neutron beam using the controlled activation of sodium is described. Here, the method is applied to the FP-14 Time Of Flight neutron beam line at the Los Alamos Neutron Science Center to calibrate the beam to an uncertainty level of ±5 %.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Excitation energy dependence of fragment-mass distributions from fission of 180,190 Hg formed in fusion reactions of 36 Ar + 144,154 Sm

Mass distributions of fission fragments from the compound nuclei 180 Hg and 190 Hg formed in fusion reactions 36 Ar + 144 Smand 36 Ar + 154 Sm, respectively, were measured at initial excitation energies of E* ( 180 Hg) = 33-66 MeV and E* ( 190 Hg) = 48-71 MeV. In the fission of 180 Hg, the mass spectra were well reproduced by assuming only an asymmetric-mass division, with most probable light and heavy fragment masses $\overline{A}_L$ / $\overline{A}_H$ = 79/101. The mass asymmetry for 180 Hg agrees well with that obtained in the low-energy β + /EC-delayed fission of 180 Tl, from our earlier ISOLDE(CERN) experiment. Fission of 190 Hg is found to proceed in a similar way, delivering the mass asymmetry of $\overline{A}_L$ / $\overline{A}_H$ = 83/107, throughout the measured excitation energy range. The persistence as a function of excitation energy of the mass-asymmetric fission for both proton-rich Hg isotopes gives strong evidence for the survival of microscopic effects up to effective excitation energies of compound nuclei as high as 40 MeV. In conclusion, this behavior is different from fission of actinide nuclei and heavier mercury isotope 198 Hg.

(180↗
DOE OSTI2016

Long-lived K isomer and enhanced γ vibration in the neutron-rich nucleus 172 Dy: Collectivity beyond double midshell

The level structure of 172Dy has been investigated for the first time by means of decay spectroscopy following in-flight fission of a 238U beam. A long-lived isomeric state with T1/2 = 0.71(5) s and Kπ = 8- has been identified at 1278 keV, which decays to the ground-state and γ -vibrational bands through hindered electromagnetic transitions, as well as to the daughter nucleus 172Ho via allowed β decays. The robust nature of the Kπ = 8- isomer and the ground-state rotational band reveals an axially-symmetric structure for this nucleus. Meanwhile, the γ -vibrational levels have been identified at unusually low excitation energy compared to the neighboring well-deformed nuclei, indicating the significance of the microscopic effect on the non-axial collectivity in this doubly mid-shell region. The underlying mechanism of enhanced γ vibration is discussed in comparison with the deformed Quasiparticle Random-Phase Approximation based on a Skyrme energy-density functional.

172Dy↗
DOE OSTI2023

Hexadecapole strength in the rare isotopes 74,76 Kr

In the Ge-Sr mass region, isotopes with neutron number N ≤ 40 are known to feature rapid shape changes with both nucleon number and angular momentum. To gain new insights into their structure, inelastic proton scattering experiments in inverse kinematics were performed on the rare isotopes 74,76 Kr. This work focuses on observables related to the J π = $4$$^{+}_{1}$ states of the Kr isotopes and, in particular, on the hexadecapole degree of freedom. By performing coupled-channels calculations, hexadecapole deformation parameters β 4 were determined for the J π = $4$$^{+}_{1}$ states of 74,76 Kr from inelastic proton scattering cross sections. Two possible coupled-channels solutions were found. A comparison to predictions from nuclear energy density functional theory, employing both non-relativistic and relativistic functionals, clearly favors the large, positive β 4 solutions. These β 4 values are unambiguously linked to the well deformed prolate configuration. Given the β 2 - β 4 trend, established in this work, it appears that β 4 values could provide a sensitive measure of the nuclear shell structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Enumeration as a Tool for Structure Solution: A Materials Genomic Approach to Solving the Cation-Ordered Structure of Na 3 V 2 (PO 4 ) 2 F 3

While powder diffraction methods are routinely utilized to optimize structural models for compounds whose crystal structures are known, the determination of unknown structures is far more challenging. When the unknown structure is large, structure solution can become a virtually intractable problem using standard structure solution methodologies, especially when the space group cannot be unambiguously resolved. One such system is the promising Na-ion battery cathode material Na 3 V 2 (PO 4 ) 2 F 3 whose high temperature and room temperature structures were previously solved, but whose more complex low-temperature structure could not be determined. Here, a novel materials genomic approach is demonstrated for the solution of the unknown 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 in which enumeration methods are first used to generate a large number (~3,000) of trial structures based on plausible orderings of Na ions and then automated Rietveld refinements are carried out to optimize each of these trial structures. Based on both the analysis of the ensemble of optimized trial structures and the density functional theory energy minimization of selected trial structures, the 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 is best described as belonging to the space group A2 1 am with unit cell dimensions of a = 9.01928(4), b = 27.1379(1), c = 10.73307(5). The 100 K unit cell has a large volume of 2627.07(2) Å 3 with Z = 12 and 33 independent crystallographic sites (9 Na, 3 V, 3 P, 12 O, and 6 F) that is 3x and 6x larger than the room- and high-temperature polymorphs of this phase, respectively. Finally, the novel methods described here will be generally applicable for the solution of the complex cation-ordered structures that commonly occur for battery materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electron Microscopy Studies of Soft Nanomaterials

This review highlights recent efforts on applying electron microscopy (EM) to soft (including biological) nanomaterials. We will show how developments of both the hardware and software of EM have enabled new insights into the formation, assembly, and functioning (e.g., energy conversion and storage, phonon/photon modulation) of these materials by providing shape, size, phase, structural, and chemical information at the nanometer or higher spatial resolution. Specifically, we first discuss standard real-space two-dimensional imaging and analytical techniques which are offered conveniently by microscopes without special holders or advanced beam technology. The discussion is then extended to recent advancements, including visualizing three-dimensional morphology of soft nanomaterials using electron tomography and its variations, identifying local structure and strain by electron diffraction, and recording motions and transformation by in situ EM. On these advancements, we cover state-of-the-art technologies designed for overcoming the technical barriers for EM to characterize soft materials as well as representative application examples. Here, the even more recent integration of machine learning and its impacts on EM are also discussed in detail. With our perspectives of future opportunities offered at the end, we expect this review to inspire and stimulate more efforts in developing and utilizing EM-based characterization methods for soft nanomaterials at the atomic to nanometer length scales in academic research and industrial applications.

Imaging↗
DOE OSTI2020

TeraChem Cloud: A High-Performance Computing Service for Scalable Distributed GPU-Accelerated Electronic Structure Calculations

The encapsulation and commoditization of electronic structure arise naturally as interoperability, and the use of nontraditional compute resources (e.g., new hardware accelerators, cloud computing) remains important for the computational chemistry community. Here, we present TERACHEM CLOUD, a high-performance computing service (HPCS) that offers on-demand electronic structure calculations on both traditional HPC clusters and cloud-based hardware. The framework is designed using off-the-shelf web technologies and containerization to be extremely scalable and portable. Within the HPCS model, users can quickly develop new methods and algorithms in an interactive environment on their laptop while allowing TERACHEM CLOUD to distribute ab initio calculations across all available resources. This approach greatly increases the accessibility of hardware accelerators such as graphics processing units (GPUs) and flexibility for the development of new methods as additional electronic structure packages are integrated into the framework as alternative backends. Cost-performance analysis indicates that traditional nodes are the most cost-effective long-term solution, but commercial cloud providers offer cutting-edge hardware with competitive rates for short-term large-scale calculations. We demonstrate the power of the TERACHEM CLOUD framework by carrying out several showcase calculations, including the generation of 300,000 density functional theory energy and gradient evaluations on medium-sized organic molecules and reproducing 300 fs of nonadiabatic dynamics on the B800-B850 antenna complex in LH2, with the latter demonstration using over 50 Tesla V100 GPUs in a commercial cloud environment in 8 h for approximately $1250.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Atomic and Molecular Adsorption on Ag(111)

The adsorption of atomic (H, C, N, O, S) and molecular (OH, CH x , NH x , CO, NO, CN, N 2 , HNO, NOH, HCN, x = 1–3) species at 1/4 monolayer coverage on an extended Ag(111) surface was studied here using periodic density functional theory. Geometries and energies were calculated self-consistently using the PW91 functional; nonself-consistent energies using the RPBE functional are also provided. We analyze the binding energies, binding geometries, estimated diffusion barriers, harmonic vibrational frequencies, and energetic and geometric deformation parameters of these adsorbates, comparing them to experimental and theoretical results whenever possible. PW91 gives binding energies that match experimental binding energies more closely than RPBE, which consistently predicts weaker binding than PW91. The data were then used to construct and analyze thermochemistry-only potential energy pathways for the hydrocarbon-assisted and hydrogen-assisted selective catalytic reduction (SCR) of nitric oxide (NO). These analyses provide preliminary insights into the possible mechanistic paths of the SCR of NO on Ag(111). Specifically, we show that deep dehydrogenation leading to the formation of atomic intermediates is not favored on Ag(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Unconventional Complex Coacervation between Neutral Polymer and Inorganic Polyoxometalate in Aqueous Solution via Direct Water Mediation

Water, specifically in a hydration shell, is critical for many biological supramolecular aggregations in nature, where water can directly mediate intermolecular association via hydrogen bonding and is regarded as “structured water”. Conversely, little has been reported on the biomimetic water-mediated supramolecular assembly with adequately high water content to date, because of the competing thermodynamic processes of water hydration and water as a building block to participate in self-assembly. In this work, we explore water-mediated complexation based on entropy-driven biphasic coacervate formation using highly hydrophilic neutral polymer and inorganic mineral-analogous nanoclusters. For the first time (to the best of our knowledge), nonelectrostatic liquid–liquid separating coacervate formation is demonstrated between polyethylene glycol (PEG) and polyoxometalate (POM) nanoclusters in aqueous solutions of varied PEG and POM concentrations, POM types, and aqueous medium conditions. Comprehensive characterization using fluorescence microscopy, small-angle X-ray scattering, calorimetry, and other techniques has confirmed that the compositions, microstructure, and thermodynamics of PEG–POM complex coacervation are highly similar to entropy-driven complex coacervation between oppositely charged polyelectrolytes in aqueous solution. However, the effect of heavy water on critical POM concentration for the onset of coacervate formation suggests that water, instead of the counter ions as commonly debated for polyelectrolyte complex coacervation, is responsible for PEG–POM coacervate formation. Specifically, structured water works as a hydrogen bond donor for both highly hydrated PEG and POM to directly mediate the PEG–water–POM association, resulting in the release of excess hydrated water for entropy-driven PEG–POM complex coacervation. Furthermore, water-mediated complex coacervation could be developed as a general and simple strategy to build biomimetic hybrid nanomaterials with high water content for various applications from energy-related functional nanomaterials to biomedical ramification.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanoscale Size Effects on Push–Pull Fe–O Hybridization through the Multiferroic Transition of Perovskite ϵ-Fe 2 O 3

Multiferroics have tremendous potential to revolutionize logic and memory devices through new functionalities and energy efficiencies. To reach their optimal capabilities will require better understanding and enhancement of the ferroic orders and couplings. In this work, we use ϵ-Fe 2 O 3 as a model system with a simplifying single magnetic ion. Using 15, 20, and 30 nm nanoparticles, we identify that a modified and size-dependent Fe–O hybridization changes the spin–orbit coupling and strengthens it via longer octahedra chains. Fe–O hybridization is modified through the incommensurate phase, with a unique two-step rearrangement of the electronic environment through this transition with attraction and then repulsion of electrons around tetrahedral Fe. Interestingly, size effects disappear in the high-temperature phase where the strongest Fe–O hybridization occurs. By manipulating this hybridization, we tune and control the multiferroic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

The Kinetic Consequences of Water on Catalytic Methane Pyrolysis

Hydrogen production from biomass and natural gas has emerged as a prominent research area in response to the growing demand for energy from alternative sources that minimize CO 2 emissions. In this study, we investigate the impact of water, which is present in and generated from biomass-derived streams, on carbon nanotube (CNT) growth and hydrogen production during methane decomposition using Ni–Mo/MgO as a catalyst. We reveal here that the role of water on CNT growth is highly complex; its effect depends on the stage of growth at which the water is incorporated. When water is introduced at the beginning of methane decomposition ( t = 0 h), methane conversion rates are negatively impacted. We hypothesize that water inhibits the significant phase changes the Ni–Mo/MgO catalyst undergoes during catalyst carburization. In contrast, the incorporation of a small percentage of water after a stabilization period ( t = 3 h) results in methane conversion rate enhancements that scale with the introduced water partial pressure as water selectively reacts with amorphous carbon deposits that lead to catalyst deactivation, thus prolonging the lifetime of some of the most active sites. Moreover, water incorporation after stabilization significantly reduces the apparent activation energy. Density Functional Theory (DFT) calculations reveal that water preferentially interacts with carbon fragments on the catalyst surface to remove carbon deposits with a barrier lower than that required for methane activation, further supporting its role in cleaning active sites on the catalyst surface. Characterization of the resulting carbon nanotubes reveals the formation of more graphitic materials produced in the presence of water, highlighting the impact of water on nanotube properties. These results provide clarity toward the many ways in which water, or cofeeding of biomass-derived materials, may impact catalytic methane pyrolysis rates.

carbon nanotubes↗
DOE OSTI2017

Computationally-Guided Synthetic Control over Pore Size in Isostructural Porous Organic Cages

The physical properties of 3-D porous solids are defined by their molecular geometry. Hence, precise control of pore size, pore shape, and pore connectivity are needed to tailor them for specific applications. However, for porous molecular crystals, the modification of pore size by adding pore-blocking groups can also affect crystal packing in an unpredictable way. This precludes strategies adopted for isoreticular metal-organic frameworks, where addition of a small group, such as a methyl group, does not affect the basic framework topology. Here, we narrow the pore size of a cage molecule, CC3, in a systematic way by introducing methyl groups into the cage windows. Computational crystal structure prediction was used to anticipate the packing preferences of two homochiral methylated cages, CC14-R and CC15-R, and to assess the structure-energy landscape of a CC15-R/CC3-S cocrystal, designed such that both component cages could be directed to pack with a 3-D, interconnected pore structure. The experimental gas sorption properties of these three cage systems agree well with physical properties predicted by computational energy-structure-function maps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interface Evolutionand Long-Term Performance of NegativeCarbon Fiber Structural Electrodes

Abstract Laminated structural batteries present a transformative solution to reducing weight constraints in electric vehicles. These structural batteries are based on a multifunctional material that incorporates an energy storage function within a carbon fiber-reinforced polymer. Despite the potential of this technology, the intricate morphology of fiber–matrix or electrode–electrolyte interfaces and the impact of long-term cycling at low current rates (C-rates) on these interfaces remain insufficiently understood. This study addresses these critical knowledge gaps by examining the influence of matrix composition on the long-term electrochemical performance of structural battery electrodes and exploring advanced techniques to investigate carbon fiber–matrix interfaces. Localized imaging and X-ray scattering techniques were used to characterize morphological changes at the electrode–electrolyte interfaces by analyzing negative structural electrodes. The findings revealed that the matrix composition influences long-term electrochemical behavior and fiber–matrix interface formation. While the intrinsic properties of carbon fibers largely remain unaffected by long-term cycling, cycling promotes debonding at fiber–matrix interfaces. Nonetheless, residual regions of adhesion persist, underscoring the potential for preserving multifunctionality even under prolonged cycling conditions. These insights advance the understanding of interface dynamics, which is critical for optimizing structural battery technologies.

Chemistry↗
DOE OSTI2017

Metabolic versatility of small archaea Micrarchaeota and Parvarchaeota

Small acidophilic archaea belonging to Micrarchaeota and Parvarchaeota phyla are known to physically interact with some Thermoplasmatales members in nature. However, due to a lack of cultivation and limited genomes on hand, their biodiversity, metabolisms, and physiologies remain largely unresolved. For this study, we obtained 39 genomes from acid mine drainage (AMD) and hot spring environments around the world. 16S rRNA gene based analyses revealed that Parvarchaeota were only detected in AMD and hot spring habitats, while Micrarchaeota were also detected in others including soil, peat, hypersaline mat, and freshwater, suggesting a considerable higher diversity and broader than expected habitat distribution for this phylum. Despite their small genomes (0.64-1.08 Mb), these archaea may contribute to carbon and nitrogen cycling by degrading multiple saccharides and proteins, and produce ATP via aerobic respiration and fermentation. Additionally, we identified several syntenic genes with homology to those involved in iron oxidation in six Parvarchae ota genomes, suggesting their potential role in iron cycling. However, both phyla lack biosynthetic pathways for amino acids and nucleotides, suggesting that they likely scavenge these biomolecules from the environment and/or other community members. Moreover, low-oxygen enrichments in laboratory confirmed our speculation that both phyla are microaerobic/anaerobic, based on several specific genes identified in them. Furthermore, phylogenetic analyses provide insights into the close evolutionary history of energy related functionalities between both phyla with Thermoplasmatales. These results expand our understanding of these elusive archaea by revealing their involvement in carbon, nitrogen, and iron cycling, and suggest their potential interactions with Thermoplasmatales on genomic scale.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Towards actinide heterostructure synthesis and science

Controlling dimensionality and strain in actinide heterojunctions will provide unrivaled opportunities for exploring novel quantum phenomena. We discuss the promises, challenges, and synthesis routes for these actinide-bearing heterostructures with complex electron correlation for functional and energy materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗