Search NASA⌕ Search

SEARCH · Search NASA

Results for “etching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

EELS Studies of Cerium Electrolyte Reveal Substantial Solute Concentration Effects in Graphene Liquid Cells

Graphene liquid cell transmission electron microscopy is a powerful technique to visualize nanoscale dynamics and transformations at atomic resolution. However, the solution in liquid cells is known to be affected by radiolysis, and the stochastic formation of graphene liquid cells raises questions about the solution chemistry in individual pockets. In this study, electron energy loss spectroscopy (EELS) was used to evaluate a model encapsulated solution, aqueous CeCl 3 . First, the ratio between the O K-edge and Ce M-edge was used to approximate the concentration of cerium salt in the graphene liquid cell. It was determined that the ratio between oxygen and cerium was orders of magnitude lower than what is expected for a dilute solution, indicating that the encapsulated solution is highly concentrated. To probe how this affects the chemistry within graphene liquid cells, the oxidation of Ce 3+ was measured using time-resolved parallel EELS. Here, it was determined that Ce 3+ oxidizes faster under high electron fluxes, but reaches the same steady-state Ce 4+ concentration regardless of flux. The time-resolved concentration profiles enabled direct comparison to radiolysis models, which indicate rate constants and g-values of certain molecular species are substantially different in the highly concentrated environment. Finally, electron flux-dependent gold nanocrystal etching trajectories showed that gold nanocrystals etch faster at higher electron fluxes, correlating well with the Ce 3+ oxidation kinetics. Understanding the effects of the highly concentrated solution in graphene liquid cells will provide new insight on previous studies and may open up opportunities to systematically study systems in highly concentrated solutions at high resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multicomponent Nanomaterials with Complex Networked Architectures from Orthogonal Degradation and Binary Metal Backfilling in ABC Triblock Terpolymers

Selective degradation of block copolymer templates and backfilling the open mesopores is an effective strategy for the synthesis of nanostructured hybrid and inorganic materials. Incorporation of more than one type of inorganic material in orthogonal ways enables the synthesis of multicomponent nanomaterials with complex yet well-controlled architectures; however, developments in this field have been limited by the availability of appropriate orthogonally degradable block copolymers for use as templates. We report the synthesis and self-assembly into cocontinuous network structures of polyisoprene-block-polystyrene-block-poly(propylene carbonate) where the polyisoprene and poly(propylene carbonate) blocks can be orthogonally removed from the polymer film. Through sequential block etching and backfilling the resulting mesopores with different metals, we demonstrate first steps toward the preparation of three-component polymer–inorganic hybrid materials with two distinct metal networks. Multiblock copolymers in which two blocks can be degraded and backfilled independently of each other, without interference from the other, may be used in a wide range of applications requiring periodically ordered complex multicomponent nanoarchitectures.

36 MATERIALS SCIENCE↗

Kinetics for the Sequential Infiltration Synthesis of Alumina in Poly(methyl methacrylate): An Infrared Spectroscopic Study

Sequential infiltration synthesis (SIS) is a method for growing inorganic materials within polymers in an atomically controlled fashion. This technique can increase the etch resistance of optical, electron-beam, and block copolymer (BCP) lithography resists and is also a flexible strategy for nanomaterials synthesis. Despite this broad utility, the kinetics of SIS remain poorly understood, and this knowledge gap must be bridged in order to gain firm control over the growth of inorganic materials inside polymer films at a large scale. In this paper, we explore the reaction kinetics for Al 2 O 3 SIS in PMMA using in situ Fourier transform infrared spectroscopy. First, we establish the kinetics for saturation adsorption and desorption of trimethyl aluminum (TMA) in PMMA over a range of PMMA film thicknesses deposited on silicon substrates. These observations guide the selection of TMA dose and purge times during SIS lithography to achieve robust organic/inorganic structures. Next, we examine the effects of TMA desorption on BCP lithography by performing SIS on silicon surfaces coated with polystyrene-block-poly(methyl methacrylate) films. After etching the organic components, the substrates are examined using scanning electron microcopy to evaluate the resulting Al 2 O 3 patterns. Finally, we examine the effects of temperature on Al 2 O 3 SIS in PMMA to elucidate the infiltration kinetics. The insights provided by these measurements will help extend SIS lithography to larger substrate sizes for eventual commercialization and expand our knowledge of precursor-polymer interactions that will benefit the SIS of a wide range of inorganic materials in the future.

Biswas, Mahua↗

Morphology Mapping of Phase-Separated Polymer Films Using Nanothermal Analysis

Polymers films are attractive, in part, because their physical properties can be tuned by blending polymer with complementary characteristics. However, blending is typically challenging because most polymers will undergo phase separation, resulting in unpredictable behavior. Here, we introduce band excitation nanothermal analysis (BE-NanoTA) as a nondestructive AFM-based technique for mapping the near surface, thermal properties of polymeric coatings. BE-NanoTA was used to investigate phase separation and domain growth in poly(styrene-ran-acrylonitrile):poly(methyl methacrylate) SAN:PMMA films. The size and shape of PMMA-rich domains are consistent with prior measurements on the same system using a destructive method, namely UV-ozone etching of PMMA followed by topography mapping using standard AFM. Moreover, new insights into the mechanism of phase separation were uncovered including the observation of SAN- and PMMA-rich channels near the surface at early times as well as small SAN-rich domains trapped within large PMMA domains during intermediate times. Because it is nondestructive, BE-NanoTA can be used to explore in situ phase evolution in soft matter systems (e.g., polymer nanocomposites) which do not lend themselves to the UV-ozone etching method

Nikiforov, Maxim↗

The formation mechanism for printed silver-contacts for silicon solar cells

Screen-printing provides an economically attractive means for making Ag electrical contacts to Si solar cells, but the use of Ag substantiates a significant manufacturing cost, and the glass frit used in the paste to enable contact formation contains Pb. To achieve optimal electrical performance and to develop pastes with alternative, abundant, and non-toxic materials requires understanding the contact formation process during firing. Here, we use in-situ X-ray diffraction during firing to reveal the reaction sequence. The findings suggest that between 500 degrees C and 650 degrees C PbO in the frit etches the SiNx antireflective-coating on the solar cell, exposing the Si surface. Then, above 650 degrees C, Ag+ dissolves into the molten glass frit -- key for enabling deposition of metallic Ag on the emitter surface and precipitation of Ag nanocrystals within the glass. Ultimately, this work clarifies contact formation mechanisms and suggests approaches for development of inexpensive, nontoxic solar cell contacting pastes.

14 SOLAR ENERGY↗

A neural master equation framework for multiscale modeling of molecular processes: application to atomic-scale plasma processes

Plasma-surface interactions (PSI) play a crucial role in microelectronics fabrication; however, their multiscale nature and array of complex, often unknown interactions make computational modeling of PSIs extremely difficult. To this end, we propose a general neural master equation (NME) framework that uses master equations to describe the dynamics of a molecular process, wherein neural networks learned from atomistic simulations represent unknown transitions between different system states. By leveraging the physics-based structure of master equations and data-driven state transitions, the NME framework promotes generalizability and physics interpretability, and can bridge disparate length and time scales. The framework is demonstrated for multiscale modeling of Si atomic layer etching and reactive ion etching, where the learned NME-based surface kinetic models exhibit good predictive and extrapolative capabilities for predicting experimentally relevant observables as a function of process parameters. The NME-based surface kinetic models obey physical constraints, which are violated in models based on neural ordinary differential equations. The proposed NME framework for multiscale modeling of molecular processes can pave the way for the discovery of new chemistries and materials in atomic-scale plasma processes.

Chemical engineering↗

Very High Refractive Index Transition Metal Dichalcogenide Photonic Conformal Coatings by Conversion of ALD Metal Oxides

Materials for nanophotonic devices ideally combine ease of deposition, very high refractive index, and facile pattern formation through lithographic templating and/or etching. In this work, we present a scalable method for producing high refractive index WS 2 layers by chemical conversion of WO 3 synthesized via atomic layer deposition (ALD). These conformal nanocrystalline thin films demonstrate a surprisingly high index of refraction (n > 3.9), and structural fidelity compatible with lithographically defined features down to ~10 nm. Although this process yields highly polycrystalline films, the optical constants are in agreement with those reported for single crystal bulk WS 2 . Subsequently, we demonstrate three photonic structures - first, a two-dimensional hole array made possible by patterning and etching an ALD WO 3 thin film before conversion, second, an analogue of the 2D hole array first patterned into fused silica before conformal coating and conversion, and third, a three-dimensional inverse opal photonic crystal made by conformal coating of a self-assembled polystyrene bead template. Furthermore these results can be trivially extended to other transition metal dichalcogenides, thus opening new opportunities for photonic devices based on high refractive index materials.

36 MATERIALS SCIENCE↗

Nanofabrication on unconventional substrates using transferred hard masks

Here, a major challenge in nanofabrication is to pattern unconventional substrates that cannot be processed for a variety of reasons, such as incompatibility with spin coating, electron beam lithography, optical lithography, or wet chemical steps. Here, we present a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology. These masks, transferred precisely onto targeted regions, can be in the millimetre scale. They allow for fabrication on a wide range of substrates, including rough, soft, and non-conductive materials, enabling feature linewidths down to 10 nm. Plasma etching, lift-off, and ion implantation are realized without the need for scanning electron/ion beam processing, UV exposure, or wet etching on target substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extraordinary optical transmission in nanopatterned ultrathin metal films without holes

In this study, we experimentally and theoretically demonstrate that a continuous gold film on a periodically textured substrate exhibits extraordinary optical transmission, even though no holes were etched in the film. Our film synthesis started by nanoimprinting a periodic array of nanocups with a period of ~750 nm on a polystyrene film over a glass substrate. A thin non-conformal gold film was sputter-deposited on the polystyrene by angle-directed deposition. The gold film was continuous with spatial thickness variation, the film being thinnest at the bottom of the nanocup. Measurements revealed an extraordinary transmission peak at a wavelength just smaller than the period, with an enhancement of ~2.5 compared to the classically expected value. Scattering matrix simulations model well the transmission and reflectance measurements when an ultrathin gold layer (~5 nm), smaller than the skin depth is retained at the bottom of the nanocups. Electric field intensities are enhanced by >100 within the nanocup, and ~40 in the ultrathin gold layer causing transmission through it. We show a wavelength red-shift of ~30 nm in the extraordinary transmission peak when the nanocups are coated with a thin film of a few nanometers, which can be utilized for biosensing. The continuous corrugated metal films are far simpler structures to observe extraordinary transmission, circumventing the difficult process of etching the metal film. Such continuous metal films with ultrathin regions are simple platforms for non-linear optics, plasmonics, and biological and chemical sensing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective sequential infiltration synthesis of ZnO in the liquid crystalline phase of silicon-containing rod-coil block copolymers

The combination of block copolymer (BCP) thin film self-assembly and selective infiltration synthesis of inorganic materials into one BCP block provides access to various organic–inorganic hybrids. Here, we apply sequential infiltration synthesis, a vapor-phase hybridization technique, to selectively introduce ZnO into the organic microdomains of silicon-containing rod-coil diblock copolymers and a triblock terpolymer, polydimethylsiloxane (PDMS)-b-poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS-b-PMPCS) and PDMS-b-polystyrene-b-PMPCS (PDMS-b-PS-b-PMPCS), in which the PMPCS rod block is a liquid crystalline polymer. The in-plane cylindrical PDMS-b-PMPCS and core–shell cylindrical and hexagonally perforated lamellar PDMS-b-PS-b-PMPCS films were infiltrated with ZnO with high selectivity to the PMPCS. The etching contrast between PDMS, PS and the ZnO-infused PMPCS enables the fabrication of ZnO/SiO x binary composites by plasma etching and reveals the core–shell morphology of the triblock terpolymer.

36 MATERIALS SCIENCE↗

Investigations of the stability of GaAs for photoelectrochemical H 2 evolution in acidic or alkaline aqueous electrolytes

The long-term stability of p-GaAs photocathodes has been investigated for the hydrogen-evolution reaction (HER) in contact with either 1.0 M H 2 SO 4 (aq) or 1.0 M KOH(aq). Stability for the HER was evaluated using p-GaAs electrodes that were either etched or coated with active HER catalysts (Pt and CoP). Changes in surface characteristics of GaAs after exposure to electrochemical conditions were monitored by X-ray photoelectron spectroscopy (XPS), and electrode dissolution processes were evaluated by inductively coupled plasma mass spectrometry (ICP-MS). Consistent with thermodynamic predictions, after operation of the HER at pH 0 or pH 14, illuminated etched p-GaAs electrodes exhibited minimal dissolution while preserving a nearly stoichiometric surface. Electrodeposition or sputtering of Pt on the p-GaAs surface promoted the formation of excess As 0 via an interfacial reaction during the HER. The resulting non-stoichiometric As 0 -rich surface of p-GaAs/Pt electrodes caused a loss in photoactivity as well as substantial cathodic dark current. In contrast, p-GaAs electrodes coated with thin-film CoP catalysts did not display an increase in surficial As 0 after operation of the HER in acidic electrolytes. Minimization of deleterious interfacial reactions is thus critical to obtain extended stability in conjunction with high performance from p-GaAs photocathodes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Block copolymer self-assembly to pattern gold nanodots for site-specific placement of DNA origami and attachment of nanomaterials

Directed placement of DNA origami could play a key role in future integrated nanoelectronic devices. Here we demonstrated the site-selective attachment of DNA origami on gold dots formed using a pattern transfer method through block copolymer self-assembly. First, a random copolymer brush layer is grafted on the Si surface and then poly (styrene-b-methylmethacrylate) block copolymer is spin-coated to give a hexagonal nanoarray after annealing. UV irradiation followed by acetic acid etching is used to remove the PMMA, creating cylindrical holes and then oxygen plasma etching removes the random copolymer layer inside those holes. Next, metal evaporation, followed by lift-off creates a gold dot array. We evaluated different ligand functionalization of Au dots, as well as DNA hybridization to attach DNA origami to the nanodots. DNA-coated Au nanorods are assembled on the DNA origami as a step towards creating nanowires and to facilitate electron microscopy characterization of the attachment of DNA origami on these Au nanodots. The DNA hybridization approach showed better DNA attachment to Au nanodots than localization by electrostatic interaction. Here, this work contributes to the understanding of DNA-templated assembly, nanomaterials, and block copolymer nanolithography. Furthermore, the work shows potential for creating DNA-templated nanodevices and their placement in ordered arrays in future nanoelectronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Recent efforts of vapour-phase strategies for EUV resist toward high- and hyper-NA extreme ultraviolet lithography

Extreme ultraviolet lithography (EUVL, λ = 13.5 nm) is critical for sub-1 nm technology nodes but remains constrained by inherent trade-offs among resolution, line-edge roughness (LER), and sensitivity. Stochastic effects originating from photon shot noise, low-energy secondary electron blur, and the random distribution of resist components further limit its advancement toward high numerical-aperture (NA, NA = 0.55) and hyper-NA (NA ≥0.75) EUVL. While the optimization of spin-on chemically amplified resists (CARs) continues, metal-oxide resists (MORs) have emerged as strong candidates for next-generation EUVL by incorporating metals with high EUV absorption coefficients, which enhances both resist sensitivity and etch resistance during pattern transfer. Besides spin-coating, recent advances in vapour-phase techniques, such as vapour-phase infiltration (VPI), chemical vapour deposition (CVD), and molecular atomic layer deposition (MALD), offer promising pathways to achieve new resist platforms, such as dry resists, that satisfy the stringent thickness and uniformity requirements of next-generation EUVL. These methods enable the direct incorporation of metal species into existing resist matrices or the formation of hybrid inorganic–organic resist platforms, thereby improving film uniformity, etch durability, and pattern fidelity while mitigating stochastic defects. This review highlights the latest advancements in vapour-phase-synthesized EUV resists, emphasizing material design, lithographic performance, and the underlying exposure mechanisms. Although still emerging, vapour-phase strategies are paving the way for an all-dry integration framework that could improve EUV patterning workflows and meet the demands of future technology nodes.

36 MATERIALS SCIENCE↗

Simple Kinetic Monte Carlo Models for Dissolution Pitting Induced by Crystal Defects

The solid-on-solid kinetic Monte Carlo model of Lasaga and Blum for dislocation- controlled etch pit growth has been extended to the growth of etch pits under the control of multiple dislocations and point defects. This has required the development of algorithms that are 0(103) – O(104) times faster than primitive kinetic Monte Carlo models for surfaces with areas in the range 1024x1024 – 4096x4096 lattice sites. Simulations with multiple line defects indicate that the surface morphology coarsens with increasing time and that the coarsening is more pronounced for large bond-breaking activation energies. For small bond breaking activation energies dissolution enhanced by line defects perpendicular the dissolving surface results in pits with steep sides terminated by deep narrow hollow tubes (nanopipes). Larger bond breaking activation energies lead to shallow pits without deep nanopipes, and if the bond breaking activation energy is large enough, step flow is the primary dissolution mechanism, and pit formation is suppressed. Simplified models that neglect the far field strain energy density but include either a rapidly dissolving core or an empty core lead to results that are qualitatively similar to those obtained using models that include the effects of the far field stress and strain. Simulations with a regular array of line defects show that microscopic random thermal fluctuations play an important role in the coarsening process.

36 MATERIALS SCIENCE↗

Characterization of a Surface-Flashover Ion Source with 10-250 ns Pulse Widths

As a step towards developing an ultra compact D-D neutron source for various defense and homeland security applications, a compact ion source is needed. Towards that end, we are testing a pulsed, surface flashover source, with deuterated titanium films deposited on alumina substrates as the electrodes. An electrochemically-etched mask was used to define the electrode areas on the substrate during the sputtered deposition of the titanium films. Deuterium loading of the films was performed in an all metal-sealed vacuum chamber containing a heated stage. Deuterium ion current from the source was determined by measuring the neutrons produced when the ions impacted a deuterium-loaded target held at -90 kV. As the duration of the arc current is varied, it was observed that the integrated deuteron current per pulse initially increases rapidly, then reaches a maximum near a pulse length of 100 ns.

43 PARTICLE ACCELERATORS↗

Power balance and wall erosion measurements in a helicon plasma

The power balance measurements in a 1 kW argon helicon plasma discharge are demonstrated. The quantitative wall heat flux measurements using nonintrusive infrared imaging of the glass tube surface, along with data from bolometric probes and calibrated photodiodes to measure heat flux from the rest of the plasma, are shown. For the cylindrical discharge, with radius much less than the axial length, approximately 15% of 1 kW input power is lost in the transmission lines and matching network, 54% is lost through radial particle transport to the walls, 16% is lost through radiation, and 8% is lost through ion impact in the vicinity of the antenna. Wall erosion of the confining glass tube occurs due to sputter etching by ions accelerated in the electrostatic fields produced by the antenna. Wall etch rate measurements are used to quantify particle fluxes to the wall, which are in rough agreement with particle fluxes calculated from thermal flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗